• Stable firmware for xiaomi mi5 s. Installing official firmware. Installing custom firmware

    The Chinese gadget manufacturer Xiaomi has always been famous for its devices, which were in no way inferior in capabilities to their competitors, but at the same time cost two or even three times less. The hero of our article today, Xiaomi Mi 5, is an affordable flagship; at the time of release it cost only about $300, which is not at all a lot for flagship characteristics: Snapdragon 820, 3/4 GB RAM, NFC and everything like that. Now this smartphone is popular in the secondary market and there you can pick it up for very little money. But when buying a smartphone secondhand, you can buy a device with absolutely any incomprehensible firmware. And what to do in this case? The answer is simple - flash it. How to flash Xiaomi Mi 5? Now you will find out.

    Xiaomi Mi 5 firmware on MIUI

    First, it’s worth understanding a couple of basic points: you do all the manipulations at your own peril and risk, and the device’s firmware will be flashed only after the bootloader has been officially unlocked, because it’s safer and less likely to get bricked.

    Let's start with unlocking the bootloader, because without it you can't normally use the XiaoMiFlash utility, which we will use to flash our smartphone with the latest version of MIUI. The process of unlocking the bootloader COMPLETELY DELETES ALL DATA ON THE DEVICE.

    Unlocking the bootloader

    Launch Mi Flash Unlock and log in through your account. We connect our smartphone in fastboot mode (in the off state we hold down power button And volume down) and we see that the phone has booted into the mode we need.

    The program will automatically recognize your smartphone and offer unlocking. Press the “Unlock” button and the program will begin the process of unlocking the bootloader. Afterwards it will display a message about successful unlocking, writing the message “Unlocked successfully”.

    Yes, this process takes a long time, but by doing everything this way, you avoid possible problems with subsequent firmware updates or problems with poor performance of some applications. Again: I highly recommend using the official bootloader unlocking methods.

    Installing MIUI

    First we need to download the firmware we need. To do this, go to the MIUI forum and select the firmware we need there (link to firmware for xiaomi mi 5). Download the required firmware and unzip it into the root folder of drive “C” (you can also go to another one, but be careful about the length of the address). It is advisable to use WinRar to extract the firmware. So, we have extracted the firmware, now we need to download the utility for flashing the firmware of the smartphone itself, we will use Mi Flash, download it from this link and install it. I note that the necessary drivers will be installed along with the program, so you don’t have to worry about drivers.

    1. Turn off the smartphone and put it into fastboot mode (press and hold the “power” and “volume -” buttons). FASTBOOT will appear on the phone screen. We connect the phone to the computer.
    2. You need to copy the address to the extracted firmware; to do this, find the folder with the firmware in Explorer and copy the address, as shown in the picture.

    1. Launch MiFlash. Now you need to paste the copied address into the program’s address bar (highlighted in blue) and click on the update button (highlighted in yellow). The program will automatically detect your smartphone and it will appear in the list of devices. To start the firmware, you need to click on the “flash” button (highlighted in red) and wait for the firmware to complete.

    Usually the firmware takes no more than five minutes. Immediately after the firmware is completed, the phone will automatically boot into the system. If this does not happen, then hold down the power button until the Mi logo appears.

    Installing custom firmware

    On Xiaomi Mi 5, custom firmware is extremely popular, and their number is simply difficult to count. The process of installing such firmware is fundamentally different from installing the official MIUI, so we’ll figure it out. The method described below requires unlocked bootloader.

    1. Download the firmware you need (usually they come in a .zip archive, you don’t need to unzip it) and copy it to the smartphone’s memory.
    2. We will flash it via TWRP, so you also need to download it (official website) and then install it on the device (see point 3). We also download the adb driver and extract it to drive “C”; you need to copy the downloaded recovery file (.img format) to the folder with adb.
    3. We connect the phone in fastboot mode to the computer. To install recovery on your phone, you need to run the command fastboot flash recovery twrp.img, where twrp.img is the name of the recovery file. The recovery is installed and now we boot into it: hold down the “power” and “volume +” buttons.
    4. Now in recovery you need to do Wipe data, factory reset. Go to the cleaning menu and select Data, Cache and Dalvik Cache, swipe to confirm. Now in the main menu go to the “Installation” section and select the previously copied firmware there, confirm the installation and wait for completion. If you need Google Apps, you can download them from the Opengapps website, choose exactly the package you need (nano or mini is recommended). You install Google services in the same way as the firmware, but you don’t need to do wipes.
    5. After all operations, reboot the smartphone and wait for the first download, which can last up to 15 minutes.

    That's all, the Xiaomi Mi 5 firmware is finished. Now you know how to flash your device, I hope everything went smoothly and without problems.

    Xiaomi Mi5S Plus 64Gb runs an operating system Android 6.0. Its performance is rated 5 out of 5 (in its segment). This smartphone is high-performance. Here are the characteristics of the device, instructions on how to reset the settings, flash the device and, of course, how to get root rights on Xiaomi

    Root Xiaomi Mi5S Plus 64Gb

    How to get root for Xiaomi Mi5S Plus 64Gb see instructions below.

    Below are universal programs for obtaining root rights for devices on Qualcomm Snapdragon

    • (need PC)
    • (Root using PC)
    • (popular)
    • (root in one click)

    If you could not obtain superuser (root) rights or the program did not appear (you can install it yourself) - ask a question in the topic. You may need to flash a custom kernel.

    Characteristics

    1. Type: smartphone
    2. Operating system: Android 6.0
    3. Case type: classic
    4. Case material: metal control: touch buttons
    5. SIM card type: nano SIM
    6. nNumber of SIM cards: 2
    7. Multi-SIM operating mode: alternating
    8. Weight: 168 g
    9. Dimensions (WxHxD): 77.7x154.6x7.95 mm
    10. Screen type: color IPS, 16.78 million colors, touch
    11. Touch screen type: multi-touch, capacitive
    12. Diagonal: 5.7 inches.
    13. Image size: 1920x1080
    14. Pixels per inch (PPI): 386
    15. Automatic screen rotation: yes
    16. Camera: 13 million pixels, LED flash
    17. Camera functions: autofocus, optical stabilization, macro mode
    18. Video recording: yes
    19. Max. video resolution: 3840x2160
    20. Max. video frame rate: 30 fps
    21. Geo Tagging: yes
    22. Front camera: yes, 4 million pixels.
    23. Dual camera: yes, the resolution of the second camera is 13 million pixels.
    24. Audio: MP3, AAC, WAV
    25. Headphone Jack: 3.5mm
    26. Standard: GSM n900/1800/1900, 3G, 4G LTE, LTE-A Cat. 12, VoLTE
    27. LTE bands support: FDD-LTE: 850, 900, 1800, 2100, 2600 MHz; nLTE-TDD: 1900, 2300, 2500, 2600 MHz
    28. Interfaces: Wi-Fi 802.11ac, Wi-Fi Direct, Bluetooth 4.2, IRDA, USB, NFC
    29. Satellite navigation: GPS/GLONASS/BeiDou
    30. A-GPS system: yes
    31. Processor: Qualcomm Snapdragon 821 MSM 8996 Pro, n2350 MHz
    32. Number of processor cores: 4
    33. Video processor: Adreno 530
    34. Built-in memory: 64 GB
    35. RAM capacity: 4 GB
    36. Battery type: Li-polymer
    37. Battery capacity: 3800 mAh
    38. Charging connector type: nUSB Type-C
    39. Fast charging function: yes
    40. Speakerphone (built-in speaker): control available: voice dialing, voice control
    41. Airplane mode: yes
    42. Sensors: light, proximity, Hall, gyroscope, compass, fingerprint reading
    43. Flashlight: yes
    44. USB host: yes
    45. RAW support: yes
    46. Features: Sony IMX258 camera sensor
    47. Announcement date: 2016-09-27

    »

    Firmware for Xiaomi Mi5S Plus 64Gb

    Official Android 6.0 firmware [stock ROM file] -
    Custom Xiaomi firmware -

    Firmware for Xiaomi Mi5S Plus 64Gb can be done in several ways. If the firmware file has not yet been uploaded here, then create a topic on the forum, in the section, specialists will help you and add the firmware. Don’t forget to write a 4-10 line review about your smartphone in the subject line, this is important. The official Xiaomi website, unfortunately, will not help solve this problem, but we will solve it for free. This Xiaomi model has a Qualcomm Snapdragon 821 MSM 8996 Pro, n2350 MHz on board, so there are the following flashing methods:

    1. Recovery - flashing directly on the device
    2. A special utility from the manufacturer, or
    We recommend the first method.

    What custom firmware are there?

    1. CM - CyanogenMod
    2. LineageOS
    3. Paranoid Android
    4. OmniROM
    5. Temasek's
    1. AICP (Android Ice Cold Project)
    2. RR (Resurrection Remix)
    3. MK(MoKee)
    4. FlymeOS
    5. Bliss
    6. crDroid
    7. Illusion ROMS
    8. Pacman ROM

    Problems and shortcomings of a Xiaomi smartphone and how to fix them?

    • If Mi5S Plus does not turn on, for example, you see a white screen, hangs on the screensaver, or the notification indicator only blinks (possibly after charging).
    • If stuck during update / stuck when turned on (needs flashing, 100%)
    • Doesn't charge (usually hardware problems)
    • Does not see the SIM card (SIM card)
    • The camera does not work (mostly hardware problems)
    • The sensor does not work (depends on the situation)
    For all these problems, contact (you just need to create a topic), specialists will help for free.

    Hard Reset for Xiaomi Mi5S Plus 64Gb

    1. Settings->Backup and reset
    2. Reset settings (at the very bottom)

    How to reset a pattern key

    How to reset the pattern if you forgot it and now you can’t unlock your Xiaomi smartphone. On the Mi5S Plus 64Gb model, the key or PIN code can be removed in several ways. You can also remove the lock by resetting the settings; the lock code will be deleted and disabled.

    1. Reset graph. blocking -
    2. Password reset -

    Xiaomi mobile phones are good, no matter how you look at them - they have performance, stylish appearance and an affordable price. One thing is not encouraging: if you get your hands on a Chinese version of a smartphone, you need to immediately worry about installing new firmware. Even if the manufacturer accompanies the device with the Global firmware version by default, the translation into Russian is poorly done. Therefore, to make your life easier, immediately install the Russian version of the firmware, leaving Global. Even if global firmware comes with a factory warranty, if you change it to custom firmware you may lose your warranty rights. With a competent approach to choosing software, this will not become a problem.

    Today we will look at the example of Xiaomi Mi 5S, how the phone’s firmware is changed. The procedure is not very complicated, so you can reflash Xiaomi Mi5 yourself. The main thing is to strictly follow the recommendations given below.

    We will install the firmware on Xiaomi Mi5 via a computer or laptop. First you need to download all the necessary programs onto it.

    1. – allows you to directly install new software on your Xiaomi Mi5 gadget. All necessary drivers will be installed immediately along with the program.
    2. Mi PC Suite and Android Studio guarantee that the computer correctly recognizes the phone in the system and runs it normally in EDL mode.
    3. Download the firmware from the official website.
      For Xiaomi Mi5 here - http://en.miui.com/download-299.html, for Mi5s here - http://en.miui.com/download-314.html.
      We download the stable Global version.

    All these files are downloaded, as a rule, from archives. Once the download is complete, unzip them. It is best to leave the files on drive C, but the most important thing is that the path to them should not contain Russian letters or spaces.

    If you are working with an OS from Windows 8 and higher, then you need to disable the driver digital signature verification function. Even if you do this, when launching drivers and Mi Flash, the system may warn you about working with drivers from unknown sources. This is normal, always agree to allow the installation to continue.

    We give gifts

    Preparing your phone

    We can flash the phone in EDL mode, into which the device must be switched. But first you will have to obtain developer rights in order to make changes to the system. To do this, go to the settings, see the “About phone” category, and then click on the “Miui version” column 5 times.

    Next, you can enable USB debugging. We return to the settings, find the item “Advanced” - “For Developers”. We activate this mode and the “USB Debugging” item.

    Putting Xiaomi into Fastboot mode

    1. Turn off your phone.
    2. Press the screen unlock and volume down buttons until you see a bunny on the Xiaomi Mi 5S monitor.
    3. In this form, Xiaomi Mi5 can already be connected to a computer via a USB cable.

    Switching to EDL mode

    On the computer, in the command line, you need to enter the command fastboot devices. This will allow you to check the connected device. If everything is in order and there is no need to additionally install any drivers (the system should detect them itself), then enter the fastboot oem edl command, activating the mode we need.

    How to install firmware

    When we have completed all the preparatory steps, all that remains is to find out how to flash Xiaomi and change the Global software to custom. We do the following:

    1. Launch the pre-installed MiFlash program.
    2. Click on the Refresh button so that the program recognizes the phone connected via cable.
    3. Using the Browse button we indicate the path to the new firmware.
    4. Click on Flash All and wait until the firmware is installed. This takes about three minutes.

    Turning on your smartphone

    You need to know not only how to update the system, but also how to turn on and configure the phone after that. This is done like this:

    1. Disconnect the phone from USB.
    2. Press the lock button until we feel the phone vibrate. You can let go when you see the Xiaomi logo on the screen.
    3. The updated system launches within 5-10 minutes. There is no need to be afraid, because all folders have been updated, including the root.

    After this, you can start setting up your phone from scratch! So don’t give up ordering Xiaomi smartphones through China. Installing Global firmware on them should not be confusing - just flash the device yourself, and the problem will be solved!

    Many smartphone owners don’t even think about what firmware their gadget runs on. But this happens until software problems arise and the need to install a new system occurs. This also has to be done when the manufacturer has stopped updating the device automatically. Let's look at how to install a new system on a Xiaomi MI5 smartphone so that the firmware works correctly.

    How to install firmware on Xiaomi MI5

    It is better to download the updated system on the manufacturer’s official website or on trusted sites and forums. Please note that the global MI5 firmware has a factory warranty and if you replace it with a homemade or modified one, the warranty is lost. Therefore, you need to carefully choose your phone software.

    The system is updated using a desktop computer or laptop with MiFLash, Mi PC Suite and Android Studio installed. Step-by-step work plan:

    1. In the settings, find the “About phone” tab and click on “MIUI version” 5 times.
    2. In the settings, select “Advanced”, then “For Developers” and make the EDL and “USB Debugging” items active.
    3. Turn off the device, then hold down the screen unlock and volume down buttons until the signature bunny appears.
    4. Connect the device to a laptop or computer via a USB connector.
    5. Check your phone by entering “fastboot devices” into the command line.
    6. If the computer sees it and does not require drivers, then issue the command “fastboot oem edl”.
    7. Launch the MiFlash program and click on Refresh to recognize the smartphone.
    8. Using the Browse button, set the path to the new software.
    9. Click on Flash All, complete installation will take approximately 3 minutes.

    Turning on your smartphone

    After installing a new system, it is important to turn on the device correctly. To do this, you need to disconnect it from USB and hold down the lock button so that the phone starts to vibrate. After a while, the Xiaomi logo will appear on the screen and the new system will begin to launch. The first time it can last up to 10 minutes. All folders are updated, including root. Now you can start setting up your smartphone from scratch.

    If the task of flashing the device’s firmware seems too complicated and you doubt that you can do it correctly, it is better to seek advice from specialists or think about purchasing a new phone.

    Read more: