Stationary caller ID. What is caller ID - how to activate the service on your mobile and choose a landline phone with caller ID. “Anti Caller ID on request” from MTS: details

With the Caller ID function, first of all inspect the telephone socket to which you are going to connect it. If it is made to the same standard as the plug on the device, nothing will be required. If not, change either the plug or the socket. The second, of course, is preferable.

When installing an old-style telephone plug instead of a modern one, cut the latter so that the piece of wire together with the cut plug has a length of about 20 centimeters. This will allow you to use it in the future for some other modern phone. Do not connect the two outermost wires of the cord anywhere. With the old-style plug pulled out of the socket with the screws facing you and the plastic pin facing down, connect the middle wires to the right contacts. Try closing the plug and then plugging it into the telephone jack. If after this the phone does not work, pull out the plug again, open the socket, and, without touching its contacts, look at which of them it is connected to, and then move the middle wires of the cord to these contacts. After that, close the plug again, connect it and check the operation of the device.

If, on the contrary, you want to connect a device with an old plug to a modern outlet, open the plug, unplug the wires from its terminals, then take a piece of cord with a modern plug at the end. Leave the outer wires of this cord not connected to anything, and the middle ones - to the wires coming out of the device. Insulate the connections, and then connect the device to the outlet.

Some phones with Caller ID are equipped with an AC power supply. Connect it to the lighting outlet before connecting the telephone cord to the telephone jack. If the device has a radio handset, place it on the base. If necessary, pair the handset with the base according to the instructions, and then wait a few hours for the battery in the handset to charge. Also, some phones with Caller ID do not have a battery power supply. Install them, observing the polarity, before connecting the device to the line.

Then set up the device. First of all, find in the instructions a description of how to select a number identification standard (domestic Caller ID or foreign DTMF). Choose the one that matches the standard adopted by your PBX. After this, set the exact time, the desired ringer volume, and for a domestic device, select the alert voice (male or female), as well as the alarm melody. Set the last trigger time.

Call yourself on a landline from your cell phone. The number must be determined. Remember that if you are using a domestic standard caller ID, at the time of detection, an imitation of picking up the handset will occur, and funds will begin to be debited from your cell phone account. In this case, only the last seven digits of the number will be determined.

Each of us has at least once encountered a situation where we needed to make a call anonymously, and the easiest way for Beeline subscribers is to hide your phone number. This service is called “Anti-Caller Identifier” or “Anti-Caller ID”.

Beeline Caller ID and Anti-ID

Sometimes the “Anti-Caller Identification” service is mistakenly called Caller ID, which is not entirely correct, since Caller ID stands for “Automatic Number Identifier”.

Automatic Caller ID (Caller ID)

Automatic ID allows you to see the caller's number on your phone screen. This service is enabled by default on most SIM cards, however, if it does not work for you, you can enable it manually in one of two ways:

Send a USSD request: *110*061#.
Call: 067409061, the answering machine will record your request.

The service is activated and maintained free of charge.

Beeline Anti-Caller Identifier (Anti-AON)

Caller ID will keep your phone number secret when calling.

To connect, dial: *110*071#, or: 067409071.

To disconnect, dial: *110*070#.

To check the service status, dial: *110*09# “call”.

To ensure that when the anti-identifier is turned on, your number will be taken away by the person you are calling, dial: *31#phone_number"challenge" Where “phone_number” is the full number of the called subscriber starting with +7 or 8.

The anti-identifier service is paid, its cost ranges from 3.77 rubles per day to 88 rubles per month, depending on your tariff plan - you can check with the support service for details.

Remember, anti-aon does not guarantee complete anonymity, since you can hide Beeline’s phone number (and any other operator) only for a while - if you wish, your number will be quite easy to find. For example, when sending sms or mms, your number will be displayed to the recipient.

How to determine a hidden Beeline phone number?

There are several ways to determine a Beeline phone number that is hidden:

1) Activate the Super Caller ID service and then you will see the phone number of the subscriber calling you, even if he has AntiAON connected.

To connect, dial: *110*4161# “call”, or 06744161.

To disconnect, dial: *110*4160#, or 06744160 “call”.

The cost of the service ranges from 50 rubles per day to 1,500 rubles per month, depending on your tariff plan; you can check details with the customer service center specialists by calling 0611.

Master's answer:

For the Caller ID function to work correctly, it is not enough to simply buy a telephone set and order the service at the PBX. You need to be able to correctly connect your phone to the network and configure the appropriate functions in it.

When you bring home the phone you just bought, the first thing you should do is inspect the outlet to which you want to connect the device. If they are the same, that is, made according to the same standard, then nothing extra will need to be done. But if the telephone plug does not fit into the socket, then change one or the other.

If you have an old-style socket, but the plug turns out to be modern, then cut the latter so that the cut piece of wire together with the plug has a total length of 20 centimeters. In the future, you can use it to connect some other phone. Do not connect the two outermost wires in the cord anywhere. With the screws facing the old-style plug and the plastic pin facing down, try connecting the middle wires to the right contacts. Now close the plug and try connecting it to the telephone socket. If after carrying out the procedure the phone does not work, then pull out the plug again and now open the socket. Look in it to which contacts the telephone line is connected and move the middle wires of the cord to the same contacts in the plug. Now close the plug, connect the socket back - the device should work.

If, on the contrary, you have a modern socket, but the plug on the device is old, then do the following. Open the plug, disconnect the wires from its terminals, now take a piece of cord with a modern plug at the end. Leave the outer wires of this cord, you don’t need them, but twist the middle ones with the wires coming out of the telephone set. Well insulate the connections and now you can connect the phone.

Some models of telephones with the Caller ID function are supplied with an AC power supply. If you have such a model, then before connecting the telephone cord to the outlet, turn on the phone to the electrical network. If you have a radio tube, place it on the base. If your phone model runs on batteries, then install them while observing the polarity.

Then it was time to set up the device. First, read the instructions that came with your phone about how to set up a function such as number identification. Choose a method that meets the standards adopted by your PBX. Then set the exact time on your phone, the required ringer volume and the corresponding melody. Set an alarm and a melody for it.

Now, to check whether you have configured Caller ID correctly, call your landline phone from your cell phone. When calling, a number must be identified. Please take into account that if you have a domestic standard caller ID, then at the moment when the caller’s number is determined, the phone simulates picking up the handset and funds will be debited from your cell phone account. In this case, only the last seven digits of the number are determined.

Content

When using mobile phones, people are accustomed to the fact that the caller is detected automatically. Installing call and caller data identifiers is more relevant for landline phones. This feature is important if you want to automatically find out who is calling when people hide their phone information for any reason.

Caller ID Megafon

The function is already in the custom package. The client of this telephone operator should not look for how to connect caller ID on Megafon. The display of operator subscriber data is automatic, but will not necessarily work if the caller has a different telecom operator or is roaming. You can disable telephone number identification in the help desk (0500). The Anti-AON function will help you hide information about yourself when calling, both one-time and on an ongoing basis. To do this, before the numbers of the person you are calling, dial *31#. However, this will already cost some money.

Beeline Caller ID

Beeline provides the following Caller ID service: it is possible to assign a unique melody to each contact in order to find out who will be in touch now. It also helps to find out what kind of calls they were for the last ones who couldn’t get through. There is no installation or use fee. This can be done by request *110*061#, and can also be added by dialing 0674 09 061.

MTS number identifier

CLIP technology allows the MTS caller ID function and its antagonist – anti-identifier – to work. If the first one is included in the service package by default, then hiding the cellular speaker is added when dialing *111*236#, with the help of a support employee or in your personal Internet account. There are some nuances - your mobile will be visible if:

send an SMS message;
use voicemail;
you will make an emergency call;
In the device settings, do not disable the function for determining your information.

Caller ID Tele2

The situation is similar with the Tele2 automatic caller ID. It is included in the service package for all service users. The telephone number identifier can be connected or deleted, and you can ask for help information by dialing *117*1#. The cost per use is zero. If you want to find out what kind of unknown, hidden subscriber is trying to reach you, you can use the request *210*1# for a fee.

Caller ID on your home phone

There are different phone caller ID standards. These are Caller ID and Caller ID - a symbol for the FSK and DTMF types. Users have questions about what Caller ID is on a phone, how it differs from other standards, and whether it is profitable to connect it. Answers: this is a technology in the device that allows you to identify the caller’s data on the device. Caller ID is common in the CIS, and Caller ID is common in the West. And if the first one detects the phone only after connection, then the second one detects it immediately. In addition to numbers, it displays the caller's first/last name or company name. Neither will indicate the region or city.

A landline telephone with caller ID and answering machine, with support for Caller ID and Caller ID, is a common occurrence in modern conditions. You can buy a separate set-top box for identification, then install and connect it if your wired or cordless phone does not have such a function. When you need to choose a standard, keep in mind that you can configure a phone with Caller ID yourself; Caller ID is a telephone network service that has its own cost. It identifies mobile and landline devices without picking up the handset in full format, displaying data on the display or in voice form.

The “Automatic Caller ID” option is designed to recognize the caller’s phone number by displaying it on the phone display. Thanks to Caller ID, the phone number is synchronized with the picture (photo) and ringtone set specifically for it. The service also makes it possible to easily view missed calls and dial the subscriber without looking for him in the address book. Read more about what Caller ID is and how to set it up below.

Caller ID service

Using the Caller ID method, telephone companies can determine who to bill for telecommunications services. Initially, the system was created to compile these accounts, but subsequently the scope of application was expanded, and now each subscriber can connect and configure Caller ID individually.

There are several standard systems for identifying the interlocutor's number in the world. In the CIS countries, Caller ID is used, and in the rest of the world the service is conventionally called Caller ID, which literally means “subscriber identification.” There are several differences between the two systems. Thus, Caller ID recognizes information about the caller even before the connection. Caller ID performs this operation during connection. Remember these long beeps or melody while waiting - this is when the number identification occurs. Caller ID is also a telephone network service that is designed specifically for use by subscribers, while Caller ID is used to charge long-distance calls.

How to connect caller ID

To connect automatic caller ID to MTS, use one of the following methods:

Create an SMS message with the text 2113 and send it to service number 111.
Dial the system combination *111*44# on your phone and press the call button.

This service is provided free of charge to all subscribers. The only exceptions are some tariff plans. More detailed information about this can be found on the operator’s official website.

The option will work correctly only in cases where calls are made within the home network. If you receive a call from another operator (Beeline, Tele2, etc.) or from a landline phone, number identification is not guaranteed.

Important: automatic number recognition will not occur if the person calling you has a paid Anti-AON option installed, which deliberately hides information.

To ensure that information about the person calling is always displayed in the most correct way, it is recommended to save his phone number in the address book in international format, using the prefix +7.

Disabling the Automatic Caller ID service occurs in almost the same way as activating it. You can use the Internet assistant or send an SMS message with the text 2113 to service number 111.

The main disadvantage of the modern Caller ID system is the fact that when the subscriber is still waiting for the interlocutor to pick up the phone and listening to the beeps, this time is paid at the same rate as the conversation itself. So even if the subscriber never picks up the phone, the money will still be debited from the account.

If your phone has a Caller ID installed, it can easily be identified by the characteristic clicking sound at the time of connection. Short beeps of varying tones may also be heard. However, despite all the shortcomings, the service has been extremely popular since the 90s of the last century, and is now relevant for modern mobile technology.