Tr link connection. How to properly configure a purchased wifi router from the tp link brand. Types of Wide Area Network connections

TP-Link Wi-Fi routers are rightfully considered one of the best - as a rule, they combine an affordable price and good quality. Among ordinary users, routers TL-WR841N or TL-WR841ND are especially popular. However, you need to understand that stable operation of the device is only possible if it is configured correctly.

Setup instructions

Many people are afraid to configure the TP-Link router themselves, especially in cases where the computer is connected to the Internet via a modem (fiber optic, cable or ADSL). However, there is nothing complicated in this procedure. The instructions described below are suitable for all modern router models (not older than five years) - the appearance of the menu may differ, but the settings items remain the same.

Manipulations are performed in the following sequence:

1. Connecting the router to the network and computer.
2. Setting up WAN and Wi-Fi.
3. Setting a wireless network password.
4. Change the password to protect your router settings.

Before you perform any connection actions, you need to check what network parameters you have set:

• PPPoE - users can connect to the Internet only after entering their login and password.
• Static IP - to connect, the user must manually enter the parameters (IP address, ) issued by the service provider.
• Dynamic IP - connection parameters are set automatically via DHCP.

If you have Dynamic I.P. installed (lately this is the most common option), when setting up the router there will be no problems with obtaining an IP - all the necessary parameters will be set automatically. For other connection options You will most likely need to contact your provider and check with them.

A separate situation is if the provider deliberately blocks new connections by MAC address. In this case, you need to try to clone the MAC address in the appropriate router settings item in order to assign it the same address as on the computer. You can also call your provider while connecting the router and ask him to change the MAC address. However, if your agreement with your service provider contains a clause stating that you agree to connect only one computer to each outlet and use only the provider's router, it is unlikely that you will be able to connect TP-Link.

Connecting a TP-Link router

Let's look at it step by step, how to connect a TP-Link router to a laptop or PC:

Please note: when connecting via a modem, the latter must be connected to the router using the WAN-WAN scheme, while the router is connected to the PC via a LAN connector. If at this stage you accidentally mix up the cables, the connection will not work - you will end up with a network without Internet access.

Setting up an Internet connection

Now let's figure out how to set up WiFi on Tp-Link. So, the first thing you need to do is enter the router settings. To do this, enter the numbers 192.168.1.1 or 192.168.0.1 into the address bar of any web browser. After this, a small pop-up window should appear asking for a username and password. In both fields you need to enter the word admin. By the way, the default username and password can be found on the sticker at the bottom of the router.

If the standard username and password do not work, you will need to reset your router to factory settings. To do this, press the Reset button located on the back with something sharp and hold for 10 seconds.

In rare cases, when you try to access your device settings, you may receive an error message from your provider (for example, a page notifying you that your account is out of money when in fact it is not). Don't panic - just try logging into settings through a different browser.

The connection is configured like this:

The same operations can be performed in the Quick Setup menu. If you're worried about accidentally clicking the wrong thing, use this feature.

If the process was successful, an available Wi-Fi network with the name you specified earlier will appear in the list of networks of your devices (phone, tablet, etc.). To connect to it, enter the password written in the PSK Password column (do not confuse it with the settings password).

Changing the Settings Password

Unlike the previous ones, these steps are not mandatory - the password can be left as standard. However, please note what's in the router settings, among other things, the password with which you protect your wireless network is visible. This means that strangers can use your network - to find out the password, they only need to enter the device settings.

To prevent this from happening, you must do the following:

If you are unable to complete the setup, go to the official TP-Link website, go to the FAQ section and look for a description of your problem in the list of frequently asked questions. By the way, on the official website you can download the latest drivers for various TP-Link router models.

In addition, it should be remembered that Internet problems may be caused by not only by your actions - perhaps some problems have arisen on the side of the provider or with the router itself. Try disconnecting the router from the computer and connecting to the Internet directly - if there is still no network, most likely the problem is on the ISP side. Wait until the network connection is restored and try to configure the router again. To clarify the problem, you can call the service provider back.

If, when connected to a PC, the router shows no signs of life (the indicators do not light up), and at the same time you are sure that you did everything correctly, the problem is in the device itself. In this case, only specialists from the service center will help.

Many readers ask me how to set up a TP-Link TL-WR841N WiFi router. If you have a different model, then I would like to note that these instructions for connecting the Internet and setting up WiFi are universal for any modification of TP-Link, and not just TL WR841n. In addition, on our website you can find more detailed guides for,. I’m sure they will definitely be useful to you, because even if the wizard initially installed everything for you, then later, if you need to change something, for example, the name of your network or the wifi password, you will have to configure the TP-Link WR841n yourself.

How to connect TP-Link TL WR841N to a computer?

Let's get straight to practice. First of all, you need to connect an Internet cable from your provider to the TP-Link WR841n router. If previously it was inserted directly into the network connector of the computer, now the Internet will go to the router, and through it via WiFi to other devices. Therefore, we remove the wire from the network card on the back of the PC and insert it into the WAN port on the router. TP-Link TL-WR841N has one and is highlighted in blue from others for ease of perception

Next, we take the Ethernet cable that comes with it from the box (it is also called a twisted pair or patch cord) and connect one end of it to any of the yellow LAN connectors, and the other to the computer’s network card, where the cable from the provider was previously installed.

Setting up the Internet on TP-Link WR841n

To set up the TP-Link TL-WR841N, you can use the CD included in the kit - it has a convenient step-by-step installer that will be just right for a beginner. However, since we decided to do this without a disk ourselves, we turn the router over and on its bottom we find information for entering the settings of the TP-Link router. In this case, we need to type the address “http://tplinkwifi.net” in the browser and enter the login/password admin/admin. You can also log into the WR841N admin panel using its standard IP address “192.168.0.1” or “192.168.1.1”, depending on the model. I talked about all possible connection problems - read it if you can’t open the login address.

Next, I will provide two screenshots with examples of settings for different TP-Link routers - for the old and new firmware. The fact is that the admin panel was recently updated and it may be difficult for a newbie to navigate the installation based on old pictures. At the same time, the old version of the web interface is also very common, so it is impossible not to show it.

Select the “WAN” item in the “Network” menu section and make the basic parameters for connecting the TP-Link router to the Internet. To do this, you will need to set the connection type, login, and password. Perhaps data about the IP address, mask and gateway - all this should be specified in the contract for the provision of Internet services from your provider, or you can simply call their technical support and find out this data for configuration. As an example, I will give the most popular ones.

How to configure a TP-Link WR841N router for Rostelecom and Dom.Ru - PPPoE

If your service provider is Rostelecom or Dom.Ru, then when setting up you need to select the PPPoE type. It requires you to enter your username and password.

TP-Link router configurations for Beeline - L2TP

For Beeline you need to install L2TP and, in addition to the login and password, specify the host name for the connection - tp.internet.beeline.ru

Dynamic and Static IP

Two more types of connection to the provider. With a dynamic address, you don’t need to enter anything at all - just select this item and proceed to setting up wifi. If you have been given a static IP to access the Internet, then the information that is specified in the contract will be useful here - ip, mask, gateway, but more on that a little later.

And in the next paragraph “Clone MAC address” you can use the computer address - in the networks of some providers it is still required to use one MAC address, which was registered when concluding a contract for the provision of services. As a result, if you start the router, the Internet simply will not work - this section is precisely for this case.

Setting up a WiFi network on the TP-LINK TL-WR841N router

The next step in setting up your router is to configure your future wireless network. On the TP-Link WR841N they are made in the “Wireless Mode” menu group. Here you can set the channel to operate, its width and mode, and also assign a network name. Set the network mode to “b,g,n” - it will allow you to distribute the Internet to the widest possible range of devices via your WiFi. The rest can be left as default for the first time.

What should I do if I can’t enter TP-Link settings?

Sometimes it happens that you cannot enter the TP-Link settings. There may be two reasons:

1. If the standard IP address for logging into the TP-Link router has been changed, which looks like 192.168.0.1, or the login and password. To do this, you just need to press the “Reset” button on the router plugged in for 10-15 seconds.
2. If you entered incorrect parameters for connecting to the network on your computer. To do this, go to the computer’s cable connection settings in “Network Center > Change adapter settings”

Depending on the modification of the operating system, the path that needs to be taken to get to them will be different.

Windows 7

Windows 10

1. On Windows 10, to get to this settings section, you need to right-click on the “Start” icon and go to “Network Connections”

   

Currently, unlimited high-speed Internet is no longer a novelty. And even more so if we are talking about a wireless connection option, which is applicable even for a personal computer, not to mention laptops, tablets or smartphones. Nowadays, most mobile devices have a built-in WiFi module, and their comfortable use directly depends on how high-quality the wireless connection is installed in your home and how well you can connect everything to your computer.

TP-Link WiFi routers are a good example of solving problems with speed, range and antenna power. You are also guaranteed to get rid of wires in your apartment. After you have purchased a router, it is very important to understand how to properly connect the device to your computer yourself. The fact is that if you already have the Internet, then the lack of knowledge on this issue can lead to additional costs for calling specialists.

In this article we will try to tell you how to properly connect your TP-Link to a computer and configure it subsequently.

Connecting to a computer

The first thing you need to do is open the box and make sure that the configuration of the TP-Link router matches what was described in the documentation. That is, make sure that all the elements are in place. In addition to the router itself, you must have a power supply, cables, and a disk with software.

Before you connect your TP-Link router to your computer, you need to place it correctly. It's best to place the cable close to where your PC is, as the included cable isn't very long. If this fails, you can purchase a longer cable additionally. It is very cheap and can be found in any electronics store.

The TP-Link router has the following buttons and connectors, most of which we will need when connecting and setting up:

• power button;
• WAN connector for connecting the router to the Internet;
• LAN connectors for connecting a PC using a network cable;
• disabling and enabling the QSS function;
• button to reset the router settings.

After you have become familiar with the location of the connectors, you need to connect the power supply to the TP-Link router and plug the unit into a power outlet. A cable that was laid by the provider is connected to the WAN socket located on the device body, that is, connecting directly to the Internet. The TP-Link configuration assumes the presence of at least four LAN ports, so you can connect four personal computers at once if you use a network cable.

Setting up a TP-Link router

Before you start setting up, experts recommend performing a preliminary reset to factory settings. After the router has rebooted, use any browser. In the address bar, enter 192.168.0.1. Another option is 192.168.1.1, depending on the firmware version. You will automatically gain access to the Setup Wizard.

To get inside, enter your password and login. By default, both lines are admin. For further network security, it is better to change the password during the preliminary setup that is being discussed at the moment. To change the input data, go to the System Tools tab, where you need to click on Password. In the Old User Name and Old Password fields you will need to enter the factory login and password, that is, admin. Create a username and password. In principle, you can leave the old login. Enter new data in the New User Name, New Password, Confirm New Password fields. The last field is confirmation of the new password. Don't forget to save your updates by clicking Save.

On the setup page, you can optionally download and install the latest firmware immediately. The installation itself is carried out through the System Tools menu, where you need to go to the Firmware Upgrade field. In it you should click on Browse, select the downloaded file and click on Upgrade. Downloading must be done only from official TP-Link resources. Fully licensed firmware is provided absolutely free.

Setting up the Internet in a TP-Link router occurs in the Network and WAN menu. The first thing you need to do is select your network type. If it is unknown to you, then simply clarify it by calling the provider’s “Hotline”. After you have chosen the type, you will need to save the settings, for which you need to click on Save.

After successful saving, go to the next tab labeled MAC Clone. There is a Clone MAC Address button, which you need to click on, and then save everything using Save.

How to set up a WiFi network on a tp link router

To set up a wireless connection, you need to go to the Wireless tab. There is a field here labeled Wireless Network Name. The name of your network is entered into it, and it can be chosen arbitrarily. If desired, you can enter the name of the country in the field below. Don't forget to save all changes.

On the Wireless Security tab, you configure the security system configuration, including protection against unauthorized access. To do this, you need to come up with a not too simple password and enter it in the PSK Password column.

All changes to the settings must be saved, after which the router must be rebooted. You need to reboot the device from the Reboot button located on the System Tools tab. After clicking the button, you just need to confirm your action.

Conclusion

As you can see, there is nothing difficult about connecting and configuring the router yourself. It's really simple and doesn't take much time. And you can save money on calling specialists and the time during which you would have to wait for them.

The web interface of TP Link routers of various models is similar; the instructions are based on a universal one.

Connecting a router Remove the router from the box and install it in a place convenient for you. Connect the power adapter from the kit into the appropriate connector on the back panel of the router and into a 220V outlet. Connect the main network cable (the one that was brought into your apartment when you connected to the K-Telecom network) into the “INTERNET” or “WAN” port, and connect one end of the network cable from the kit into one of the numbered LAN ports on the back panel of the router, and the other - into the computer's network card. You will not need the installation disk that came with the router.

Important: Do not connect the main network cable to the numbered LAN ports! This will disrupt the communication service throughout the entire house.

Setting up the router

Open a separate tab in your browser, enter the address 192.168.0.1 in the address bar and press Enter on your keyboard. Having gone to this address, we see a window for entering your login and password for authorization when logging into the router’s web interface. In the “User Name” field enter “admin”. In the line “Password” - also “admin” in Latin (English) small (capital) letters without quotes. Then press “Log In” on the screen, or press the Enter key on the keyboard.

After entering the characters correctly, a window with the router settings will appear in front of you, shown in Figure 2.

In order to set up an Internet connection on the router, you need to select “Network”, then “WAN”. In the window that appears, select in the “WAN connection type” field – “L2TP/Russia L2TP” (Figure 3).

All remaining fields in this window are filled in according to the data presented in Figure 4.

Setting up WI-FI In order to set up a wireless connection, you must select the “Wireless Mode” item, sub-item – “Wireless Mode Settings”. The “Network name” field is the name of your wireless network (here you can enter any name convenient for you, the main thing is that it contains only Latin characters and/or numbers). After entering, click on the “Save” button (Figure 6).

To secure your wireless network from outside connections, you need to configure security settings. Initially, select “Wireless Mode”, then “Wireless Protection”, in the window that appears, put a dot on the item “WPA-Personal/WPA2-Personal (Recommended)”. “PSK Password” is the password for your wireless network (here you can enter any value convenient for you, the main thing is that it contains only Latin characters and/or numbers and there are more than 8 of them). To save the entered settings, click on the “Save” button (Figure 7).

Setting up IP-TV. To configure IP-TV, you need to return to the “Network” item, select “IP-TV” there and select “Enable” in the “IGMP Proxy” field, then click on the “Save” button. If you are using an IP TV set-top box, it is recommended to turn it on to LAN port No. 4 on the router, then select “Bridge” in the “Mode” field and select “LAN 4” in the “Port for IPTV” field (Figure 8).

This completes the configuration of the router, but in order to successfully save all parameters and ensure correct operation of the device, you must reboot it. To do this, select the “System Tools” item, the sub-item – “Reboot”, then you need to click on the “Reboot” button (Figure 9).

After this, a window will appear in front of you in which you need to click on the “Ok” button (Figure 10).

The TP-Link TL-WR841N router is one of the most popular router models, which has proven itself to be the best and, as a result, is in consistently high demand among many users. In this article, we will look in detail at the procedure for connecting and setting up a router, including going into detail about configuring a wireless Wi-Fi network.

Brief specifications of TP-Link TL-WR841N

How to connect a router

The router package includes:

• Router TL-WR841N;
• Power adapter;
• Ethernet cable with RJ-45 connectors;
• CD for quick setup;
• Management.

We unpack the box and proceed to installing and connecting the router. First, connect the device to power using the adapter and press the Power button on the rear panel (if the indicators on the router light up on their own after power is applied, then you do not need to press the button).

Next, use the included Ethernet cable to connect the router and computer. We plug one end of the cable into one of the four yellow LAN ports of the router, and the other into the connector of the PC’s network card. Then we connect the cable coming from the Internet provider or ADSL modem to the blue WAN connector of the router.

In principle, that’s it, now you can proceed directly to setting up the router, but first let’s make a reservation that it comes with a CD with a utility that allows you to quickly configure the router in a step-by-step mode. We will not consider this method, because the configuration option via the web interface is more preferable.

Basic setup of the TP-Link TL-WR841N router

Since the router will now be responsible for connecting to the Internet and distributing it, there is no need for the high-speed connection created earlier in Windows. At the same time, the connection via the local network connecting your computer and router needs to be configured. Let's go to Control Panel - Network and Sharing Center - Change adapter settings. Right-click on the active connection and select “Properties”.

On the “Network” tab, set the switches to “Obtain an IP address automatically” and “Obtain a DNS server address automatically.”

We also set the switch on the “Alternative configuration” tab to the automatic configuration position. Save the changes with the “OK” button.

Now launch any browser and enter in the address bar http://tplinklogin.net/ or 192.168.0.1 . Then in the window that opens, enter the username and password - by default this is admin And admin.

The standard username and password are indicated on the label on the bottom of the router. Look at it and make sure once again that all login information for the TP-Link TL-WR841N configuration web interface has been entered correctly.

If everything is done correctly, you will be taken to the administration panel. Here we immediately go to the Internet settings.

Internet setup (WAN)

Select “Network” in the menu on the left (in the English interface – Network), and then the WAN section. In the “WAN Connection Type” drop-down list, select the desired type of connection to the provider.

The following options exist:

• Dynamic IP address;
• Static IP address;
• PPPoE;
• L2TP;
• PPTP.

There is no point in delving into the essence of all these types of connections. Information on which one to choose is provided by the provider. The Internet service provider also transfers authorization data to the client - username and password. If you suddenly forgot this data, you can look it up in the contract. The second option is to call the provider's support service.

So, we configure the WAN connection according to the following schemes:

• When choosing dynamic IP address no additional actions are required;
• Option Static IP address requires entering the IP address, subnet mask, gateway and DNS. We remind you that all this data is provided by the service provider, i.e. your provider.
• Connection type PPPoE requires entering a username and password.
• When selecting a connection L2TP indicate the username, password and IP address/VPN server name.
• Connection type PPTP will also require you to enter your username, password and IP address/VPN server name.

After all the data has been entered, click the “Save” button. The Internet should work.

After setting up the Wi-Fi router TP-Link TL-WR841N there is no Internet access

If you have configured everything exactly according to the instructions, but as a result the Internet does not work, you need to do the following:

If none of the above steps help, the router may be faulty. To make sure the device is working, try connecting it to your friends or acquaintances.

Wi-Fi setup

Providing a wireless connection to the Internet is one of the most important functions of a router. Let's move on to the Wi-Fi settings for TP-Link TL-WR841N.

Go to the section Wireless Mode - Wireless Settings (Wireless – Wireless Settings). Set the name of our Wi-Fi network and select the region.

Below are network settings that may affect signal quality and coverage in certain situations. We will not focus on them, since this is a topic for a separate large conversation. Leave all settings at their default values ​​and save your settings.

Now we need to protect our wireless network from unauthorized connections of third-party users. Select “Wireless Security” on the left.

Set the switch to the “WPA/WPA2 - Personal (recommended)” position. Next, select the version, encryption type and set a password. We save the changes made.

Setting a new administrator password

The standard username and password for accessing administrative settings make your TP-Link TL-WR841N router very vulnerable, so it is better to change them immediately. Let's move along the path System Tools - Password (System Tools - Password). Here we enter the old and new data for authorization (you can only change the password, but leave the user name as admin), and then click “Save”.

You can write down your password somewhere so you don’t forget it.

Perhaps this completes the basic setup of the TP-Link TL-WR841N Wi-Fi router. Of course, there are still a lot of different functions that can be useful to users. However, this will be a more subtle configuration that requires a separate article. We achieved the main goal - we set up the Internet and Wi-Fi.

For all settings to take effect, reboot the router. This can be done programmatically through the section ( System Tools - Reboot) or physically by turning off the power. After loading, a Wi-Fi network with the specified name should appear, to connect to which you will need to enter a password. The Internet must work in both wired and wireless mode.