Installing windows 10 via BIOS. How to configure the BIOS to boot from a disk or flash drive. Determining the boot order
In some situations, users may need information on how to install Windows from a flash drive via BIOS. Today, the question is relevant due to several reasons, including the need for an emergency reinstallation of the Windows software package. It may happen that the distribution package will be written to the most ordinary USB drive, and not to a disk, because the use of such a source of information storage is convenient. It is worth noting that many modern laptops simply do not have a DVD drive, which has allowed manufacturers to create ultra-thin devices. In this case, reinstalling the version of Windows XP, 7, 8.1, 10 required for operation is possible only from a flash drive or external hard drive connected via USB. Anyone who has installed a software package knows that this process is not complicated, but it requires the user to have certain knowledge and skills, without which it will not be possible to start the process. Installation of the current version of Windows XP, 7, 8.1, 10 begins with entering the BIOS, the parameters of which you need to be able to understand. It should be noted that through BIOS from a flash drive you can not only install a software package, but also carry out a deep scan of the system for the presence of malware, which in some cases allows you to establish the correct operation of Windows XP, 7, 8.1, 10 on a user’s computer or laptop.
When you can't use a DVD drive, a flash drive comes to the rescue
Preparing for installation
If you purchased a laptop with a pre-installed licensed software package Windows 7, 8.1 or 10, then you should remember that it is called a factory distribution. We recommend that you prepare in advance for a situation where you will need to reinstall the operating system and useful programs from the manufacturer. In this case, the distribution is written to a DVD-R disc, flash drive, or external hard drive. In the last two cases, it will be necessary to configure certain parameters in the BIOS.
Installing an unfamiliar version of Windows XP, 7, 8.1 or 10 is very similar to installing a factory distribution. The main task of the user is to start the process, and then the system automatically installs the software package on a computer or laptop. We recommend that you carefully select installation files, since on the Internet you can find a huge number of pirated versions of software packages that do not work correctly after installation.
There are sequential instructions that describe the process of recording an operating system image onto a flash drive, which will be used to install Windows on a computer or laptop. The successful result will depend on the quality of the image and the correct execution of the algorithm.
So, reinstalling the operating system from a USB drive includes the following steps:
- Write installation files to a USB drive.
- Transferring all files needed in the future from drive C to protect them from deletion.
- Installing a flash drive into a USB connector.
- Launch BIOS and change settings in the menu. You need to search for information on how to enter the BIOS on a specific computer or laptop.
- Starting the installation of the operating system.
Before starting the BIOS, all users should understand that the flash drive must already be connected to a working USB connector of the laptop or computer. It is worth noting that the BIOS can be launched using a combination of different keys, for example, repeatedly pressing Del, Esc, F12, F10. This action is always carried out at the moment the device boots. The input method depends on the BIOS manufacturer and the computer model. Users should be prepared for the fact that the mouse will not work in this mode. All control in the BIOS is performed by pressing keys. However, no one has any difficulties with this. The main task after entering such a menu is to launch automatic installation from a flash drive. Once Windows installation starts, no user intervention is required.
![](https://i0.wp.com/htfi.ru/img/ne_zapuskaetsya_ustanovka_windows_10_s_fleshki_cherez_bios_3.jpg)
Key combinations vary by BIOS manufacturer
Changing BIOS settings and starting installation
Immediately after entering the BIOS, you need to find a tab called Boot. Often the required section is called in one word. Different BIOS versions have different interfaces, but the Boot tab is usually present in all firmwares. After entering the tab, you should select the Hard Disk Drives item, where the order of device recognition will be presented.
Users should understand that to start automatically loading the operating system, the flash drive must be listed in the first place in the BIOS. Opposite the “1 st Boot Device” parameter, a device should be installed that has the word “usb” in its name. Rearranging devices is done using the Enter and Up, Down, Left, Right keys.
After all the changes have been installed, you need to save them. To do this, use the F10 button. The BIOS has many tips that help a newbie navigate. Then all that remains is to restart your computer or laptop, after which the process will begin automatically.
Installing Windows 7, 8.1 or 10 from a flash drive via BIOS will solve the problem of troubleshooting if the device does not have a DVD drive. In addition, flash drives are a reliable source of storing information. Usually, when installing a software package from a flash drive, no failures or difficulties arise.
nastroyvse.ru
Installing Windows 10 from a USB flash drive via BIOS
Before we start figuring out how to install Windows 10 from a flash drive via BIOS, let me make a few comments: If you have already bought a computer with Windows 10 pre-installed, then with a clear conscience you can skip this material. You will not find anything interesting in this article if you already have the system installed.
If you already have Windows 7, you can upgrade to Windows 10 using the standard system update mechanism - just turn on the Windows 10 Update service.
Installing Windows 10 via a USB flash drive may only be necessary if you bought a new computer without an operating system and purchased a Windows 10 installation disk separately. Installing “ten” is almost the same as “seven”, but, as always, there is one moment.
As a rule, licensed Windows 10 comes on a DVD. But some modern computers no longer have a DVD drive. Examples of such computers are compact PCs designed for media centers, ultrabooks and netbooks. These are all compact devices, and there is simply no room in their case for a bulky DVD drive. What to do? You need to somehow put Windows 10 on a flash drive, boot from it and install Windows 10 from the flash drive.
Creating a bootable USB flash drive
Creating a bootable USB flash drive can be done in different ways (for more details, How to create a bootable USB flash drive for Windows 10). The first of them is to use a standard tool from Microsoft - Windows 10 Installation Media Creation Tool, which can be downloaded at: https://www.microsoft.com/ru-ru/software-download/windows10.
Using this tool is quite simple. Launch it, select which edition of Windows 10 you will install. The tool also allows you to select the bit depth of Windows to be installed. If your computer has less than 4 GB of RAM, then you don’t need to bother it with a 64-bit build.
When the program asks where to put the Windows distribution, select the USB flash drive. At the end of the program, you will have a ready-made bootable media (namely, a flash drive).
Installing Windows 10 via USB flash drive in BIOS
In order to install Windows 10 from a flash drive via BIOS, enter the BIOS SETUP of your computer and select boot from the flash drive (depending on the type of media from which you will install Windows 10). On desktop computers, the DEL key is usually used to enter BIOS SETUP. Laptops may have different keys and even key combinations. The F2 key is used quite often. Some BIOSes display a prompt similar to this:
Press to enter SETUP
Everything is clear here. You need to press the F2 key and you will be taken to SETUP. Some display a graphical splash screen without any prompts. These are more difficult, since you need to refer to the documentation to find out how to enter the BIOS SETUP. See article: How to put boot from a flash drive in the BIOS
After loading from you will be taken to the language selection menu. As a rule, the Russian language will be immediately selected, and you just need to click Next. If you've ever installed previous versions of Windows (versions 7 and 8), then this window will seem painfully familiar to you.
After that, you will see a window with a single Install button. To be honest, I always wondered why it was needed and why not go straight to the window with the license conditions?
After you accept the license terms, you will have to select an installation type. Since we are installing the system on a new computer, we need to select Custom: Windows installation only.
Immediately after this, you need to select the drive on which you are installing Windows 10. Why didn’t we discuss system requirements before? Yes, because “ten” can be installed on any modern or not so modern computer. If you're interested, you can install Windows 10 in a virtual machine with a single-core processor and one gigabyte of RAM. Why virtual? Yes, because it is very difficult to find a real machine with 1 GB of RAM in 2016, and I wanted to check the minimum system requirements stated by Microsoft. The system worked fine. Of course, to the best of your ability. But I think you will be fine with the hardware.
The only thing that the “ten” (as well as the “eight”) is demanding is free disk space. The minimum (as Microsoft claims) is 20 GB for the 64-bit version and 16 GB for the 32-bit version. But Microsoft is lying a little. The 64-bit assembly literally grew to 25 GB within a matter of hours after installation. But with the 32-bit one, everything is much nicer - it took up 6 GB immediately after installation and update. Only 6 GB. It is clear that it will grow during the process, but I think the declared 16 GB corresponds to reality.
The system installation process will begin, after which it will reboot. Depending on the performance of the hard drive, this process can take from several minutes to several tens of minutes. On SSD drives, installation takes place in minutes.
After reboot
After the reboot (which will be completely automatic), you will have to contemplate for some time a black screen with the Windows 10 logo and the words Preparing in progress. After this, the installer will prompt you to set some parameters. All the parameters that he will offer to set by clicking the Settings button can be changed after installation, so I suggest not wasting time on setting them and clicking the Use standard settings button.
Next, Windows 10 will try to get critical updates from the Microsoft website, but this is only if the computer is immediately connected to the Internet, for example, using a local network connection (to an ISP or to a router); all other types of connections require preliminary configuration.
Who owns the computer?
Who owns your computer - you personally or your organization? Select the appropriate option when Windows asks you to do so. If you accidentally select that the computer belongs to the organization, but in fact it is not (there is no Active Directory deployed on the network), then you will see a message that you cannot log on. No problem, just click the Skip button.
Create a user account
The next installation step is creating a user account. Windows 10, unlike Windows 8, does not prompt you to create a Microsoft account during installation. This is understandable: there is not always a connection to the Internet at the system installation stage, and users are more willing to use regular local accounts. Later, if you want to use certain system features, you will be asked to create a Microsoft account.
So, enter your username and provide your password. You can not specify a password - in this case, you will be able to log in without a password. However, the presence of even the simplest password significantly increases security when encrypting data using standard system means. Therefore, if you plan to work with data on your computer that you want to encrypt using EFS, be sure to set a password.
There's very little left
After creating a user, the system will ask you to wait a little while it configures the applications. After setting up the applications, the system will ask you to choose whether you want to allow other computers and devices on the same network to discover your PC. If there are other computers on your network, select Yes; if there are no other computers and you do not plan to work on the local network, then select No.
Actually, that's all. You will see a desktop with the new version of Windows. Don't switch: the next article will look at the new features of the Tens.
Video - Installing Windows 10 from a USB flash drive
Updated: 06/19/2017 12:35
mysitem.ru
How to install Windows 10 from a flash drive via BIOS? – Instructions
In order to understand how to install Windows 10 from a flash drive, you need to understand one important point: the installation process consists of three stages, namely, creating bootable media, setting up the BIOS and using the drive for its intended purpose.
We will analyze all these three stages step by step and in great detail, so that no one has any questions and everyone can install Windows 10 on a laptop or PC with complete peace of mind. Let's go!
Step #1. Creating a bootable USB flash drive
Not only a removable storage device, that is, a flash drive, but also a regular DVD or even a CD can also be used as such a medium. But this type of information storage has long become a relic of the past and it is much more convenient to take a USB drive.
The easiest way to create a bootable drive is using the official utility from Microsoft, which can be downloaded from the official website. It's called Media Creation Tool, although that's not that important. When you do this, launch it and follow these simple steps:
- After launching, you will have to wait a little while the program prepares for further actions. When it completes, you will see the license agreement. You can read it if you wish, but in any case you need to click on the “Accept” button.
Rice. No. 1. Media Creation Tool License Agreement
- In the next step, check the box next to “Create installation media for another computer” and click “Next”.
Rice. No. 2. Options in the Media Creation Tool
- Next, check the box “USB flash memory device” and click “Next” again.
Rice. No. 3. Options for creating an image in the Media Creation Tool
- If you want to create an image of exactly the same operating system that is already used on your computer, in the next window you do not need to change anything, just click “Next”. If you want to write a different version of the OS to the flash drive, uncheck the “Use recommended settings for this computer” option and change the “Release” and “Architecture” parameters. After that, again, click “Next”.
Rice. No. 4. Media Creation Tool language, architecture and release selection window
- Next, all you have to do is check all the previously entered parameters and click on the “Record” button. Wait until the program finishes its work. Usually this process does not take very long.
It is worth saying that this utility freezes very rarely, so if it seems to you that everything has stopped and nothing is happening, it is better not to interrupt the recording process. Instead, just wait a little longer.
Of course, if all this has been going on for several hours, then something is wrong, but this is highly unlikely. In any case, you will receive a fully functional bootable drive with Windows 10 installation files.
You can also create it using the very famous and simple UltraISO program. How to do this is described in our article on updating the OS on a laptop.
Now you need to make sure that the computer boots from it. This is done through the BIOS.
Step #2. BIOS setup
Before the installation itself begins, it is important to configure the computer to boot from a flash drive. This procedure will look different depending on the BIOS/UEFI version.
To initially get into the BIOS, you need to press a certain key during boot, most often Delete or F2. Usually on the loading screen, among other inscriptions, it is also written which button should be pressed.
How this might look is shown in Figure 5.
Rice. No. 5. Specifying a button to load the BIOS on the boot screen
- AMI BIOS. In this case, you need to use the “Up”, “Down”, “Right”, “Left” and “Enter” keys to go to the “Boot” tab at the top. Next, go to the “Hard Disk Drives” section and click on “1st Drive”. There, put the flash drive in first place - you can recognize it by its name. Do the same in the “Boot device priority” section, only there the desired item will be called “1st boot device”. Press "Esc" to exit and restart your computer if it doesn't do so automatically.
Rice. No. 6. Installing the flash drive in the first place to boot into AMI BIOS
- AWARD or Phoenix BIOS. Go to the “Advanced BIOS Features” section and find the “First Boot Device” item there. Press “Enter” on it and in the window that appears, select the option “USB-HDD” or “USB-Flash”. Press "Esc" to exit.
Rice. No. 7. Installing the flash drive in the first place to boot into AWARD or Phoenix BIOS
- h3O BIOS. Everything here is almost the same as in the AMI BIOS. First you need to go to the “Boot” tab, but then you should click on the “External Device Boot” item and select the “Enabled” option. Then in the “Boot Priority” section you should put “External Device” in first place. This is done using the “F5” and “F6” buttons. Again, exit this menu using the "Esc" button.
Rice. No. 8. Installing the flash drive in the first place to boot into h3O BIOS
If you are already using UEFI rather than BIOS, then everything is much simpler.
In this case, the procedure is to go to the “Boot Sequense” or “BIOS Features” section and then “Boot Options”. After this, you can simply drag the flash drive with your mouse cursor to the first boot location. It also happens that the required menu item is called “Download Queue” or something like that.
Rice. No. 9. Options for installing removable media in the first place to boot into UEFI
Although users of Windows 8 and younger with UEFI do not even need to go to the system menu. Here it is enough to do the following:
- use the search to find the “Update and Recovery” window;
- go to the “Recovery” tab on the left;
- click on the “Restart now” button;
Rice. No. 10. Update and Recovery menu and Restart Now button
- then click on the “Use device” button;
- select your flash drive in the list that appears.
Rice. No. 11. Selecting an action and list of devices available for downloading
As you can see, everything is extremely simple. If something doesn't work for you, it's best to refer to your computer's instructions or Microsoft Help page. But we have listed most of the currently available options above.
Step #3. Direct installation
Actually, now you need to use the created bootable drive to install Windows 10. If you did it in the same way as described in step No. 1, then the installation process will look like this:
- After the computer boots, a window will appear in which you need to select the language you will use, the time format and the input method, that is, the keyboard layout. If you previously used the Russian language, all these parameters will be set to Russia by default. All this can be changed by simply clicking on the appropriate item. Once the parameters are specified, click Next.
Rice. No. 12. Window for selecting language, time format and layout during installation
- On the next screen, simply click the “Install” button. She is the only one there and it is impossible to confuse her with something else.
- Next, a window will appear to enter the product license key. If you have it, enter it and click “Next”. If not, click on the words “I don’t have a product key.” You will still be redirected to the next Windows installation screen.
Important! If you created an image of your system, enter the key for it. This is also true for cases when you install the OS on another computer.
Rice. No. 13. License key entry window
- If you entered the key, the operating system version will be detected automatically. And if you clicked on an option where you do not have a product key, you will have to select it yourself. It is advisable, of course, to choose the same version that is already used on the computer, but you can click on another one. Finally, click “Next”.
Rice. No. 14. Selecting the operating system version to install
- Next you will have to agree to the license agreement. If you wish, you can even read it, although very few people around the world do this. In any case, check the box next to “I accept the license terms” at the bottom and click “Next”.
Rice. No. 15. Windows license
- If you just want to update an existing system and save all files and settings, in the next window click on the first option, that is, “Update: install Windows while saving...”. But if you want to remove everything and install a completely clean OS on your computer without files and settings (which, by the way, may have caused any breakdowns on your computer), choose the second option - “Custom: Windows installation only...”. If you wish, by the way, you can read in more detail about these options. To do this, click on the inscription “Help in making a decision” a little lower.
Rice. No. 16. System installation options
- One of the operations that is performed during a custom installation is partitioning the hard drive. You can read how this procedure works and what its principles are in our article on disk partitioning (method No. 3). Perform all operations required for custom installation and click “Next”.
- Then you can simply watch the installation progress step by step. Typically, the necessary files are copied first, then they are prepared for installation, and finally components and updates are installed. Here you just have to wait.
Rice. No. 17. Installation process step by step
- Actually, this completes the installation. But you will still need to perform the initial system setup. As part of this stage, you will again select your location, keyboard layout, create an account with Microsoft, or simply log in if you already have one. You can also optionally set a login code, connect cloud storage and configure privacy.
Tip: After installation, check all drivers. The easiest way to do this is to use the DriverPack Solution program. It allows you not only to check, but also to update drivers if necessary.
This completes the entire installation process and you can freely use Windows 10.
best-mobile.com.ua
The process of installing Windows 10 from a flash drive: main points
Not long ago, the latest Windows 10 operating system was presented. Installation on a computer or laptop that has a DVD drive does not raise any questions. With netbooks the matter is more complicated. Let's look at the options for installing Windows 10 from a flash drive on such devices. Here you need to understand that there are simply no other ways.
The simplest method of installing Windows 10 from a flash drive on top of an existing system
Actually, you don’t need to go far to install a new OS. It installs without any problems or additional steps, as was the case with Windows 7 and 8, from a regular USB drive.
The simplest version uses a program to install Windows 10 from a flash drive called Media Creation Tool. In this case, the new operating system is installed on top of the old one (updating to a more recent version). It is enough just to launch the program to begin the process of downloading the distribution kit with subsequent installation, where the Upgrade item is selected in the installation parameters, which allows you to save absolutely all previously specified system settings.
How to install Windows 10 from a flash drive by removing the old system
It's another matter when the old OS needs to be removed completely. If anyone doesn’t know, this is achieved by formatting the partition into which the installation will be performed. Only here you need to keep in mind that initially the “ten” assumes the possibility of a rollback (return to the old OS to the state before the installation of Windows 10).
As is already clear, after formatting the hard drive or hard drive partition, this possibility will be completely eliminated. So first think about which option is preferable.
Creating an image
Now let's look at the method of installing Windows 10 from a flash drive with the condition of completely removing the existing OS. It goes without saying that you need to download the installation distribution or disk image. If the distribution is not downloaded as an image, you will have to create it.
To do this, you can use any utilities that can work with disk images. Then you need to write it to a USB drive. For example, in the UltraISO program, the desired file is first opened, after which the boot menu is used, where the command to write a hard disk image is selected (in this case, our flash drive is selected in the window that appears). A warning will appear indicating that all data on the media will be deleted. We agree and begin the recording process.
Please note: if USB-HDD recording mode is not enabled by default, it is highly recommended to enable it.
BIOS Settings
The problem of how to install Windows 10 from a flash drive is not limited to just creating a bootable USB drive. In order for the computer system to respond to such a boot device, it must be set first in the boot priority in the BIOS settings.
The BIOS is accessed using the Del, F2, F12, etc. keys (it all depends on the brand of device and BIOS manufacturer). Here you need to find settings like Boot Device Priority and specify a flash drive as the main boot device. Such actions can only be performed if the flash drive was inserted into the appropriate port before turning on the computer, laptop or netbook. Otherwise, the device will not be detected, and it simply will not be in the list of available devices.
Installation process and initial setup
So, the boot from the USB drive has occurred and the installation process has begun. In the first step, you will need to specify the language used, the time and currency format, as well as the keyboard layout or input method. Next, we agree to the license, after which in the new window we select not Upgrade, but Custom and activate the installation process.
All you have to do is wait 10-15 minutes (again, depending on the device model), and after installation is complete, reboot the system (if it does not happen automatically), go into the BIOS settings again and set the hard drive as the first device to boot priority.
Now let's look at the initial loading of the operating system. Here you need to select the settings item (Settings), and then go either to quick settings (Express Settings), if you do not need to change the default settings, or use their modification (Customize), if you need to customize the basic configuration for yourself. As practice shows, it is better not to change anything.
However, you can play with the settings and rebuild them in terms of driver updates, ensuring privacy on the Internet, allowing or prohibiting the system from tracking your current location or personal data in some other applications, immediately creating a Microsoft account and a backup method for restoring it, for example via email or mobile phone, check the created account, present the possibility of saving photos or other documents in the Microsoft One Drive cloud storage, etc. However, all this is done solely at the request of the user.
Once all settings have been completed, the installation can be considered complete. The system is ready for use.
Conclusion
Finally, it remains to add that the process of installing Windows 10 from a flash drive is not that complicated. It looks much simpler than the installation of the same “seven”. Sometimes, however, an error may occur when installing Windows 10 from a flash drive. This is most often due to incorrect BIOS settings, damage to the USB drive itself, lack of free space on the hard drive, or incorrect entries in the system registry. As practice shows, the error can appear mainly when updating an existing OS to version 10. In most cases, when installing, so to speak, “from scratch,” this happens extremely rarely.
fb.ru
How to clean install Windows 10 from a flash drive via BIOS using the example of a budget laptop
Friends, hello everyone! In this article I want to show you how, in practice, a clean installation of Windows 10 from a flash drive via BIOS is carried out. This whole thing will happen on a live example of a budget Lenovo laptop. After all, if you remember, in the last article a special boot drive was already prepared.
Therefore, now the entire process will be shown from start to finish, so that even novice users will not have any questions. And we must immediately say that there is nothing abstruse in this matter, you just need to do it with your own hands once and all fears will go away on their own.
And also, at the very beginning I want to apologize for the poor quality of some of the photographs, because the whole operation took place late at night and the standard flash of the camera did not cope with the task assigned to it. Now, let's get started.
The first step is to go to the BIOS to install the initial boot from a pre-prepared flash drive. I explained in great detail how to do this in this publication. In our case, the correct parameters look like this:
Before exiting, do not forget to press the key combination to save the changes. The next step is to indicate your regional preferences. In general, no comments, just look at the picture below.
In the next window, “Windows Activation” awaits us. Therefore, if you have a license key, you can enter it. If it is not there or some pirated activator will be used in the future, click the “I don’t have a product key” option.
Now you will need to specify the version and bitness of the operating system to be installed. Personally, I recommend the most complete one, that is, select the “Windows 10 Pro” item.
After this, you should accept several license agreements of the following type.
And here comes one of the key moments. Now you need to select the installation type. Since we want to carry out a clean installation, we therefore select the second item, which is called “Custom: Windows installation only.”
It is important to understand that in this case all information from the system drive C will be deleted, since in the future we will be fully formatted. But only after this can you be sure that the system is on a truly pristine partition.
After this comes the second key episode. Here you should specify the logical partition of the disk on which the installation will be performed. Of course, logically, this will be the above-mentioned section C, but how to correctly define it in the installation program?
If you look at the screenshot above, it becomes clear that we have a computer hard drive that has never been used before, since it is not even properly marked. Therefore, using the “Delete - Create - Format” buttons we bring it to the desired form. Like this.
Please note that “Disk 0 Partition 4” will be the system drive C in our case, but “Disk 0 Partition 5” will be the logical drive, which is needed for storing music, videos and other nonsense.
Therefore, if your hard drive has already been used before, then there may be several such additional partitions. Therefore, do not even think about formatting them, otherwise you will lose all the data.
Let's once again reinforce this truism: it is necessary to format only the partition on which a clean installation of Windows 10 will be performed. You can, of course, make additional changes, but this is done if you fully understand the process, so that later you will not be offended by the lost information .
Now let's take a closer look at the items "Disk 0 Partition 1 -2 -3". As you can see in the picture above, they take up from 16 to 450 MB. So, these are service hidden partitions that are automatically created by Windows 10. They are needed to store system files and backups. Naturally, we do not take them into account and, in general, do not touch them.
As a result, after all the above manipulations, the file copying process should start. I’ll say right away that you will need to be patient here, since you won’t be able to skip this stage quickly.
Once completed, the PC should reboot and the configuration of various services will begin. First you will be asked to select your country of residence, language and keyboard layout.
Then all available Wi-Fi networks will be detected. If you wish, you can immediately set up the connection. In general, it’s very cool when the system immediately uses the laptop’s network adapters. In the future, this will make it much easier to install drivers from the Internet.
If for some reason you want to postpone this operation until later, select the “Skip for now” option. In the next step, the installer will ask you to enter a custom account name and password. By the way, you don’t even have to specify the last one, just leave the line empty.
After this, you will need to wait a little, then the system will reboot again. But this is the last time. And here it is, the much-desired desktop. This means that we succeeded!
Therefore, now we can safely say that a clean installation of Windows 10 from a flash drive via BIOS was successful. What's left to do now? Of course, it is necessary to update all device drivers, because some of them may be missing in the installation program. I strongly recommend this method.
Then all that remains is to install the necessary programs. Which ones and in what quantities you will think about yourself, and I will tell you about an interesting way to do this online in the next publication. So keep an eye on the blog for updates. And in conclusion, let's watch an interesting video.
Hello dear visitors. In this tutorial, I will show you how to install the latest Windows 10 on your computer or laptop. I'm glad that you came to this page and give me the right to teach you how to install Ten on your computer. Let's get started!
We will install Windows 10 from a flash drive, because it is much more convenient and faster than using classic DVDs. Using a Windows installation flash drive, we can install the system on computers, laptops and netbooks.
What do you need to do to install Windows 10 from a flash drive?
Creating a bootable USB flash drive
First of all, prepare an 8 GB USB flash drive and move ALL important files to other drives. Next, download the UltraISO program from the official website. We will use it to record the system. We will also need a Windows 10 image, preferably in ISO format. You can also download it from the Internet.
Download UltraISO and run it.
The program is paid, but fortunately Trial period will allow you to use it free of charge for 30 days. To install Windows 10 from a flash drive, we need UltraISO only once.
When you launch UltraISO, click the Trial button.
The flash drive should already be inserted into the computer.
Now in the UltraISO program, click the menu File - Open.
In the window that opens, indicate where the Windows 10 image is located on the computer and click Open.
The image files were successfully opened. Now click on the menu - Burn a hard disk image.
In the window that opens, it is important to make sure that in the Disk Drive item the flash drive we need is selected. If this is not the case, then select it manually from the drop-down list. There is no need to change anything else. Click the Burn button to begin creating a bootable USB flash drive.
Writing Windows 10 to a flash drive usually lasts about 10 minutes. When finished, close all unnecessary windows and let's move on to the next step.
Install BIOS and boot from flash drive
When starting to install the system, we need to go into the BIOS and put booting from a flash drive in the first place. Turn on the computer or restart it if it is already turned on. To enter the BIOS, immediately start pressing the DELETE or F2 key (depending on motherboard). We press the desired key for several seconds until we see the BIOS itself. This is roughly what it looks like:
We can navigate through this program using the arrows and the Enter button on the keyboard.
Go to the BOOT tab and find the item Hard Disk Drives. Let's open it.
We go to the first item and press Enter.
In the window that opens, select your flash drive and now it will be in first place. Great!
Press the ESC key to return to the previous window. Now select the first item Boot Device Priority.
Go to the first item and press Enter.
We select the flash drive again and now it is in first place in the download priority.
Great! Now the computer will boot from the flash drive. To save the changes made, press the F10 key and press Enter.
The computer is rebooting...
It is worth saying that in some BIOSes the interface is slightly different. In this case, you will have to look for similar buttons.
Installing Windows 10 from a USB flash drive
If we did everything correctly, then after restarting the computer, reading data from the flash drive will begin. This is indicated by the following Windows icon:
The start of the installation is indicated by a window in which we will need to select the system language, parameters and keyboard layout. Leave Russian everywhere and click Next.
In the next window, click the Install button, which is located in the middle of the screen.
In the next step we need to select the installation type. Select the second item " Custom: Windows installation only". Just what we need.
Now is a very important moment! We need to select the disk to which we need installWindows 10 . The disk on which the system was previously installed has type System. If you have other disks, then it is better not to install the system on them, so as not to lose important data.
As for the disk on which the system was already installed, it is better to format it, that is, delete old programs, Windows and other files. To do this, you need to specify the drive and select Format.
You can, of course, not format the disk, but in this case the previous files from the system disk will be placed in a new folder called WINDOWS.OLD.
I usually format the disk to remove all the junk accumulated on the old system!
Regardless of the choice you make, specify the disk for installation and click Next.
This is the main window where Windows 10 is installed in five steps. Here the files are copied and installed, that is, the process of writing the system to our computer occurs. You will have to wait 15 minutes.
Attention important point! When you see that the 5 steps are completed and after a few seconds the computer reboots, be ready to remove the flash drive from the computer.
The computer starts to reboot, and we immediately remove the flash drive! If this is not done, then Windows 10 installation may start again.
Fine. The system is almost ready for use. There are still some settings left to do. After the reboot we will be asked to connect to our wireless network. But note that you can skip this step. There is a link for this below " Skip this step".
I connected to WI-FI, so at this step I’m still downloading and installing updates.
Finally, we need to select the computer type. Of course, select the item " This computer belongs to me".
Then enter the login and password for your Microsoft account, if you have one. Or just click " Skip this step".
We give the account a name and, if necessary, come up with a password for it.
Great! So we figured it out, how to install Windows 10 from a USB flash drive and configure it before the first launch.
RESULTS
Let's summarize briefly. So, to install Windows 10 from a USB flash drive, we need to complete the following tasks:
1. Create a bootable USB flash drive
2. Set the BIOS to boot from a flash drive
3. Install the system from a flash drive
That's basically all. This concludes my lesson, I thank you for your attention and look forward to your comments.
Hello, my dear readers!
If you've ever installed a new operating system, chances are you've simply updated it. For example, from “seven” to “eight” and so on. Yesterday I tried to install the OS from scratch, and I had to do it through the BIOS settings. The matter requires care, but everyone should know these aspects. Today I will tell you how to reinstall Windows via BIOS, in different ways and from different media.
What is BIOS and what does it have to do with it?
To explain it in simple words, BIOS is a set of small programs that control the operation of your computer hardware. It is available on any PC, whether desktop or laptop. Without knowing the purpose of this or that section in it, I strongly do not recommend changing anything in it yourself. In the worst case scenario, you can simply burn the iron in your car.
For example, turn off the fan on the video card and that's it. The service will no longer help you here. But you still have to interact with the BIOS. Especially with the section that is responsible for the boot order from an optical drive, hard drive, flash drive or other device. This is necessary when installing the OS from scratch.
How to enter BIOS
It's very simple. This is done without a disk or flash drive. First, you need to restart your laptop. Or your desktop PC. As soon as the motherboard loading screen appears, you will see a picture like this.
Pay attention to the line that I indicated with an arrow. The default key is there DEL, and if it is pressed when such a screen appears, then you will immediately be taken to the BIOS. However, there may be other keys, for example: DELETE,F10, F11, F12, F1, F2, F3, Esc. Moreover, on some motherboards you can call up these settings not with one key, but with a combination of them. Here are the most common ones: Ctrl+Alt+Esc, Ctrl+Alt+Ins, Ctrl+Alt+S, Ctrl+Alt+Del, Ctrl+Alt, Fn+F1, Ctrl+Ins, Ctrl+Alt+Enter. You should see a window like this.
If this doesn't happen, it means you did something wrong. Try again.
Preparing for installation
Before installing the OS, you first need to download and burn it. Which version of Windows you prefer is up to you. I will only give links to distribution kits at:
- Windows 7.
- Windows 8.
- Windows 10.
To download images you will need program for downloading torrents. Just install it and download the distribution online. If this download method is not convenient for you, I suggest alternative option. This page has software that will help you download Windows and burn it to disk, just scroll to the bottom of the page and click here.
If you still decide to use torrents, then you will need another software to burn ISO. UltraISO. It will help you create a bootable disc or flash drive. Install it and open it.
Important: After downloading the distribution, be sure to check it for viruses, for example using Comodo Internet Security.
Let's imagine that you decide to install the operating system from a disk (don't forget to prepare it in advance). Open UltraISO and select the image of the downloaded system.
You can also do this through the menu " File».
Everything that is on the OS image should be displayed in the program window.
Next, insert a clean blank into your optical drive. Make sure that there is not a single scratch on it, otherwise it simply will not be readable. Then in the menu " tools"Click on this line.
You will see a window with a choice of drive, burning speed and the OS file itself.
Then simply press the button Write down" and wait for completion. That's it, you've just created a boot disk yourself.
Don't want to install the operating system from the DVD? I'll tell you how to do this using a USB flash drive!
Immediately insert it into the USB port and scan for viruses using AVG AntiVirus Free. Next, do the same with the UltraISO program until you select the “ tools" Now you select the “” partition and there click burn hard disk image.
In the sign that appears, select “ Yes"and wait for the end. But now you can start recording. Once the process is complete, you can remove the flash drive and proceed to installation.
Setting up BIOS for booting from media
Now let's set up the system. We go into the BIOS. You have already read above how to do this. The fact is, my dear readers, that the BIOS itself can be of two types. Award and AMI. And in each of them the setting will be different. I have written instructions for you so that you do not get confused.
Award BIOS – setup for booting from disk
As soon as the blue settings screen appears, click the second line where it says - Advanced BIOS Features.
Then in the second line (First Boot Device) click Enter and select your optical drive.
In the second line (Second Boot Device) do the same, but select the hard drive (Hard Disk).
AMI BIOS – setting for booting from disk
Here the principle is the same, but the course of action is slightly different and the interface is nicer.
In the first line we set our drive, and in the second line the hard drive. That's it, press F10.
If you decide to install Windows from a flash drive, then the algorithms are the same, but instead of the drive you select the USB-HDD line.
Everything else is the same. Reboot your PC. But don't forget to insert bootable media.
Installation process
Here is the final stage. Now that your bootable media has booted, you will see the operating system installer dialog box with a choice of language. Next you will have a window like this with a choice of installation type. Choose the full installation.
Then select the hard drive partition, format it and click “next”.
The system will do the rest itself, all you have to do is enter your username, select a region, configure the Internet and download the Dr Web Cureit antivirus. And that’s it, now you can install the operating system yourself via BIOS. Congratulations!
Conclusion
Setting up BIOS to boot from disk:
Setting up BIOS to boot from a flash drive:
Windows installation:
I want to warn you right away that it is impossible to do a complete installation of the system without a disk and flash drive! The carrier is needed in any case, so take care of this in advance.
With this I will say goodbye to you. Subscribe to my blog updates to stay up to date with the latest useful articles. Share information with your friends on social networks, because this information will be useful to absolutely everyone who has a computer! All the best to you and see you again!
It is not necessary to install Windows 10 on a computer or laptop from HP, Asus, Acer, Sony, Lenovo, Samsung, Toshiba from a flash drive or disk via BIOS.
It is possible through an update. In the second option, you do not need to enter the BIOS; it is simpler and no different in efficiency.
If anyone is interested, you will find a detailed description there. If you want to install via BIOS, read on. The first thing you need is to enter it.
ATTENTION: there is no one option to enter the BIOS - find out how to do it for everyone.
Now one more thing. You may not even need to enter the BIOS. Just insert the disk or flash drive from which you intend to install Windows 10 and press the Esc / F8 / F10 / F11 or F12 key when turning it on.
You can also see an inscription below in the form of the names of the keys and their combinations when you start your computer or laptop.
Remember only the keys, restart the PC and immediately when you turn it on, press them constantly until you see windows with a boot selection.
If a disk is installed, then you should see a DVD drive, if a flash drive, then the name of the flash drive.
One more thing, before installing Windows 10 via BIOS, be sure to turn on your computer or laptop and see how many GB are on drive “C” if you have several partitions.
This is necessary because you will not see the names of the section “C” or “D”, but only how many GB they have.
If the above did not give any results, then below you will find out how to do all this on different types of BIOS.
How to install windows 10 from a disk or flash drive via BIOS AMI
In order for the installation of Windows 10 to begin in the AMI BIOS, after logging in, go to the “Boot” tab. You can't do it with the mouse, only with the arrow keys (bottom right).
After the transition, click on the line: “Boot Device Priority” and click on “Enter”.
Then you will see that the first line “1st Boot Devise” is highlighted in white - press Enter. You can navigate there using the up/down arrow keys.
If you need to install from a disk, then select CD-ROM, if from a flash drive, then if it is inserted, it should be displayed.
It's not in the picture right now because I don't have it installed. You should have the line USB-HDD" or "Removable Devices.
When you decide what to install from, select the disk or flash drive using the up/down arrow keys and press Enter.
Now save the changes using the F10 key and agree to the message by clicking the Enter button. If something goes wrong, you can always take a step back with the Esc button.
How to install windows 10 from a disk or flash drive using Award Phoenix BIOS
In the Award Phoenix bios, control is also done using arrow buttons. To configure the installation of Windows 10, click on the line: “Advanced bios Feature” and click on: “First Boot Devices”.
Here, depending on the installation method, select CD-ROM, if from a disk, or USB, if via a flash drive.
How to install windows 10 from a disk or flash drive via UEFI BIOS
UEFI BIOS is more advanced, it even has Russian language (maybe not for everyone, but for me it is.)
If yours is in Russian (you can change the language on the first tab), then after logging in, go to the “download” tab.
Then in the boot priority section, click on the line “boot option #1” and assign a disk or flash drive as the boot device. If installing from a disk, select the drive.
If from a flash drive, select Removable Devices / USB and move the selected device to the top of the list. To save, click F10 and confirm Enter.
NOTE: very often, after changing the settings, the Windows 10 BIOS from a disk or flash drive is not installed.
Then immediately after logging in, try pressing either any key or the Esc button. Of course, undescribed problems may arise, then a question in the comments describing the problem will help. Good luck.
BIOS (Basic Input and Output System) is necessary for the computer to operate in principle. This is software that is “sewn” into the motherboard chips. Often we want to know how to enter the BIOS on Windows 10.
Before version 8, entry was made with a simple finger movement. As soon as the computer turned on, the F2 or DEL buttons were pressed and you entered the menu. In 10, a high-speed launch mode was introduced, and this step became simply unnoticeable. Try pressing DEL while loading. This works on most computers. If it doesn’t work, then proceed as indicated below.
How to run BIOS on Windows 10
First, let's look at an option that works on any computer or laptop. If your PC boots, then you can do the following:
1.Select options.
2. Go to the update and security section.
3. Click Reboot Now.
4. The computer will begin to restart. But it will be performed in a special mode. First you will see a window for selecting actions. Select troubleshooting.
5. Then go to advanced options.
6. You need to go to UEFI, that’s what the bios management program is called.
7. Then click the "Restart" button.
After rebooting, you will be able to get into the BIOS on Windows 10.
How to enter Windows 10 BIOS when the system does not boot
Here you will need an installation disk or recovery disk. Once you insert it, the reboot will begin. You will see a screen with an “Install” button and a “System Restore” link at the bottom.
After you click on it, you will be taken to the same menu. Proceed as described above.
How to enter BIOS on Windows 10 if DEL does not work
In this case, disable Quick Startup mode.
1. Click the magnifying glass icon next to the main menu button and start typing “Control Panel”. Options will appear at the top. Select controls.
3. You need to go to the section “Action of the power button”
4. Uncheck the “Enable fast startup” option.
After completing these steps, click the “Save Changes” button at the bottom and reboot. Press DEL as soon as the computer turns on. You must go to Bios.
How to enter bios on Windows 10 on a laptop
Laptops may have a separate button to log into UEFI. If you want to figure out how to enter the BIOS on Windows 10 on a laptop, you need to do the following:
- Find out the model or number of the device.
- Go to the official website of the manufacturer.
- Find documentation for your laptop.
If you have documents saved on your computer, look through them.
We will list how to log into Windows 10 bios for different brands:
- Lenovo. Laptops of this brand have a separate button to enter the menu. You can find it near the power button or next to the power connector, depending on the model. There is a curved arrow drawn on it.
- On an Asus laptop, you need to press F2 when booting. The trick is that when enabled, this button does not work if Fastboot mode is enabled. But when you reboot, you will be able to enter the Bios.
- On Acer, most models use the F2 button. If you can't log in, try Ctrl+Alt+Esc.
- In HP laptop models, the login button has traditionally been F10.
How to open bios on Windows 10 on a tablet
If you are the owner of a tablet with Windows 10 installed, then go as described in the second paragraph - through recovery.
There is no basic system as such on Android. You can enter the engineering menu by pressing a combination of the power and sound control buttons. For each brand this will be a different combination. We advise you to find documentation on the manufacturer’s official website and read about ways to enter Bios.
Bios settings for Windows 10
After we figured out how to enable bios on Windows 10, let's understand a little about its options regarding Windows 10.
In fact, the base system is independent of the operating system. She is more responsible for the operation of the hardware. You will need to get to the Boot menu if you are installing and restoring Windows 10 from a flash drive or disk. The boot device needs to be changed.
- Go to Bios using one of the above methods.
- Then select the Boot section.
3. Select the first boot device, Boot option #1, and press Enter on it.
4. Set the desired device to boot and exit with saving (Exit and Save).
If we talk about the Bios menu, we list the purpose of the main items:
- Main menu. Displays the main parameters of the PC, including the BIOS version.
- Advanced. Configuring processor, peripherals, video, PCI, etc.
- Overclocking. Allows you to set values for overclocking the processor.
- M-flash. Function for updating or backing up BIOS (available on MSI boards).
- Security. Setting a password for logging into the system.
- Boot. Used to install boot devices.
Depending on the BIOS version and motherboard and processor models, the menu may differ.
If you are planning to update your OS to version 10, then read about . If your PC is loading slowly, you need information about how the 0 .