Restoring silicon power 16gb. Software recovery of flash drives and memory cards Silicon Power. Signs that a USB device is faulty and needs to be repaired or restored

Losing information on a memory card is a very unpleasant thing. What if there was valuable information on the drives? Its loss can be a real tragedy, and a flash drive recovery utility can be a salvation. But before we describe the process of recovering information on a hard drive, let’s consider the possible reasons for the loss of information on memory cards:

Drive software failure. If your flash drive does not open and asks you to format it, this is exactly the case. It is usually caused by a crash of a special driver installed on any flash card. You can install it again, and then the drive’s performance will be restored. However, the information will have to be restored separately. - Virus attacks. Yes, picking up a virus by transferring information from one PC to another is as easy as shelling pears. Some viruses specialize specifically in deleting/damaging files. - Mechanical damage. May be caused by temperature changes, shocks, falls, etc. In this case, the memory card may become completely unusable. But even in this case, it is possible to restore information! - Incorrect operation. A flash drive and/or information on it may be damaged in cases where: you do not use the “Safely Remove Hardware” option, remove the USB drive while downloading, recording information, watching movies, etc.

Flash drive recovery programs

How to recover information on a flash card? In almost all of the above cases, special utilities for flash drive recovery will help us. There are a huge number of them now. We recommend that you use only proven software products. “Flash Drive Recovery 2.0” is a powerful utility for recovering flash drives. She is capable of:

Recover information on drives of different formats and manufacturers (Silicon Power, Kingston Datatraveler, Alcor Micro, Corsair Voyager) and of any size (4gb, 8gb, 16gb, 32gb).
Work in cases where the flash drive has been formatted many times.
Recover information even on damaged memory cards.

Recover up to 100% of deleted information.

Flash drive recovery software can recover data from any type of storage device (music devices, digital cameras, flash drives, USB drivers, PC cards, etc.). This utility recovers all damaged and deleted files, even if the memory card has been reformatted.

24.03.2017

Almost every person carries with him a USB drive on which various documents, photos or audio recordings are stored. Sometimes it happens that the flash drive is not displayed in Windows or does not allow you to write new information. Similar errors often occur on drives with two memory chips. For the well-known company Silicon Power, flash drives of 16, 32, 64 GB sometimes become unreadable on the computer or the message appears "Disk is write protected". Such problems can be easily eliminated with special programs.

Causes and symptoms of an error

In total, there are 5 reasons that may cause the device to malfunction:

logical errors;
physical damage to parts;
electrical overload and overheating of the carrier;
Damage to the memory controller firmware;
NAND memory wear or failure.

Logical errors appear when:

incorrect formatting;
sudden removal of the device during information exchange;
Using the wrong file system.

Physical damage, overheating, or an unexpected power surge most often damages the contacts on the board. They can be restored by soldering. But if the microcontroller is damaged, it cannot be repaired.

If the controller's logic program is violated, the following problems are observed on the flash drive:

not detected on the computer (there is a connection sound, but the disk is not displayed);
prohibition on recording new data;
no disk access;
The drive size is specified incorrectly.

To restore the device's functionality, you will need to reflash the microcontroller. But after performing this operation, all data from the disk will be irretrievably lost.

Method 1: SP Toolbox

Branded programs are most effective for restoring Silicon Power drives. SP Toolbox combines various components for flash drive diagnostics.

After diagnostics are completed, you can begin to restore the media.

Method 2: D-soft Flash Doctor

As a rule, flash drives store important information that you don’t want to delete. To avoid losing it, you can create a disk image. D-soft Flash Doctor allows you to scan drives, create and burn disk images. The software also allows you to restore a flash drive; for this, a full format is performed.

To perform a restore, follow the instructions:

Select the damaged disk.
Click "Recover media".

Method 3: SP G50 FW Update Program

To update the Silicon Power firmware, a special utility SP G50 FW Update Program has been created; it can be downloaded from the official website. Find the section on the page "USB drives" and click download.

The software is downloaded in an archive, which contains an .EXE file and English instructions for use. After launching the application, a window with a simple interface will appear.

In the main window it says that before clicking the button "Update" You need to make a backup copy of your data, since all files will disappear after flashing. It will be impossible to restore the information.

Launch the program.
Insert the Silicon Power flash drive.
In the window "Device" The device letter will appear.
If a window appears "Conductor" Windows, then be sure to close it.
Click "Update".

Wait for the process to complete. Typically this takes about 1 minute. After updating the firmware, you can continue to use the device for its intended purpose. If you previously made a backup, restore the data.

Method 4: Formatting and checking for errors

If third-party operating systems, such as Ubuntu, Kali Linux, etc., were previously written to the drive, then quite often after this a problem arises with recognizing the flash drive. This error is due to data formatting features in Windows and Linux.

If the drive is detected in the system, but errors like "Access denied", "USB device not recognized" etc., then check the flash drive for errors. To do this:

If the errors have not been corrected, then format the drive as FAT32 or NTFS.

First, try formatting the media as FAT32; if that doesn’t help, then use NTFS.

Method 5: Diskmgmt.msc

Sometimes incorrect reading can occur due to assigning the same letters to different drives. To fix this error:

The above steps allow you to restore the Silicon Power flash drive. To avoid errors in the operation of the media in the future, try not to interrupt the operation of the USB device while recording or deleting information. To recover media, in addition to proprietary programs from Silicon Power, you can use third-party software, but it is rarely better than utilities from manufacturers.

It's no secret that removable USB devices in the form of regular flash drives sometimes cause their owners a lot of problems due to their inoperability. And the information on them may be lost. In particular, this applies to Silicon Power devices. Restoring 16 Gb USB drives of smaller or larger capacity has its own characteristics. The main emphasis will be placed on them. But for all other removable media that support the USB data transfer interface and connection to the corresponding ports, this technique may be equally suitable.

The first signs of media damage

Unfortunately, it is the drives of this manufacturer that often refuse to work in normal (stationary) mode, when reading, editing or moving data must be done.

And here comes the very first problem associated with Silicon Power. Restoring USB drives of 16 gigs or more is impossible only because the operating system does not recognize them.

On the other hand, it is possible that failures and more serious problems may occur, both with software, which may often be missing in Windows systems, and with damage to the media itself, when not only the USB device, but also the controller responsible for it is not detected .

Silicon Power: USB flash drive recovery. General principles

Nevertheless, we will assume that the flash drive has no physical damage, nor has it been subjected to overheating or exposure to electromagnetic or other radiation that could cause failures at both the physical and software levels.

For this purpose, special utilities and software applets are used. On Windows systems, you can recover a Silicon Power 16 Gb flash drive only by specifying a disk scan through the command console. Let's move on.

Silicon Power USB drive recovery: features

The main problem is that devices from this manufacturer are not always detected by the computers to which they are connected. In other words, the installed operating system, be it Windows, Mac OS or Linux, cannot identify the file system.

Silicon Power devices, in principle, are initially supplied formatted, but only at the level of compatibility with memory cards (ext2/3/4), and Windows systems are not designed for this. Even the notorious version of the tenth modification is not always able to identify such a drive.

Formatting

The easiest way to fix the problem is believed to be formatting the media.

In this case, you cannot use only clearing the table of contents; you need to perform a complete formatting, which seems to completely destroy the data. No question - you can restore information even after this. For Silicon Power, recovery of USB drives must be done using special programs.

Recovery programs

In this case, programs for identifying deleted files and folders like Recuva (one of the most popular utilities) are not taken into account only because they are an absolute fake in the world of software and are not capable of restoring absolutely anything!!!

The R.Saver program or its analogue R-Studio looks much more acceptable. The interface, of course, is somewhat different, but both programs restore the file system regardless of what format the data was originally saved on the media.

It is also interesting that the initially launched scanning process of any removable device, be it a memory card or a regular flash drive, will scan the device so deeply that many users simply cannot believe their eyes. They see files deleted 5-10 years ago!!!

Restoring the controller

Restoring USB drives seems more difficult for Silicon Power in cases where problems arise directly with the controller (main chip). If it has no physical damage, which is usually the case, the point comes down to “reflashing” it.

To do this, you will need to download the appropriate firmware, having previously set the values of the VEN and DEV identifiers, which can be seen in the driver properties section in the standard “Device Manager”, as shown in the picture above. But in this case, you will have to pay attention to the fact that the process of restoring the operation of the controller can take quite a lot of time, and the information located on the media is almost always destroyed.

If such procedures do not help, the controller will have to be replaced, although in this case it will be easier to buy a new flash drive and not do stupid things. The issue of recovery is relevant only when the media contains particularly important information. This is where USB recovery utilities like R.Saver or similar software products can help, as they can read data in such a way that they can easily identify any deleted information even after the media has been completely formatted, be it a computer hard drive, flash drive or memory card. In other cases, such methods, although applicable, are not recommended. And interfering with the operation of the controller can cause many problems that were not present before.

Conclusion

Thus, based on all of the above, the only conclusion we can draw is that problems with USB drives of this type can be eliminated quite simply, provided that the malfunctions were associated exclusively with software problems. What to use? Don't be afraid to do even full formatting. Firstly, it will save you from problems with the file system and media recognition at the system level. Secondly, after using software products like R.Saver, information can still be restored. Some "minds" claim that this is not so. Judging by the reviews of users and specialists who give recommendations on various forums on the Internet, this sequence of actions seems to be the most preferable, unless, of course, we talk about physical damage to the media. In such a situation, if the user does not have extremely important data saved on the damaged media, it is easier to buy a new one than to engage in recovery procedures.

For the convenience of users, manufacturers of USB drives place their software on their official websites. Therefore, Silicon Power recommends flash drive recovery using the UFD Recover Tool software.

To do this, you need to go to the official website, register, and download the program directly in the registration window. In addition, on the same site there is software from the official partner of the Piriform company called Recuva File Recovery. It restores files deleted from the drive.

When inserting some USB storage devices into a slot, the computer incorrectly detects the amount of memory. There are known cases when the case was marked 32 GB, and when disassembled the chip turned out to be 1 GB in size.

Recovery Features

The most common case in which the Silicon Power flash drive recovery program is in demand is the inscription in the window: “Error, write protection” / “The drive is write protected.” A program to determine the controller being used will help you choose the optimal utility for restoring a Silicon Power 16 Gb flash drive. At the same time, it is very important to know the type of chip, since the software edition depends on it.

The ChipGenium program copes better than others with the task of recognizing a player or flash drive. It successfully interrogates most models, and for rare exceptions it takes data from the VId\PID database, displaying information about them with a high degree of probability.

Old versions of ChipGenium (3.0, 3.1) are useless for our chosen task, since they cannot poll devices. Operating system builds of the ChipXP, Zver, Windows PE editions will also not allow you to display the correct information. ASMedia controllers 3.0 are not designed for this utility.

The domestic software manufacturer is not lagging behind its Western competitors. ANTSpec Software produces Flash Drive Information Extractor software. The advantage of the utility is its compatibility with USB 3.0 ports from AS Media. Decrypted information is released only in program versions older than 7.0. I recommend this software for SMI, Phison, Innostor, Alcor controllers.

The last program needed to select the correct utility to recover a Silicon Power 8 Gb flash drive is ChipEasy. The utility polls the latest generation 3.0 connectors with errors, therefore, it is better to use the traditional 2.0 port. The operating principle differs from the previous two, however, the program confidently takes third place in the ranking.

Drive firmware

In difficult cases, when the programs discussed above are not able to restore a Silicon Power 4 Gb flash drive, I recommend flashing the device with one of the utilities and programs. To do this you will need to find out the VID&PID and follow the instructions:

The flash drive is pulled out of the connector
after launching the utility, the installation of drivers is confirmed, which should be removed automatically after flashing the firmware and closing the program
To do this, you need to manipulate the menu: Driver > Uninstall drivers
The flash drive is inserted into the PC, the OS offers to install a driver on it
click “Automatic”, after installation click Enum
Now the computer detects the device, you can click Start to flash the firmware
OK status means firmware without errors, otherwise you can decipher the problem using the error code (Menu Help > Error Code List)

At the penultimate stage, a problem is possible - the computer does not detect the device. In this case, go to: C:\Program Files\Program nameDriver\InfUpdate.exe, launch it by double-clicking, register the VOD&PID of the flash drive in it. Users who do not know this parameter can use ChipGenium. After flashing the firmware, the program should be uninstalled, otherwise the drivers will not be removed, and the OS simply will not see the flashed flash drive. At the last stage, in order to restore the Silicon Power b32 Gb flash drive, the drive is formatted using Windows.

Thus, you should first obtain accurate information about the controller and the type of chip. Then try to revive the media using the utility from the official website, and, if unsuccessful, use the firmware option followed by formatting using your OS.

Restoring a flash drive often helps restore its functionality and damaged memory locations. The only disadvantage of recovery is the complete formatting of the flash drive, which leads to clearing its memory of all data.

Silicon Power USB drives can be restored using several special programs that the company has released. In addition, you can use third-party recovery programs.

Recover Tool helps to fix damaged memory sectors of flash drives with Innostor IS903, IS902 and IS902E, IS916EN, and IS9162 controllers.

To restore the functionality of the flash drive, you need to download the program and run the initialization file.

Next, you need to connect the flash drive to your computer, and the program will automatically recognize it. If the software cannot detect the device, it means it cannot connect to the controller and the user should use another program.

If detection is successful, the “Start” button will appear. You need to click on it and wait for a message about the successful recovery of the flash drive.

The second program from the Silicon Power recovery package includes not only the ability to restore the functionality of a flash drive, but also other important functions.

First you need to go to the official website and download the program.

After downloading the program, you need to run the installer and wait for the installation to complete successfully. Next, you need to connect the flash drive to the computer and make sure that the program recognizes it.

Next, we will run diagnostics to detect errors. As soon as the program finishes the analysis, the test results will appear. If errors are detected, you will be offered to restore the memory of the flash drive and further format it, but if the media does not work correctly, but the program does not generate errors, most likely the problem is a virus.

To clean a flash drive from viruses, you need to scan it with an antivirus and perform the necessary cleaning option.

Formatting a flash drive is carried out in the “SECURE ERASE” menu, where the user will be offered two methods - quick formatting and full formatting.