Xiaomi JZEJ01JY hybrid headphones with active noise reduction (ANC). How to turn off headphones in a fly phone. Why don't headphones work with Xiaomi? How to remove the headset icon on the Mi headset phone, the headset does not turn on

Bluetooth headsets are convenient gadgets that allow you to communicate on the phone without having to hold your smartphone near your ear. This method of communication is convenient when riding a bicycle, car or while jogging. How to connect a Bluetooth headset to Xiaomi?

First, you need to open the notification shade and long press on the “Bluetooth” icon to bring up its settings menu. In the window that opens, activate the switch next to the “Enable Bluetooth” item.

Next, you should turn on the headset itself and activate visibility mode in it. Unfortunately, there is no universal method, since this is activated differently in different headsets, and to enable it you will need to study the instructions included with your wireless device.

Using the example of the Chinese “Noname” headset, this is achieved by long pressing the power button, where after the words “Power on” the message “Ready to pair” will sound. At this moment, the red and blue indicators in the headset will light up, which means you can try connecting it to your smartphone.

In the “Available devices” section, click on the name of the device that appears and wait until it appears in the list of connected ones. You may have to enter a pairing password, which will be written in the headset instructions.

Xiaomi smartphones are high-end, inexpensive gadgets that can reproduce high-quality sound through speakers and headphones. Sometimes users encounter problems where Xiaomi headphones do not work. When you connect a headset to the appropriate jack, there is no sound or distorted sound.

Causes of the problem

If there is no sound in the headphones in Xiaomi, the following factors may be the reasons:

• Short circuit on the device board;
• Moisture penetration into the connector;
• The wires through which sound is transmitted have been unsoldered;
• The connector is clogged;
• Loosening of the connector due to improper use;
• Mechanical damage resulting in breakdown of internal components;
• Software failures - the gadget does not see the connected accessory.

If there is no sound on your phone with a headset connected, try restarting your smartphone, checking the sound settings, and making sure the product is working properly by connecting it to another device. The accessory does not work after performing the above steps? Contact the professionals!

Connector repair is one of the popular reasons for customers to contact a service center. In the event that the Xiaomi Redmi 4X headphones do not function, a complete diagnosis of the device is carried out, which allows us to identify the cause of the problem and select the best solution, for example, replacing the connector.

Despite the reasonable cost of spare parts, disassembling the device requires experience and special tools. We do not recommend carrying out repairs yourself - entrust it to a qualified engineer who has branded spare parts and equipment in his arsenal. The cost of this type of repair is affordable!

24.01.2018

Why is the headset indicator on the display, and should I try to remove it myself?

The very first of the “advanced” phones differed from their predecessors in having wider multimedia capabilities. The moment when a mobile phone ceased to be a simple means of communication and became a player of files of various formats, without exaggeration, turned the whole world upside down.

The downside of frequently jamming your favorite tunes on your mobile phone is that sometimes there may be problems with the headphone port. When the headphone icon is on even after unplugging the headphones, it means the phone still thinks it's connected and refuses to switch the audio back to the speakers. This definitely causes problems making phone calls and listening to music. Some simple steps can solve the problem without any hassle.

It is very important to be careful when installing or removing headphones. If you are not sure, problems may arise. Turn off your mobile phone and turn it on again. This prompts you to rescan your hardware upon boot. This will often switch the phone out of headphone mode and restore normal functionality.

Today, every user carries with him an entire archive of his favorite music, having access to it at any time. But there are also some inconveniences, for example, duplicate images in the device’s memory that are linked to tracks - a problem well known to music lovers.

And if you can somehow remove album cover images from the gallery yourself, some other problems confuse even experienced users. We are talking about an icon that notifies the phone owner that a headset is connected. What should I do if it suddenly appears on the display by itself and does not disappear?

Remove the battery while the phone is turned on. This resets the temporary memory cache, which means that reinstalling the power supply and turning it on should resolve the issue. The wizard reboots the device if the problem persists. If the problem is due to a software issue, resetting the operating system will clear any errors that have been developed and restore the software to factory standard. Check your user manual for specific directions on how to do this, as not all phone models use the same directions.

Why the headset icon on the phone is on: the most common reasons

This “glitch” worries gadget owners not only for reasons of aesthetics. Indeed, in addition to the fact that the screen is clogged with unnecessary icons, the appearance of an icon is often accompanied by related problems. For example, all incoming calls are put into speakerphone mode. Or you will only be heard at the other “end of the line”, but you yourself will not be able to identify anything other than silence in the speaker.

Wireless headset problems

If a master reset does not solve the problem, it must be due to a hardware fault. Contact your cell phone supplier for replacement or repair. Once all software issues have been ruled out, all that is left are hardware issues. Unfortunately, your carrier's intervention will be necessary for further resolution. For a broken headphone port, they will either replace your device outright or teach you how to send your phone back to the manufacturer for repair.

Therefore, after the picture of headphones appears (if there are none), think about whether this could have happened due to one of the following reasons:

• moisture. This is the most common response to complaints about the constantly lit icon. Perhaps you were caught in heavy rain, or something spilled on the device - all this can lead to such a failure;
• connector socket is dirty. During operation, we don’t even think about how much dust penetrates into the gadget through the holes. Sometimes it settles and sticks together in the mini-jack itself, as a result of which the contacts become dirty, deformed and no longer close;
• a fall or blow - the most “severe” cases requiring contact to a service center;
• inaccurate removal of the headset from the socket - you did it at an angle, or abruptly, pulling the wire rather than the plug (this can happen, for example, after connecting the speaker to the phone).

But sometimes the image with headphones appears even without the above-mentioned reasons, for example, as a result of a software glitch. Is it possible to solve the problem without resorting to qualified assistance from the customer service?

If you are facing the same problem as described above, this article may be helpful to you. This is usually caused by a problem with the headphone jack itself. 99% of the time it is a hardware problem and not a software problem. If you notice that your earphone icon remains on. You can try to put a screen protector on it using a little water, trying not to get water in the holes. Well, water got inside, so the icon remained on the notification bar. Then plug and reconnect the headphone jack.

Way 2: Look inside the headphone jack

If you have a large vacuum cleaner and a free vacuum. You can use a wireless vacuum and within a few seconds of turning on the vacuum the icon will disappear! Is there debris inside? To perform a factory data reset, follow these steps:

It should be noted that if you suspect a breakdown of the 3.5 mm jack, it is strictly not recommended to take any independent actions. Indeed, many owners of phones (in particular, the once popular Nokia 6300, which is prone to such a failure) willingly share tips on forums on how to wipe dusty contacts, or how to pry them off.

How to remove the headset icon on your phone

✕ Can get hot enough to damage your ears ✕ Short battery life ✕ Unstable software ✕ Lacks water resistance ✕ Poor sound quality for music ✕ Faulty charging. They come in three colors: blue, white and black.

Once you remove them from their box, which also functions as a portable charger, you will feel like this is a new breed of gadget. In addition, the weight of individual buds is 6 grams - one whole gram is lighter than Braga. Extravagant design and comfortable fit are rarely compatible in the world of headphones. The headphone plinth is an elastic band or “wing”.

Don’t risk your gadget; the best solution is to contact a service center. In most cases, this breakdown can be repaired very quickly, and after a few hours you will be able to use your mobile phone again. And before going to the workshop, you can try several harmless methods:

Each wireless headset has two microphones: one on the top and one on the bottom, which provides strong audio during ongoing calls.

They are not fragile, just small.

Even better, you also get real-time statistics and updates on your current activities.

Let's take a closer look at these features.

In this sense, this one-hour battery life can act as a discreet safety measure.

Keeping them in the ears becomes increasingly difficult as the temperature increases. On the other hand, sound quality for music doesn't really matter. Yes, only one of the headphones will produce audio output under these conditions.

• Carefully connect and disconnect the headphone plug several times. If it doesn’t help, you can try to insert it not all the way;
• if the phone's battery is removable, remove it for 10-20 seconds and then turn on the device again;
• Sometimes it helps to install applications that switch the sound to the correct output automatically (for example, Toggleheadset in the Play Market for Android).

Usually these manipulations are enough for your mobile device to start working normally. In the event of a serious breakdown, none of the methods described above will help, and then immediately take the phone to a service center. There they will not only help you repair your device, but will also recommend, for example, new firmware for Fly FS504, which will make the smartphone less vulnerable to this type of software failure.

This is only when used in conjunction with a smartphone, which both sides work well.

But even when playing stereo sound, the quality is rather unimpressive and sounds too harsh. Each of the two embryos has a 47 mAh battery. In daily work, listening to music while exercising, where health data is collected, the battery life is usually about three hours.

Additionally, there is a big tendency for there to be a discrepancy between the right and left headphone charge levels.

Modern mobile gadgets have many additional accessories, the most popular of which are headphones. But what to do if Xiaomi does not see the headphones? A situation often happens when we connect a headset to the audio jack, but the smartphone does not detect them. Many users complain about poor sound with interference, while others only have one earphone working.

In some cases, the charge level on the right side was 100 percent, while the left side was at zero. The cause appears to be related to humidity; It is important to keep the connectors dry and clean, or problems may arise. As a gadget designed for sports, it's disappointing that there isn't any water resistance, but at least it encourages users to take care of them.

Rating: 6. What are the new features compared to the previous model? How is it possible that the call time will be “unlimited”? What are the benefits of narrowband audio broadband? Traditional office desk phones are limited in their audio bandwidth. Current mobile phones on the market only support narrowband audio.

We will tell you the most basic reasons for this problem and share tips that will help you fix this problem.

Wireless headset problems

People who just purchased wireless headphones cannot connect the wireless device to their smartphone for quite some time. Some users think that the headphones or something with Bluetooth on the phone is not working.

What is adaptive strength and why is it beneficial in the office? Therefore, the closer to the base unit, the less the radio station emits. A warning will be issued if your headset's battery is low. Wireless headset echo is very common and this is a simple fix. Depending on your phone's original volume, you need to set the wireless headset ringtone. using any of the following steps.

If you do not hear the dial tone, try the following settings. Make sure the headset is fully charged. Make sure your headset is signed to the base if you have a spare or new headset.

Make sure the handset lifter raises the handset high enough to operate the switch - adjust the height setting if necessary. Change the configuration switch on the base until you hear a beep.

In fact, everything is different: when you turn on the headset, you must go to “Search for Bluetooth devices" on your smartphone and select the device to connect so that pairing between the gadgets occurs. Simply activating Bluetooth will not give a positive result.

Dust in the connector (headset mode does not turn off)

This reason may seem funny to some people, but it does exist. If you rarely use headphones, then it is likely that your aux connector is dirty with dust or other small debris. The main central contact of the plug may have a poor connection with the contact pad in the socket, as a result of which the phone does not recognize the connected headphones or, after disconnecting them, the headset mode does not turn off.

If the wireless headset volume is still too low, adjust the desk phone listening volume on the base. If your phone has a volume control, turn it down until the distortion goes away. For most phones, the setting is position 3.

If distortion is still present, adjust the headset audio volume to reduce the volume of the headset speaker. Check and make sure there are 12 inches between the base and the computer, and 6 inches between the base and the phone. Changing the range setting can help with the wireless headset's audio quality, increase user density, or limit users' range. When the system is not in use, press the subscription and desk phone buttons simultaneously for 3 seconds. The work phone button flashes green over a long distance. . To change the mid range setting, press the subscribe button again within 3 seconds.

Try to carefully clean the socket with a needle or mini screwdriver. Do this with your smartphone turned off to avoid short circuits. This method has been tested on Xiaomi Redmi 4 with firmware version 7.

Software problem

Many users report that their devices stopped accepting the headset after updating the firmware to version 8. There are 2 options to solve the problem:

The desk phone button is flashing yellow. To move to the low range setting, press the subscribe button again for 3 seconds. Below are instructions for pairing your mobile phone with the base. The base will remain in this mode for 10 minutes.

If it goes out, you will need to press it again. When this happens, you will not hear any sound from the external speaker, including music or ringtones. Older versions of the device may display a headphone icon on the top bar. Fortunately, you can try to solve this problem yourself.

• roll back to the old version;
• install Miui 8 with full formatting.

If you like the new firmware and don’t want to roll back, then simply format the device’s system data and install the new firmware version from scratch. This method has helped many.

Incompatible pinout

There are 2 main standards for wiring audio plugs: OMTP and CTIA. Each of these types always has three main contacts, and in the case of a headset - four. Most often, problems arise with a 4-pin headset. The fact is that the GND (common, ground) contact on the old type of pinout - OMTP was the first (from the wire), then there was a microphone, the right earphone and the left channel.

Reason 1: The headphone jack is dirty

Make sure your sound problem is not caused by the volume being turned off by the volume buttons or the muffler switch. There may be a lint or other debris stuck in the headphone jack. If you find something in your headphone jack, here are some things you can try to troubleshoot.

Reason 2: Headphone Jack

Use a toothpick to try to carefully pick out any lint, fluff, or paper from the device. Some users have reported success by putting their mouth into the headphone jack or using a vacuum cleaner hose on it. Be careful not to allow the cotton to tear and remain in the nest. Some users have chosen to loosen a cotton swab with distilled water or alcohol for better cleaning results.

Reason 3: Headphone jack stuck

• Use a small cotton swab to clean the nest.
• Try gently blowing up the jack with a hairdryer.
• Make sure your mouth is dry if you try this.
• Let the device sit in a warm area, like a sunny windowsill.
• Sometimes the socket is simply jammed or stuck.
• Try gently tapping the device.

In the new pinout type (CTIA), GND and microphone are swapped. Accordingly, if you are using old headphones on a new device, then they will not suit you. For example, Xiaomi Redmi Note 3 Pro does not see old OMTP headphones; the device is only compatible with new headset models.

The phone sees the headphones only for the first 3-5 seconds

If, when connecting headphones, you see the corresponding icon in the status bar only for the first 3-5 seconds, and then the connection is interrupted, then the following trick, invented by forum users, can help:

1. Do not insert the headphones all the way
2. The headphone icon should light up
3. Then after 5-10 seconds insert the headset all the way

Surprisingly, but true, such manipulation really helps almost all users with this problem.

Conclusions

As you understand from the article, there are several reasons why the smartphone does not accept the headset. Don’t immediately panic and run to the service center for help. You can diagnose and fix the problem yourself. Experiment with headphones that your smartphone does not accept on another device. Perhaps this particular model is incompatible with your gadget.

Six months ago, while I was still in China, I bought Xiaomi Sport Bluetooth headphones from Gearbest (we worked with them a lot back then).

They attracted me precisely with their unusual shape.

Well, more precisely, how to say “unusual” - I just didn’t have sports headphones before. In general, when you look at Xiaomi Sport, it seems that they are made from the first Mi Band.

The headphones had many advantages, including protection from sweat, long battery life (up to 7 hours), and, in my opinion, a relatively low price.

The thing is very functional compared to many other “ears”; the design, of course, is very pale and cannot be compared with the same One More.

However, outstanding appearance is not very important here. What I liked most was the long battery life. They really last 6-7 hours. Charging via microUSB.

What I didn't like was the sound quality. It is average, and compared to any other wired headset it is very so-so. The tops are flat and featureless. The lows are powerful, but boomy. The same cheap two-driver Piston 4s certainly sound much better.

But it’s more convenient to practice with these. They don't fall out of your ears and stay in place like a glove. Volume and sound insulation are good. The controls are, however, inconvenient. Adjust the volume and turn it on and off on the earphone, and on the remote control there is only a button to answer the call.

The clip allows you to slightly adjust the wire so that it does not dangle.

In general, the feeling of the headphones is approximately the same as in . Everything is cool, I like everything. It can be better, but the price is quite small.

Six months have passed. In China I ran with them almost every day. I took a break in Russia, but still often traveled with them on the subway. Walked the streets. I didn't regret it. I looked recently and they look like this.

First I washed it with soap and water. It worked out more or less, but still not very good. The rubber parts were in place, nothing fell off.

The next stage is to wash everything possible with Fairy. Nothing seemed to dissolve. I replaced the silicone petals with new ones (they are standard).

The remote control was slightly scratched; it was not possible to wash it completely.

Otherwise everything seems ok. The headphones are almost like new. They work for about 5-6 hours now (time is not kind to batteries), the sound has not changed. Everyone also cheerfully announces in Chinese that they have connected to the device.

Total

Rumors that “the Chinese will crumble the day after tomorrow” are greatly exaggerated. You won’t believe it, but absolutely nothing happened to Xiaomi Mi Sport Bluetooth in six months.

I got them from Gearbest, a little less than $30.

Any equipment has an expiration date, and many consumers have come to terms with this. In order not to shorten the already short life of devices, owners try to be more careful when handling them, which is not always possible. Headsets for listening to music are especially susceptible to wear and tear, since every fifth person does not leave home without a player or smartphone filled to capacity with tracks.

At such moments, the most annoying thing is when the sound in one earphone does not work. This trouble does not allow you to fully enjoy a trip somewhere, and in general your mood spoils for the whole day. But what to do?

Reasons independent of the headset

It also happens that the device itself is fully functional, but the culprit is the negligence of its owner or incompatibility with the player. There may be several such options:

• loose fit of the plug into the connector;
• earwax contamination of the speaker;
• lack of necessary drivers on your smartphone/PC;
• the plug is inserted too tightly (the “magic” of some laptops).

These are not all the reasons why one earphone does not work. But they are the easiest to deal with, which is why they are considered first.

Problems getting into the nest

It would seem like a pretty stupid reason, wouldn't it? But no, most often it is she who is the culprit of the malfunction. To exclude this scenario, you need to check how tightly the plug is inserted into the connector of the playback device. If the headset does not fully fit into the jack, then it immediately becomes clear why one earphone is not working.

The contacts responsible for sound transmission are made in the form of rings surrounding the pin. If it does not fit into the connector all the way, the connection between the “ears” and the player is disrupted, since the elements needed to reproduce signals do not touch each other.

However, the opposite situation exists. Some laptop jacks may not be suitable for the connected headset. However, it will work if you pull the pin out slightly so that a small part of it is visible from the outside.

Lack of drivers

Why doesn't one earbud work when connected to a certain device? It's simple: the sound drivers are not functioning correctly or are not installed. Because of this, the audio equipment conflicts with the gadget’s operating system and connecting a headset causes all sorts of troubles.

They can be eliminated by installing the software, which is supplied on a disk complete with “ears” or is available for download on the official website of the equipment manufacturer.

Why doesn't one earphone work?

Among other things, the reason may be the owner’s untidiness and a simple headset model. If the owner of earbud headphones (meaning the shape) engages in sports or other hard work in them, after a couple of months the speaker will become clogged with earwax. And it will affect the sound.

In such a case, we can only thank the simple design of the headset, which is easy to disassemble and clean if necessary. But it is better to monitor the condition of the device more carefully so as not to encounter such a problem when one earphone does not work.

How to fix a damaged headset?

If all the easy options have been considered, but none of them were the cause of the breakdown, you will have to take the matter seriously. You will need to carefully inspect the cord, feel it and bend it several times at different angles near the plug or headphone speakers. Of course, if your fears are confirmed, you will have to part with them, but it is possible to make the device work a little longer without replacing the headset.

The faulty part of the old cord needs to be cut off, the wires stripped and twisted with the remains of the whole cable.

Wireless device

The measure described above should help in the case of a damaged wire (if one earphone does not work). How to fix a bluetooth headset? The answer, unfortunately, is not encouraging. Such equipment is most often not intended for self-repair by the owner, and anything can only be done if you have certain knowledge in this area. Therefore, you have to replace the device or contact a specialist.

Most often, such a problem occurs (one earphone does not work), but due to the high cost, any such breakdown is solved by warranty service centers. The same applies to other headsets released under well-known brands, so don’t despair. But if the purchase was cheap, replacing the device with a new one will be much easier and faster.