Bootable USB flash drive windows 7 winsetupfromusb 1. Create a multiboot flash drive using the WinSetupFromUSB program. Key program features

The WinSetupFrom USB program is a universal program for turning a regular flash card into a bootable device.

Difficulties for beginners may arise at the stage of managing this program, when, faced with a completely English interface, the user will simply close it and go in search of a Russified, but weaker in functionality program.

This article provides a user-friendly manual for the program.

Installing the program

Before you start working with the utility, you need to download WinSetupFrom USB. The problem is that it is so popular that many resources offer to download it from them, adding in a bunch of Trojans and suspicious programs.

This article provides instructions for WinSetupFrom USB according to its latest version, that is, 1.0.

How to Install the Official Windows 10 ISO Without Using the Media Creation Tool

The good thing is that no installer is required, just unzip the program and select the bit system that suits your computer. 32-bit and 64-bit available.

In general, this program is universal when working with flash drives, since in addition to creating a bootable and multiboot device, there are three more possible actions. But here the emphasis will be on the first.

How to open Control Panel in Windows 10

1. A window will open in front of you in which you can select the desired flash drive. In this case, the flash card will need to be formatted using AutoFormat it with FBinst, if you are recording images for the first time (don't forget to check this option), which will lead to the destruction of all data on it.

This is a necessary measure to create a multiboot device from a USB drive.

If the flash card has already been used in the WinSetupFromUSB program to create a boot device, then this step can be skipped.

2. Now you need to add the required installation software to the flash drive. If you download several distributions, the flash drive will turn into a multiboot device, which will significantly increase its functionality. This also needs to be specified in the options and the address to the required folders and files must be written in the line.

The line opens by pressing the button with «…» on the right side.

Below are options for different operating systems:

• Grub4dos is needed when installing a program from a Linux ISO (or other compatible ISO) or programs to restore the system, for example, antiviruses such as Kaspersky or RBCD. Then Grub4dos will be needed here.

• Bart PE (Win Builder or WindowsFLPC or UBCD4Win) - needed if the folder address includes I386. Their purpose is disks based on Win PE. This option is not for beginners.

• Setup2003 is used for Windows XP or Windows 2000 to add folders from these operating systems. Also provide the folder name if the address includes I386 (or I386/AMD). Here you need to create a virtual disk image and specify the path to the virtual drive. Or open the ISO image with an archive unpacker, extract the files into a separate directory and indicate its name in the WinSetupFrom USB window (indicate the name of the disk containing the distribution when creating an installation disk from a flash drive).

• Server 2008(2012) for Windows Vista 7th and 8th versions. You also need to register the address of the virtual image with the operating system.

• SysLinux BootSector, applicable if syslinux was used, is a file loader on a Linux system. Here you need to enter the path to the SYSLINUX folder.

Optimizing Windows 10 with built-in tools

Having entered all the necessary paths to the desired files, you can press the Go button, we go further according to the algorithm and in a few minutes you will have a ready-made bootable USB drive.

• A small correction for those who have Windows 7 or 8 - WinSetupFrom USB may slow down copying windows.wim. It's okay, it's a minute lag.

In addition, the WinSetupFrom USB program supports recording a virtual image weighing more than 4 gigabytes to a flash drive, but in FAT32 UEFI format.

First of all, it should be noted what a utility called WinSetupFromUSB is (read: win setup from usb). This is a fairly multifunctional, easy-to-use and free program for creating bootable flash drives for subsequent installation of various versions of Windows or other operating systems on any device.

However, despite all its positive qualities, great functionality, accessibility and free use, the program is not without its disadvantages. One of the most obvious disadvantages of the utility is, of course, the lack of support for the Russian language.

For the user, poor knowledge of English, or if a person simply does not feel very confident when working with various programs, has little understanding of how to create a boot disk, etc., we recommend reading the article to the end.

Where to download WinSetupFromUSB

The utility can be found on many different sites on the World Wide Web. However, it is advisable to download it exclusively from the official website, since often many third-party resources with programs, software and games, along with the WinSetupFromUSB utility itself, will come with foreign applications that clog up the computer.

This could happen that if you download the program from a third-party site, it will turn out to be an extremely outdated, no longer relevant version. For example, WinSetupFromUSB 10 beta 6 works much worse and less stable than WinSetupFromUSB 1.4 version. And in some cases, the program may even be supplemented with various kinds of intrusive advertising, malicious, third-party utilities and even dangerous viruses, for example, so-called Trojans.

The official website of the company that developed the WinSetupFromUSB program looks like this:

• http://www.winsetupfromusb.com

To download software from the official website, you must first go to the site through any web browser convenient for you, and then go to the “Downloads” tab, where you will need to click on the blue highlighted “WinSetupFromUSB 1.8.exe”. At the moment, this is the latest, newest version of the utility. Unlike the previous one, WinSetupFromUSB 1.6 or 1.4, the new one has a number of advantages:

1. Improved compatibility with the Windows 10 operating system.
2. The work of various subroutines has been updated and improved.
3. The utility itself began to work somewhat faster and better.

Launching and using the program

After the utility has been downloaded, run it by double-clicking the left mouse button on the file that has the format .exe or, if the downloaded file is an archive in the “.rar” or “.7z” format, then first unpack content using any archiver. The WinRar program or its free analogue 7-Zip is perfect for these purposes.

As a rule, when the software download is completed successfully, and the utility will be located in the hard drive memory of your device, be it a personal computer or, for example, a laptop, then the user may be faced with a choice of which version of the utility needs to be launched. After all, in the folder with the downloaded software there will be two versions of the program - one with the “x64” suffix, and the other without it.

The fact is that the Windows operating system has different versions. There are 32-bit and 64-bit. The numbers in this case indicate the processor architecture, and the higher the bit depth, the more random access memory (RAM) your operating system can use.

To be sure to determine the bitness of your version of Windows, follow these simple steps:

Now, having determined the bit depth of your OS version, proceed to directly launch the program . If you have a 64-bit version of Windows, then run the file with the “x64” suffix, and otherwise, without it, or in some cases there may be another suffix, as follows: “x86” (this is one of the designations for 32-bit OS versions).

Creating a bootable USB flash drive

Instructions for creating a bootable USB flash drive will look something like this:

After the process is completed, you can use this flash drive for subsequent OS installations on any devices that support this operation.

I have already touched on the free WinSetupFromUSB program for creating a bootable or multiboot flash drive more than once in articles on this site - this is one of the most functional tools when it comes to recording bootable USB drives with Windows 10, 8.1 and Windows 7 (you can simultaneously use one flash drive), Linux, various LiveCDs for UEFI and Legacy systems.

Despite the fact that creating a bootable flash drive is not all that can be done using this utility (which includes 3 additional tools for working with USB drives), this task is still the main one. Therefore, I will demonstrate the fastest and easiest way to do it for a novice user (in the given example of use, the flash drive will be formatted before writing data to it).

Images that can be added to a bootable USB flash drive WinSetupFromUSB

• Windows 2000/XP/2003 Setup- we use it to place the distribution kit of one of the specified operating systems on a flash drive. As the path, you need to specify the folder in which the I386/AMD64 folders (or only I386) are located. That is, you need to either mount an ISO image with the OS on the system and specify the path to the virtual disk drive, or insert a disk with Windows and, accordingly, specify the path to it. Another option is to open the ISO image using an archiver and extract all the contents into a separate folder: in this case, you will need to specify the path to this folder in WinSetupFromUSB. Those. Usually, when creating a bootable Windows XP USB flash drive, we just need to specify the drive letter with the distribution kit.
• Windows Vista/7/8/10/Server 2008/2012- to install the specified operating systems, you need to specify the path to the ISO image file with it. In general, in previous versions of the program it looked different, but now it has been made simpler.
• UBCD4Win/WinBuilder/Windows FLPC/Bart PE- also, as in the first case, you will need the path to the folder that contains I386, intended for various WinPE-based boot disks. A novice user is unlikely to need it.
• LinuxISO/Other Grub4dos compatible ISO- will be required if you want to add the Ubuntu Linux distribution (or other Linux) or any disk with utilities for computer recovery, virus scanning and the like, for example: Kaspersky Rescue Disk, Hiren’s Boot CD, RBCD and others. Most of them use Grub4dos.
• SysLinux bootsector- designed to add Linux distributions that use the syslinux boot loader. Most likely it won't be useful. To use, you must specify the path to the folder in which the SYSLINUX folder is located.

Update: in WinSetupFromUSB 1.6 beta 1 it became possible to record .

Additional options for writing a bootable USB flash drive

Video instructions for using WinSetupFromUSB

I also recorded a short video that shows in detail how to make a bootable or multiboot flash drive using the program described. Perhaps it will be easier for someone to understand what's what.

Conclusion

This completes the instructions for using WinSetupFromUSB. All you have left is a computer, use the drive you just created and boot from it. As noted, these are not all the capabilities of the program, but in the vast majority of cases the points described will be quite sufficient.

In this article we will look at, how to create a bootable USB flash drive and write Windows to it using WinSetupFromUSB.

As a flash drive, you can use not only a regular flash drive, but also a memory card. For simplicity of presentation, we will use the common name - flash drive.

This article will be useful to all those who wish to independently use the utility WinSetupFromUSB create a bootable USB flash drive, so that you can install Windows from it later.

WinSetupFromUSB is a free program designed to create a bootable flash drive and record an operating system on it (Windows 2000/XP/2003/Vista/7/Server 2008; Linux) with subsequent installation on a computer, laptop, netbook, etc.

What is needed for this:

1) Flash drive with a capacity of at least 4 GB;

2) Windows, which needs to be written to a flash drive;

3) Utility WinSetupFromUSB;

After you have downloaded the archive WinSetupFromUSB unzip it using some archiver. You will see a folder called WinSetup-1-0-beta6. Open it

First, let's prepare a flash drive

Connect the USB flash drive and format it to the NTFS file system. You need to format it using the Bootice utility (located in the WinSetup-1-0-beta6 /files/tools folder). When formatting, all information on your flash drive will be deleted! Copy it if necessary. So, first we launch our utility called Bootice:

Select your USB device from the list and click Perform Format to continue.
In the window that opens, select USB-HDD mode (Single Partition) and click Next Step:

Select the NTFS file system instead of FAT32 and click OK, agreeing with all subsequent messages and waiting for formatting to complete:

Now we return again to the original Bootice window and click on the Process MBR button (do not confuse with the Process PBR button):

Click on the Install / Config button and agree with all subsequent messages. Examples of such messages are shown in the screenshots below:

So, we have successfully completed the first stage of formatting the flash drive and this window can be closed. Now from the WinSetup-1-0-beta6 folder run the file WinSetupFromUSB_1-0-beta6. A program window will open WinSetupFromUSB. In the “USB disk selection and format” window, select your flash drive from the list if it is not displayed:

Next, you need to find your folder with Windows installation files and write it to a flash drive. This should be done as follows: if you want to write down Windows XP, then check the box next to the window Windows 2000/XP/2003 Setup, and if you want to write down Windows Vista, Windows 7 - opposite the window Vista/7/Server2008 - Setup/PE/RecoveryISO. Let's look at the screenshots:

For Windows XP

For Windows Vista, Windows 7

Then indicate where the Windows folder is located on your computer. To do this, click on the button highlighted in red in the screenshot, select the local drive and the Windows folder that you want to record.

Click OK and go to the next program window WinSetupFromUSB. Here we see that the path to the Windows folder is displayed (underlined in red), which you specified in the previous window. To start the recording process, press GO:

That's it. The recording process ended with the message: “Job Done” which means: “The job is done”!

Click OK and close WinSetupFromUSB. Thus, you have created a bootable USB flash drive from which you can now install Windows.

Please write questions, suggestions, reviews in the comments.

Creating bootable flash drives is a very popular task today, so instructions for using , a program that best helps in solving this problem, will be very relevant.

Interestingly, WinSetupFromUSB has other similar functions, but we will look at all of them during the instructions.

The use of this program begins with downloading it and this point should be given a little attention.

Where to download

Advice: Shouldn't searchWinSetupFromUSBin any search engines!

The fact is that this program can be found on our website.

If you download from other sites, a problem may arise, namely, most sites post already “added” programs.

And they are supplemented with all sorts of advertising and malware, even dangerous viruses such as Trojans. And there are also situations, as shown in Figure No. 1.

As you can see, here on the official website the program download button is shown in a red frame. But special attention should be paid to what is written next to “Download for free.”

And it says “version 1.0 beta”. This means that an old version is posted on this site. After version 1.0, which was released in 2013, version 1.4 was released in 2015.

Today there is version 1.6 on the official website.

By the way, you should download it from the site winsetupfromusb.com. Downloading it from there is quite simple. To do this you need to do the following:

• Go to winsetupfromusb.com.
• Go to the “Downloads” tab, which is highlighted in Figure 2.

Scroll the page down a little (scroll the mouse wheel) and click on the inscription “WinSetupFromUSB 1.6.exe”, which is also highlighted in Figure No. 3.

Note: Usually on this page the tab with the latest version of the program is already open. But if it is closed (the page will look like shown in Figure 4), you should click on the “+” sign (highlighted in the same figure), after which the tab will open and the link will become visible.

• The user will then be taken to the download page. There you need to click on one big “Download” button.

Installation and launch

After the program is downloaded, it, of course, needs to be opened. To do this, simply launch the downloaded file. It will look like shown in Figure 6.

As you can see, the installation file is a zipped image of the program in question. After launch, we are convinced of this - we see the window shown in Figure 7.

In this window you need to select where the actual WinSetupFromUSB file will be unpacked. By default, there will be a folder in which the downloaded file is located.

To select another location, you must click on the button shown in Figure 7 with a red frame. After this, a window will appear, highlighted with a green frame in the same figure.

There, in fact, you should select where to unpack the WinSetupFromUSB launch file and click the “OK” button. She's the only one there.

After this, click the “Extract” button, that is, “Unpack”, highlighted in blue. Next we will see the unpacking process visually.

This window is also shown in Figure 8.

This window makes it possible to pause the process at any time (the corresponding button is highlighted in green in Figure 8), return everything to its original state (button in a red frame) or quit altogether (button in a blue frame).

Now in the storage location on our computer that we specified, we find a folder called “WinSetupFromUSB-1-6”. It will look something like what is shown in Figure 9.

Interestingly, this folder will not necessarily be the first in the list, even if you sort by creation date. So don't be surprised if you don't notice it right away.

This phenomenon is especially common in Windows 7. The contents of this folder are shown in Figure 10.

As you can see, there is a version for 32-bit versions of Windows (underlined in red in Figure 10) and for 64-bit (underlined in blue).

Accordingly, in order to run the program in question, you need to run the program according to your version of the operating system.

Using the program

After this, the most important thing begins. At first everything looks as shown in Figure 11.

There are five main fields here:

1. Flash drive selection field;
2. Additional utilities;
3. Field for selecting the operating system that will be on the flash drive;
4. Additional options;
5. Process options (progress bar and “Start” and “Exit” buttons).

The main task of this program is to create a bootable USB flash drive. Therefore, it is necessary to describe at the very beginning how exactly this process occurs.

Creating a bootable USB flash drive

To perform this task, you should run WinSetupFromUSB and do the following:

• Insert the flash drive into the computer. After this, it will automatically appear in the window underlined in Figure 12 with a red line.
  If it still does not appear, you should click on the “Refresh” button, that is, “Update”, because it is quite possible that the program will not be able to immediately find the drive.

• Now we need to choose which operating system we will write to the flash drive. To do this, put a checkmark next to the OS that we will record. After this, click on the selection button, which is shown in Figure 13 in orange.
  A window with a green frame opens. In it we select the ISO image of the system that we are going to write to the flash drive.

• After this, all that remains is to press the “GO” button, which is located in area number 5 in Figure No. 11. Next, the recording process will begin.

As for additional functions, there are quite a lot of them. The main ones are shown in area number 4 in Figure 11. They relate directly to the recording process.

For example, the “Advanced options” button is responsible for advanced options.

If you check the corresponding box, the window shown in Figure 14 will appear.

All these are specialized functions that relate to a particular operating system. More information about them can be found in the descriptions for these operating systems.

If you don't know what each of them means, it's best to leave all of these features alone.

If you check the box next to “Show Log”. This is a simple feature to show each step of the recording process. Very useful in cases where some error occurs.

Finally, the “Test in QEMU” checkbox is responsible for special testing of the flash drive, but this is a very risky function that can erase all data from the drive.

In general, it is better not to touch it at all.

Additional features

As mentioned above, WinSetupFromUSB has a number of additional utilities. You can find them in the area indicated by number 2 in Figure 11.

For example, there is a very useful utility called “BOOTICE”. It looks as shown in Figure No. 16.

BOOTICE is responsible for converting or returning the MBR (master boot record) and PBR (boot code) on the flash drive.

This program makes it possible to install Grub4DOS in MBR or BOOTMGR in PBR and so on.

Again, if you don’t know why all this is needed and what it is in general, then it’s better not to touch BOOTICE. Although all these functions are very useful.

Using this utility is very simple - to do this, select the appropriate drive and press the desired button.

To put it simply, it is designed to format flash drives, but not in the usual way, but using a special type of structure.

In particular, it is often used to make USB-ZIP flash drives from USB-HDDs.

Working with this utility is quite complicated, but if you’ve already found it, you should probably know which buttons do what.

Finally, the last utility in this section is called RMPrepUSB. It performs all the functions of the two utilities described above and much more.

In addition, it has a very user-friendly interface. The most important thing is that there is Russian language here.

It can be selected by changing the options in the frame highlighted in green in Figure 18.

It is also very convenient that when you hover your mouse over each function in a window highlighted in yellow, its description appears.

By the way, it is short here, but very understandable.

In general, all this can and should be used. And it will be very easy to understand their use.

Visual instructions for using this program are shown in the video below.

How to create a bootable USB flash drive - WinSetupFromUSB

Instructions for using WinSetupFromUSB - Full description