How to turn on the light indication on iPhone. How to turn on the flash when there is a call on your iPhone

We have often noticed how other people's iPhones blink with flash when incoming call, but still don't understand how to do it on your device? No problem! Everything is done in a few clicks in the smartphone settings, so no Jailbrake is required for this operation.

Attention! By default, this option is intended for people who have a disability and therefore cannot hear audio. Although it's strange why Apple hasn't yet added flash on calls as a basic setting for every contact.

Now all incoming calls, messages, for example, in Viber, will be accompanied by a blinking back cover your iPhone.

Why is this option needed?

As mentioned earlier, by default it is aimed at people with disabilities, but many users appreciated its usefulness and also decided to actively use it. It helps in cases where, for example, the smartphone is face down and there is no way to hear the call or you have set it to silent. Very often this opportunity helps to wake up, for example, if you have silent mode, and at the same time the room is very dark.

It helps even when the device’s speaker does not work, and what’s worse, the silent mode. This is the only way to understand that at the moment an incoming call is received if the phone is at a distance from you and there is no way to look at the display.

But there is also a small minus here. Since a built-in diode is used, the phone discharges faster. And if you consider that the flash blinks both during calls and when notifications are received in the form of messages from various instant messengers, then you can expect a significant drain on the battery.

Important to know! Flash when there is a call can only be activated on iOS 5.0 and higher, so it is available iPhone owners 4 and other more modern generations.

How to disable?

If you are tired of the flash during incoming calls, you can disable it in just a few clicks, just like connecting it.

Possible problems and solutions

I don't have such an item on the menu. Check iOS version. If it is below 5.0, then update your smartphone. Activating the flash on a call is available from the iPhone 4, and if your device is an older generation, then there is nothing you can do.
Activated, but doesn't work. Check to see if the flash option itself is working correctly. To do this, turn on the camera, select manual flash mode and try to photograph some object. Most likely, the module has become unusable and you will have to contact a service center.
Doesn't work when I use an iPhone. The function only works on a locked screen, that is, when your smartphone is not unlocked and the Home screen is not lit. This is quite logical. If the phone is unlocked, it means that you are performing some operations at the moment, and a flash is not required for an incoming call.

You can activate this option at any time and set it for incoming calls and notifications. Similar features exist in other Android devices, and if you own one, dig into the settings!

Stylish, fashionable, youthful - this is how one can characterize the new trend of all Fayphone lovers (and not only). Someone came up with the idea of turning on the flash blinking while talking on the phone, and people quickly fell in love with this feature. True, not everyone knows how to enable this function - today we will teach everyone how to turn on the flash on an iPhone during a call and conversation.

Turning on flash on iPhone

First time users popular smartphones from Apple - iPhone, could observe the flash on devices of the fourth series. Previous series did not have this component, but users could purchase it separately. The additional accessory was called Iflash. Starting from the fourth series, all modern Apple phones are equipped with a flash. The component itself is located on the back of the device.

Any adult is certainly aware of the functions of the flash - to create additional lighting for even more high-quality photo and video filming. But Ice Flash in Apple smartphones has several more functions that are very useful for users. Often the flash is used as a notification signal. Smartphone owners who activate this function can not only hear the ringing signal, but also see it. However, not everyone has an understanding of how to turn on the flash on an iPhone when making a call.

In order to use this function on iPhone, you must complete preliminary settings.
Algorithm of actions for standard setting flashes as notification:

Go to iPhone desktop showing application icons.
Find the Settings application and launch it.
In the settings menu, find and select the “Basic” section.
In the list of basic settings, select the command “ Universal Access”.
Activate the “LED flash for warning” function.

If all the steps are completed correctly, you can start using the new feature and enjoy it. The smartphone will blink not only for calls, but also for other notifications:

incoming messages;
activating the alarm.

Flicker mode is active when the phone is locked or sleeping. If the device is active and its display is lit, there will be no notification signal. Overall this is good advantage for the user. When lit home screen, he is without additional signal recognizes the arrival of a notification, and the absence of a flash saves battery consumption.

Applications to turn on flash when calling on iPhone

During the years of initial development Appstore, its virtual shelves were filled with apps for turning on the flash on phones. These programs are called flashlights. This diversity had a simple explanation - creating an application is very easy. The program has only one function that activates the flash. However, due to its simplicity, the development of such applications did not arouse interest among professionals, and amateur versions were no different good quality. Understanding this, representatives Apple removed all flashlights from the store, adding new feature into the phone device. Nevertheless, developers continue to offer their versions of flashlights on the Appstore; today there are about ten of them. The programs are practically no different from each other and have a similar name. To find them, it is enough to search bar Appstore set the word “flashlight”. For example, the following applications are in great demand:

LED flashlight HD from smalltech sarl;
Flashlight Ⓞ from iHandy Inc.

How to turn off the flash when making a call on iPhone

Flash on smartphone Iphone- a useful and necessary function, but sometimes situations arise when you need to disable it, for example, while sleeping. Disabling the additional flash function occurs in the same way as turning it on. You must adhere to the following algorithm of actions:

On your smartphone, turn on the Home screen and go to the desktop with application icons.
Find the “Settings” icon and click on it.
In the settings window, select “Basic”.
In the list of basic settings, select “Universal Access”.
Scroll the list that opens until the “Led flash for warning” item appears on the screen.
Move the switch slider next to the item name towards disabling.

If all commands are executed in the correct sequence, the notification flash effect will be disabled. You can check the result obtained on the next incoming call.

What to do if the flash doesn't work?

Flash not working mobile device Apple - common problem, which iPhone users access service centers and create topics on various thematic forums on the Internet. The malfunction is not only an aesthetic problem, but also creates inconvenience for people who are accustomed to additionally using the flash as a form of notification.

The flash does not work for the following main reasons:

Due to liquid entering the device, moisture has formed in its internal mechanism, causing a short circuit.
The device suffered mechanical damage, as a result of which small cracks formed and damaged the system elements.

If there is a problem with the flash, first you need to carry out a simple diagnostic of the functionality of the function. To do this, you can check the settings and take photographs. If the smartphone was used for a long time, the flash may not work due to overheating and you need to wait until the device cools down. If the function stops working due to a software glitch, you need to perform forced reboot iphone.

Advice: If the phone components are mechanically damaged, there is no need to try do-it-yourself repair. A reasonable solution is to put the device in the hands of service center professionals.

World famous mobile phone manufacturer Apple devices is famous for its special attitude towards people with disabilities. The devices of this manufacturer are maximally adapted to the needs of such people. The functions of Apple smartphones are adjusted to various physiological limitations.

But, oddly enough, similar functions can be useful for healthy people. For example, many iPhone owners note the convenience of visual notification of an incoming call or SMS - a message that appears with a flashing flash when there is a call from another subscriber. This article tells you how to turn on the flash on your iPhone. To begin with, we note that this function can be activated on iPhone 5, iPhone 5S, iPhone 6 and other models of Apple phones.

For the first time, LED flash was introduced into iPhones fourth generation, and only then - in the iPhone 5S model and many other versions of gadgets. Flash on iPhone more early version(3rd and previous) was missing. However, those who wished could buy an additional flash accessory for the device, which, when connected to the device, replaced the flash on the iPhone. It was a kind of prototype of modern ice technology.

But the iPhone version 4 flash was already built-in. And subsequent devices also began to be equipped with this element. The LED is now located on the back of the smartphone next to the camera. Its main function is to maintain the required level of illumination when shooting photos and videos. But not only this - flash ice also performs other important tasks, which will be discussed further.

How to turn on the flash on an iPhone

According to the default settings, incoming calls on iPhones are accompanied by a polyphonic melody and vibration, which are created by an incredibly small vibrating motor. Gadget owners can select any track to play on a call, as well as set a certain vibration to any contacts. For most users, this variety of functions is quite enough, but others want to further emphasize their individuality. Another way to notify about a call is very quickly. This will be a very bright signal when calling a subscriber and receiving an SMS message.

So, to turn on the flash on an Apple phone and set it as an alert when receiving an SMS or incoming call, you need to do the following:

Go to your menu mobile gadget and go to the main settings by selecting the accessibility section.

In the Hearing section, click on the warning flash switch.

That's all! That’s how easy and simple – in just 2 steps – you can set the flash for calls and SMS. Now, in addition to displaying calls in the form sound alerts and vibrate mode, the user will be able to recognize calls by a bright flash. The optical call indicator will be especially useful for people with poor hearing or deaf-mute people, but for everyone else it will be a unique feature.

However, it should be noted that the indication will only work if the gadget’s display is in a locked state. If this is not the case, a notification will appear on the screen when there are incoming calls, and the flash will not blink. But it is absolutely clear that in such a situation this is not necessary. Thus, the manufacturer carefully thought out the use of this function on the iPhone, although it is not the most important. In the described situation, battery charge is significantly saved.

Apple products always have additional features for people with disabilities. And iPhone is no exception. In its settings, in the “Universal Access” section, there are a lot of functions that are designed to help such users.

Among other things, the option to turn on the flash when making a call on iPhone is available in the settings. This function Intended for users with hearing impairments. However, it can help everyone else too. For example, this feature may be useful for users who work in noisy environments and therefore miss calls.

If you have a similar problem, then this article should help you, here you will learn how to turn on the flash when making a call on your iPhone.

Step #1: Open iPhone settings and go to the "Basic" section.

If you want to turn on the flash on your iPhone, then the first thing you need to do is go to the settings and go to the “General” section.

Step #2: Go to the Accessibility section and turn on the LED flash for alerts.

After you have entered the “Basic” section, open the “Accessibility” subsection and enable the “LED flash for alerts” function there. This function will be located in the “Hearing” settings block.

That's all. Now, when there is an incoming call, your iPhone will not only play a melody and vibrate, but also blink with a flash. It should be noted that the flash display only works when the iPhone is locked. If the device screen is working, the flash will not blink, although in such a situation it is not necessary.

How to turn on the flash when making a call on other smartphones

By the way, you can implement a warning about an incoming call using a flash not only on an iPhone. For example, on an Android smartphone this can be done using Flash applications Alerts 2. This application is completely free and you can download it from .

When you first launch the Flash Alerts 2 app, it will test the flash on your smartphone and ask you to confirm that it is working. If the flash is working, you can set various warnings. For example, in order to set the flash to turn on when there is an incoming call, you need to activate the “Incoming Call” function.

Also, using the Flash Alerts 2 application, you can configure the flash to turn on when you receive an SMS message or notification from other applications.

Many people today dream of an iPhone. The devices that Apple produces are distinguished by their ideal quality, speed and versatility. Today, the iPhone has become not just a means of communication, but also an element of wealth; such a phone gives status to its owner.

Users turn on the flash to show off the originality of the iPhone

The device has a lot of options, one of which is flash. How to turn it on so that the phone blinks when there is a call? Let's look into it in more detail!

Possibilities

If we talk about the LED flash, it appeared for the first time in the iPhone 4. Those who were lucky enough to use older models could get iFlash for an additional fee - an additional flash that worked when connected to a special connector.

IN iPhone models 4, 4s, 5, 6 LED is installed on the back of the product. The main function of the innovation is to enable additional lighting to create high-quality video and photographic materials. In addition to all this, you can turn on the flash when the phone rings or use it as a flashlight.

To activate the flashlight, just press the Home key, select “Control Center”, and then find the button with the flashlight icon in the lower left corner.

Voila! The flash works like a regular flashlight. You can turn it off by waiting a while until the screen locks on its own (you can change the locking time in the settings). Another way to turn off the backlight is to perform the manipulations in the reverse order of turning them on.

Flash on the bell

Do you want your iPhone to blink when you make a call? It's very easy to do. Officially, this option is called an LED flash for warning. When the function is turned on, the owner of the gadget can see the light flickering when there is an incoming call, so sound plays a secondary role. You can set up this feature in three simple steps:

select “General” in the device settings;
Find the "Universal Access" option;
activate the “LED flash” option.

Now, when the alarm goes off or the phone rings, you will be notified not only by your favorite melody, but also by a flickering light around the gadget. As you can see, in order for the iPhone to blink during a call, you need to spend a few seconds. Interestingly, the light pulsation will disappear if you unlock the device. The developers are doing great with usability - there is no need to waste additional battery energy.