Is it possible to change SIM cards in iPhone 5. How to insert a SIM card into iPhone? Features of installation and operation

On the iPhone - the world famous device Apple– all elements are harmoniously adjacent to each other. And the functionality of these devices amazes the imagination of the most sophisticated user. Any phone model from Apple, be it iPhone 3, iPhone 4S, SE, 5C, iPhone 5S, 6S, 7 and many others, each of them is endowed with a wide variety convenient functions, which are improved from version to version.

Despite the ease of use of Apple devices, some users, when they first pick up a device called iPhone 3, iPhone 6, model 5S, 7 or any other, are lost and cannot understand how to insert a SIM card into the device.

In fact, inserting a SIM card is very easy. You just need to know the algorithm of actions and strictly follow it.

The manual below explains in detail how to insert a SIM card into an iPhone 5S. Where to insert the SIM card and other questions are covered in this instruction.

Any device from Apple, not only the 5S smartphone, but also other phone models - iPhone 3, 4, 6, 7, etc. before the start active work need to be prepared. And only after this can you worry about the question of how to insert a SIM card into the iPhone.

So, the first thing you need to do is:

Make sure that your iPhone - be it 3, 4, 5, 7 or any other - is not locked due to a change in carrier. Large quantity gadgets from Apple are blocked to a specific communication company - communication service provider. And if your goal is to switch to another company, you will need to unlock the SIM slot.
If your device (3.4.5, etc.) is not locked, everything is fine and no preparatory procedures are required. You can insert a SIM card into your iPhone without any problems.

How to insert a SIM into iPhone 5

Now let’s look at the main question - how to insert a card into an iPhone 5. By the way, the information that will be given below will also be useful for those who do not know how to insert a SIM card into an iPhone 4.

In addition, the instructions will answer the question of how to remove a SIM card from an iPhone. To do this, you just need to change the order of actions and perform all the steps in reverse order.

Now let’s take a step-by-step look at how to correctly insert an operator card mobile communications in iPhone 5. This simple process involves the following user actions:

The device must be turned off before opening the slot. To do this, you need to press and do not release the power button of the smartphone for some time (several seconds). When an inscription appears on the display calling you to turn off the device, you need to slide your finger over the button and the device will immediately turn off.
After turning off the device, you need to place the thinnest end of a special spatula into the slot and remove the card tray with a pressing motion. There will be a recess for the SIM card where you need to insert it.
Insert the card so that the golden contacts are directly at the bottom.
Push the tray back in.
Check the side of the phone to make sure the tray goes in all the way.

Reference. In recent years, SIM cards have begun to be produced in slightly different formats than before. Now they come in much smaller sizes. This causes some difficulties, since older versions of iPhones are not designed for SIM cards of the new format - and vice versa.

Also note that all Apple phones have a SIM slot into which you can insert and, if necessary, remove a card from a particular operator. The inserted element is retrieved without problems. In some models, you can remove the SIM card using a special device that comes with the device. For most versions of gadgets, the SIM card slot is located on the side of the case and on its right side. Only in older models - version 3 - the card slot is located at the top, at the border where the front and rear parts housings. However, pulling out a card in all devices, as well as inserting it into a slot, is not difficult.

After all the steps described above, if you do everything correctly, when you turn on your iPhone for the first time, the device will connect to the network automatically. Now you can enjoy exploring the functions of the new gadget and try them out in action, as well as make calls and send messages to friends and acquaintances.

If you need to change the SIM card, you should remove it in the reverse order, i.e. perform all actions specified in the instructions, starting from the 5th.

Articles and Lifehacks

This device differs from its predecessors primarily in that it will not be possible to install a regular SIM card into it. In this regard, many are increasingly interested in instructions for replacing a SIM card on an iPhone 4. This is much simpler than, as, indeed, any other.

It is worth noting that the smartphone already supports the micro-sim format. The slot that was previously at the top mobile device, is now on the side.

Where to start? Let's try to figure out how to turn a regular SIM card into a micro-sim.

Instructions for preparing a regular SIM card for replacement with an iPhone 4

The format of a regular SIM card differs from micro-sim in its size. If the traditional card had dimensions of 25x15 millimeters, then for the iPhone 4 the dimensions are 12x15 millimeters. However, the principle of their operation is no different, and therefore old SIM card Can be cut to suitable sizes.

There are several ways to make a micro-sim from a regular SIM card. It is best to use a special cutting device for this, which allows you to do everything with maximum precision. As a rule, it is made of stainless steel, and is offered at a very reasonable cost.

If iPhone owner 4 there is no such device, he can try to trim his SIM card manually. It is better to use special patterns for this, since there is a high probability that the SIM card will ultimately be incorrectly prepared and will not be able to work on a smartphone.

So, we are guided by the parameters mentioned above: 12x15 millimeters, suitable for micro-sim. You can use available tools - a ruler, a pencil and ordinary scissors.

Many users are interested in the question of whether it will be possible to use micro-sim for regular phones. There is a special adapter that will allow you to install it in your usual mobile devices.

Brief instructions for replacing a finished SIM card on an iPhone 4

So, micro-sim is ready, and now you need to install it. To do this, use a special paper clip. Standard equipment iPhone 4 includes this tool. But in any case, you won't have to.

Our instructions for replacing a SIM card on an iPhone 4 move smoothly to the moment of its installation. As already mentioned, the slot can be found on the side. Carefully pry it off using a paper clip, inserting it into a small hole.

Place the micro-sim in a special slot and push it back into the device. After that in top corner The smartphone display should display the logo mobile operator, as well as the signal level. This means that the SIM card has been cut and installed correctly, and the iPhone 4 is now ready to use.

If the signal level is still not displayed, you can try going into the device settings and find the “Operator” menu there. Next, check the “Automatic” box.

Before removing the SIM card, you should turn off the device.

Finally, the treasured white box with the long-awaited iPhone 6 is in your hands. All that's left to do is set it up and use it for your own pleasure. It is clear that first of all you need to insert a SIM card.

What card is in the “sixes”?

You ask, “What kind of SIM card should be in the iPhone 6?” In the "sixes", just like in their predecessor - the iPhone 5 series, instead of regular card— nano-sim is used, developed with the support of Apple and launched in 2012. They differ, first of all, in size - nano is much more compact and thinner than the standard one. It has parameters of 12.3 × 8.8 × 0.67 mm. In all other respects, the principles of their operation are identical, there are simply no plastic rims around the metal carrier with the chip, and the security parameters are slightly improved.

It is best, of course, to insert into iPhone original nano-sim, it looks like this.

Trimming

The cost of replacing a standard SIM card with a nano, in the same MTS, for example, costs a lot - 24,300 rubles.

Therefore, many people prefer to cut it to the desired format themselves. This will take literally a few minutes, and does not require any special skills or equipment - the entire procedure is performed with ordinary kitchen scissors.

This is what the “modifications” look like, which you can do on your own - just trim the edges. For “sixes” the one on the far right is suitable.

Many service companies They offer to quickly and efficiently “adjust the nano-size” to the sixth iPhone for little money.

If you decide to cut it yourself, do not forget to first mark the characteristic beveled corner - you can put a dot on the reverse plastic side with a marker. We also recommend making something like a pattern - for the nano-sim parameters indicated above. This will make cutting it out much easier and less likely to make a mistake.

But here is an original solution from K. Ropp, which helps to quickly cope with the task.

Just choose right size and make markings along the intersection lines. The fit is almost perfect this way. And the possibility of damage important elements chip is reduced to a minimum.

It’s better to cut with a small allowance, and then sand off any excess with sandpaper. Even if you go a little onto the metal surface, it’s okay. Usually the chip is placed in the center and will not be damaged.

After trimming and grinding the ends, remove a little thickness from the reverse plastic socket, since the factory SIM card, and therefore the slot for it in the iPhone, is 0.09 mm thinner - that’s what needs to be removed. If you do not do this, you will then not be able to open the port and remove the stuck card. We recommend inserting it into the tray from time to time and adjusting it so that it does not protrude above its metal side, and it can then be pulled out. After that, thoroughly wipe it from dust and that’s it - the nano-sim can be used.

How to install it?

So, the card is ready - all that remains is to install it. Schematically, you can remove the nano-socket like this.

In order to open the receiving tray you will need a special needle included in the kit.

With its help, you can safely remove the tray from the iPhone into which you need to insert a SIM card. However, many do not find it in the package, but it is there, it’s just not immediately visible.

All you need to do is take out the instructions and pull them out of the paper holder in the center.

So, in order to open the nano-card tray, you need to insert a pin into the hole located on the side, on the right side of the iPhone display, and press firmly.

After a slight click, the outer plug will move slightly away from the body and can be easily removed.

If the original iPhone needle is lost, the same thing can be done using a regular paperclip (needles with sharp edges cannot be used).

Recommendations

Regarding the SIM card, there are several important points.

2.If you plan to trim an existing one yourself, follow the manipulations we described. It must “sit” tightly in the tray, otherwise, at a minimum, you will have problems with communication, and in the worst case, the port will be damaged.

3. Very carefully go around the places with metal contacts, do not forget to “scrape off” the excess thickness only on the side where the plastic is. Walking on metal will probably ruin your SIM card.

4. Please be aware that older cards may no longer work after being trimmed.

Last time, we looked in detail at how to clear memory on an iPhone using and without iTunes, and wrote a short instruction that you can read. Currently, it is difficult to imagine a phone working without a SIM card. All iPhones and most iPads are designed for communication between users, friends, colleagues and people close to us. Communication is possible both via the Internet and through the network of a mobile operator using a SIM card. How to insert a SIM card into iPhone 7? Read on.

A SIM card is an intermediary that provides the telecom operator with information about your device, access to it voice communication and data transfer. Full time job devices is impossible without a SIM card. So, in this article we will deal with the seemingly simple question of how to insert a SIM card into the iPhone 6 and most other iPhone models. First, let's look at what SIM type required for normal operation of the device.

According to official information from the Apple website, the iPhone uses following types SIM cards shown in the image. Therefore, be careful and check with the telecom service operator’s consultant or insert the SIM directly at the communication salon, in the presence of an experienced assistant.

How to remove a SIM card from an iPhone 5s

All we need is to find out where the SIM card tray is located on the smartphone itself and a tool to remove the SIM card from the gadget.

The main difficulty that may arise on your way to remove the SIM card is the availability of a tool, but this is not a problem. Let's make do with improvised means.

To begin with, if you still have a paperclip that came with the device, we recommend using it. Remove the case from your smartphone and find the SIM card tray. As a rule, it distinctive feature is the presence of a hole in the housing on the side of the device. Insert an original Apple paper clip into the hole and press with enough force to allow the tray with the SIM card to slide out of the grooves.

After removing the tray with the SIM card from the device, the message SIM card is not active will appear on the smartphone. We advise you to turn off your smartphone before inserting or removing a SIM card.

How to get a SIM card out of an iPhone 5 if you don’t have the original paperclip?

Probably everyone has toothpicks at home. Many people use toothpicks after meals, but not everyone thought that they could be used as one of the improvised means for removing a SIM card from an iPhone.

ATTENTION! WE ARE NOT RESPONSIBLE FOR ALL ACTIONS YOU CARRY OUT WITH YOUR SMARTPHONE TO REMOVE THE SIM CARD.

As a rule, a standard toothpick will not fit into the hole in the iPhone SIM card tray. To remove the SIM from the iPhone using a toothpick, you should sharpen its edges a little (make it narrower). Try to trim just a little on both edges. If you make it too thin, the toothpick will break when you remove the SIM card, be careful.

How to remove a SIM card from an iPhone 4

Most safe way, which will allow you to remove the SIM card from the iPhone 4, without using the original key - use a paper clip. Surely many people have a very ordinary paper clip lying around. Bend it or straighten the long end as shown in the image and insert it into the SIM card tray of the iPhone 4.

Where are the SIM slots located on others? iPhone versions?

Almost every iPhone comes with a SIM card tray. The only exception was the iPhone 4 variety with CDMA networks. Therefore, if you have an iPhone 4S or newer, then you will definitely find a SIM card compartment on your smartphone. We will describe in words where the slot is located and on which models:

iPhone 3G3GS: on the top between the headphone jack;

iPhone 4-4S and later: On the right side of the case, which is opposite the side with the volume buttons.

Every time you replace a SIM card, you should make sure that you install it in the tray in the correct orientation, so be extremely careful. Our instructions will also help those users who ask the question “How to insert a SIM card into iPhone 7.”

Reliable screen protection for iPhone - with full 3D coverage. Manufacturer, company Benks.

Details Created: March 12, 2017 Updated: October 29, 2017

To figure out how to insert a SIM card into an iPhone, you don’t need to have any serious skills. However, for beginners who first picked up apple smartphone, you'll have to rack your brains a little. In this article I will tell you how to insert a SIM card into any iPhone.

Location of the SIM card slot iniPhone

IN different models iPhone, the SIM card slot is located absolutely in different places. In the first versions of the smartphone (2g,3g,3gs) it is located at the top of the case near Power buttons. In iPhone 4/4s and 5/5s it moved to the right sidebar smartphone, where there are no speaker volume control buttons.

Location of the SIM card tray in iPhone 4/4S and 3/3GS

Finding the SIM card slot is very easy, you just need to look a little closer at the surface iPhone cases and you will immediately see a small hole the size of a simple paper clip

Tray location in iPhone 5/5S

This hole is a lock that opens the SIM card tray if you press it with a special key (usually supplied in the box with the iPhone, any version). By the way, you can open the lock with a simple paperclip or other sharp object.

Tray location in iPhone6/6 Plus

Selecting the desired SIM card format for iPhone

By pressing the lock with a key or a paper clip, the SIM card tray will come out. Where will you need to insert your SIM card.

It is also important to have an idea of the size of SIM cards - the fact is that their usual size is not always suitable for Apple devices.

It is important to know which SIM card you need. The fact is that older versions of the iPhone used SIM cards of different formats.

For iPhone 2g/s and 3g/s you need a regular SIM card measuring 25 x 15 mm.
iPhone 4g/s already asks for a SIM card in Micro SIM format, the size of which is 15 X 12 mm.
iPhone 5/5s and 6/6 Plus and older already use the new format Nano SIM, the size of which is only 12.3 X 8.8 mm.

Some craftsmen manage to cut a regular SIM card to Micro size, but this is a very risky endeavor and hardly everyone can do it. Therefore, I advise you to just go to the salon cellular communications your operator and change your old SIM card to the one you need.

How to insert a SIM card into an iPhone

After you have a SIM card required format, you can start installing it on your iPhone. To avoid mistakes and do everything right, make sure that you put the SIM card in the tray with the gold side down (the iPhone itself should be face up).

Having fixed the SIM card in the groove of the tray, carefully insert it back.

In order to make sure correct installation cards, turn on your smartphone (if you turned it off) and check the connection. Interesting feature iPhones are able to insert and remove a SIM card “hot”, without turning off the phone. To check whether you inserted the SIM card correctly, simply turn on the smartphone and make sure that the iPhone sees the SIM card. I would like to note that the iPhone allows you to remove and insert a SIM card while it is on.