Description of the “Call me back” service from Yota. All useful numbers and commands for the Yota operator

Sometimes Yota subscribers need to quickly check very important information. This may concern their tariff plan, remaining minutes or traffic. But these useful commands hide a lot additional functions that you didn't even suspect.

To do this, you have to use several commands in the USSD standard. Everyone practices this mobile operators to solve numerous problems of their mobile subscribers. Yota did not stand aside either.

After all, you often have to find out not only about the amount of the remainder of the package, but also about many significantly important problems.

What USSD commands does Yota have?

The most requested feature is quick check cash balance in the account.

Check balance

In order to quickly find out the amount in your balance Personal account you need to dial – * 100 #

Remaining minutes

If the task is to check the number of minutes remaining for a conversation, dial - * 101 #

Remaining traffic

You need to check how many GB of Internet traffic is left on your tariff, then just dial – * 101 #

My number

Not everyone is always able to quickly remember their number – * 103 #

Call me

Useful service from Yota company allows you to send an SMS to your subscriber with a request to call you back. You can send up to 5 such SMS beacons per day - * 144 * 89XXXXXXXXXX #

Call waiting and holding

Put a call on hold

– * 43 #

Shutdown

services – # 43 #

Check status

hold services can be dialed – * # 43 #

SMS

Blacklist

enable – * 903 #

The following menu will appear on the screen:
“SMS control” service
Blocking a number
Blacklist

To block unwanted mailings, send “1”. The screen will display a list of numbers from which you received the newsletter. Send serial number sender to add him to the “black list” and block receiving mailings from this number.

To view the “black list” of blocked senders, select “2” in the main menu. If you want to resume mailing, send the serial number of the sender from the list.

To obtain information about the service, select “3” in the main menu

Communication with technical support

– call number 0999

Complex redirection

If you are very busy or you need to configure that the calling subscriber automatically calls back to another number (specified by you), then you need to enter the following commands -

Forward immediately

(no waiting) – * * 21 * +7XXXXXXXXXX #
After 30 sec. – **61*+7XXXXXXXXXX #

Delayed response

at 5,10,15,20,25,30 seconds (instead of @-insert right time delays) – * * 61 * +7XXXXXXXXXX # @ #

If not available

– * * 62 * +7XXXXXXXXXX #

If busy

– * * 67 * +7XXXXXXXXXX #

Off redirection

(all previously selected) – # # 002 #

Tariff change

100 minutes

– * 105 * 100 #

300 minutes

– * 105 * 300 #

600 minutes

– * 105 * 600 #

900 minutes

– * 105 * 900 #

1200 minutes

– * 105 * 1200 #

Connecting and changing old service packages

(for clients connected before 01/25/2017)

* 105 * N#, where N is the size of the package of minutes for unlimited tariffs;

Connecting and changing a new service package

for new tariffs
* 106 # – call the connection conditions menu. In it, select the minutes, gigabytes and unlimited applications you need.

Add options

Add additional 100 minutes to the current one tariff package - * 602 #

Connect to the “Unlimited SMS” service for 50 rubles to the current tariff package - * 603 #

Activate the “Unlimited” option mobile applications» for 100 rubles - * 604 #

We include an additional 5GB traffic package - * 605 #

Correct connection – unlimited social networks

VKontakte – * 111 * 1 #
Facebook (including Facebook messenger) – * 111 * 2 #
Whatsapp – * 111 * 3 #
Viber – * 111 * 4 #
Skype – * 111 * 5 #
(Disconnected!!!-Telegram) – * 111 * 6 #
Odnoklassniki – * 111 * 7 #
Instagram – *111*8#
Twitter – *111*9#
YouTube – *111*10#
Music – * 111 * 11 # (unlimited listening to tracks in Apple.Music,Zvooq,Yandex.Music,Google Play Music,SoundCloud.)

Mobile Internet in roaming

Special conditions –

* 131 # one-time activation of the service,

* 132 # switch on for an unlimited time.

Find out the balance of Volume 1 and Volume 2 packages by dialing * 133 #

“Free Inbox” option

Activation of the “Free Inbox” option (30 minutes per day (does not transfer). Validity period: 30 days). Turn on – * 135 #

Payment for parking

A convenient way to pay for a paid parking space from your mobile phone
Attention. Payment is currently only available to residents of Moscow to pay for the services of the Moscow Parking company.
Send SMS to number 7757 * * parking number * car number* number of hours from 1 to 24(example: 1205 * С001СС177 * 1);
Extend parking time - send text XNumber of hours (example: extend by 3 hours - X3);
To leave the parking lot early - send text S or C;

Check paid services

To check all connected paid services on Yota you will have to go to . Yes, you heard right, short USSD commands, or a similar way to check the uncontrolled consumption of your cash,No.

YOTA is primarily aimed at users who need Internet access, so mobile teams This operator's options are not as diverse as those of other operators. However, some convenient and popular services were adopted, among which you can find information on how to send “Call me back” from IOTA. The principle of operation of this request is approximately the same for all operators.

Option Description

You can send a beggar to IOTA no more than once a day. Exactly at 00:00 the counter is reset to zero, so the countdown begins again. This service is used by customers with a low balance to avoid spending extra funds from the account, especially if it is not possible to top up the SIM card in the near future.

IOTA subscribers can send a beacon to a subscriber of any other operator:

Megaphone;
Beeline;
And also to many other small regional communication providers.

Being in roaming will not be a problem, because incoming calls for subscribers of this mobile operator outside the home region are also not charged. The “Call me back” request is sent as a USSD code. After a request is sent from the IOTA phone, the selected subscriber will receive an SMS with the text “Please call me back.” Also as additional information The date the request was sent and the phone number of the person who sent the beggar will be indicated. As confirmation of a successfully completed operation and delivery of the request, a notification in the form of SMS will be sent to IOTA’s number. The decision whether to call the sender of the request back or not is at the discretion of the recipient.

How to send a beggar

There is only one way to send a “Call me” request. He repeats similar requests from other operators. You need to dial the following combination:

*144*subscriber number#.

The number of the subscriber to whom the beacon will be sent is recorded in international format, starting from 8. YOTA usually cannot recognize other versions of the set. The service does not require additional activation, as it is a standard option for ETA subscribers. No also subscription fee for using the service or sending requests.

On YOTA there are no longer opportunities with a zero balance, however, often after purchasing a card, users receive voice message about the possibility of taking the “Promised Payment”. Mobile operator does not support such a service, so if there was an alert, it means that the SIM card did not recognize the YOTA network and connected to the Megafon network. In such situations, it is necessary to urgently contact technical support IOTA to solve the problem of correct activation or replacement of a SIM card.

Yota does not support many other USSD commands that help you make a call at the subscriber’s expense or ask to top up your account. Full list codes can be found on the official website, their number is very small and mainly relates to checking the balance, remaining minutes, setting up forwarding and connection additional packages. The ability to send a request for a call back is the only service retained for ease of communication, however, most users rarely face the need to constantly use the service, and it is impossible to go negative on IOTA.

Many Iota users have a situation when the phone balance has reached the limit of funds and there is no way to make a call. For such cases, a special command is provided by typing it on your phone and you will send a request to call back. After sending the request, your opponent will receive an SMS notification containing a text asking you to call him back. We will discuss how to do this further.

To send the so-called beggar, Iota subscribers need to dial the command * 144 * XXXXXXXXXX #. Now it remains to explain what this code is. The first 3 digits of 144 are the country code, next three XXX is the operator code following the * sign, and the remaining 7 digits XXXXXXX are the number itself Yota subscriber to whom you are sending a request to call back.

Using this combination you can send callback requests to everyone Russian operators, including regional ones.

Call me Yota - restrictions

After you use the call me service from Yota, you will receive a notification in a reply SMS message. Contents: The subscriber to whom you sent the request received a notification from you. Then all you have to do is wait until they call you back. It will not be possible to resend requests indefinitely, as there are restrictions on using the service. You can send no more than five requests per day. After you exhaust the limit, the option will become available again after 00:00 Moscow time.

It will help you to monitor your account balance on your smartphone.

Yota is a relatively young cellular operator operating throughout the entire post-Soviet space. Despite this, the popularity and demand for the company’s services is not questioned. Every year the operator does not lose its clients, simultaneously gaining more and more new ones. This state of affairs is explained advantageous offers from Iota for subscribers and excellent service in providing them.

Today our resource would like to highlight a fairly popular free service company - sending a beacon. Read below about the essence of this option, the rules and features of its use. So - how to send a beacon from Iota? Let's figure it out.

A few words about the essence of beacons

With the advent of cellular communications, people received not only the opportunity for constant and problem-free communication with their friends, comrades or colleagues, but also many applied problems. Perhaps one of the main and most common difficulties in using operator services is resetting the balance. Money is not endless and everyone runs out. This usually happens at the most inopportune moment.

If previously, to top up your balance, you had to look for the nearest payment machine or buy special card, then today everything has become much simpler. Options for resetting personal account and the need to conduct a call set. Some Yota subscribers take the promised payment, others top up their balance with bank card, and the third - use the sending of beacons with a request to call back or top up their account. What are they?

In fact, there is nothing complicated about beacons. With Yota, like with other operators, they are free SMS alerts for the subscriber’s friends about his difficult situation. Often the beacons sent to Iota clients contain a standard request to call back, but some go further. So, quite popular beacon messages are:

request to top up your personal account number;
a comic option for notifying the recipient about the subscriber’s problems;
regular free emails with important information.

Naturally, the sending of beacons must be initiated by the Iota client himself, who finds himself in a difficult situation with a lack of money on his balance. Which option for notifying the recipient is better is up to the same subscribers to decide. Since the request to call back is more popular, today we will consider it first. You can read about other types of beacons from Iota on the operator’s official website. The most current and important information for all subscribers of the company.

Important! The service for sending beacons always works - its provision is never stopped by the operator. Despite not advertising the presence of the option and its features, notifications are available to everyone at all times.

Conditions for the beacon option

Iota’s beacons appeared a long time ago - in the first years of the operator’s activity. The name of the service was borrowed from the Tele2 company, which provides its subscribers with the opportunity to send “beacon” alerts to all subscribers without significant restrictions. As for Iota, this operator also does not infringe on its clients in any way regarding sending beacons. The option conditions are:

Users - all subscribers, regardless of the tariff they use, the duration of cooperation with operators and the availability of money in their personal account.
The text of the messages is at the user's choice (templates are often sent from Iota, such as a request to call back or top up the balance).
The possible number of beacons sent is 5 per day.
Cost - 0 rubles (the service is completely free).

Since Iota has plenty of types of “beacon” alerts, you should familiarize yourself with them on the company’s official website. It is important to understand that each beacon sends differently and has a number of features. If only because one notification may contain a request to call back, and another may contain a joke about the subscriber’s difficult situation.

Note! You can send a message with a request to call back or top up your account not only from Iota’s number to a subscriber’s number of the same company, but also to SIM cards of other operators. You shouldn't forget about this.

Learning to send beacons

You can read about sending all types of beacons on the operator’s official website, which has been mentioned more than once. Now let’s look at the notification asking you to call Iota back. To send it, just use the following command:

* 144 * recipient number without the number “8” #

Sending a beacon with a request to call back, as with any other, is carried out instantly. As a result, the recipient will receive a corresponding message, which he will either take into account or ignore. The sender is always notified of the receipt of a beacon from his side, which is also important to note. Whether the person will call him back or not, only time will tell.

In principle, there is nothing more to say about using the “beacon” option from Iota. The main thing is to remember:

the service is completely free;
it has limits of 5 alerts per day;
It is important only to send each beacon thoughtfully, since simply bothering other people with the same request to call back is wrong.

This concludes the most important points on the topic of today’s article. As you can see, understanding the essence and sending beacons on Iota is not difficult. Realization of all necessary procedures comes down to a set simple USSD command. We hope that the presented material helped all readers of our resource figure out how to send a request to call back on Iota. Good luck and hassle-free use of cellular services!

Lack of funds on balance mobile phone akin to a tragedy - you cannot call friends, relatives or colleagues, send SMS or simply go online. And if there is no place to top up your account, then the problem only gets worse. In such situations, subscribers are saved by special services from mobile operators. In this review, we will look at how to send a beacon from Iota if the balance has reached zero.

To send a beacon from Yota, dial

USSD command *144*XXXXXXXXXX#. The number is indicated in ten-digit format.

What is the name of the service

There were times when there were no beacons. And there was no operator Yota (Eta). When the account ran out of money, subscribers were unable to make calls. The only solution was not to lower the balance to complete zero– in this case, you could call and immediately hang up the call. Then the called party could understand that someone was waiting for his call. Subsequently, cellular operators offered a more civilized solution.

The “Call Me” service from Iota, which allows you to send a beacon, became the very solution. The subscriber dials a special request, and the called party receives the request. The word “beacon” was borrowed from Tele2, which operated a similar service with the same name. The convenient word was snapped up by subscribers of other social networks and firmly entered into everyday life.

When planning to send a beacon from Yota to Tele2 or to the numbers of any other operators, subscribers call this action with a variety of phrases:

Sending “call me back” is a completely harmless option;
Throwing off a beggar is a funny, rarely used option;
Throwing a beacon is for the most persistent people;
Sending a freebie is another not the most common option.

You can even send a homeless person from Iota - a mocking joke about people who never have money to call.

You can also throw a beacon, send it, send it, and perform any other actions with it. That is, you can call the process of sending a request to call back whatever you like.

By sending a beacon, the subscriber seems to be telling his potential interlocutor - I don’t have money, I’m waiting for a call. The recipient can only decide whether to call back or not. You should call back only to familiar numbers, let the rest somehow find the money for the call themselves - cellular communication cheap now.

“Call me” service from Yota

Operator Yota never advertises his additional services. It seems that they simply do not exist. Nevertheless, you can still send a request to Yota to call back, and it’s absolutely free. This opportunity provided as part of the “Call Me” service. It does not require a subscription fee or a separate fee for sending requests. You can send a beacon with any balance – negative, zero or positive.

In order to send a beacon from Yota to another number, you need to send the USSD command *144*XXXXXXXXXX#. The number is indicated in ten-digit format, for example, *144*9161234567#. After a few seconds, the specified number will receive a request that this person waiting for a call without being able to call himself.

The service requires certain limits. The thing is that some people have a manic need to send beacons to other users - they always have zero balance, because they talk a lot, but don’t have their own money. As a result, cases of abuse of this opportunity were recorded - recipients simply languished from constant requests. Therefore, it was decided to limit the number of beacons - Yota sets a limit of five requests per day. It is impossible to increase the limit or bypass this limitation in any way.

Not only Yota, but also other operators have similar limits on beacons - this is a common practice.