Photoshop how to change color. Four Ways to Change Layer Color in Adobe Photoshop

Actually exists many ways to change the color of an object in Photoshop. Previously, we already looked at how to do this using, and also learned how to change hair color in Photoshop using.

These are not all methods, today I will show two very simple ones, and in future articles I will talk about a couple more methods using other adjustment layers.

Method No. 1

I'll tell you briefly about the application this method. Open the image and create new layer(I remind you of all the techniques).

Then change the blending mode of this layer by selecting Hue from the drop-down list at the top of the Layers palette (located at the bottom of the list).

After that, select by pressing the B key, click on the foreground color indicator, in the palette dialog box that appears, select a shade and click on the OK button. Having previously selected a new layer, draw on top of the object.

If you paint over the excess, you can temporarily select the Eraser tool by pressing and holding the E key. You can prevent such situations in advance by adding a layer mask to the new layer and hiding the areas that do not need to be changed with black.

Note

If the area to be repainted is surrounded by black, white and gray flowers, you can safely paint over the latter, and they will not change at all. This is because in the Hue blend mode, areas filled with color only affect those areas of the underlying layer that already contain color.

Method No. 2

Remember the menu command? Similar menu command Replace color can be used to highlight one shade and replace it with another. This command works very well if the color that needs to be replaced is more or less uniform and concentrated in a certain area, like the car body in the picture above.

Selecting the command from the menu Image - Correction - Replace Color, you will see a dialog box of the same name.

It already has the Eyedropper tool selected, so click on the shade in the image that you want to replace. It will appear in a square with the inscription Color in the control group Selection at the top of the dialog box.

In the control group Replacement at the bottom of the dialog box, click on the square located above the inscription Result to select a new shade. When you click the OK button. If you need to adjust the selected shade, you can use the sliders Color tone, Saturation And Brightness(also found in the Selection control group). Here's what happened:

Please note that in addition to the ordinary pipette, there are pipettes with small “+” (plus) and “-” (minus) icons nearby. Use them to expand/narrow the range of shades that need to be changed.

As you can see, I overdid it a little and my car wheels also turned purple. This suggests that this method may not always be useful.

If you notice an error in the text, select it and press Ctrl + Enter. Thank you!

It often happens like this: found the desired picture, but the color is not the same; or just wanted to diversify the usual. How to replace a color in Photoshop with another? The question is justified, because in Photoshop you can replace color in several ways. Much depends on the dispersion of a certain shade throughout the image. The less often the color being replaced appears in other parts of the image, the easier it is to replace the color in Photoshop.

Now let's look at several methods and figure out how to replace one color with another in Photoshop.

The first method is the easiest and fastest. But the object of repainting should not be too complex. For example, let's take a photo of a lime on a table. The background is almost uniform, green present only on lime. The fruit is round, it won’t be difficult to recolor it.

Open the image in Photoshop and unfreeze the layer by right-clicking on the castle image.

Create a new one above the photo layer transparent layer (Shift+Ctrl+N). Calling the tool "Brush"(key B). It is better to use a hard brush. On the control panel, call up the brush properties and select a hard one, with clear edges of the stroke.

Select the color of the brush that you want to repaint the lime with. Let's take blue for example. The palette is in the toolbar at the bottom. Called double click by icon. By moving the sliders on the spectrum, you can select a color range. We select the color tone by moving the white ring in the square window, where the tone changes from white to black.

Stand on the transparent layer, select the brush size using the keys Kommersant- increase, or X- reduce and paint over our lime.

Now let's change the layer blending mode from “Normal”/Normal on Hue. You can do this in the layers palette. This will cause the lime to change color.

If you hold down the key Ctrl and, moving the cursor to the layer icon, click once, the shading area will be highlighted. Now, without removing the selection, you can change the brush color and select other colors. There is no need to repaint. After selecting a color, you can press the key combination Alt+Delete. This will fill the selected area with a new color.

In the next example, we'll look at how to replace a color in Photoshop with better quality. This method may take a little longer, but the results are worth it.

How to replace one color with another in Photoshop if shades of the color being changed are often found in the photo

Let's say you need to change the color of a model's lips. Red, pink and shades of these colors are present in skin color. When changing the color of your lips, you need to leave your skin color unchanged.

Open the image in Photoshop. Create an adjustment layer. The list of adjustment layers can be expanded in the layers palette below.

In the adjustment layer settings window, select the “Red” color channel and click on the tool Eyedropper Tool, then make one click on the model’s lips. This way we will determine the color that we will change.

Movable brackets will appear at the bottom of the gradient. With their help, you can make the range of a given color wider or narrower. When moving the checker "Color tone" /Hue The chosen lip shade will change throughout the spectrum, depending on where you point the checker. In this case, the shade of red will change throughout the image.

Ctrl+I

Having selected the color you want to change, close the adjustment layer editing window and step on the adjustment layer mask ( white square) and press the keys Ctrl+I. The mask will be inverted to black, and all our changes will be visually lost.

When all the areas where the color needed to be changed have been worked out, you can save the image (keyboard shortcut Shift+Ctrl+S). If you miss in some area, you can cancel the action Alt+Ctrl+Z or paint over all the mistakes on the adjustment layer mask with a black brush. This method will help you choose a new color more accurately, and the work will look neater.

You can learn even more about Photoshop in the course at Fotoshkola.net.

How to replace one color with another in Photoshop if the original color is black or white

Affairs with the change of black and white things are different.

To change the black color, you can apply an adjustment layer “Hue/Saturation”/Hue/Saturation, but work not with the color channel, but with toning. To do this, you need to check the box in the layer settings "Toning"/Colorize.

Let's take a closer look. Let's say you need to repaint a black sofa. Select the sofa using the tool (call with the key W).

Using combinations Ctrl+C And Ctrl+V transfer the selected area to a transparent layer and apply an adjustment layer to it “Hue/Saturation”/Hue/Saturation. To do this, between the adjustment layer and the layer with the selected object, you need to left-click while holding down the key Alt.

Now double-click on the adjustment layer to call up its settings, check the box "Toning"/Colorize and by moving the hue, saturation and brightness checkers, we select the desired color.

It turns out simple, beautiful, without a catch.

To repaint white, you can use an adjustment layer "Color" in blend mode "Multiply".

Open the image and create an adjustment layer "Color". We immediately set the color of the layer to the one we plan to paint white.

Change the blending mode to "Multiply", step on the adjustment layer mask and click Ctrl+I.

Go to the layer with the image and select the desired areas of white with the tool "Quick selection"(call with key W). Without removing the selection, stand on the adjustment layer mask and paint over the mask with a large white brush. The color will change only where you selected with the tool "Quick selection", which can be determined by the dotted line.

If desired, you can change the color of the adjustment layer. To do this, double-click on it and select any new color in the spectrum.

It's that simple. Try it, experiment. You will definitely succeed. Now you know several ways to replace a color with another in Photoshop.

You can learn even more about Photoshop in the course at Fotoshkola.net.

Hello again, my dear readers. Today I would like to tell you how to replace a color in Photoshop with another one by separate area and even throughout the whole picture. After all, you probably have often had the desire to repaint something just to see how it would look. But in order not to make a mistake, it is better to first do this on some kind of layout or photograph. Then you will already know how and what it looks like. Let's see how to change the color of an object to a specific one using the example of repainting the car in the picture.

First way. Color replacement

Let's look at the simplest case, when our background is completely different from the object itself, i.e. cars.

1. So, upload a photo, picture or drawing into our editor and now go to the familiar “Image” menu. Next, select “Correction”, and then “Replace Color”.
   
2. A color replacement window opened in front of us. What are we doing here? First, let's make sure that the active tool in this window is a regular eyedropper (without signs). Now just left-click somewhere on the hood of the car.
   
3. As you can see, we have a small drawing in the window. What is colored light shows us which area will undergo a color change. Now start dragging the Hue slider. Do you see? Some of the color starts to change as you move that tone. Don't be upset that not the whole car is painted over. We'll fix it.
   
4. To begin, press and hold left button mouse on the Scatter slider and drag it to big side. Just try to make sure that the car is painted over as much as possible, while the background remains untouched. IN in this case There are no yellow tints in the background, which allows me to set the maximum spread to 200.
   
5. Has the desired object changed almost all its color, but not completely? Again, no problem. Activate the internal tool “Pipette+” and left-click on those areas of the car where there are unpainted areas in the drawing.
   
6. Voila!) As you can see, everything worked out and even our background was not damaged. And by the way, you can also move the “Hue”, “Saturation”, “Brightness” sliders to achieve the desired shade.
   

Look. It looks like it should be. And this function can be used in different areas, for example, to replace the color of clothes, or to give an unusual but specific shade to vegetables or fruits. In! Try making a blue watermelon. I assure you. It's easy, very interesting and useful for consolidation.

Correcting Misunderstandings

Let's look at a slightly more complicated case. Let’s say I again want to change the color of the car, but this time it’s different. As you can see, the color of the car is the same as in the background. Well then? Let's do everything the same as above and see what we get.

But we’re doing a bad job, the background is so similar to the color of the car that neither the “Pipette-” nor reducing the spread helps. If we want ours to be purple, then our mountains will also be similar. What to do?

In such difficult situations, you will have to do a little manual work. There's really nothing wrong with this. You'll just have to use the one you know. Yes, yes. Using pens we erase failed painted objects or background, thereby leaving with a certain color only the object itself, i.e. in our case a car.

Even better, before you start changing the color, duplicate the layer and perform all the actions on the created copy. And unnecessary details can be erased with regular . This will be better if you suddenly want to change the color later.

Second way. Blend Mode

Well, since we’re talking about repainting a car in Photoshop, I can’t help but mention another good way to carry out this action. True, here you will also have to work with your hands, since you will have to change and paint over everything. But we can easily replace the color in Photoshop with any other.

Let me load the same car as above.

1. Let's take and how we would like to paint this car. Well, let's say I want to see it green, then this specific color I will choose.
2. Now create a new layer by pressing the keyboard shortcut SHIFT+CTRL+N. And then take a look at the Layers panel. Do you see any blending modes there? The default is normal, but open the drop-down list and select “Color” (By the way, the “Color Tone” mode is also suitable, so you can select that too). Great. Well done.
   
3. Now choose the size, shape and hardness of the brush, and go ahead! We paint the car. Just be careful not to touch too much. Well, if you hit it, then use an eraser to correct it, no big deal.
   
4. And now, if you want to change the color that you sculpted, you need to go to our again familiar “Image” menu and select “Correction” there - "Hue/Saturation". But I advise you to immediately use a simple key combination CTRL+U.
   
5. Well, in the newly opened window, you can also move the hue, saturation and brightness sliders to change the hue. It's simple.
   

Well, how do you like the lesson? Was everything clear and interesting? I hope so. Personally, when I learned about changing the color of an item in Adobe Photoshop, was simply delighted. If, of course, something is unclear, you can always clarify or ask. I will be glad to help as much as possible.

I would also advise you to look cool video course on photoshop. The video lessons are simply awesome, the course goes from easy to complex, everything is told in human language, nothing is missed and at the same time there is no unnecessary “water”. Everything is spot on. So be sure to check it out.

Well, I say goodbye to you today. I will be glad to see you in my other articles. Well, in order not to get lost, be sure to subscribe to my blog updates. I won’t spam - everything is just to the point, honestly. Well, you practice. See you in other lessons. Bye bye!

Best regards, Dmitry Kostin.

Everyone knows that in order to change a photograph or picture, you should “go” straight to Photoshop. Given graphic editor capable of working miracles, because in his arsenal there is a huge number of all kinds of tools. All of them are aimed at something for each user.

By the way, in this application You can not only add brightness, contrast, etc., you can generally change the color in it, say, turn a yellow car into a red one. Moreover, this is done very simply, and does not require any skills or specific knowledge at all. Intrigued? In this case, I think the topic of how to change the color of an object in Photoshop will be interesting for you.

Replace color

There are several ways to “work magic” with color in Photoshop, and in this material I will talk about the two most popular ones. The first method uses the Replace Color tool, and here's how it works in practice:

Hue/Saturation

I bring to your attention another way to change colors. After opening the image in the layers palette, click on the small icon at the very bottom in the form of a half-filled circle, and then select “Hue/Saturation”. Next, select the color that will be replaced. Next, use the eyedropper cursor to click on this color. Now move the slider in the “Tone” field until you get the desired shade, do not forget to adjust the brightness and saturation.


Now activate the layer mask. Using a black brush, go over those areas where color replacement is not required. Save the changes and enjoy the result.