Factory reset ZTE BLADE X3. Factory reset on ZTE V9C

Often the technology fails. Most often, the reason lies not in the hardware, but in the device system itself. The reasons for this can be completely different: accidental deletion system files, virus infection or frequently occurring critical errors.

In order not to reflash the phone’s operating system, you can use the so-called Hard Reset or reset to factory settings. After this, all damaged or lost files will be restored.

Each phone is initially built-in software, which makes it possible to roll back user settings to their original form. At the same time, be prepared that all data will be deleted from your ZTE phone: photos, videos, audio, and even contacts (if they are saved in the phone’s memory). The data stored on the SIM card and built-in memory card will remain intact.

So don't forget to do backup information stored on the phone. This can be done either from the device itself or by connecting it to a computer.

Unlike flashing, resetting a ZTE router is absolutely safe and will not be considered software hacking if you suddenly decide to return faulty device under warranty.

There are several ways to reset your phone to factory settings. Depending on what the reason for your decision is: a malfunction of ZTE or as a preventive measure, one or another method may not work. Let's look at the most popular ones.

Android System Recovery

Any ZTE phone running on the Android operating system can be returned to initial settings using universal method. To do this, the device's battery must be charged at least 30%. After this, follow these steps:

1. turn off the power to your device;
2. hold down the following key combination at the same time: on/off, volume up;
3. a screen with the Android icon will appear, a list of available commands, information about your ZTE phone(firmware version);
4. control through the list is carried out using the volume down and up keys, confirm the selection with the power button;
5. Scroll down the list and select “ wipe data/factory reset” - full reset to factory settings;
6. confirm the action, wait for the operation to complete;
7. select the first line from the list " reboot system now".

After this, the phone will reboot and all settings will be reset to factory settings.

Dialing code

If the previous method did not work or the phone does not have recovery for some reason (this could be due to a virus or root installation), then use the following method to reset ZTE to factory settings:

1. remove the SIM card from the device (if you have one);
2. then launch the dialing window and click “emergency call”;
3. enter the following command: *983*987#;
4. After this, the device will ask you for permission to complete removal data (erase everything);
5. confirm your intentions and wait for the operation to complete.

ClockworkMod

For this method availability required third party utility to restore phone data to factory settings - ClockworkMod Recovery. It is distributed absolutely free of charge, and you can download it from the official application store for Android.

According to their own functional features ClockworkMod Recovery is similar to the built-in Android System Recovery, but has a number of advantages. For example, the ability to backup data to an SD card and run the firmware distribution in safe mode.

After installation, it automatically starts the basic recovery software and is launched in the same way: using the volume up keys and turning the phone's power on/off.

Standard System Restore

This method is only suitable if the device is working.

1. go to the settings menu of your android;
2. Scroll through the list and find the line “data reset and recovery”
3. two Hard Reset options will be available here: resetting settings and completely removing all DRM certificates;
4. Here you can also set up data backup; this will require a Google account;
5. after changing the necessary parameters, select full recovery data and wait for the procedure to complete.

As you can see, resetting to factory settings is quite simple on any ZTE phone model. The first method will help most users; for more advanced users, it is recommended to download a special third party application for recovery.

Found a typo? Select the text and press Ctrl + Enter

Although enough time has passed, not everyone can still come to terms with the fact that the previous prices in rubles for equipment will no longer exist, and hundred-dollar smartphones have not only become twice as expensive, this money has become difficult to obtain. Nevertheless, budget segment in our country has greatly increased in popularity. And there is plenty to choose from; the market offers a very wide range of smartphones of various designs, performance, and functionality. True, there are fewer guarantees and longer waits for delivery. However, the ZTE BLADE X3, which we are reviewing, is one of those devices that does not let you down and lasts a long time. The only thing the owner has to do is maintain the system from time to time.

ZTE BLADE X3 hard reset: what is it and why?

Android devices begin to work slower over time, and often this is not due to the degradation of memory or processor components, but to the banal littering of the system with files, remnants of settings and applications, and other things. software garbage. A simple reboot will not fix this; drastic measures are needed - general cleaning or hard reset ZTE BLADE X3. That is, a complete reset to factory settings and clearing the smartphone’s memory.

How to do a hard reset on ZTE BLADE X3

The first reset option is done regular means operating system or a proprietary MiFavor shell from the smartphone manufacturer. It is suitable for cases when the device is turned on without losing the password.

• Go to the smartphone settings section;
• Find the item “Restore, reset”;
• Tap “Reset settings”;
• We agree to the loss of all user data;
• Tap “Reset”, wait for the procedure to complete and automatic reboot device with a clean system.

How to reset ZTE BLADE X3: engineering code

• Open the standard application for calls, enter *983*22387#, press call;
• In the menu that pops up, click Erase Everything;
• After rebooting, the smartphone will receive factory settings, completely rewriting the system.

ZTE BLADE X3 hard reset when you forget the password

It happens that you can’t unlock your smartphone, the password is lost, or the device has become so faulty that it doesn’t even load beyond the logo. In this case, the settings must be reset via engineering menu. To do this:

• Turn off the smartphone (completely, you can remove the battery for a second);
• Press and hold Volume Up and Power until the display turns on;
• In the menu that appears, use the rocker to move to “Clear eMMC”, click on Power;
• The device will begin the reset procedure, then reboot with clean factory settings.
• There is another option, in which the beginning is the same, but only in the loaded menu, we first click on “Factory Mode”.
• In the new section we move to Factory Reset, click Power;
• We agree to the deletion of data “Yes—delete all”;
• Next, we reboot through the line with “reboot system”.

It should be remembered that the reset is accompanied by the deletion of all user data in the smartphone’s memory without exception. Therefore, you need to take care to save everything you need on a flash drive or in the cloud.

Before reset system settings don't forget to save your data located on the tablet (SMS, contacts and other records). After reset, everything user posts are erased from memory along with the settings.

1. Turn off the tablet. The battery must be fully charged. 2. We press two buttons at the same time: power and volume up rocker. You will see a green robot on the display - release the buttons. 3. We are waiting for the Recovery menu to open. If nothing opens, press the power button once, or the home button. 4. Navigate through the menu using the volume rocker. Select an item wipe data/factory reset. To do this, press the power key, which is in this case serves as an OK button. 5. Next question will appear confirm wipe of all user data, we agree by selecting the item Yes - delete all user data. 6. After this, select the item reboot system now, the tablet will reboot and clear itself.

Option 1

Option 2

6. Select Yes--delete all user data by pressing the keys Volume Adjustment and confirm your choice by pressing the button Power

7. Finally, to complete the reset and reboot process, select reboot system now

Option 3

2. Choose Recovery and reset

3. Then click on Reset settings

4. Click Reset and agree to the destruction of personal data
5. The reset process is completed after the phone restarts

Option 4

ZTE Blade GF3 factory reset

• Videos and images for some actions may not exactly match your specific phone model.
• After performing a hard reset, all your personal applications and the data that is in memory will be deleted.
• For a factory reset to be successful, the battery must be charged to about 80%.

Are you looking for a way to make your ZTE faster? Do you want to clear all data on ZTE before selling it to someone else? You need to do ZTE reset to…

How to reset ZTE to factory settings (Hard reset)

Are you looking for a way to make your ZTE faster? Do you want to clear all data on ZTE before selling it to someone else? What you need is a ZTE factory reset. What is this? Factory reset (hard reset) is an operation that erases all data (including settings, apps, calendars, pictures, etc.) on your ZTE Blade and returns to default settings that make your device look like it came straight from manufacturer. When do you need to perform such an operation? When you need your ZTE to run faster when there are some difficulties in the operating system. Here's how to reset ZTE.

Soft factory reset and hard factory reset are two methods you can use to factory reset your ZTE and get your phone back to normal so it will be like new. Perhaps you want to reset your phone's security because you forgot your screen lock password. Or do you want to restore ZTE to factory settings with using hard phone reset. Before rebooting your Zmax 2, I suggest you try a ZTE soft reset first. Wallpapers for ZTE phone free download for Android.

How to soft reset ZTE Blade to factory settings?

Easy way to soft reset ZTE Zmax 2. Follow these steps:

1. Click ZTE main menu.

2. Tap Settings > Privacy.

3. Tap Factory Data Reset.

4. Tap Reset phone. Check, remove the SD card if you want to remove the memory card.

Reset ZTE Blade L4 via Recovery

In this video...

ZTE Blade AF3 - make a Hard Reset (reset to factory settings)

Shown how to do Hard Reset (reset to factory settings) via Recovery on the phone ZTE Blade AF3… information

5. Click Erase Everything.

Wait for a few seconds, your phone will automatically restart and ZTE reset will be completed. If you see that your problem is still not fixed, you can try hard reset ZTE phone.

We do a hard reset of ZTE settings to factory settings

1. Please turn off ZTE.

2. Remove the battery from the phone and wait a few seconds. Then return it.

3. Press the Volume Up and Power button at the same time until it vibrates, then release the Power button, the ZTE recovery screen will appear there.

ZTE reset

4. A couple of options will appear on the screen, select “Wipe data/Factory reset” using the Volume key and confirm the selection with the Power button.

5. Then on the next screen select - delete all user data using the Volume button, press the Power button to confirm.

6. All ZTE data and cache will be erased automatically and a system reboot, factory reset screen will appear.

8. Your phone will turn off and restart.

ZTE hard reset completed. So wait a few minutes. And then you will see that your smartphone works better than before.

• All music, videos, files and folders will be deleted automatically.
• Your entire contact list and history of calls or SMS-MMS chats will be automatically formatted from your smartphone.
• This means that all information will be deleted from your phones that you have saved in your phone before.
• So I suggest you, before you reset your ZTE phone Zmax 2, please create backups your phones like music, videos, files and folders, contact list and other important things.

If you have any questions about hard reset ZTE or any tips or tricks to improve Smartphone mainly ZTE smartphones, please feel free to share with us; We will publish an article about you. If you have any questions about these hard reset tips, please feel free to comment below. Of course you are important to us.