TeamViewer does not connect to another PC: what to do? TeamViewer - what is this program and how to use it

To connect to another computer via the Internet, you will need to download and install the remote web access program TeamViewer on your computer. To download the program, you must visit the official website of the program www.teamviewer.com, then go to the “DOWNLOAD” section Select the type of your operating system. The program can be installed on almost all existing operating systems and, of course, on the most popular ones such as: windows, mac, linux, android, ios. In the "downloads" section for Windows users, select TeamViewer, full version-Windows

After downloading the program you need to install it on your personal computer, laptop or on your mobile device, you need to install the program with administrator rights, if you do not have administrator rights, then you should not be upset, you can launch the instant launch application from the website. This program be in additional downloads.

TeamViewer is designed for remote access to a remote computer. When using the program, the user remotely controls another computer via the Internet.

Using TeamViewer will help in solving any problems with another computer located in any other location. You will be able to provide assistance in setting up a remote computer, and you will also be able to control your computer from another location.

To do this, only two conditions will need to be met: the partners’ computers must be connected to the Internet and the TeamViewer program must be running on them at the same time. When using the program, data is encrypted and a secure connection will be established between computers.

After launching the program on the local and remote computers and establishing a connection between them, the user can proceed to manage the remote computer. Thus, it will be possible to configure the remote computer, provide assistance in solving problems, provide support, show work in programs, etc.

TeamViewer is free for non-commercial use. This program does not even need to be installed on your computer. It will be enough to just run the executable EXE file, and then you should choose how to launch the program.

Dear users!
If you have any questions about this material, leave a comment and we will try to help you.
Best regards, Site Administrator

Dear friend! You might be interested in the following articles:

Time Weaver (eng. team viewer) is a unique software that allows you to remotely control any computer or server in the world. This is very useful if, for example, you need to change some settings or instruct someone, but you are not able or willing to come to the site in person. Next we will briefly describe basic principles work with this program.

How to download and install Time Weaver?

You can download the program absolutely free on the official website of the developer www.teamviewer.com/ by clicking on big button loading in the middle of the screen. Current version- Time Weaver 9, however, on many computers the older Time Weaver 8 may still be installed.

It will be downloaded to your computer installation file programs. Opening it will bring up the installation settings window. Here you must select two parameters - the type of installation, as well as how the program will be used. In addition, it is advisable to check the box additional settings. This way you can choose the folder to install the program and several other parameters.

Now a few words about them:

· Remote Printing - Allows you to control printing to a remote device

· TeamViewer VPN - with this extension you can access and work on local networks as if you were in their zone.

· Microsoft Outlook Meeting Tool - Allows you to quickly and easily schedule meetings in Microsoft Outlook without having to launch TeamViewer.

Immediately after installation the program will be launched. Using it to control a remote computer is incredibly simple. You will see a window in front of you, on the left side of which the key data of your machine in Team Viewer is indicated - ID and password. Let us immediately note that it is not necessary to fill out the registration window on the right side. Registration only gives access to some additional features.

How to use a time weaver to work on a remote computer

To do this, you just need to perform a number of simple steps:

· Make sure that TeamViewer is installed on the remote computer (preferably the same version as yours);

· Find out the key data (ID, password) of the remote computer;

· Fill in the "Partner ID" field;

· Select the purpose of the connection - management or file transfer;

· Click the "Connect to partner" button;

· Enter the TeamViewer password of the remote computer.

After this, a new window will open in which information from the monitor of the remote computer will be displayed, and you will have access to control it as if you were at its keyboard.

× Attention!
Log in to your site account or Create one to receive full access to our site. Registration will give you the opportunity to add news, comment on articles, communicate with other users and much more.

Other materials

A well-known program for installing remote control TeamViewer computer V lately started giving connection errors more and more often. Unfortunately, there are quite a few reasons for this, and to suggest universal method solving the problem is not so simple. But in this article we will try to help you fix the problem when TeamViewer does not connect to another user, it gives a network error.

Working in TeamViewer

How to fix the problem will be discussed below, but now it’s worth telling how to connect to a computer via TeamViewer, because perhaps you are not doing it entirely correctly, which is why problems arise.

So, first we launch the program itself, as a result, a window should open in which your ID and password are indicated in the “Allow control” column; if this is not the case, then most likely you are on the wrong tab. At the top of the program, click on the " tab Remote control".

Next, to connect to another computer, you need to pay attention to the “Manage computer” group. In it you should enter the ID of the computer to which you will connect, select the type of connection (remote or file transfer) and click the "Connect to partner" button. After this, a window will appear in which you must enter a password; the user of the other PC must tell you it.

After all the steps taken, the connection should be established, and you will see the desktop of the OS you connected to. If, after following these instructions, you did not achieve the desired result, then try to find a solution below in the text.

First reason: the program version is outdated

The reason that TeamViewer does not connect to the remote PC may be an outdated version software. As you can easily guess, to fix the problem, you just need to remove outdated version program, download a new one and install it.

After doing all these manipulations, try again - everything should work properly.

Second reason: firewall

U Windows users TeamViewer does not connect to another PC also due to firewall issues. This system utility can block the program from accessing the Internet. To resolve this issue, follow these steps:

Login to the firewall. To do this, open the "Start" menu and click on the "Control Panel" button. In the panel, select the "Large Icons" display and select "Windows Firewall" from the list.

In the left sidebar, look for the line "Allow interaction with an application or component in Windows Firewall" and left-click on it.

In the window that appears, you need to find the names of programs in the list and check the boxes in the “Public” column. This process is more accurately depicted in the image below.

After all the manipulations have been done, click the "Ok" button to apply all the changes and try connecting to the remote PC again. The problem of TeamViewer not connecting should go away.

Third reason: Internet connection problems

Knowing how to connect with TeamViewer to another computer, this is still not always possible due to problems with the Network. There can be many reasons why your Internet is not working properly. The culprit may be the provider, or maybe it’s all due to a mechanical failure, it’s impossible to say for sure. Now we will tell you how to check the Internet connection on your computer to make sure whether there is a problem with it or not:

On the right side of the taskbar, click on the Internet connection indicator.

A small window that appears will indicate whether there is an Internet connection or not.

Like this simple instructions in two stages. If something else is written instead of “Connected,” then feel free to call your provider so that he can suggest options for solving the problem.

Fourth reason: technical work

Continuing to understand the question of how to connect via TeamViewer to another PC if an error appears, we cannot ignore the presence of possible technical work program servers. To verify this, you just need to go to the developers’ website - usually, when scheduled work is carried out, there is a mention of this on the website. If this is really the case, then all you have to do is wait - by the way, the website may indicate their approximate end time.

Fifth reason: program failure

Having passed all four possible reasons There is a malfunction in connecting the program; finally, we can only assume that the program itself is to blame. It is not known for certain why this happens and what is connected with it, but the “treatment” for such a problem is known. By the way, it is similar to the first reason: you need to completely uninstall the program, then download it again, always from the official website of the developer, and install it back on your computer. After completing all these steps, try contacting the other user again, this time everything should be successful.

Conclusion

So we have looked at the five most popular reasons why the program displays an error when connecting to another user. I would like to believe that one of them will help you, however, unfortunately, there is a possibility that there are many more reasons than were given in the article.

TeamViewer is a tool for remote computer control. No matter where you are, if you have a computer with Internet access and the TeamViewer program at hand, you can always get remote access to any computer and get necessary help. In addition to remote access, you can transfer files and exchange messages via chat.

Now we will look at the detailed installation progress TeamViewer programs.

Step 1. First you need to download the program TeamViewer. You can do this on our website by clicking on the following link.

(downloads: 2300)

Step 2. Run the downloaded file by double-clicking on the installer icon. In the security warning window that opens, click Launch.

- Install. (The program will be installed on your computer).

Launch. (The program will start without installation).

Which mode to choose is of course up to you, but I recommend setting the switch to Install and press the button Next.

Step 5 . Read the terms and conditions license agreement and check the following boxes:

- I accept the terms of the agreement.
- I agree to useTeamViewer for personal, non-commercial use only.

To continue installation, click the button Next.

- No (default).
- Yes.

Here the decision is yours. Whichever option is more convenient for you, choose that one. Click to continue Next.

So that you can connect to another computer you will need to enter partner id and press the button Connect to partner.
The computer you are connecting to should be running exactly the same program.

So that the other person canconnect to your computer tell him your ID and Password.

U famous program TeamViewer has great functionality for remote access. It is fully revealed, of course, only in paid subscription. But even in the free edition, this program can be used not only for one-time connections and limited conferences. In this article we will talk about how to use this program to set up uncontrolled access to remote computer devices. In order, for example, to always be in touch with loved ones from the older generation, who sometimes cannot cope with even the simplest tasks with a computer and without our help.

How to work with TeamViewer in general has already been written in, but uncontrolled access is mentioned only in passing. In this publication I would like to cover this topic in more detail.

1. Advantages of uncontrolled access with account connection

Uncontrolled access is access to a remote computer without the need for the user to confirm the connection session. Ensures that TeamViewer is running continuously in the background. You need to configure the program once on remote PCs, laptops or Windows tablets, and in the future you can connect to them at any time when they are turned on and connected to the Internet. TeamViewer allows you to set up uncontrolled access without being tied to account program and with reference to it. In the first case, access is carried out using the ID and permanent password of the remote device. In the second case, connecting to a remote computer is simplified: you do not need to enter any IDs or passwords, the procedure will take place in literally two mouse clicks. Plus, remote devices can be tracked, we will always know if they are on the network.

Every time someone close to you connects to the Internet, we will always see a notification about this in the Windows system tray on our managing computer. Similar to how users of Skype, ICQ and other instant messengers appear online.

Well, in addition we can lead with remote users chat correspondence. Such a mechanism will allow us to quickly provide computer help to our loved ones, without bothering them with unnecessary actions. How to configure such uncontrolled access in a Windows environment?

2. Account registration

First of all, you need to register a TeamViewer account. This can be done completely free of charge either within the program or on its official website.

3. Setting up a remote computer

You can install the regular edition of TeamViewer on a remote computer and configure uncontrolled access in it. But the creators of the program have a special edition of TeamViewer Host for servicing servers on Windows based. It contains only the basic functionality, there is nothing superfluous. It is configured to autoload by default along with operating system and constant background work. It cannot be used to connect to other computers; this version of the program only provides for granting access to the control computer from a single account. The reverse direction can be set by the user of the latter when selecting the “Switching sides with a partner” function. This edition works unnoticed in the system and does not load resources. This best option for the weak remote devices.

Immediately after TeamViewer installations Host itself will offer to configure uncontrolled access.

We can change the name of the remote computer to something more readable - indicate, for example, the device model or the name of a relative.

Since in our case we are talking about setting up uncontrolled access using a TeamViewer account, there is no need to set a password.

That's it - the setup is complete.

We are looking for TeamViewer Host in the Windows system tray and in context menu On its icon, select “Options”.

Go to the “Security” tab. Here, at any time, if necessary, you can set up uncontrolled access from password protection. And, accordingly, enter the data in the fields indicated by number 1 in the screenshot below. And in order to be able to connect to a remote computer in two clicks and not bother with passwords, check the box for easy access, as shown by number 2 below in the screenshot.

Here, in fact, are all the settings. If necessary, you can additionally configure the camera and microphone if video or audio communication will be carried out during remote access.

4. Access from the control computer

So, the remote PC, laptop or tablet is linked to our account. And we can already work with it using different software:

Applications for mobile operating systems,

Programs for desktop operating systems,

Web interface in a browser window.

In any of these software environments We will be able to monitor the activity of remote devices and connect to them. For example, in an account in a browser window we will see whether there is remote computers networks. If not, how long have they been inactive? And, of course, we can connect to them if they are online.

The most functional option is TeamViewer for desktops.