What should you do if your Apple Watch won't turn on, won't pair, won't update, and Mickey Mouse won't tell the time out loud? How to Transfer Apple Watch Contents to New iPhone

It may happen that problems begin to arise with communication between Apple Watch and iPhone, or you just decided to sell your watch. Then you'll need this article on unlinking devices from each other, as well as cleaning your Apple Watch before selling it. 1. Place the devices in close proximity to each other. 2. Open Apple app Watch on your iPhone.
3. In this application, at the bottom, click on the “My Watch” menu. 4. Select the “Apple Watch” panel there 5. Click on the “Unpair with Apple Watch” button. The program will ask for confirmation to cancel synchronization between devices. This will remove your Apple Watch settings and content from your iPhone.
6. In order to clear the data stored on the Apple Watch (return the device to factory settings), go to “Settings”, select “General” - “Reset” - “Erase all contents”. P.S. Please be aware that the iPhone will create backup copy data from Apple Watch. You can subsequently use it to set up a new watch.

How to properly unlink iWatch from Apple ID and iCloud? How to unpair an apple watch

How to unpair iPhone and Apple Watch

Sometimes situations arise in which the user is forced to unpair the iPhone and Apple Watch. For example, when you need to connect smart watch to another smartphone or, if necessary, transfer one of the devices to another user...

Method 1. If you have a smartphone and smart watch

• To properly break up a couple, the smartwatch and smartphone must be nearby.
• Launch the Apple Watch app on your smartphone.
• Open the My Watch tab and select the desired model at the top of the display.
• Click the “i” icon next to the icon of the watch you want to stop pairing with.

• Select Unpair Apple Watch (highlighted in red).

• Press again to confirm the break. In some situations you will need to enter Apple password ID (this depends on your security settings). Before breaking, a backup copy of information from the watch is created on the smartphone, which can later be restored to a new device.
• After the operation is completed, the “Start pairing” item will appear in the application menu.

Method 2: Unpairing without a smartphone

Smart if necessary apple watch You can reset your Watch to factory settings even if you don't have it. iPhone hand. To do this, open on your device: Settings → General → Reset → Erase all content and settings.

Method 3. How to reset Apple Watch if you forgot your password?

When you have an iPhone at hand

• Open the Apple Watch app and go to the My Watch tab.
• Go to General → Reset
• Tap on the item “Erase all content and Apple settings Watch" and confirm this action. In some situations, you will need to enter your Apple ID password (depending on your security settings).

When the iPhone is not nearby

• Connect your watch to charger.
• Hold the Side button until the "Device is turned off" notification appears.

• Press firmly on the “Off” item. and swipe up.
• Click the "Erase all content and settings" button.

• After deleting all information from the watch, it will need to be set up again.

When preparing the material, materials from the relevant sections (1, 2) of the official Apple website were used.

appliner.ru

- Rambler/news

When you need it

How to unlink a watch from an iPhone

2. Open the General - Reset section and select Erase content and settings.

Read also

news.rambler.ru

How to unlink iWatch from Apple ID? How to properly unlink Apple Watch from iCloud?

In September 2014, popular Apple Corporation presented the iWatch, which is fully synchronized with all the company’s products. This new product is an excellent addition to the main device. With its help, the user is given the opportunity to remotely control the main iPhone features, for this, the “i” button should appear on the smart watch when synchronizing devices. Photo: Unlink iWatch from Apple ID

The relevance of such a procedure

After a certain period of time, the owner may ask the question “How to unlink Apple Watch from Apple ID?” This problem often occurs in several cases. Among other options, such a task most often consists of the following:

1. This operation is primarily performed to resolve compatibility issues between mobile phone And smart watch.
2. When selling one of the devices, it is necessary to interrupt the connection between them so that personal information does not reach third parties.
3. Problems updating the operating system.

appleiwatch.name

How to properly unlink Apple Watch from iPhone

Many owners iPhone already got a stylish accessory and use it to the fullest. Sooner or later, the need arises to untie the watch from the smartphone, and this is where the problems begin.

Here are a few the right ways disconnect devices from each other.

When you need it

• When selling a smartphone or watch, you must unpair;
• if you have problems updating software on Apple Watch;
• if necessary, reset the clock to factory settings;
• when you need to troubleshoot problems connecting your smartphone and watch.

How to unlink a watch from an iPhone

Please note that in order to break the connection between iPhone and Apple Watch, both devices must be nearby.

1. Launch the Watch app on your iPhone.

2. Go to My Watch and select your device.

3. Click the information button next to the clock.

4. Tap Unpair Apple Watch and confirm.

Before erasing data, the application will create a new backup copy of the Apple Watch, which can be used to restore data on an old or new watch.

How to perform the procedure with Apple Watch

If your smartphone is not nearby, you can turn it off from the watch itself.

1. Go to the Settings app.

3. Enter your password and confirm the reset.

After a few minutes, the watch will be reset to factory settings and all content will be deleted.

If you forgot your Appe Watch password

You can completely erase all data from your watch without iPhone and entering a password on the device. The watch must be connected to the charger.

1. Press and hold the Side button until the shutdown menu appears.

2. Press and hold Power down until the Erase content and settings button appears.

3. Click Erase content and settings.

The procedure will take a few minutes and the watch will be reset to factory settings.

Source: iphones.ru

internetua.com

How to unpair an apple watch - Recipomania

And icloud is removed

does the method work?

When I start pairing the watch with the phone, it asks me for the email of the coming owner

Gadget addiction is progressing! :)

What is the vulnerability? The information is also protected. Are you going to monitor the watch and then come in and steal it while it’s charging? And who will take the watch? If your watch is stolen, then there is no time for vulnerability!

I’ll go and wring out the watch and connect it to my favorite iPhone, which I’ve already unwrapped earlier))

Axaxa was stolen from VK

AppleInsider.ru Translate the video into English and send it to Apple. They should be aware of this vulnerability.

Well done! :)

And I love the bearded operator in vests! and why are they all the same?

Captains obvious. The acting is terrible, the voices chosen are also terrible. It's not pleasant to watch or listen to.

And in my opinion it turned out very well

Evgeny Belousovnormal reviews and news, and this is more reminiscent of our Ukrainian TV

Did you come here to watch a movie?

Damn actors

Ppts, not for thieves 😂😂😂

Did the boys dress in grandpa's clothes on purpose?

useful info, thank you

So I'll go find a keparik

0:30 Acting

The trio rubbing their hands is simply a frenzy))) am I the only one who thinks that Ilyich is slowly turning into Vaserman?)))

Georg Kuuzik very gradually, but quite likely!)

I wonder how Apple can fix this?

alvamar.ru

How to properly unlink Apple Watch from iPhone

Many iPhone owners have already acquired a stylish accessory and are using it to the fullest. Sooner or later, the need arises to untie the watch from the smartphone, and this is where the problems begin.

Here are some correct ways to disconnect devices from each other.

When you need it

• When selling a smartphone or watch, you must unpair;
• if you have problems updating software on Apple Watch;
• if necessary, reset the clock to factory settings;
• when you need to troubleshoot problems connecting your smartphone and watch.

How to unlink a watch from an iPhone

Please note that in order to break the connection between iPhone and Apple Watch, both devices must be nearby.

1. Launch the Watch app on your iPhone.

2. Go to My Watch and select your device.

3. Click the information button next to the clock.

4. Tap Unpair Apple Watch and confirm.

Before erasing data, the application will create a new backup copy of the Apple Watch, which can be used to restore data on an old or new watch.

How to perform the procedure with Apple Watch

If your smartphone is not nearby, you can turn it off from the watch itself.

1. Go to the Settings app.

2. Open the General – Reset section and select Erase content and settings.

3. Enter your password and confirm the reset.

After a few minutes, the watch will be reset to factory settings and all content will be deleted.

If you forgot your Appe Watch password

You can completely erase all data from your watch without iPhone and entering a password on the device. The watch must be connected to the charger.

1. Press and hold the Side button until the shutdown menu appears.

2. Press and hold Power down until the Erase content and settings button appears.

3. Click Erase content and settings.

The procedure will take a few minutes and the watch will be reset to factory settings.

⭐ Thanks to re:Store for the useful information.

(or create a pair with another iPhone), then you will certainly be faced with the need to unpair the device from the iPhone (break the pair). This is very easy to do: you just need to perform a series of simple steps, and you can do this even without a smartphone.

You may also need to unlink your Apple Watch from your iPhone if one of the gadgets malfunctions.

How to unpair (unpair) an Apple Watch from an iPhone if both devices are in front of you - method 1

1 . Place both gadgets next to each other;

2 . Open the Apple Watch app on your smartphone;

3 . In the window that opens, at the bottom, there will be a menu “ My watch"—you should click on it;

4 . After this, click on the item “ Apple Watch", on the next screen you need to click on "i".

5 . By clicking on the " Unpair Apple Watch", you should confirm the cancellation of device synchronization, after which all data about the watch will be deleted from the communicator.

How to unpair (unpair) Apple Watch without an iPhone - method 2

It is possible to unlink the watch from the smartphone, even if both devices are not next to each other (for example, if the iPhone is lost). To do this, go to the application " Settings" on Apple Watch (gear icon), go from there to the " section Basic", select menu " Reset" and in it click on the item " Erase all content».

This action will reset the Apple Watch to factory settings (all data will be erased) and will also unpair the existing pair with the iPhone.

How to unpair (unpair) an Apple Watch from an iPhone if the watch has a passcode and you have forgotten it

There is a method for unlinking the Apple Watch from the iPhone, even if the watch had a passcode that you accidentally forgot. To do this:

1 . Place Apple Watch on charge.

2 . Press and hold the side button until the slider appears Off.

3 . Press firmly on the slider Off and swipe up, after which a button will appear on the watch screen Erase content and settings.

4 . Click on the button Erase content and settings and confirm the action. The watch will be reset to factory settings (all data will be deleted), and the Apple Watch will also be unlinked from the iPhone.

Many iPhone owners have already acquired a stylish accessory and are making full use of it. Sooner or later, the need arises to untie the watch from the smartphone, and this is where the problems begin.

Here are some correct ways to disconnect devices from each other.

When you need it

• When selling a smartphone or watch, you must unpair;
• if you have problems updating software on Apple Watch;
• if necessary, reset the clock to factory settings;
• when you need to troubleshoot problems connecting your smartphone and watch.

How to unlink a watch from an iPhone

Please note that in order to break the connection between iPhone and Apple Watch, both devices must be nearby.

1. Launch the application Watch on iPhone.

2. Go to section My watch and select your device.

3. Click the information button next to the clock.

4. Click Unpair Apple Watch and confirm the action.

Before erasing data, the application will create a new backup copy of the Apple Watch, which can be used to restore data on an old or new watch.

How to perform the procedure with Apple Watch

If your smartphone is not nearby, you can turn it off from the watch itself.

1. Go to the application Settings.

2. Open section Basic - Reset and select Erase content and settings.

3. Enter your password and confirm the reset.

After a few minutes, the watch will be reset to factory settings and all content will be deleted.

If you forgot your Appe Watch password

You can completely erase all data from your watch without iPhone and entering a password on the device. The watch must be connected to the charger.

1. Press and hold the side button until the shutdown menu appears.

2. Press firmly Turn off until the button appears Erase content and settings.

3. Click Erase content and settings.

The procedure will take a few minutes and the watch will be reset to factory settings.

⭐ Thanks to re:Store for the useful information.

In September 2014, the popular Apple corporation presented the iWatch, which is fully synchronized with all the company's products. This new product is an excellent addition to the main device. With its help, the user is given the opportunity to remotely control the main functions of the iPhone; for this, it should appear on the smart watch when synchronizing the devices. Photo: Unlink iWatch from Apple ID

The relevance of such a procedure

After a period of time, the owner may wonder “ How to unlink Apple Watch from Apple ID?. This problem often occurs in several cases. Among other options, such a task most often consists of the following:

1. This operation is primarily performed to resolve compatibility issues between the mobile phone and the smartwatch.
2. When selling one of the devices, it is necessary to interrupt the connection between them so that personal information does not reach third parties.
3. Problems with .

Options for solving the problem of how to properly unlink iWatch from Apple ID and iCloud

Both devices are owned by the owner

The first step when maintaining data confidentiality is to understand the principle of operation cloud storage. If you manually delete an account, all folders will be permanently destroyed. That is why the topic of how to unlink Apple Watch from iCloud. In order to keep the files intact, you need to take the following steps:

1. Be sure to back up your iOS OS.
2. Go to the settings menu by selecting the appropriate item. Read about that in the mentioned article.
3. Next, find the line called “Delete Account.”
4. Click "Exit".
5. Then select “Delete from iPhone” after entering the password.
6. (You may need to enter an ID).
7. All other questions that arise can be resolved by calling the operator.

One of the gadgets is sold

An alternative situation assumes that the owner of the iWatch has already transferred the device to the buyer. Then another problem arises, which sounds like this: how to properly unlink Apple Watch from Apple ID, if one of the gadgets is not on hand:

1. The easiest way is to ask the new owner to repeat the above algorithm.
2. During operation cloud service and “ ” services, go to iCloud.com/find and delete all files from there.
3. Change the ID password, then another user will not use your account.
4. If you completely stop working with Apple products, unregister from iMessage.

Destruction of information

Among other things, there is an option to destroy information only using iWatch. To do this you need:

1. Go to the menu in “My Watch”.
2. Go to the “Apple Watch” tab.
3. Last action- this is the “Break Pair” button.

If you follow all the rules, you can easily interrupt the synchronization between your mobile phone and smart watch. Now you know how to unlink Apple Watch from iCloud. This procedure is mandatory. Otherwise, your files will be at the complete disposal of third parties.