Apple Watch won't turn on. Apple Watch won't turn on
One of the reasons why Apple Watch 2 does not turn on | 3 series, the battery may be failing. The developers stated that the watch battery is designed for 2-3 years of uninterrupted operation, which implies 1000 charge-discharge cycles. But there are always exceptions to the rules. If it doesn't turn on Apple Watch Sport, the first thing you should pay attention to is the battery.
Our service center specialists will be able to determine the exact cause of the breakdown and will carry out:
- ● free device diagnostics;
- ● estimate the cost of repairing or replacing the battery;
- ● will eliminate the malfunction within the time period agreed with the customer;
- ● they will provide a guarantee for the work performed.
Apple Watch Sport won't turn on: flashing
Another reason why they don’t turn on Apple Watch, may become system failure or software errors resulting from incorrect settings. You can fix it by rebooting the device. If it doesn't help, you should unpair the iPhone and try to restore it again. If this option does not help, it is better to entrust the gadget repair to professionals. Our service center has everything necessary equipment to restore Apple Watch.
Apple Watch Sport won't turn on: display replacement
If Apple Watch won't turn on, then a broken display could also be the cause. Replacing it is a rather complicated process, because often the screen and body are a single unit, not dismountable. During warranty service You can request a replacement of the gadget if the breakdown occurred due to the fault of the developer. But when the warranty has expired, repairs are carried out on a paid basis.
Before contacting the service center you must:
- ● remove the strap and other accessories;
- ● unpair the iPhone;
- ● make sure you remember your password and Apple ID to restore synchronization.
Benefits of working with Apple Favorite
If charging the battery and rebooting does not help, you must contact a specialized service center. Reasons why Apple Watch 38 does not turn on | 42 mm, there may be not only the cases described above.
Apple Favorite employees will help fix the problem and do the following:
- ● repair and replacement of glass and display;
- ● battery repair;
- ● replacement of individual modules and components;
- ● replacing the device with a new one.
If Apple Watch 38 does not turn on | 42, and you cannot determine the reason yourself, feel free to contact Apple service Favorite. We only supply quality parts from trusted manufacturers, and we also have the equipment and specialists to troubleshoot problems of any complexity! Call us, we are always happy to help!
If Apple device The Watch does not turn on and refuses to respond to button presses, try to figure out the cause of the problem yourself. With instructions and necessary tools, you can quickly troubleshoot simple problems. You can find out why the device does not turn on, check the integrity of the control board and the reliability of the contacts even without special skills.
Most often, the Apple Watch device fails for the following reasons:
- the power button is broken
- moisture has entered the protective housing
- The clock froze after an update or as a result of a crash software
- due to mechanical damage, the watch display was broken
A common reason why an Apple Watch device won't turn on is a low or damaged battery. In this case, the battery needs to be recharged or replaced. Hold the button on the side of the device and the wheel Digital Crown to restart the watch until the “apple” - Apple’s signature icon - starts to light up.
Why the device does not start
If your Apple Watch suddenly stops turning on, the problem may be due to a settings issue. Pay attention to what appears on the screen Apple technology notifications. In them, developers describe problems and give options for eliminating them. If apple watch The Watch has run out of power, you should connect it to charger and wait for the company logo to appear.
If your Apple Watch stops turning on or responding to charging, you can fix the situation in the following ways:
- check the depth of insertion of the cable into the connector and the adapter into the socket
- take off protective film from the charger
- clean the device from dirt and dust
- restart the device (press the side button)
How to quickly reboot an electronic device
You can also check if the charging is working properly. If the Watch icon is lit, Apple should be charging automatically. To restart your Apple device and make sure your installed apps are working properly, press the button on the side of your watch and press the Digital Crown.
A common reason why the Apple Watch does not turn on is that the power saving mode is running. In this case, tapping the screen will not start the clock.
What you need to know before you start restoring your device
To turn on your Apple Watch, press the power button located on the right side of the device. At the same time, you will notice that the “apple” is lit. The download time is determined by your Apple device model and is usually about a minute.
The iWatch device belongs to the category of mini-computers, the installed applications on which must be updated periodically. Apple Watch users note that after updating the software, the devices begin to work faster. If you want to put your Apple Watch into battery-saving mode, hold down the button on the right side of the device until the Eco Mode slider appears.
No messages on display
The Apple Watch is unable to function after being discharged. The watch display on which notifications appear consumes a significant amount of energy. Often the reason why notifications do not appear on the device is that the clock is locked or the Do Not Disturb mode is activated. You can solve the problem in the following ways:
- remove the password that is keeping your Apple Watch from turning on and keeping your watch display locked
- make sure your Apple equipment settings are correct
Simple ways to fix devices
If you want to check if the charger is working properly, try restarting the watch. To do this, hold the Side button and Digital Crown for 10 seconds. If the charge icon is not visible, leave the Apple device connected to the charging device for several hours.
Simple repair methods smart watch, which turn off spontaneously:
- drying devices
- replacing charger
- setting up Apple technology parameters
Complex troubleshooting options
If your Apple Watch stops turning on and you can't immediately diagnose the problem, the problem could be serious. The malfunction may be due to a failure of the button responsible for turning on the device, a malfunction of the microcircuit, or other reasons.
To determine the cause of the malfunction, you will need special equipment and tools. With their help you can perform the following repair operations:
- remove and replace the button responsible for turning on the Apple device
- update the software if the watch freezes or turns off spontaneously
- restore Apple watch power chip
- replace the charger connector
U Apple users Watch often encounters such problems - after discharge, the watch freezes or turns off. To force a restart, press the side button and the Digital Crown at the same time. If after a reboot the watch turns on, but you do not see that the “apple” is lit, or a notification appears with a red exclamation point, this means that the device cannot be used due to a breakdown of the microcircuit or other parts.
An effective method for solving device problems
If your Apple Watch device does not turn on and you need professional help, contact the YouDo service providers. Specialists will quickly and inexpensively find out the reason why the device does not turn on, the clock is frozen or the power button has stopped functioning.
Cooperation with Yudu performers provides the following advantages:
- provision of on-site services to any specified address
- replacement of parts with original components
- 24/7
- experience in servicing all models of iWatch devices
Leave a request on this page, describing your problem (for example, “Watch logo is on, Apple is not charging”). Experienced performers will help you inexpensively any day of the week if your Apple Watch device does not turn on at all.
The developers of the Apple Watch 42mm Sport have made every effort to ensure that if the device is dropped, receives an impact, or is hit water will get in, the damage was minimal. However, the fall may be from a great height, the impact is very strong, and there is too much water. This can lead to a number of possible damages, as a result of which the watch may simply stop turning on. What could be the reasons for them not turning on?
- The power button itself may fail. There is no need to change the button itself unless it is deformed or lost. Here we need to replace the cable connecting to motherboard button and Digital Crown (navigation wheel). This will restore the functionality of the original button;
- The battery life may decrease, which happens to every battery over time. In this case, you need to replace it;
- the system may break down wireless charging, due to which the watch does not charge and, accordingly, does not turn on;
- The motherboard may also be damaged. In case of problems with the motherboard, as with the main part of any device, almost all functions can “fly”, so diagnostics and possible motherboard critically needed.
"INFO-MALL" will advise you service centers, in which they can easily conduct full diagnostics and find out what exactly is wrong with your watch. The problem will be fixed as quickly as possible, and repair work will be provided with a 6-month warranty. You can also always take the opportunity to call a specialist to your home or to another location convenient for you.
In 2015 Apple company showed her vision of a “smart” watch, which was called Apple Watch. It is worth noting that it was rumors about their development that gave rise to a huge number of similar watches even before their release. In this article, we’ll look at how long a charger holds a charge, whether the battery is durable and how charging is done, we’ll look at the Apple Watch charging cable and what a power bank is ( power bank) for Apple Watch.
The device has a lithium-ion battery, which must have interesting feature– charging and its speed depends on the level of the battery and charge at the time of charging. Thus we can say that the charge is coming not evenly.
According to some studies, one percent of the charge reaches the device in an average of one minute. However, if the watch is 80 percent charged, the speed drops.
According to the same studies, from 10 percent to 80 it takes about 70 minutes, and to “get” to 100 you need to spend another 40 minutes. It is worth noting that the same data is indicated on the company’s website. It is worth charging the Apple Watch correctly in two approaches. But this is individual and depends on how much charge remains in the evening. Typically this figure is about half the charge. Thus up fully charged It takes one and a half to two hours, which in principle is not so bad.
It is recommended to charge the device as follows: half an hour in the morning, and then about 40 minutes in the evening. The numbers are approximate and sometimes vary by plus or minus 10 minutes. You can charge it when you don’t need to spend a lot of time with the Apple Watch: during breakfast, shower, etc. If a training session is planned, the time increases accordingly.
The watch has an energy saving mode, but according to user reviews, this rarely happens even when they forgot to charge it in the morning. There are tips that can help you increase operating time; later we will reveal some of them in more detail:
- Turn on economy mode.
- Monitor your battery charge using widgets on the main desktop with watch faces.
- Install simpler dials.
- Use less brightness.
- Disable animations.
- Set up notifications and select only the programs you need.
- Play with the power of haptic notifications.
If the Apple Watch does not charge, then contact technical support or a service center about the problem.
Charging on Apple Watch
When the Apple device's charge is low, the creators recommend charging the watch by removing it from your hand.
In order to charge, you need to:
- Connect the magnetic power cable and use a special case or docking station to charge the device. The Apple Watch charging cable is included, which is convenient. The charger itself must be connected to the network for it to charge.
- Wait until the watch is fully charged. To find out that charging is on device goes or that they are charged, you need to see if there is green lightning on the screen.
Let's look at ways to save energy.
Using Eco Mode
If you turn on eco mode, the time will be displayed on the main dial, but the charge will be conserved. On the side you just need to press the button and the time will be displayed in the standard 24 hour format. It is worth remembering that in this mode the device does not sync with the iPhone and some other functions are also limited.
Enabling Eco Mode
This mode is activated when general level charging drops below 10%. The device notifies you about this and offers to use it. In the case when the battery is discharged almost to zero, the watch switches to this mode automatically.
In order to enable the mode yourself at any time, you must fulfill the following conditions:
- Swipe up on the home screen to open System Control Center.
- Next, select the battery charge level and press the economy mode, after which you need to confirm its choice.
Turning off eco mode
To turn off the mode, the following is required:
- Press and hold the side button until the Apple logo appears.
- Reboot the watch and possibly put it on charge.
Use the minimum required brightness
There is no standard and usual brightness adjustment in the device; it changes itself and adapts to external lighting. However, it is possible to independently choose one of 3 options automatic settings. This is done either through the watch itself or using an application on the phone. To do this you need:
- Select "Brightness and text size".
- Select the brightness that suits you best.
In winter, this value often reaches its minimum. In the summer or just in sunny weather outside, you should choose those that are higher, otherwise it will be very difficult to make out what is written on it.
Disable animation
Animation not only wastes your battery, but, to be honest, it often lags. Although this was fixed in watchOS 2, problems still occur. To disable them you need to:
- Open on iPhone app with a clock.
- Then you need to select the item with the clock.
- Select "Basic".
- Go to accessibility.
- Reduce movements to a minimum.
Use simpler watch faces
If there are colors on the dial other than black, then these places consume the most energy. It is for this reason that it is worth saving energy by using simple watch faces, where most of the screen is occupied by black elements. This is a feature of any device with OLED display. Black parts of the screen mean those parts are turned off.
Likewise, if the watch faces are animated or bright photos, then the charge will be spent more and faster. So the same popular dials with Mickey Mouse and Minnie Mouse are very wasteful. It is enough to select a regular dial and its various options.
It's worth playing with the power of haptic notifications
The default setting is that the watch vibrates on the user's hand. It is logical that the more and stronger vibration, the more charge is spent on its maintenance. To set up notifications and adjust vibration strength, you need to:
- Open the clock app on your iPhone.
- Then you need to select the item with the clock.
- Select an item with sounds and tactile signals.
- Set a lower vibration and balance it as desired.
Set up Apple Watch notifications
It’s better to place fewer ads to save not only battery power, but also nerves. It's worth noting that if notifications were initially turned off on the iPhone, they will be turned off on the watch, but this process can be adjusted as follows:
- Open the clock app on your iPhone.
- Then you need to select the item with the clock.
- Select Notifications.
- Turn off notifications that are not of great importance.
Conclusion
As we can see from the article, the watch holds a charge for a long time. They charge quickly and the charging time reaches no more than 2 hours to 100%, that is, they do not differ for a long time. To increase the service life of your device, just use the tips presented above.
I remember in “The Master and Margarita”, Woland said that: “...man is mortal, but that would not be so bad. The bad thing is that sometimes he is suddenly mortal, that’s the trick!” Unfortunately, this happened with my second generation Apple Watch.
Yesterday everything was still working great and there were no signs of trouble. In the evening, as usual, the watch charged quietly. I note that the charge lasted me about two days and there was no noticeable degradation of the battery from the moment of purchase (and they only lasted 9 months). However, in the afternoon, looking at the clock, I was surprised to find that it had gone to energy saving mode(?) And this taking into account the fact that in the morning the charge should have been 100%. Of course, that day turned out to be quite active for me, but not to the same extent... after a while Apple time The Watch turned off completely, and when I tried to turn it on, a screen was displayed that I had never seen before.
The realization that something was wrong came after the watch did not come to life, being connected to the charger all night. Apart from the Apple logo, there was nothing else on the screen, and even that disappeared immediately after disconnecting from charging, and the Apple Watch itself became noticeably warm, which had never happened before.
Essentially this is whole computer, although very compact, so I have already had to force restart the Apple Watch several times (by holding the side button together with the Digital Crown and holding them for at least 10 seconds)... however, this trick failed and I realized that this time Everything is really bad and you can’t handle it on your own.
Here's what we found out. If the watch is charging (noticeably heating up), then after about 20-30 minutes the logo appears and after 10 seconds disappears, and so on several times. Apparently, the Apple Watch is trying to run Watch OS (currently 4.2), but it fails, the watch goes into cyclic reboot and the apple logo goes out again. And finally, when I tried to restart, an unambiguous message with a red exclamation mark appeared on the screen about contacting Apple technical support. And this is already a death sentence and there is nothing you can do here on your own.
Actually, this is what I was told a little earlier when I contacted technical support on the Apple website, since I had already tried all the options that were proposed to do with the watch in case of failures. For those interested, here are the direct links:
The Apple Watch also has a diagnostic connector (most likely, it is through this that the firmware is uploaded to the watch during production), which is not mentioned at all on the Apple website. You can verify its presence by removing the strap and carefully looking at the recess in which it is attached. There remains a small hope that the problem is not hardware, but software, but the likelihood of such an outcome seems negligible to me. This is how I console myself.
I even managed to find an unofficial cable online for connecting to this connector at a price of almost a hundred euros... you can also download the firmware for them there. Just what kind of firmware are they and where do they come from, because the Apple Watch is not updated via iTunes. In general, everything is far from clear.
The solution seems to be obvious - the watch is under warranty, you can check your rights to service and support on the Apple website. Everything is so, if not for one moment... the desire to save sometimes backfires. Now prices for watches have decreased, but six months ago the markup in our country was noticeable. In general, now I would not hesitate to buy a watch from any official reseller, which I strongly recommend that you do too. Then I simply took it to the store under warranty if something happened, and took new ones.
Unfortunately, this is not my option - all that remains is to take it to a certified apple service (and there is no such thing in my city). And here it is no longer clear how they will react to the fact that I do not have a receipt, and the watch itself is not for Russia (the ZP/A symbols in the MP072ZP/A marking indicate that they were produced for Hong Kong and Macau). Somehow I don’t really believe in the world Apple warranty(maybe this is just a myth?) and even more so does it apply to our country.
Like this sad story... mentally already began to prepare myself for buying a new watch. So don’t repeat my mistakes and don’t listen to all sorts of figures on the Internet about delivery from America. Yes, it’s cheaper there, but if something breaks, you’ll be left alone with your problem.