EDGE is a technology for high-speed data transmission in GSM networks. Disabling the EDGE network on your phone

EDGE is a technology that allows data to be transmitted over mobile network at speeds up to 200 Kbps.
This is on average four times faster than GPRS.

The main application of EDGE is high-speed Internet access, organization mobile office- an indispensable thing for business people.

And also, such opportunities as: exchanging pictures, photographs and other information via the same Internet, watching streaming video, Internet radio, sending faxes, mail, and many, many other interesting things.

Based on its advantages, we can say that EDGE technology is designed for 2 different classes of the population: businessmen, for whom it is important to always be up to date with the latest events, and teenagers for whom the Internet is a way of life.

To access modern services via EDGE it is enough to use a device that supports this technology, for example, a card Sony Ericsson GC85 or Sierra AirCard 775.

Initially, EDGE was intended as an extension of GPRS technology.
They first started talking about it back in 1997 at ESTI (European Telecommunication Standardization Institute).

At the same time, its first decoding was presented as Enhanced Data Rates for GSM Evolution.

EDGE uses eight-position phase shift keying (8-PSK), which provides approximately double the maximum speed compared to GPRS - it is 384 Kbps, while the maximum theoretical speed of GPRS is 171 Kbps.
Of course real speed much lower.

For transfer EDGE information, like GPRS, uses timeslots (time segments of a frame).
There is a policy identical to GPRS for distributing timeslots between channels for reception and transmission.

Another advantage is that maximum speed stream in one timeslot is 48 kbit/s (versus 9.6 kbit/s for GPRS).
Naturally, such a speed is achieved only with ideal reception; in reality, everything will be much worse.

Depending on the quality of communication, there are 9 coding algorithms from MCS-1 to MCS-9 (the latter has the lowest coding redundancy, and therefore the fastest).

Subsequently, with the advent of the 3rd generation network specification, the name EDGE was rephrased and now it stands for Enhanced Data rates for Global Evolution.
So we can say that EDGE is a full-fledged transition link on the way to 3G or, as it is sometimes called, 2.5G.

EDGE, unlike GPRS connection which is very unstable, and the speed in rare cases rises above 56 Kbps, there are two incomparable advantages: high speed and communication quality.

Therefore, EDGE technology has every chance of replacing the obsolete GPRS technology.

Answers to questions

BIOS and UEFI What is... System (motherboards) Computer monitors CD, DVD,
Blu-ray discs Mouse, keyboard BP - Power supplies Storage devices - hard drives Random Access Memory (RAM) Computer Audio MFPs and printers Miscellaneous issues Video cards

Your question:

How to disable Edge on your phone?

Master's answer:

In some cases, it becomes imperative to disable GPRS/EDGE data in your mobile phone. For example, this function is absolutely not needed in roaming conditions. Another example of the need to disable this function is excessive traffic.

For phone models Samsung shutdown functions occurs through the request *#4777*8665#. In the "Attach mode settings" menu, select the "gprs detach" item and uncheck it. After this, the phone is turned off and rebooted, as a result of which the function is deactivated.

To disable the EDGE service, you need to change the APN access parameters - through it this service comes to the phone. For example, you can put a dot at the end of the address and the function will not work. If you request data, you will receive the message “Service not connected” in response, so no information will be transferred. Resetting the setting is simple - just remove the dot and the address will become correct.

You can use the SBSetting utility. Such a program can be found on the Internet, where it is available and free. After installing the program on mobile phone you need to go to the menu and find the option to enable/disable EDGE.

It is not difficult to disable the function and iPhone owners iOS 4.0. In the phone menu, select the “Settings” section, then “General” - “Network”. The Cellular Data option must be disabled. After turning it on, not a single program will enter the Internet via GPRS traffic.

The subscriber needs to go to mobile internet – Safari browser. The link “iPhone No Data.Com” takes you to the specified resource. Finding the " Turn off EDGE/3G" (it means shutdown), you need to click on it. A dialog box with the “Install” button will open on the screen, after clicking on which a dialog box with the “Install Now” button will appear. If you click on the button, the EDGE service will be disabled on the iPhone . If the subscriber uses WiFi connection, this function you don't have to turn it off.

Beeline network subscribers can contact customer service his mobile operator. The operator must disable the "Any apn" service, which is activated automatically. This service is responsible for providing the EDGE service. When the "Apn" service becomes zero, the phone will be off the network. You can also ask your operator to deactivate GPRS. The fact is that EDGE is a simple extension that makes GPRS work at a higher speed.

This article will help you understand what the Edge option on your phone means.

If you use the Internet through your phone, then you may have a question: what does Edge mean in a phone? This option helps to increase the speed of information transfer in GSM networks. In order for you to use it, your operator mobile communications should support this option.

Heavy load on network lines, the level of data supply, the amount of free information in the network database - all this affects the operation of Edge. But using this option has its advantages compared to gprs:

• Highest speed of information transfer.
• Possibility of access to global network from anywhere in your locality.

Currently, this seemingly modern, but already slightly outdated option is gradually being forced out of the global mobile communications market. Evolution of standards cellular communications moves forward. This is necessary for consumers who live in the rhythm of a big city. After all, you need access to the Internet not only at home or at work, but also on the subway or on a minibus on the way home.

Users often ask the question: what does Edge mean in Samsung? On the phone Samsung Galaxy S7 edge prefix talks about curved screen. This version is much more popular than the previous model.

It's rare to find a user with Edge on their phone these days. This technology is being replaced by 3G and 4G networks. They have an even higher information transfer speed and a better signal.

Video: SPEEDTEST WIFI VS 2G/EDGE VS 3G VS 4G/LTE

Instructions

Icon with the letter E, or simply the letter E, in top panel mobile device means that the phone is within EGPRS coverage area. Majority modern models phones support different networks; The standard is GSM, although UMTS is also an option. The appearance of the letter E indicates that the access point is open to the device, but does not necessarily mean that the EGPRS network is used for data transfer. Find out what exactly is indicated in the “Access Point” field in the phone settings: the value WAP GPRS or GPRS Internet.nw implies the use of this particular network to transfer information. In this case, the letter E only means the potential possibility of using the EGPRS network.

If you are sure that the phone is working under Android control, uses an Edge connection to actively connect to the Internet to check for possible updates, some forums advise using a specialized service code *#4777*8665# to open the Attach Mode Settings menu. Specify the GPRS detach command and reboot the mobile device.

Apple Company does not explicitly disable the GPRS/Edge data service, although in roaming conditions, for example, this function may be too expensive. Therefore, to disable this function, you need to use a tweak to change the APN parameters in the iPhone configuration. To do this, open the “Settings” menu located on the main page of the phone and go to the “General” item. Expand the Network link and select the Edge section. Print the sign. (dot) in the “APN Address” line immediately after the address. This action will lead to the fact that when you try to use this function, a message will appear indicating that the selected service is inactive and data cannot be transferred.

Sources:

• How to temporarily disable Edge data service?

Using mobile Internet based on edge is beneficial for those for whom freedom of movement when working on the Internet is necessary. There are several ways to increase connection speed, varying depending on the task at hand.

Instructions

Increasing speed when using edge is possible by reducing the number of programs that use the existing Internet connection, or by minimizing the elements that are loaded during the loading of Internet pages. To speed up web surfing, it is recommended to configure your web browser in such a way that additional elements, such as pictures or java and flash elements, will not be loaded. Make these changes in your web browser settings. Also disable all programs that in one way or another may interfere with loading pages. These include instant messengers, downloaders, and torrent clients. It is important to disable all active downloads carried out using the browser - they are often the main reason for slow loading pages.

To increase speed when downloading files, optimize processes that affect your network connection. Close your browser after stopping all active downloads. Disable your torrent client, even if there are no active downloads. Open the tray and close programs that are running in background. During the download, it is also advisable to disable the antivirus, as well as programs that download their updates. Check this action by launching the task manager and opening the running processes tab. Disable all processes that contain update in their name - in at the moment time they download updates.

When downloading a file using a torrent client, follow the recommendations outlined in the previous steps. In addition, configure the client in such a way that the maximum number of simultaneous downloads is one. Select all downloads and set the upload speed limit to one kilobit per second. Highlight the current download and give it the highest priority, removing the speed limit if there is one. Do not start processes that use an Internet connection until the download is complete.

Quite often it becomes necessary to disable GPRS/EDGE data transmission on your phone for a while. This especially needs to be done in roaming conditions, so as not to temporarily use the service. Also, the service has to be turned off when the traffic exceeds.

Instructions

Dial the sequence *#4777*8665# (for Samsung phones). In the "Attach mode settings" menu that opens, select the "gprs detach" item and uncheck it. Turn off your mobile phone and turn it on again, after which the option will be deactivated.

To disable the EDGE service, slightly change the access parameters of the APN through which you receive this service. Just put a dot at the end of the APN address. When requesting data in this case, you will receive the message “Service not connected” and the data will not be transmitted. To return the service, replace the setting with the correct one by removing the dot.

Use the SBSetting utility. This program can be downloaded from the Internet in the public domain. Install it on your phone, go to the menu and find the option to enable/disable EDGE.

If you have iPhone iOS 4.0, disabling EDGE won't be difficult. Go to the phone menu, select the “Settings” section, then “General”, then “Network”. Disable the Cellular Data option. After its activation, no program will access the Internet using GPRS traffic.

Go to the mobile Internet - Safari browser. Follow the link “iPhone No Data.Com”. Then click on the button that says “Turn off EDGE/3G” (i.e. turn it off). The “Install” button will appear in the open dialog box, click on it. A dialog box with an “Install Now” button will appear. Click on it, thereby disabling the EDGE service on your iPhone. Please note that if you use a WiFi connection, it is not necessary to disable this option.

Call the customer service of the cellular operator Beeline if you are a subscriber to this network. Ask to disable the automatically connected "Any apn" service, which is responsible for providing the EDGE service. With a zero "Apn" the phone will not go online. Or ask to turn it off GPRS service(EDGE is a simple extension that allows GPRS to operate at higher speeds).

Edge can be used to disconnect any mobile device from the Edge network. various ways, although some of them are characterized general principles actions that can be used on all models cell phones. Let's figure it out: what is the network and how can you turn it off on your smartphone?

What is EDGE

How to disable EDGE on your phone

If you are sure that a mobile phone that runs on Android OS uses an Edge connection to produce active connection to the Internet in order to check for updates, on some forums it is recommended to use the specialized service code “*#4777*8665#” to bring up the Attach Mode Settings menu. After this, you need to specify the GPRS detach command and reboot the mobile device.

Apple does not provide an explicit option to disable the GPRS/Edge transmission protocol, although depending on the conditions in which roaming is used, enabling this function may be too expensive for the subscriber. To disable this feature you must use a tweak to change the APN values ​​in the configuration iPhone devices. To do this you need to open “Settings” by going to home page devices, and go to the “Basic” category. Next, you must click on the “network” link and select the Edge category. Then you need to print the sign. (dot) in the “APN address” field after entering the address. After you have completed the steps, if you try to use this function, a message window should appear indicating that this service is disabled and data transfer over it is impossible.