• Gostov drawing frames for Word. Download and insert beautiful frames into a Word document. Free collection of frames for text design in Word, with installation instructions

    Diploma and course projects are assessed according to two main criteria: content and design. And although students traditionally believe that the main thing is the content, during the defense of their diploma it happens that some great job Points will be reduced for inaccuracies in design. To prevent this from happening, it is better to immediately comply with all formal requirements.

    General parameters for the thesis design are regulated GOST 7.32-2001, which applies to all text documentation of research works.

    According to which GOST to make frames

    In engineering and technical universities, it is required to use frames in the design of theses. Framework standards are regulated by a separate document. This GOST 2.301-68 “Formats”, one of many in the set of GOST ESKD - unified system design documentation. The dimensions of the frames are indicated in Table 1 of this GOST:

    According to GOST, on a sheet of A-4 format the frame should be 210x297 mm. The margins from the edge of the sheet at this size will be equal to:

    Left – 20 mm

    Right, top, bottom – 5 mm.

    Frame templates in text document There are the following types:

    These frame standards are used when designing title page, explanatory notes, drawings, tables and graphic documents in scientific projects.

    How to fill out frame stamps

    In the lower left corner of the frame there is a sign - a stamp, the fields of which are also filled out in accordance with GOST, detailed information is entered on the first page of the document. On the second and subsequent pages, the stamp is filled out in a simplified form.

    Stamp on the first (title) page of the document:

    The following information is entered into the stamp fields: scientific work(the numbers correspond to the pictures above):

    1. - name of the product (in accordance with GOST 2.107-68);
    2. – document designation;
    3. – letter assigned to the document (GOST 2.103-68);
    4. – serial number sheet (if the document has 1 sheet, the field is not filled in);
    5. – total number of document sheets;
    6. – department where the student is studying;
    7. – nature of the work;
    8. – names of persons certifying the document;
    9. – signatures of persons whose surnames are indicated in field 11;
    10. – date of signing the document;

    It is not necessary to fill out fields 14-19 in the academic work.

    An example of the design of a stamp on the title page of a drawing work in a diploma, given on the website of the Kazan university:

    Ready-to-download sets of frames in WORD format

    Frames can be made manually in the Word editor or downloaded ready-made templates on the Internet.

    In order not to look for frames on third-party resources that may be unsafe, you can download as ZIP archive or separate files necessary framework.

    Frame format – A4, all parameters comply with GOST.

    In the kit you will find:

    A4 sheet with frame - List_A4_s_ramkoj.docx

    A4 sheet with frame and large stamp for the first page - List_A4_s_ramkoj_bolshim_shtampom.docx

    A4 sheet with frame and small stamp for subsequent pages - List_A4_s_ramkoj_malym_shtampom.docx

    A4 sheet with a frame and a cell for the page number - List_A4_ramkoj_jachejkoj_dlja_nomerov_stranic.docx

    You can fill out the frame stamps in the Word editor according to the requirements of your university. To add frames to your work, you need to copy the entire contents of the template page and paste it into new page open document.

    Sheet with frame for thesis work in tabular EXCEL format- Ramka-dlja-diploma-v-excel.xlsx(The site administration thanks Anastasia Kazarova for providing the frames)

    An alternative way to create frames is to create templates

    Eat even more convenient way creating frameworks. You can install on basic package Microsoft Word program is an additional template that allows you to insert the required type of frame into any created document.

    To set the template option

    1. Open the Forms A4 folder in the archive and extract the file of the same name with the extension “.dot”.
    2. Then find the folder on your computer Program Files where collected installation package programs, in it go to the folder Microsoft Office> Office 14 (other numbers may apply) > Startup.
    3. You need to drag it into this folder specified file Forms A4 – and the template is installed.

    To work with frames, open new document Word, a security warning will appear at the top - click the button "enable macro content". At the top right in the toolbar there will be a new item called “Add-ons” where you will see different frame templates. Select the one you need and start filling out.

    The Word text editor is so flexible that, if desired, you can create in it, and, and advertising brochure, and , and even beautiful. And with the help of tools and drawing you can do greeting cards and not complex collages. If you have the desire and imagination, you can create business cards, certificates, and even colorful electronic ones in the same Word. Many people use Word only as a text editor and nothing more, but just add a frame and the same simple text document will become much more interesting and attractive.

    I will show you how to add a frame to a document using a text example. Microsoft editor Word 2010. For those who still have the old Word version 2003 installed on their computer, you can read this. And starting from version 2007, you can follow this article.

    Go to the tab Page layout, and select the tool called Page Borders.

    If you want to make a frame only for a specific paragraph or block of text, then it is better to go to the tab Border.

    If you need a frame for the entire sheet or even a document, then stay on the tab Page. The process of creating a frame for a specific paragraph, block, or entire page is exactly the same.

    Choose Type lines of the future frame, Color, Width and how to apply it (to the entire sheet or just to a paragraph).

    In the field where a sample of your future frame is shown, there are squares on the left and bottom, by clicking on which you can add or remove side, top and bottom borders.

    On the tab Page there is more interesting feature Drawing. If you click on the small black arrow on the side, a drop-down list will appear with small drawings of Christmas trees, hearts, apples, etc. Choose a drawing and see what you can come up with.

    There is also an interesting button at the bottom left Horizontal line, with which you can in the right place document, make a beautiful dividing line. The main thing before creating it is to place the cursor in the place where it should be.

    Well, we looked at another tool for our creativity. I hope that the framework will be useful to you more than once in your work.

    Frames for drawings in word. A student is a busy person and has no time to study. As it was sung in one old song: “From session to session, students live happily... And then the “end of the world” comes.” You can't do everything in one night. And there is so much to do. Drawings and specifications alone are not enough. What should I do? Is it really possible to make all these frames by hand? Easier, hang yourself! (don't take this to management). Don't worry, dear students. People were found and took care of lazy people like you and me. Eh, how did we live without computers before? I remember drawing those damn frames by hand all night long. And the font turned out to be clumsy and crooked due to fatigue. I will never forget these torments. Unless the memory fades. And now the frames can be slapped at once, as long as the printer does not balk.

    And so we begin to create a masterpiece, that is, a frame for drawings in Word.

    To get started, download this plugin for yourself.

    The archive contains instructions for it and drawing fonts. You will insert the fonts as described in my previous article.

    Unpack the archive. It contains 10 files with help and fonts. You can read the help in PDF format.

    I didn't bother installing the template, because... I don't need this template all the time. If you also need it only for a while, then I advise you to do it this way.

    Open a new Microsoft Word document. Go to the menu – File – Open .

    A window will open Opening a document .

    Install File type – All files(*,*) . Find the file in the selection window Normal.dot, select it and press the key Open .

    A new panel will appear on the toolbar (underlined with a red line), and a ready-made frame for drawings will appear in a clean document. The panel already has built-in fonts, templates for specifications and frames.

    IN Word 2007/2010 this panel with frames will be in the menu Add-ons(at the top is the extreme one).

    In cells that can be changed, when you click the mouse, a hatched frame appears and the cursor begins to blink. Those fields that are intended for manual data entry are not highlighted. They made our life so much easier.

    That's it. Let's work until the night is over.

    Advice

    Save the document under a different name (name it differently), otherwise you will have to clear the template from previous entries each time.

    Video: Frames for drawings in Word:

    Subscribe to our YouTube channel and to new articles by email so you don’t miss the most interesting things.

    Headers and footers in Word are text and images placed on the pages of a document that are not related to the main text, but are of an informational and design nature. At correct use You will be able to draw up a document that only needs to be sent for printing.

    Frames for text in Word and footers

    Headers and footers in word placed on each page of the document in the top, bottom and side margins. In these areas you can place page numbers, text frames, time and date, company logo, document title, file name. In my opinion, headers and footers in word useful for an engineer in that they can be used to draw up a document in accordance with the requirements for design and working documentation, insert a frame and stamps of the appropriate forms. To get acquainted with headers and footers in Word, I suggest doing a little practical work on creating a template for the first sheet with a frame for all types of documents in accordance with GOST 21.1101-2013.

    How to make a frame in Word using headers and footers

    I think, having figured it out specific example, further work with headers and footers, to insert a word frame, will not terrify you. Various ways We will not consider performing certain actions (blowing the article), I think you will familiarize yourself with them. Let's look at the sequence of actions on how to make a frame in the header and footer in Word 2010 (other versions are similar):

    1. First of all, download the file with the prepared source materials by clicking.

    2. Open the file and copy the inner frame for the text of the document on the second page by right-clicking at the moment when the cursor appears with a crosshair when hovering over the frame.

    4. Important. To create a special header and footer for the first page, check the box on the "Header and Footer" tab in the "Options" section

    5. Press the keyboard shortcut Ctrl+V, or paste word frame document by right-clicking.

    6. In the top menu Format → Position → Additional options markings...

    7. In the window that opens, set the frame parameters for the text as in the figure below.

    8. Go to the "Design" tab and click "Close Header and Footer Window"

    9. Copy the table of additional columns of the sheet on the third page. The table is selected by clicking on the crosshair that appears when hovering the cursor over the table area.

    10. Similar to inserting a frame for text word on the sheet, follow the steps and .

    11. Place the cursor in the table area by right-clicking to open the "Table Properties" window.

    12. Click in the sequence shown in the figure below and set similar parameters. Close the header and footer window (same as)

    13. Copy the title block template plate according to Form 5 on the fourth page. The table is selected by clicking on the crosshair that appears when hovering the cursor over the table area.

    14. Place the cursor on the first page with a text frame. In the feed top menu Insert → Footer → Edit Footer.

    15. Repeat steps sequentially and set the parameters as in the figure below.

    16. Ehh... well, it seems like that’s it, you’ve made a frame for the text in Word, close the window for editing headers and footers ().

    Different headers and footers in one document

    The method of creating headers and footers with frames for text in Word on subsequent pages of the document is similar to that described, with the only difference that in the footer you need to insert a table in the form of 6. Now you can create a free document with two different headers (frames), for the first and subsequent pages. But what if you need to create different headers and footers (more than two) in one document? A separate article is dedicated to this. By the way, in it you can download free frames for a word document with ready-made headers and footers.

    How to remove a frame from headers and footers in Word

    In order to delete or change a text frame or the entire footer, go to edit mode and delete all existing elements. The fastest and easiest way to get into editing mode is by double click mouse, placing the cursor on the footer element (frame, stamp), or use the top menu ribbon Insert → Header/Footer → Remove Header/Footer.

    Healthy. In order for the document to be completed and ready to be sent for printing, there are not enough page numbers, but read how to do this.

    How to insert a frame in Word. Video

    Read more: