Iphone 3g is charging but won't turn on. IPhone does not turn on after discharge - what to do

If the iPhone charges but does not turn on, the problem may lie in physical damage, operating system malfunctions, or simply a faulty charger. And the user cannot always solve the problem himself. In such cases, you need to know what to do so as not to further damage your smartphone. Let's take a closer look at all the causes of the malfunction and ways to solve it, both independently and through service center.

What are the causes of iPhone malfunctions?

An iPhone may not turn on for various reasons. The main ones:

• physical damage or manufacturing defects;
• battery malfunction;
• breaking charger;
• ingress of water or dust.

In each of these cases, it is necessary to contact a service center, since independent attempts to restore the functionality of the phone are unlikely to be successful - the case is non-separable, and opening it manually at home is considered a reason for the expiration of the warranty period.

If the owner of the smartphone tries to disassemble the iPhone himself or take it to an uncertified service center, the manufacturer declines responsibility for any problems with the device.

Physical damage or manufacturing defect

If the phone does not turn on while charging, but shows that it is charging, the reason may lie in:

• physical damage leading to irreversible or severe impairment of the functionality of the smartphone’s hardware;
• factory defect, which can relate to both the smartphone itself and the charger.

In such a situation, it is worth checking the visual integrity of the phone, the presence of dents and scratches. Sometimes internal damage cannot be noticed without disassembling the case. It is also important to study charging. If you have access to another charger that matches your phone model, you can check its functionality.

In rare cases, the outlet may be at fault. It would be a good idea to try charging your phone from another network outlet. If none of the options allowed you to turn on the iPhone, the problem is loose contacts or internal damage. In this case, you need to contact an Apple service center.

Manufacturing defects and a number of physical damages are covered by warranty. A complete list of them can be found on the company’s official website.

To check the condition of the battery, the iPhone user only needs to place Mac computer. To do this you need:

1. First install the coconut Battery utility on your PC.
2. Connect your phone to the computer via a special USB cable and turn on the program.
3. It will reflect the condition of the battery. If it is unsatisfactory, you will have to take the smartphone to a service center.

The component may be damaged due to manufacturing defects, severe temperature changes, or physical damage to the phone case. If the utility shows that everything is fine with the battery, the problem lies somewhere else.

Checking the charger

In some cases, it is the charging that is to blame - the phone will show that it is charging, but the voltage is too low or absent due to a faulty power supply.

The cause of the charging malfunction may be physical damage or a manufacturing defect. Then you need to go to the Apple store and try to charge the phone from another device. If the problem is in the power supply, with new charger The iPhone will turn on.

Ingress of water or dust

The latest iPhone models can survive being underwater without any problems. For example, models in the X line are capable of staying at a depth of up to a meter for no more than 30 minutes without damage. This allows you to achieve the maximum degree of protection against moisture and dust - IP67. The only requirement after such bathing is mandatory pre-drying. All instructions on this matter are given in the user documentation.

If the phone has been under water longer or natural wear and tear has allowed moisture to get inside the case, you need to turn off the device and contact a service center. It should be noted that latest models Water getting inside is not a warranty case and will therefore be paid directly by the owner.

Many users recommend placing the device in rice so that it absorbs moisture, but you should be careful here - rice dust can clog into the phone connectors. In addition, the developers remind you that it is not recommended to connect a phone that has been exposed to water to a charger until it is completely dry. Otherwise, an important component may burn out and then you will have to replace it.

For older models, repairing water damage will cost more than buying a new smartphone.

How to get your iPhone back working

If the issue is a failure or other malfunction of the device’s operating system, you can restore the phone’s functionality in two ways:

• restore using iTunes;
• update operating system;
• force the system to reboot using the device buttons.

Operating system problems are not uncommon. If the user himself did not violate it optimal performance, the reason may lie in a banal failure or imperfection of the software. One way or another, in in this case the owner of a smartphone can achieve warranty service, if the iPhone OS really does not work correctly and the reason for turning off the device is precisely in it.

Problems with the operating system can be caused not only by an unsuccessful update, but also by the installation of unlicensed software.

If the OS is not the culprit, the user should not try to fix the problem on their own, as this could cause further damage to the phone. In addition, such attempts lead to refusal of further warranty service - you cannot open the case, replace original components, etc.

Restoring using the brand’s “native” software does not take much time. To do this you need:

1. Turn on the program and connect your smartphone via USB cable to the PC.
2. Turn off the device by holding down the Power and Home or Power keys and the volume control.
3. Press and hold Home until the iTunes logo and software connection indicator appear on the screen.
4. If there is a problem in the system, a notification will appear on the PC screen - “there is a problem with the iPhone; it needs to be updated or restored.”
5. Confirm the operation and wait for it to complete.

After this, the device will reboot on its own. In some cases, recovery takes a relatively long time - from 30 to 40 minutes. This depends on the amount of data stored in the last backup created.

Operating system update

To update the system you need:

1. Connect your phone to your computer and go to iTunes.
2. Activate the operating system update through the program.
3. Force a reboot of the phone if necessary using the buttons (if the smartphone does not respond).
4. Wait for the iPhone to turn on or turn it on yourself.

In some cases, updating the system makes all the difference operational problems and allows you to continue using your smartphone as usual.

Force reboot

To restart your iPhone using the buttons, you need to hold down:

• for older 7th models - Power and Home until the company logo appears on the screen;
• for models with 7th inclusive - Power and volume control.

Press and hold the buttons until the logo appears on the screen. After this, the system will recover itself. If this does not happen, there is a reason to try again. But after two attempts, you will have to resort to the methods mentioned above.

There are several useful tips, which will help maintain the smartphone’s performance for a long time:

1. If moisture or dirt (dust, sand, animal hair, etc.) gets into the iPhone case, you should not try to open it yourself. It is enough to clean the outside of the phone as much as possible, dry it in a towel if we are talking about water. To avoid such problems in the future, you need to purchase special protective covers.
2. Do not use unlicensed software and cancel automatic update systems. The latter is designed to eliminate OS freezes and solve other problems that developers deal with. Timely update will extend the life of the system.
3. Protective cases will protect your phone from damage, as will careful handling of the charger.
4. You shouldn't trust your smartphone strangers, take it to dubious service centers and try to solve the problem yourself. You need to set a password on your phone, graphic key or set up fingerprint or Face ID unlocking so that no one can tamper with the device from the inside.

It should be noted that on relatively older phone models, up to iOS release 9.3, setting the date January 1, 1970 to 1:00 could lead to the device refusing to work. The smartphone did not boot, showing only the company logo. But this bug has already been fixed by the developers, so it’s not scary modern models brands.

The cause of a device's failure to operate correctly can be due to either physical damage or an operational malfunction. And if in the first case the user will have to visit a service center, then in the second he can figure it out on his own if he installs it on his computer iTunes. In any case, the developers do not recommend that iPhone owners try to manually open the phone case or give the phone into the hands of friends - this will lead to the brand refusing warranty service. If the problem can be solved by replacing the charger, then the user is very lucky.

Apple technology deservedly enjoys worldwide popularity and the love of customers: these are high-quality, modern and reliable gadgets with their own special “soul” and atmosphere. Rare iPhone owner will say that he is unhappy with his device or that it has ever seriously let him down. Along with this, even Apple devices, as well as any other electronics, can break.

The reasons are varied, but that is not the point. So, let's simulate the situation: one “beautiful” morning you picked up your favorite iPhone in anticipation of checking the news feed in your favorite social network and found that the device would not turn on. Shock, panic, resentment, disappointment. Calm down! In many cases, the problem can be solved with “little loss,” i.e. without the need to contact a service center.

iPhone refuses to turn on

Important note! If your favorite gadget has been in the cold, it may refuse to turn on precisely because of such an extreme test. Batteries tend to discharge almost instantly when low temperatures. If this happens in your situation, let the iPhone stay warm for a while before proceeding with further actions.

Next, do the following:
connect the charger to the iPhone. Let the gadget sit with the charger connected for at least 15-20 minutes. If the problem was a completely dead battery, the smartphone will turn on by itself. If this does not happen, follow the steps below sequentially;

Press the Power and Home keys together (Home and Power/Lock buttons) and hold for about 15-20 seconds (until the company logo appears on the device screen). The specified key combination is responsible for quick reboot devices. Wait for iOS to fully launch.

If your iPhone still refuses to turn on

You need to do the following:
Check the functionality of the power adapter and USB cable in combination with another iPhone. If everything works, your phone's connector is broken. Contact the service center;
contact a service that specializes in selling components for iPhones and check whether your smartphone responds to connecting a 100% working charger. If it does, the charger is broken. Buy new.

If your iPhone freezes after turning it on

1. Connect your iPhone to your computer/laptop using a USB cable.
2. Turn on iTunes.
3. Press the Home and Power buttons at the same time to activate forced reboot. Keep the indicated keys pressed until the corporate logo appears on the iPhone screen and the recovery mode screen appears.
4. After waiting for the system to prompt you to restore/update, click “Update” and wait for further notifications. iTunes will try to normalize the operation of the gadget without harming user data.

If nothing happens after 15-20 minutes, the recovery mode will close on its own and you will have to repeat the above steps.

When should I contact the service center?
1. Charging/flashing/forced reboot did not produce results.
2. The screen is still dark, but the phone makes sounds/vibrations.
3. The display displays information, but does not respond to anything.
4. There is no possibility of a forced reboot due to physical malfunction power and home buttons.
5. iPhone is frozen with the company logo on the screen or shows a screen “flooded” with one color.
6. iTunes does not “see” the iPhone.

Helpful note! Use only original components to charge your iPhone - the power of budget analogues may not be enough to fully charge the battery. In addition, by using non-original components, you expose your device to potential risk.

Apple is the most popular brand in the world, not least thanks to its line of branded smartphones that break sales records. That being said, almost everyone agrees that Episode 5 was one of the best. Therefore, many prefer the same 5s to the new and not so far advanced, in terms of technology, eights and sevens.

There are situations when the 5s turns off and does not work, which forces the owner to panic and spend any money on fixing his favorite gadget. But even if 5s does not start, this is not always a reason to go to the service.

In some cases, the accessory can be repaired by the average person, but you will have to independently diagnose and find the cause of the breakdown. So what to do with the iPhone 5s if it doesn’t start and doesn’t show signs of life?

System failures

No matter how much Apple boasts about the reliability of its accessories, one of the main reasons why the iPhone 5s does not start is system failure. It is a common practice for one update by incompetent programmers to turn hundreds of thousands of phones into “bricks”.

This especially affected older models, whose hardware simply could not handle the early, unoptimized version of iOS.

So, if the phone turns off by itself and does not show signs of life, it is better to take it to the service if you have a warranty card. And when there is no guarantee, but your “satellite” has turned off and does not turn on, does not respond to charging, you have to fix everything yourself. Fortunately, it’s easy to do and you don’t need any programming knowledge.

How to fix a phone that won't turn on due to a system failure

The phone turned off and won’t turn on, what should I do? The main thing is not to panic and let the device discharge, then put it on charge and hold it down at the same time Home buttons and inclusions. This will take you to something like a “developer menu”, after which you can reset the latest updates yourself.

There is also an option to roll back through iTunes for PC, in most cases it is even easier.

But there is also a downside to this repair - in essence, it is a reset to factory settings, so most of your data that is not stored in the cloud will simply disappear. In order to avoid such a fate, make backup copies of your memory and transfer photos and other media to other media, and important files keep in several copies.

Battery problems

It happens that the smartphone is switched off and does not turn on, and does not respond to power in any way. In such cases, the problem lies in the battery. Just recharge the phone battery after it is completely discharged, this will save most of the devices and let you know exactly the source of the problem.

If the phone started, the reason was in the battery, and you should order a new one. It’s more unpleasant if the gadget charges but doesn’t turn on. At the same time, you see the charge indicator and can already estimate that the phone is full of energy.

The problem may still lie in the batteries, and no the best way check this by moving the battery to another gadget and looking at its reaction. Does it behave the same? Then a new charger will no longer help you.

Faulty charger

What if the problem why the iPhone 5s does not turn on lies in the charger itself? This is also a fairly harmless option and can be solved by purchasing a new accessory, but how can you test your assumption without spending a pretty penny?

It is best to have a voltmeter and an ammeter with you; they will allow you to accurately determine whether power is being supplied.

Another way to figure out the reason why the device does not start and does not respond to charging is to try the power supply on another device. With the proper experience, you can disassemble the charger and replace the burnt capacitor or resistor yourself, or just buy a new one.

Flashing and viruses

The phone does not start or work after you downloaded the application from unknown source or decided to get super user rights? Then the guarantee automatically disappears, according to the agreement you signed when you first started the program, and you will have to get out of the situation yourself.

How to fix a smartphone that has a virus

It is possible to revive such a “brick”, but it will be much more difficult. The main thing, as soon as the iPhone turns off, is not to touch it. Let the gadget discharge completely, then connect it to the PC and see if the computer recognizes it and reacts at least somehow to charging. If everything is fine, then a regular system reset will no longer be enough, and since the Apple product stopped starting after the system was demolished, you need to put it back.

It is no longer possible to make the situation worse; you have essentially erased iOS from permanent memory, so the screen went blank and won’t turn on. The only solution is to upload it back there.

Since your actions will not aggravate the situation, before paying a specialist, try to fix the gadget yourself. Most of the programs for installing firmware are freely available, but finding licensed firmware is more difficult. Since you tried to reflash the device, the entire necessary software available on your PC and as soon as you find a suitable archive, try to repeat all your previous steps.

What to do if your smartphone is charging but won’t turn on

It’s much more unpleasant if the smartphone shows charging, but is not recognized by the system, then you just have to wait, literally. Set the device aside to completely de-energize the battery. This will take from a couple of days to a week, depending on the amount of the last charge.

Then connect it to the PC again and this time it should be recognized somehow. It doesn't matter if an unknown device or data storage device is seen by your computer. The main thing is that the device is in the system at all - this will be enough for recovery. And if even after a complete discharge nothing happens, then the problem probably lies in the hardware and you need to contact a service center.

What not to do

In a panic, people are capable of doing a lot of stupid things, and when it comes to technology, everything only gets worse. Firstly, do not disassemble the Apple device under any circumstances. Disassembly removes warranty tags, it is almost impossible to disguise scuffs on bolts, and a consultant, hearing the phrase “it won’t start after disassembly,” may well charge a couple of thousand, saying that you damaged some part or bridge while trying to find a breakdown.

Therefore, even if the device has gone out and died, then think about every action you take to repair it, so as not to make it worse. Even if you managed to aggravate the situation, it is better not to mention this to the service center and refer to the original problems with the phone.

There are situations when the iPhone is simply dead, and the owner begins to panic, “why the iPhone won’t turn on” and breaks it, starting to disassemble it and mindlessly tinkering with the circuit boards. Therefore, before carrying out any manipulations, diagnose the cause of the breakdown and carefully study the materials for correcting the breakdown.

And if the accessory suddenly runs out and this is not the first time the device turns off halfway through the charge, feel free to change the battery.

When should you go to a service center?

What to do if you drowned it or dropped it by hitting it on a hard surface is a separate question. Your task is to make sure there is no hardware failure by inspecting the case for cracks and dents.

Almost any “five” that does not work and does not start due to the user’s fault can be restored, but evaluate the feasibility of this. If replacing the board costs more than a new device, it is better to buy a new smartphone.

Conclusion

We tried to cover in as much detail as possible all the ways to solve the problem. Now, you should roughly understand what “symptoms” indicate what damage and how to correct each of them.

A more visual instruction video is below. Couldn't fix the problem and your Apple device still won't turn on? Then it’s better not to disassemble the gadget, but take it to a service center. Have you found another way out of the situation? Leave a comment and help others who might have the same problem!

See you on the pages of the site!

Video instructions

In fact, he is the editor-in-chief of the entire site, always in touch with the best authors. Proofreading and proofreading is his job. An excellent expert in his field. Excellent understanding of the technical nuances of electronics. Occasionally writes and publishes original articles.

• published articles - 15
• readers - 3 179
• on the site since September 5, 2017

When you try to turn on your iPhone, and it doesn’t show any reaction, it’s not pleasant, but there are several ways to deal with this problem, which will be discussed below. The reason may be a deep discharge of the mobile phone or a frozen firmware. If your iPhone 5 won't turn on, what should you do?

When the battery is low

If your smartphone's battery is dead, then to correct the situation you should connect it to the network and wait a few minutes. On next stage try to launch. Sometimes in such situations, a low battery icon appears on the display. This indicates that the battery is too low and not enough time has passed to turn on. Leave your smartphone connected to the network for a longer period.

There was a software failure

If the device freezes and stops responding to pressed buttons, you can only try to reboot it in “hard” mode. To do this, press and hold two keys at once - Home and Power. They should be held for about 10-20 seconds, after which the Apple symbol should appear. The system will reboot and then the smartphone will start working again.

These are the most common situations, and it is not difficult to find a way out of them. If both procedures did not produce any effect, then your problem is more complex.

The following could happen

• The device’s battery has failed (you can’t help it yourself, you have to take it to service)

• The USB cable is damaged (needs replacement)

• Dirt has accumulated in the connection connector (can be cleaned)

• mechanical damage different types(this could have been preceded by your mistake - the device was dropped, moisture got in, etc.).

The apple is on fire

When the smartphone does not complete the loading stage, but the logo appears and disappears on the screen, the reason could be failed update operating system or crashed when trying to restore a previous state. In such a situation, it may seem that the phone has served its purpose, but do not rush to draw conclusions.

We need to work on bringing him back to life.

• Launch iTunes and connect the USB cable to your PC.

• Turn off your smartphone by pressing the Power and Home buttons.

• Hold the Home key and connect the cable to your mobile. Do not release until the connection symbols and iTunes icon. The device will notify you when it enters recovery mode.

• Now let's move on to restoring the device. In this case, you will need to wait a long time, since the phone will lie there for about an hour without any signals indicating its status. But the chances of recovery are great.

Now you know what action to take if your iPhone won't turn on. We hope our tips helped you.

So, let's start with the fact that, first of all, the iPhone with an apple on the back panel has long become an indispensable companion for us. The gadget helps us in work and communication, travel to public transport become more fun with music, books and various applications for iPhone. Sometimes users encounter the problem that their smartphone does not turn on. There are many reasons for this problem, but in 50% of cases you can launch your favorite gadget on your own. Without contacting specialized services. I will talk about this and much more in detail in this material. We will look at the different reasons and explain how you can start the device. Photographic materials and, of course, professional advice will help you with this.

After reading the article, you will learn:

— How to start an iPhone after a long period of inactivity.

— How to turn on an iPhone if long-term charging does not help.

— What to do if the iPhone does not turn on, but the apple is on fire.

— How to restore an iPhone using DFU.

— Reasons why the device cannot be turned on.

— My iPhone won’t turn on, what should I do?

IMPORTANT! The instructions described in this article are suitable for all Apple smartphone models, including the latest versions. Owners of other Apple gadgets – iPad and iPod – may also encounter this problem. The solutions for the tablet and multimedia player are exactly the same.

iPhone won't turn on because it's completely discharged

Quite often, the user forgets to charge his iPhone, gadget for a long time lies discharged. After such “downtime,” the device may refuse to turn on even when connected to a charger. If this is your case, then you can quickly return your phone to working condition. The secret is simple - you need to let the phone sit for 15-20 minutes.

After this, the iPhone should start. Also some owners Apple technology It is recommended to hold your finger on the power button longer if the phone has been in a discharged state for a long time. Depending on the model, after 15-20 minutes the device connected to the network will light up on its own or you will have to activate it yourself.

Useful advice! It is not recommended to leave the phone in a discharged state for a long time. This applies to any gadgets, including Apple devices. Being in a discharged state negatively affects the condition of the battery. Try to charge your phone on time so that its components last as long as possible.

There are more important point– long stay in the cold. Sometimes a user leaves home with a fully charged device, and two hours later his iPhone does not turn on, and he cannot turn it on. It is important for you to remember that batteries portable devices At low temperatures they discharge much faster. Before putting a cooled smartphone on charge, it is recommended to warm it up in your hands and only then connect the charger.

So how? Did it help? Great! If the device displays the same black screen, then check out other solutions to this problem.

The second reason for the black screen

If the iPhone is fully charged, but you cannot turn it on, then the reason for this “behavior” may be the save mode. Some iPhone models automatically switch to this mode if they are rarely rebooted. Most often, this oddity occurs in the third and fourth generations. Exiting the gadget from save mode is very simple: you need to simultaneously hold down the “Home” and “Power” buttons for 15-20 seconds.

After this action, an apple logo should appear on the screen. Wait 1-2 minutes, after which the phone will boot into normal mode. Switch to save mode and complete discharge These are the most common causes of a black screen. If none of these methods help, then the problem most likely lies somewhere deeper.

Useful advice! Holding down the “Home” and “Power” buttons can help you in other situations. This is especially true with a frozen application. There is no need to wait 10 minutes for the device to cope with the error in the program on its own - just restart the iPhone with this combination.

iPhone won't turn on - apple is on fire

In rare cases, a defect appears when the phone does not turn on, but the Apple logo may appear and disappear on the display. There may be several reasons for this problem:

First: Update to the latest operating system iOS systems it didn't go well. This usually occurs due to the device being disconnected from the charger during the update, the device being turned off, or due to a software glitch.

Second: Failure when trying to restore backup copy operating system. This happens due to incorrect recovery and failure to follow the recommendations given by the installer himself.

Third: Unsuccessful jailbreak. Hacking the iOS system is always a risk, and if you also downloaded poor quality assembly, then the chances of partially damaging the device are extremely high.

Regardless of what led to this problem, it can be solved quite easily. The recovery mode that needs to be launched will help us. IMPORTANT! To perform this action, in addition to the iPhone itself, we will need a computer, a USB cable for connection and an installed iTunes latest versions. After that you can start.

1. We need to enable iTunes on personal computer or laptop. Check if there are any updates for this program. Recommended to use latest version so that the result is successful.

2. Now we connect the USB cable to the computer, but you do not need to connect the phone to the second end of the cable yet.

We take the iPhone and hold down the “Home” and “Power” buttons, wait 20 seconds until you notice an opening on the screen system menu. Now we hold down the “Home” button on the device and in this position connect it to the computer. You must hold this button until you see on the screen iPhone image plug and iTunes logo. It looks like this:

The program running on your computer will inform you that the connected device has entered recovery mode.

Now we just have to click the “Restore” button. We wait for the process to complete and again fully use our device. It should be noted that the method described above allows you to solve the problem if the iPhone does not turn on. If this method did not help in your case, then we move even further.

Recovery iPhone work using DFU

Make sure there are no problems with the charger and battery. This method should only be used if others have not helped, since restoring the operating system via DFU will delete all data on your iPhone. If other instructions did not help you deal with the black screen, then go to DFU.

Before starting the procedure, you must leave your iPhone connected to the charger for at least 10 minutes. After this, you need to connect your iPhone to your computer using a USB cable and launch the latest version of iTunes.

Here we also need to hold down the “Power” and “Home” buttons for 10-15 seconds, then release the “Power” button, without removing your finger from the “Home” button. The image below shows in detail how this operation is performed:

You need to hold the button for about 15-30 seconds. If exiting DFU mode was completed successfully, nothing should appear on the screen. If you fail for a few seconds, iTunes will give you a message - “Entered recovery mode.” It's okay, follow the steps described above again, but I recommend using a stopwatch in this case.

After logging in DFU mode, you need to restore the operating system on your device. To do this, you need to click on the “Restore iPhone” button in iTunes. If for some reason you got into this mode by accident, then to exit you need to disconnect from the device USB cable and again press the combination of the “Home” and “Power” keys for about 10 minutes. After these steps, your phone will reboot. For another example, I recommend that you watch the video at the end of this article: iPhone won’t turn on, solutions.

Other reasons if the iPhone does not turn on

So, in today's article, I have listed cases that can be solved programmatically. Even a novice user can restore their iPhone using these instructions. But if the methods described in my article did not bring desired results, then the reason for a non-working iPhone may be:

- Usage non-original cable. If after failure original device, you have purchased more cheap option from a third-party manufacturer, then this may be the problem. I recommend that you use original accessories.

— Your iPhone battery has died. You can check it on another device. IMPORTANT! Change battery necessary at a service center so as not to stumble upon a fake. After installing the new item everything should work fine.

— The USB cable or mini adapter does not work. The same as with the cable - take the device along with its accessories to a service center and check their functionality. Sometimes the problem occurs due to the use of a non-original cable.

— The USB cable or charger connector is damaged or clogged. If there is debris clogged inside, you can see it under the light of the lamp. Sometimes the damage can be mechanical, there is also only one way out - a trip to the Apple service center.

— Damage to the processor or chips. If there was no damage, then you will be given a new device under warranty. Additionally, I recommend that you read the following information:

THIS IS INTERESTING: About a year ago there was a “Joke” on the Internet, in which the user was asked to set a certain date (I won’t write it) and check what would happen. After rebooting the smartphone, it stopped starting. All you could see on the screen was an apple. If you suddenly encounter such symptoms, then this video will help you:

Check out this method, who knows, maybe it will help solve this problem.

Concluding today’s topic “The iPhone won’t turn on, what should I do?”, I want to say so that you don’t suffer in vain, if my above mentioned methods did not bring any results, then it’s better to go straight to the service center - it’s not worth wasting your time and effort. Yes, and diagnostics are carried out free of charge. Well, I hope that this material helped you, and for outside help I didn't have to apply.