• How to make a landscape view of a sheet. How to make a page landscape in the middle of a document

    When creating multi-page documents V text editor A number of Word users may be faced with the need to present a number of document pages in portrait orientation, and another row in landscape orientation (especially if this concerns materials that include various charts, graphs, and so on). In this case, an attempt to change the orientation of the desired page completely changes the orientation of all pages in the document, which is not at all necessary for the user. In this article I will tell you how to make one page portrait and another landscape in Word, and what methods exist for this.

    How to make one page portrait and another landscape in Word - methods

    If you need to create one portrait page in Word and another landscape page, then I recommend using a number of methods, which I will outline below. At the same time, I note that these methods work with versions of MS Word 2007 and higher, and if someone has older versions of a text editor, then I recommend abandoning the mastodon programs and installing a more modern version of MS Word. So, let's move on to listing the necessary tools.

    Method 1. Select the desired text

    So how to make landscape orientation on one page in Word? If you have several pages of a document in portrait orientation, but want to present some text from of this document in landscape form, then follow these steps:


    The required text will be transferred to a separate page in landscape format, and you will receive a visual example of how to make one page portrait and another landscape in Word. If you need to reduce the font on your computer, the instructions have been described by me.

    Method 2. Page markup

    An alternative to the first method is the page markup of the document you need. So, if you were unable to make one page landscape and the other portrait in Word using the first method, then do the following.

    Let's say you have five pages of text in book layout, and you need to make the second and fourth sheets in landscape format. Proceed as follows:

    Starting from the second page, all pages became landscape.

    1. Now we need to make the third page a book page in Word. Place the cursor on the upper left edge of the third page, again enter the page settings, but there select “Landscape” and “To the end of the document”.
    2. The third and subsequent pages will become landscape. Now we go to the fourth page again and use the same algorithm to make it book-ready.
    3. Then we move to the fifth and make it landscape. I think the essence of the actions is clear to the reader.
    4. As a result, we get this result.

    How to make one page landscape in a Word document and another portrait page [video]

    You can see how these methods visually look in the video below.

    The methods I have listed will help the reader answer the question “How to make one page portrait and the other landscape in Word.” In most cases, the first method is sufficient, which effectively places the text you need on the page in the orientation you need. If you want to mark up your document in advance, then create the required number of pages in advance (the “Insert” tab - “ Blank page"), and then use method No. 2, and your idea will be effectively implemented.

    How to do album sheet in Word?

    Today, continuing to study the Word text editor, we will look at how to make a landscape sheet in it. By default, all pages in the editor are in portrait format. Thus, they are oriented as if we were writing on a regular piece of paper, only not with a pen or pencil, but using a computer keyboard.






    Sometimes situations arise when the volume and size of the text do not allow it to be placed on a sheet of portrait orientation. For this case, there is an option to turn pages into landscape view.



    In this article we will talk about how to convert a book format into a landscape format, either for the entire Word document, or just for individual pages. As usual, let's look at several examples of creating a landscape sheet. And at the end there will be a short video.

    Making a landscape sheet among book sheets in Word 2003 for one page

    Creating a landscape view in Word 2003 is not at all difficult, especially if you give this look to the entire document. To do this, open the “File” tab in the main menu and find the “Page Options” line there.



    In the window that opens, select “Landscape” in the “Orientation” section. It is also shown with an icon in the form of a landscape leaf. And click “OK”.



    As a result of this operation, all pages in the document became landscape. But this is if it is necessary to turn over all the sheets. What if we only need one landscape sheet? For this purpose, we will use the “Page Break” operation. Place the cursor at the end of the page after which the landscape sheet will go. Next, in the “Insert” menu, find the line “Break”.



    In the window that opens, select “From the next page” and click “OK”.



    Now we go to the page we need and transfer it to landscape view using the already familiar operation: “File - Page Options - Landscape View”. As a result we get the following:


    How to make landscape sheets in Word 2007 only one page?

    Changing portrait orientation to landscape in Word version 2007 is done in a similar way, only the arrangement of tabs and menus is slightly different than in 2003. Here we will only need main panel and a tab on it “Page Layout”. Having opened this tab, we need to find an icon called “Orientation”, clicking on which will open a menu with the options “Portrait” and “Landscape”.



    By clicking on the "Landscape" button, all pages will take this orientation. But, again, we only need one landscape-type sheet. Here, to carry out this operation, we will again use the page break function. In new versions of Word, unlike old ones, when working with breaks, you can display non-printable characters to make it more convenient to work. We enable this function in the feed:



    Now let's move on to the breaks. In the “Page Layout” tab, find “Breaks” and select the line “Section Breaks” - “ Next page».



    Now we place the cursor on the page that needs to be oriented as landscape and do as described above. As a result, we get only one landscape page.

    Making a landscape sheet in Word 2010 for several pages

    Making a landscape sheet for several pages in Word 2010 is not difficult. As already mentioned, the general algorithm for solving this problem is as follows: Turn on the “Page Layout” – “Orientation” – “Landscape” mode.



    However, this action results in landscape pages being generated for the entire document. If we need to make only one page, then we do it by creating breaks. Place the cursor at the end of the sheet, open “Page Layout” – “Breaks” again and select “Section Breaks” – “Next Page”. After this, we place the cursor on the page that needs to be made landscape and apply the algorithm described above. The page has become landscape.


    However, if there are more pages after it, they have also become landscape. You can return them back to the book version using the same scheme, only instead of landscape, select “Portrait”. How to arrange landscape sheets between book sheets? Yes, everything follows the same pattern. You just have to work a little more.


    Set up the landscape page as usual. We return all the pages following it back to book format. Next, we again make the next page landscape, again return the following pages that have become landscape pages to portrait, etc., until we create the right number album and book pages. As a result, we get a document like this from alternating landscape-book sheets.



    Let's summarize:


    1. Place the cursor at the end of the sheet, open “Page Layout” – “Breaks” and there select section breaks – “Next Page”.

    2. Place the cursor on the page to be formatted. “Page Layout” – “Orientation” – “Landscape”.

    3. We remove all subsequent album pages. Place the cursor at the end of the sheet, open “Page Layout” – “Breaks” and there select section breaks – “Next Page”. And - “Page Layout” - “Orientation” - “Portrait”.


    For fast switching In page layout mode in Word versions from 2007-2016, you can use the icons in the lower right corner of the screen:




    For the next landscape page we do everything the same way. And we do this until we have established the required number of landscape and book pages.

    We get one landscape sheet, and the rest portrait sheets in Word 2013-2016

    Installation of pages in newer versions of Word is similar to previous ones, only user interface will look slightly different. Here we will need a tab called “Layout”. Here we find “Page Settings”, then “Orientation” and here we select the “landscape” button.



    By clicking on it, we get ready-made landscape sheets for the entire document. If you need to make landscape only a few individual pages (or just one), then everything is much simpler here. First of all, select the text on those pages that will need to be expanded. Next, visit the “Layout” tab and the “Page Options” section again. A window will open in front of us where we need to select the “Fields” tab:



    Here, first select the orientation – “Landscape”. Then go to the very bottom, to the “apply” line. In the drop-down menu, set “to selected text”. Click “OK” and you’re done. The program will automatically place the breaks itself and rotate required pages. Good luck in mastering the Word editor, and at the end there is a short video on how to mark up album sheets.

    Greetings to all those wandering around Word 2016 in search of information on landscape orientation pages (one, several or all) in a document. Today we will discuss this issue with you, as before in previous “Cribs,” in detail, with all the details. Anyone who reads this article, and even more so watches the video posted below, will no longer have any confusion about changing the format of Word pages. Shall we get started?

    How to make a landscape page in Word 2016 for the entire document

    By default, all documents of the Word 2016 text editor, as well as all previous versions, are presented in book format. But, if you have an idea to create your creation in the form of an album, then it is very simple to implement it.

    All operations are carried out on the tab panel " Layout" Go to the first section on the left " Page Options", click on the button " Orientation" In the drop-down menu, select landscape design for the document. The task is completed.

    But let’s also see what else Word offers us in “ Page settings»:

    • by clicking on the “Margins” button, you can select indents from six templates or set them as desired;
    • button " Size» will allow you to select future format printing in both book and landscape versions;
    • button " Columns» you can split the text into 2, 3, 4, 5 columns, setting their width at your discretion;
    • about the button Gap“We already talked in the Cheat Sheets” on headers and footers and numbering; In the future, I plan to write a separate review about all the capabilities of this team.

    And it is also necessary to note that if you change the orientation of the pages of the entire document, the format will change accordingly title pages. You can always choose the appropriate one in the “ Insert", section " Pages».

    And now, dear researchers Word programs, let's look at a more interesting problem.

    How to make several pages landscape in Word

    That is, friends, you understand what to unfold in landscape format we will not have the whole document, but only it individual pages. Those of you who carefully read the “Cribs” about page numbering and headers and footers, by analogy with the material given there, may decide that we will again begin to divide the document into technical sections. And they will be wrong! Hurray, hurray! IN in this case Word will do this for us. So the tedious preparatory work of separating selected pages into separate sections is not required.

    So what needs to be done? Everything is very simple this time. In order to make only a few pages landscape in Word 2016, we take 7 simple steps:

    1. select the text intended for landscape pages;
    1. open the tab panel " Layout»;
    1. Left-click on the arrow in the lower right corner of the “ Page Options»;
    1. In the window that opens, select the tab “ Fields»;
    1. note landscape orientation;
    1. in the line " apply» select « to selected text»;
    1. click " OK».

    When working in the Word text editor, it is not always suitable portrait orientation pages. Sometimes it is necessary for the pages to be like in an album, i.e. located horizontally. It's not at all difficult to do this. It is much more difficult to create a landscape page in Word in the middle of a document. This is where you have to work hard.

    Default O The page orientation in Word is portrait, but it can be changed to landscape if necessary. How to do this?

    This may be necessary when creating reports from or for an album.

    1. Select a team – File – Page Options...

    2. In the window that opens “ Page Options » select the tab « Fields" In the section " Orientation» click on « Landscape" and save by clicking the " OK ».

    If you want your document to have only one or more sheets in the middle of the document in landscape orientation,

    then place the cursor on the page that should be landscape and select from the menu – File – Page Options . In the window that opens " Page Options " on the " tab Fields" in the section " Orientation» install « Landscape" Below in the section " Sample" in the window " Apply" in the drop-down list, select " until the end of the document " and press the button " OK ».

    Next, place the cursor on the page from which the book format will again appear, and do the same. Just select " Orientation » — « TOlower " And in the section " Sample" in the window " Apply" set also "to the end of the document".

    As you can see, nothing complicated.

    The same can be done in a text editor Word 2007/2010. To do this, open the menu Page layout and to the right of the block name Page Options Click on the little black arrow. A window will open Page Options .

    Do everything else in the same way as described above.

    This is how you can make a landscape page in Word in the middle of a document .

    If you have Word 2007 or 2010 installed, you can watch a video tutorial on changing the page orientation:

    Read more: