Remove the back cover of the BQ Strike. How to open the phone and remove the back cover from Xiaomi
Instructions
Before unscrewing the back panel, turn on silent mode using the switch on the left side of the device. After that, turn off the iPhone by holding down the power key located in the upper right part of the device.
Screws that allow you to remove back cover, are located on the bottom of the device. To unscrew them, use a special screwdriver designed for disassembling mobile phones.
Disassembling the panel. After you remove the battery from phone, you will have access to the screws that secure the panel. They should be unscrewed in order (given their size, the tip of a kitchen knife is ideal for screwdrivers). After unscrewing one screw, mark its location on the previously drawn diagram and place it in the appropriate place in the drawing. Unscrew all the screws in the same way, after which you can remove the panel itself.
In addition to the screw fastening of the panel, it is also secured by plastic couplings of the product itself. In order to remove old panel, rid it of the old couplings (carefully inspect the body to understand how the panel is attached to it).
Video on the topic
Sources:
- how to change iPhone panel in 2019
The mobile phone is a research subject for companies that produce technology. If until recently this device was used only as a means of communication, now it is equipped with so many additional functions and applications, which is more reminiscent of a pocket computer. At any time you can reach your child, send email, listen to music and even watch a movie. But cell phones often break down.
Instructions
If a person really likes his mobile phone, he does not go out and buy a new one, but takes the old device to a repair shop. repairs. This is quite a profitable business, because... opening it does not require huge financial resources. Moreover, if you have a desire to repair cell phones phones, you can do without special certificates or installing a cash register.
When you decide to open a repair shop, the first step is to establish yourself as an individual entrepreneur. After that, find an office, necessary equipment, and masters. It will be great if you can repair your mobile phone yourself, because... no need to pay employees.
Etc.). Unlock the screen, and then press and hold the power button for a long time. A menu will appear. Select the item “Turn off” or similar (depending on the firmware version). Do not confuse it with the “Reboot” item. A new menu will appear. In it, select “Yes”, “Turn off” or similar. Wait until the device turns off completely.
Turn the phone with the screen facing you, the USB connector down, and the headphone jack and power button facing up. On the left side wall you will find a lever. Pull it towards the top wall, where the headphone jack and power button are located. The back cover and you can remove it.
The battery is non-removable, so you won’t find it under the cover. Therefore, make sure that the power button is not accidentally pressed when the cover is removed, since it is not advisable to change SIM cards and memory cards. But in the compartment there will be two slots for SIM cards, as well as one slot for Micro SD. In option HTC One, designed for one SIM card and without a cover, the installation of a memory card is not provided.
When installing SIM cards, choose correctly which one to install in which slot. One of them (the top one) allows you to use 3G, but the second one does not. The one you are going to use to access the Internet must have an unlimited connection, and it itself must be in home region. Map Micro memory SD can be up to 64 gigabytes.
After installing the SIM cards and memory card, replace the cover. Turn on by long pressing the power button. Wait for the Android operating system to load. Reconnect if necessary peripherals. Continue using your phone.
Modern mobile phones are becoming more and more functional. Every year, companies release several dozen new models, which are difficult to understand. HTC offers Russian buyers just over 20 smartphone models.
Mobile phones from HTC can be selected according to several parameters: cost, number of SIM cards, depending on the installed operating system, screen diagonal, color, and so on.
The first parameter is cost. The minimum price at which you can purchase a device from HTC fluctuates around 4 thousand rubles. For this amount you can buy good phone with the Android operating system, 3.5 inches diagonal, enough powerful processor, 8 hours of active work without recharging, good picture and great sound in headphones. For example, Desire 200 would be such a good budget model.
HTC Windows Phone
Next budget model, radically different from the previous one, will cost the buyer 7 thousand rubles. This is the price of HTC Windows Phone 8S, whose operating system is Windows Phone. This model is suitable for fashionable girls and active teenagers, since the phone has a bright bottom or back panel: red, blue, white or yellow. This phone has a diagonal of 4 inches, a height of 12 cm and a thickness of only 1 cm. It has a slot for a memory card, a good camera.HTC Desire line
Several series phones HTC Desire have two slots for SIM cards. This type of phone is often chosen by people who do not want to carry several devices with them. The cost of such a device from HTC ranges from 7 to 15 thousand rubles, depending on the model. However, their main advantage is the ability to use two phone numbers. Such models are HTC Desire V, HTC Desire 601. They work on operating system Android have all the advantages of other phones in the line: good sound, picture, battery with large capacity and strict design.HTC flagship
The company's flagship on at the moment is HTC phone One. He works in the operating room Android system, has 4 nuclear processor with a frequency of 2.3 GHz, which allows you to run several applications at once, play games, watch videos good resolution without various gadget freezes. In stock big screen with a diagonal of 5 inches, a memory capacity of more than 10 GB. This phone costs much more than many of the company's models, but it is truly more powerful, ready to work for a long time, the manufacturer claims that you can talk on it for up to 20 hours without recharging.The smartphone has original design, its thickness is less than a centimeter, its height is about 15 cm. This phone is chosen by successful people, for whom their device is not just a phone, but a treasure trove of information: photographs, important notes, music, documents and applications.
Modern electronic device Iphone-4, developed by specialists from the Californian brand Apple, is a fairly well-thought-out device. Along with the software and technical complexity of the implemented solutions, the ingenious assembly determines the practical inaccessibility of the gadget components located in the inside of the case. The question of how to remove the cover from an iPhone 4 is a kind of mystery for some users, since the process of dismantling the back of the panel involves the use of a special tool and requires knowledge of the design features of the case.
Threat to "presentability"
Due to intensive use of the mobile phone appearance he loses his “authority”. Most often, the rear panel suffers. Abrasion and mechanical damage tend to aggravate visual perception, as a result of which a completely logical question arises about how to remove the cover from the iPhone 4. Precisely in order to replace it and return its former beauty to the much-loved tempter of user hearts and connoisseurs of the “Apple” brand.
From simple to complex
Before you begin the actual disassembly, you need to have some tools. In particular, you will need an Apple screwdriver in the shape of a star and a new copy of the case, or rather the back of it. That’s probably all that will help you understand in practice how to remove the cover from an iPhone 4 and install a new one. It is worth mentioning that the body of the device is made of high-strength glass, which cannot guarantee 100% protection against careless actions. At the same time, the glass has fixing structural elements, which at the time of installation must be positioned along the guides, because if one of the locks is damaged, the appearance of gaps on the body is inevitable. So be careful.
How to remove the cover
- "iPhone-4" is equipped with two fixing bolts with a star profile, which are located at the bottom end mobile device. They need to be unscrewed.
- Then slide the cover and pry it up.
- Install a new panel.
Agree, replacing the back cover of an iPhone 4 is a fairly simple process when dismantling is carried out using a special tool, otherwise a situation is inevitable when the user removes the bolt profile slots and further actions disassemblies become difficult to implement. It is advisable to purchase this screwdriver, and you can buy it in a special store that sells equipment and components for mobile phones. Ordering online is also quite feasible.
In conclusion
Now your knowledge of how to remove the cover from an iPhone 4 frees you from a sometimes obligatory visit to a service center in order to replace the back panel. At the same time, the color palette reverse side you can change the housing whenever you want. It should be noted that it is easiest to disassemble and install new smartphones iPhone generations. The simplicity and ideal arrangement of components allows one to quickly resolve various issues related to operational issues.
iPhone 5s users, after several years of active use of the device, sometimes try to disassemble it. At the same time, it is not enough to figure out how to remove the cover from an iPhone; you need to be able to navigate the “stuffing” of the device. How to disassemble iPhone 5S - one of the most popular versions mobile gadgets from Apple - see step by step instructions below.
If you are wondering how to disassemble an iPhone 5 and change the case, you need to prepare special tools. Every home probably has its own set of miniature screwdrivers, but they won’t fit. Replacing the case on iPhone 5, 6 and other versions of Apple gadgets requires the use of special tools that can be easily found in online stores. That's what they're called - iPhone disassembly kits.
Replacing the case on an iPhone 5S will require the use of the following 4 tools:
- Pentalob - five-blade screwdriver.
- Phillips screwdriver.
- Vacuum suction cup (without a suction cup, replacing the case on the iPhone 5C is unlikely to be possible).
- Plastic spatula (or something similar).
How to disassemble iPhone 5 and how to open the iPhone cover
In iPhone 5, replacing the case is possible not only in conditions service center. You can easily use iPhone 5 at home, as well as other, more advanced models - 6, 7.
iPhone 5C model disassembly, steps:
- The first step is to unscrew the screw at the bottom of the gadget’s body. Devices version 5 and higher use so-called pentabolt bolts to prevent the user from disassembling the phone themselves. Earlier models used Phillips screws.
So, you need to unscrew the two screws at the bottom of the phone panel. If you don’t have a special screwdriver, you can use a flat tool, sharpening it on the sides. But keep in mind that if you do not use tools specifically designed for disassembling the iPhone, the bolts may be misaligned. Therefore, before disassembling the device, stock up on additional Phillips head bolts.
- Take a vacuum suction cup and lift the screen, carefully helping yourself with a spatula. What is a spatula used for? To avoid damaging the screen. So, for this purpose you could use a screwdriver, in which case the chances of damaging the display would be increased.
- Carefully lift the screen from the Home button side.
- Again use a Phillips screwdriver and remove the two bolts that secure the screen. Using a spatula, divide the body into 2 parts.
- Unscrew Home button. And then remove it from the device.
- At the top of the smartphones there is a camera, speaker and proximity sensor. But before doing this, you need to carefully remove the mounting plate.
- Then you need to finish disassembling the front panel by removing the metal protection.
- Now you can start disassembling the iPhone case. And the first thing you need to do is remove the battery so as not to expose yourself to the danger of electric shock. To do this, you need to disconnect the cable from the board. This is done using the same shovel.
Keep in mind that the battery is glued and requires some effort to remove it from the phone. However, securing the battery with glue is not strong, and even with light force the battery will come out of the case.
- Get the camera. This is quite easy to do, since, unlike the previous smartphone model from Apple, the camera is not attached to the body in any way.
- Extract motherboard. To do this, you need to unscrew the screws and contacts under the rear panel. Here you can see that the board is attached quite firmly. But after unscrewing the bolts, it is easily removed from the device.
- Delete protective film processor and remove it.
- Remove from the device Wi-Fi antenna, headphone jack, speaker. All parts are attached to the body sufficiently a large number glue. To remove them, you need to carefully remove the adhesive mass.
- Remove the remaining parts - Wi-Fi antenna, similar GPS device, vibration motor for bell.
- That's it, the procedure called iPhone 5 disassembly, and the answer to the question of how to open the back cover, are completed. By remembering these simple instructions, any user will be able to understand how to replace the case on the iPhone 5s. You can assemble the iPhone 5S case by following these same instructions in reverse order. When you turn on the gadget after assembly, you will need to unlock the device by entering a password.
This is what a completely disassembled iPhone 5S looks like:
As you can see, disassembling the iPhone 5 with your own hands is not a very difficult task, and can be done by anyone who has at least a little knowledge of technology. Replacing the case on the iPhone 5, when necessary after it is damaged, which often happens after 2-3 years of use, can also be done by the owner of the gadget himself. But if you are afraid of damaging some parts of the iPhone case or its internal elements, it is better not to risk removing the back panel and opening the “filling”. Let the case of iPhone 5, 6 or another version of the gadget be replaced by a service center specialist.
Replacing the case on iPhone 5: errors
If replacing the case on iPhone 5 and later models - 6, 7, etc. is carried out not by a specialist, but by the user himself, various types of errors may occur that can disrupt the functionality of the gadget. To avoid them, you need to familiarize yourself with the basic rules before disassembling the device.
In a situation where the replacement of the iPhone 5C case will be done by the device owner himself, the following must be taken into account:
1 If the owner has firmly decided to change any part of his gadget, he must be sure that he has the necessary knowledge and skills, and also carefully study the instructions for disassembling the iPhone. This rule must be followed regardless of which version of the gadget will be disassembled - the fifth iPhone, 6, 6S or others - older or newer versions. If you have the slightest doubt, it is better to use the services of a professional technician. 2 All work must be carried out carefully and slowly. The parts inside the iPhone are very fragile, and any careless movement can cause them to break.