Command to view the motherboard. How to determine the motherboard model (different ways)

With this lesson I begin a small series of articles on the topic of defining computer equipment. Now we’ll talk about how to find out what motherboard is on your computer. I decided to start this series of lessons with it, because the motherboard is one of the main parts of any computer, it is what connects all parts of the system together.

Method 1: determine the motherboard via the command line

According to our portal Lynchakin, best way find out the motherboard model computer, use the command line for these purposes.

Find out the brand of the motherboard through the Windows command line:

1. and enter the following code into it:

wmic baseboard get manufacturer

2. Press Enter.

In a similar way, we find out the model of the motherboard:

1. Now enter the following code into the command prompt:

wmic baseboard get product

2. Press Enter.

This is what it looks like:

Tip: If in your case these commands do not work, repeat the steps above.

The main advantage of this method is that it is more reliable than the System Information utility. We will talk about it further. It also does not require downloading or installing anything. additional programs.

Method 2: Using System Utility

The Windows operating system has a built-in "System Information" utility, which makes it possible to view many parameters of the computer, including what motherboard is on it. To open this program follow the instructions below.

1. Press the hot keys +R, and in the window that appears, enter the command " msinfo32", then click OK.

The "System Information" utility will open, where you can see what kind of motherboard you have. The elements we need are called "Main Board Manufacturer" and "Main Board Model". They are located approximately in the middle of the main list of parameters.

This option is not bad, but there is a problem, it does not always work. In my case this is what happened, the motherboard model is not detected.

Method 3: look manually

This may sound strange to some, but this is one of the easiest and most reliable methods to find out the motherboard model. Take it and open the side cover of your system unit and see the manufacturer and model of the motherboard.

Important: Do not hide the system unit of your computer while it is under warranty! Once the seal is broken, it is cancelled.

Below is an example of an Asus motherboard.

This method is reliable, but for many it may be inconvenient or impossible due to warranty.

Method 4: Using Third Party Utilities

And finally, of course, you can find out what motherboard is on your computer thanks to third party programs. Among the most popular, in our opinion, are the following utilities:

• Speccy
• AIDA64
• CPU-Z

As you can see, there are quite a lot of options to find out or check the motherboard model. Also, if possible, you can look at the purchase receipt, warranty card, or the box from the board itself.

If your personal computer or laptop does not work due to lack of, or outdated version drivers, or it has sound problems, it's easy to fix. But only if you know the motherboard model and its exact name.

The motherboard model can be found in the documents. But if you threw away the box with them after purchase or they do not indicate the model, you will have to use other options. One of the methods listed below will help you determine your motherboard model. Four ways:

1. Use utilities or applications specially designed for this purpose to determine;
2. Use the command line if you have Windows 7, 8 or 10;
3. Open the system unit and inspect motherboard;
4. Use the system utility for Windows 7, 8 or 10.

Special programs for viewing PC characteristics (including motherboard)

Speccy

AIDA

But to fully use it, you have to pay. The trial version does not have advanced functionality and is limited to only a few parameters.

Visual inspection of the motherboard

If the manufacturer of the motherboard that is installed on your computer ASUS company, then you will see, for example, the following marking: “ASUS 970 PRO GAMING / AURA”. Feel free to write this name in the search engine and update outdated drivers.

How to find out your motherboard model on the command line

The command line opens in two ways:

cmd and press the Enter key.
cmd and press "Enter" key

• wmic baseboard get manufacturer;
• wmic baseboard get product.

How to determine the motherboard model in Windows 7, 8 and 10 without programs?

And, even if the drivers were installed automatically or using specialized programs, you will not be able to upgrade your computer without knowing anything about the motherboard.

Search for packaging and receipts

The first way, the simplest and most commonplace, is to search for instructions and equipment boxes.

If the packaging has not yet been thrown away, it should indicate the board model and a number of other information.

If the box is no longer there, you can use such sources of information as:

• A sales receipt (not to be confused with a cash receipt), on which the full name of the equipment is often written.
• Warranty card for equipment.

Advice! The coupon should be kept in any case, even after the warranty expires - sometimes it contains addresses and phone numbers of services where the board can be repaired in case of a breakdown.

• Installation discs. Often they are designed for several board models, but sometimes they are designed for only 1-2. And at least you will have an approximate name.

Visual method

In order to determine the board model on a computer visually, you will need to turn off the power, find a suitable screwdriver and provide sufficient lighting.

1. Unscrew the bolts from the side cover of the system unit. Sometimes there are two of them and both are removed. In this case, you will most likely want a lid that has fewer holes for ventilation.
   Or the opposite one, which heats up the most when the computer is running;
2. After removing the cover, look at the board markings. It is not always in a visible place. Often the “motherboard” is labeled PCI-E slot or the processor.
3. As can be seen from the image, the name of the board in in this case H61MV-ITX. It is he who will have to be driven into search bar browser to search for drivers or specifications.

The above method cannot be called convenient and safe.

Firstly, because the system unit may be under warranty, and after opening the case it will most likely be invalid.

Secondly, others may interfere with finding the name of the board installed devices, and it’s better not to remove them without experience.

Thirdly, there are other options to find out the name of the board.

Using Windows Tools

One of the simplest and quick methods board name definition is to use command line to call system utilities.

This will not require installing additional programs, but simply executing following instructions:

1. Open the “Run” menu (via “Start” or by pressing the “Windows” + “R” keys);
2. Enter the command wmic baseboard get Manufacturer (getting the name of the manufacturer, for example, ASUSTek) and wmic baseboard get product (gives the board model, for example, P8H61-MX).

Another utility from Microsoft has similar functionality, launched through the same command execution menu. Only msinfo32 is entered in the window.

In the window that opens, you can find the characteristics of your motherboard. The parameters in the list may be in a different order and even English.

However, as you can see, sometimes this method does not help determine either the manufacturer or model of the board.

However, the same as the previous option, using other commands. Therefore, it is possible that to determine the name of the “motherboard” you will have to download and install additional software.

Software Definition

Using the software, determining the board parameters is quite simple.

The problem can only arise if missing drivers prevent you from connecting to the Internet.

You can prevent this situation by writing the appropriate programs to a disk (not the system disk) in advance.

CPU-Z utility

CPU-Z program will allow you to get all the information about the processor and board in a few seconds. Download it from the official website of the manufacturer.

Having opened the program and going to the Mainboard tab, look for the necessary data in the Manufacturer and Model lines.

Very often, many laptop owners are concerned about how to recognize the motherboard on a laptop. This information may be needed when replacing equipment, installing new components, or even when trying to self-flashing primary input/output systems BIOS and UEFI. Finding a solution is clearly puzzling for some users. Meanwhile, there is nothing particularly complicated here, and you can use it completely to obtain such data. different methods, including native operating system tools, specialized programs diagnostics and online resources of manufacturers of equipment of this type. Let's look at some of them.

How to find out the motherboard model on a laptop in the simplest way

The most primitive, but far from the most best method, which many are accustomed to using, is to disassemble the device yourself, and then just look at the product labeling. Yes, it looks simple, but in the process of disassembling the laptop you need to be extremely careful, since rough intervention can damage some important components both the motherboard itself and the equipment installed on it. Therefore it is better to use software methods.

Information about the manufacturer and model of the laptop in the command line

To obtain brief information about the manufacturer and model, you should use the tools command console. And first, let's see how to find out on a laptop. To do this, in the console, which does not necessarily need to be run with administrator rights (you can call it in Windows 10 via RMB on the start button or enter the abbreviation cmd in the “Run” menu), you need to enter the command wmic baseboard get manufacturer, after which it will appear necessary information.

In the same way, you can easily find out the model of your own laptop by writing the line wmic baseboard get product. Please note that this is indeed very brief information. More information There is no way to find out using this method. However, Windows still has plenty of native tools.

Using system information

System information is perhaps one of the most interesting tools that can provide information on all hardware and software installed on a computer (laptop). How to find out the motherboard on a laptop?

To do this, in the program execution console (Win + R), you need to enter the abbreviation msinfo32, and then go to the main section and look at the items for the manufacturer and model of the device you are interested in. The disadvantage of this method is that sometimes the manufacturer may be indicated, but the name or model number will not be available. How to find out what motherboard is on a laptop in such a situation? To do this, you can use another tool - DirectX platform dialog information.

Getting Information Using the DirectX Dialog

To call up the dialog, use the same “Run” menu and enter the dxdiag command in it, after which a window with several tabs will appear. By default the tab opens first general information, which should be used.

There will also be little information here, but among them you can find the manufacturer and model of the laptop (it will be indicated in the computer name field).

Using Third Party Software

As you can see, most of the information looks far from complete, but many users also need some additional information. Unfortunately, Windows systems cannot provide it. You can, of course, use BIOS settings, but this will not give the full picture. Thus, speaking about how to find out the motherboard on a laptop, the optimal solution to get the maximum detailed information will be the use of third-party diagnostic utilities. For example, programs like AIDA64 and Speecy have proven themselves well. But the first application is paid and provides too many parameters that an inexperienced user may simply not understand.

But the second program has a clearly user-friendly interface and provides mostly only basic indicators, despite even some advanced data. But it’s quite difficult to get lost in them. Everything is simple and concise!

Identification of equipment on manufacturers' websites

Another solution related to how to find out the motherboard on a laptop is to use the Internet resources of laptop manufacturers. So, for example, on the official website of Dell Corporation, even if you don’t know exactly the nomenclature name of your own model, on home page support service, you can click the special “Detect PC” button or immediately go to the diagnostics section. In any case, you will be prompted to download the special client utility SupportAssist in the form executable file, which you need to save on your hard drive in any convenient place. After saving the file, you need to run it as an administrator and wait until the application completes the installation necessary components.

After the main applet starts, it will be possible to either perform a full scan of the hardware (and even identify possible problems in his work), or simply hover the cursor over the field in the upper right, after which it will display brief information, which includes special service codes, from which you can obtain the necessary information.

How to find out the motherboard number on a laptop using an Intel hardware detector

However, the above method looks somewhat complicated, and not every user will be able to figure it out. Therefore, let's use a similar one on a laptop software product from Intel Corporation. The program in the form of a single executable file SSU.exe must be downloaded from the company’s official website, and then run the portable application and check the boxes to scan the equipment. How to find out the motherboard on a laptop in this program? Nothing complicated!

Simply check the appropriate box in the Motherboard menu located in the central part of the window, and then click the Scan button.

At the end of testing, the name of the manufacturer and board will appear in the results window. If desired, in the third step of the check, you can use redirection to the support service to resolve possible problems in the operation of the laptop hardware (the redirect will be made directly to the desired section official resource, which will open in a new tab in the browser installed as the main one in the system by default).

What's the best way to use it?

As we can see, the methods used to obtain information about all components computer system, differ quite strongly from each other. However, if you approach the consideration of user actions from a practical point of view, of course, the easiest way is to use a special, narrowly targeted software, which will provide maximum information on the equipment the user is interested in, which can also be useful when additional settings devices or even when overclocking the CPU or GPU.

After some time, the computer needs an upgrade. Some users prefer to upgrade by purchasing a new computer, others replace old components with new ones.

Before purchasing new PC components (video card, processor, RAM and others) you need to know the characteristics and model of the motherboard. This is necessary to avoid component incompatibility.

Physical examination

To physically inspect the installed motherboard, it is necessary to disassemble the system unit.

In order to disassemble the system unit, you must:

This method is suitable for owners of desktop computers.

Important! Motherboard manufacturers "ASUS" write the model name near the "PCI-E" connector, the manufacturer "GIGABYTE" places information about the board near the RAM slot, the manufacturer "MSI" as well as "ASUS" most often place information near the "PCI-E" connector "

Windows Standard Tools

If the user, due to inexperience, cannot disassemble the system unit and see which motherboard is installed, then you can use standard means operating room Windows systems, such as: BIOS and command line.

You can also use standard utilities operating system.

To use the System Information utility, you must complete the following steps:

Important! Standard utility"System Information" may not display information about the motherboard.

You can also use the standard one to establish the model. Windows utility"DirectX Diagnostic Tools".

To use the DirectX Diagnostic Tools utility, you must complete the following steps:

Important! Data may not be displayed. In this case, the “Computer Model” item will contain the “System Product Name” information.

Another standard method Model definition is PostScreen check. Post check occurs when the computer starts.

Important! Modern computers pass the Post check almost instantly, so such a screen may not be displayed when the PC starts.

Video: information about bios, motherboard and processor

Via Bios

You can find out the motherboard model through the BIOS.

In order to find out the motherboard model through the BIOS you need to:

Method two:

Command line

One of the most simple ways Finding out what motherboard is on your computer is through the command line. The user is not required to install additional software, just call the command line window.

To determine the motherboard model via the command line you need to:

First team "wmic baseboard get Manufacturer". Using this command you can determine the manufacturer of the motherboard;

Second team "wmic baseboard get product". Using the command, you can directly determine the motherboard model;

• then all that remains is to enter the desired command.

The second method looks like this:

The third way to define using the command line looks like this:

Let's find out what motherboard I have on my computer in Everest

You can find out the motherboard model using specialized software. Everest (today the program is called AIDA64) allows you to perform an in-depth analysis of a personal computer.

With Everest you can find out about technical specifications PC, test the processor (CPU), video card (GPU), RAM. Everest allows you not only to find out the characteristics of your computer, but also to update system drivers, providing download links to official pages manufacturers.

Important! The program is distributed free of charge and has a trial period of 30 days.

The trial version of the program has significant functional limitations.

To find out the model and characteristics of the motherboard in the program you need to:

You can also determine the Everest board model:

The everest program is the most effective in determining the model and characteristics of the motherboard.

This article discussed ways to determine the motherboard model. You only need to choose the most convenient method.