• Installing Windows on a netbook: how to do it right? Installing Windows on a netbook

    In case you want to install Windows 7 on a netbook with another pre-installed operating system or you need to reinstall the existing one copy of Windows 7, you can fulfill your intention with several in various ways depending on whether you have an external DVD drive, a Windows 7 DVD, or a genuine Windows 7 disk image purchased from Microsoft Store.

    Checking your netbook's readiness for Windows 7

    If you purchased a netbook with an operating system other than Windows 7, and your netbook does not have the appropriate certification logos, you should check it for compatibility with Windows 7. To do this, you can use the Windows 7 Upgrade Advisor.

    Migration Advisor is a one-stop tool for identifying potential hardware and device issues that may arise during installation and Windows work 7. In addition, the Transition Advisor will notify you of any additional Windows features 7 will be available on your netbook.

    Booting your computer from an external device: DVD drive or USB flash drive

    Typically, most netbooks do not have an internal DVD drive. To install Windows 7 on such a netbook, you will need to resort to either an external DVD drive or a bootable USB flash drive (“flash drive”). In both cases, you will need to boot the netbook from an external device.

    Features of setting up a netbook to boot from external devices are determined specific model. To receive additional information Consult your netbook's documentation, its manufacturer's website, or the Installing and Reinstalling Windows 7 and Running Windows from a CD or DVD pages.

    Installing Windows 7 on a netbook using an external DVD drive

    If you have an external DVD drive, you can install Windows 7 from installation disk.

    You can install Windows 7 on a netbook from an installation disk using an external DVD drive

    To do this:

      Connect an external DVD drive to your netbook. Typically, a USB connector is used to connect an external DVD drive to a computer.

      Insert the Windows 7 installation disc into the DVD drive.

      To update previous version Windows before Windows 7, start the Windows 7 installation process from an existing one operating system. For complete reinstallation existing operating system, boot the netbook from the Windows 7 installation disk. Read more about installation and updating.

    If you don't have an external DVD drive, you can also install Windows 7 from an installation disc at your local computer store.

    Installing Windows 7 on a netbook using a USB flash drive if you have a Windows 7 installation disc

    You can create your own bootable usb drive using c files boot disk Windows 7. For this you will need:

      USB flash drive with a capacity of 4 GB or more.

      Windows 7 installation disk.

      Computer under Windows control Vista or Windows 7 equipped with a DVD drive.

    Preparing a USB flash drive

    Before you can create a bootable USB flash drive, you need to format it. Please note that formatting will erase all data contained on the flash drive.


    Format the USB flash drive

    Creating a Bootable USB Flash Drive

    After completing these steps, you can move on to creating a bootable USB flash drive. To do this:


    Add bootable Windows code 7 to your USB flash drive

    To complete creating a bootable USB flash drive, you need to copy all the files from the Windows 7 installation disk to your flash drive. To do this:

      Through the “Computer” window, find and open the DVD drive with the installation Windows disk 7 and USB flash drive.

      In the DVD drive window, select all the files contained on the disc, right-click on any of the files and select “Copy”.

      Go to the window of your USB flash drive, right-click on an empty space in the window and select “Paste.”

      Wait until the file copying process finishes.

    Installing Windows 7 on a netbook using a USB flash drive if you have the original Windows 7 ISO image

    A blank USB flash drive with a minimum capacity of 4 GB.

    To create an installation USB flash drive, follow the instructions below:

    Download the Windows 7 DVD/USB Download Tool application (page on English) from the Microsoft Store website and install it on your netbook.

    Launch Windows 7 DVD/USB Download Tool.

    Specify the path to the installation disk image. To do this, click the “Browse” button and find the corresponding file ISO image on your computer. When finished, click the “Next” button.

    Click the “Browse” button and find the image file on your computer

    After selecting the image file, click the “Next” button

    Select the appropriate recording media. To create an installation USB flash drive, click the “USB device” button.

    Select “USB device” to burn the Windows 7 image to a USB flash drive

    Specify the USB flash drive to write to (the “MY FLASH DRIVE” drive in the image below). After selecting the flash drive, click on the “Begin copying” button to start recording.

    Select your USB flash drive from the drop-down list

    If the flash drive is not connected to the computer, a window will be displayed informing you that compatible devices USB not detected (No compatible USB devices detected).

    If a USB flash drive is not connected, the application will notify you that compatible USB devices not found

    In this case, connect the USB flash drive and click on the “Refresh” button located next to the drop-down list.

    Please note that during recording, all files contained on the flash drive will be deleted. To continue, click the “Erase” button USB Device”.


    Windows 7 DVD/USB Download Tool will burn the Windows 7 installation image to your USB flash drive

    Once this process is complete, you can use your USB flash drive to install Windows 7 on your netbook. To complete the installation, you will need to boot your netbook from a USB flash drive.

    Once the burning process of the installation USB flash drive is complete, you can use it to install Windows 7

    Hello dear readers.

    There are several form factors of computers that are very popular today: stationary, tablets, laptops and netbooks. The latter stand out for their extremely compact dimensions, but at the same time they have a permanent keyboard. Such devices are devoid of elements that are usually rarely used. For example, there is no DVD drive, which means certain problems may arise if you need to read discs. In particular, later in the article I will tell you how to reinstall the system on a netbook. In this option, there is only one method, which will be discussed.

    In general, the entire process can be divided into several important stages. And the first thing is to prepare the computer itself, or rather the documents on it.
    Regardless of the manufacturer and model of the device, be it Samsung or HP, it is better to have several partitions on one hard drive. This will help in similar situations to save all the necessary data.

    Therefore, we simply copy the necessary elements from the desktop, as well as from the folder “ My documents” on where the information is stored, as all of the above areas will be deleted.

    In addition, it is advisable to have drivers for essential elements, with the help of which you can, if necessary, restore everything else. And this is network card. Just go to the manufacturer’s official website in advance, indicate your device, for example, Asus Eee PC, and download the appropriate files for the corresponding future operating system.

    For Windows installations 7 or more new version, you need to prepare an installation image. Be sure to first determine the bit depth of the OS. If you have installed RAM, the total volume of which does not exceed four gigabytes, you can safely opt for x32. But if there are six or more, you need to use x64.

    In addition, you need to have portable memory - an eight gigabyte flash drive. If you take it with a smaller size, not every distribution will fit. This is especially true for Windows 10. And too large ones may not be perceived by the system.

    To record an image on a portable device (since only this method is suitable without a disk drive), you must also have a special software, because you can’t just transfer files. Perfect for this process Windows USB/DVD Tool. The program is easy to use. To place the required distribution on portable memory, you need to perform a number of actions:


    Installation( )

    It must be said right away that we will be engaged in the clean deployment of the new operating system. This is not restoring from a backup. The last option implies quick transfer all parameters of the operating system, drivers and programs that were already on the computer at the time of creation.

    The process itself is simple. The main thing is to perform all the steps step by step:


    The action will end with a few simple questions. Here you need to specify your username, password (if necessary), license key and some other points.

    It is advisable now to reboot, go into the BIOS and set it to start with hard drive. You can take out the flash drive and put it aside.

    Further customization( )

    The main thing you will need during the further use of the device (regardless of whether it is Acer or Dell) is all the working elements. And for this you definitely need drivers.

    Typically, the operating system, be it the seventh version or the tenth, provides a minimum set of the above-mentioned programs. But not all of them always coincide with the configuration of the netbook.

    Now we try to open access to the Internet:


    As a result, you should now be connected to the Internet. This will help you take the following steps:

      Again we go to " Control Panel" Only now let's go to " Update Center».

      A window will open in which we are interested in “ Examination…" Let's launch it.

      As a result of this there will be additional packages, which were released by Microsoft, as well as some missing drivers.

    Completion of the process varies. So, for example, you can go to " device Manager"and see which components are opposite the interrogative and exclamation marks. Next you go to official website netbook manufacturer and download all suitable programs.

    Details Updated January 27, 2017 12:56 Published January 27, 2017 11:02 Author: nout-911

    Installing Windows on a netbook: how to do it right?

    After purchasing a netbook, it may be necessary to install an operating system on it - the gadget may be sold without it, or the user may want to install a different OS. Installing windows on a netbook more difficult than desktop computer or a laptop due to the lack of a disk drive. But still, a solution exists, and almost every user can use it.

    Installing windows on a netbook - a step-by-step guide for beginners

    In order to install an operating room Windows system on a netbook, you will need the following:

    1. Memory card or flash drive with a memory capacity of at least four gigabytes.
    2. Operating system (you need an ISO image, to create which you can use special program or download finished image required version operating system).
    3. Program for creating boot drive to install the operating system.
    4. A little patience.

    If the netbook already has an operating system installed, you should do backup copy everyone important files. If the system is not installed, to create boot image You will need another working computer.

    Installing Windows on a netbook: original image or build?

    Experts strongly recommend installing the original version of the operating system, and not the assembly. Despite the apparent advantage of the assemblies - the presence of drivers and minimum set additional software, they carry a certain danger in the form unstable work and the presence of malware. Therefore, it is better to install the original operating system, and install the drivers and necessary software manually.

    Step 1 – Disk and Media Cleanup

    Before you start creating a boot image, you must hard formatting laptop disk, dividing it into the required number of partitions, as well as the media from which the installation will be performed.

    Step 2 – create a bootable USB flash drive

    Next you should create bootable USB flash drive, with which the operating system will be installed on the netbook. There are several free programs for this. Using them is quite easy - just select the required flash drive, specify the path to the image file and follow the instructions on the screen. Capturing the image usually takes only a few minutes.

    In some cases, it may be necessary to integrate SATA drivers into the operating system image, without which it will not install. To do this, you will need the drivers themselves, downloaded from the official website, as well as free program nLite.

    Step 3 – install Windows and necessary software

    To install a prepared Windows OS on a netbook, you first need to boot into the BIOS and select boot from a flash drive in the appropriate option, then select the Save Changes & Exit option.

    Further actions are no different from those performed when normal installation operating system on a desktop computer or laptop - you need to follow the instructions on the screen, and then wait until Windows copies everything necessary files and complete other necessary actions (usually this does not take more than 20-40 minutes, depending on the version of the operating system being installed).

    After installation Windows netbook will reboot. If not at this stage If you do not remove the drive from which you installed, the operating system installation window may reappear after booting. But there's no need to panic. Simply remove the drive and restart the laptop again.

    Now you can start installing drivers from the disk, or by first downloading them from the official website of the netbook manufacturer. The driver installation process may require several reboots. And only after that you can install the necessary programs.

    The easiest way to install Windows on a netbook

    The algorithm of actions described above is intuitive and does not require special skills. But still, difficulties may arise at certain stages:

    • there is no access to a work computer on which you can create a bootable USB flash drive.
    • operating system image files are not working or there is no media on which to burn the image.

    It is very simple to protect yourself from all possible troubles that may arise during the installation of Windows on a netbook - just contact specialists who have been doing this for many years and have all the necessary skills and software.

    Qualified technicians will not only install an operating system on a netbook, but also offer additional services, such as:

    • choosing the version of Windows that will be installed on the gadget with consultation on the most optimal choice.
    • partitioning the hard drive.
    • installation of drivers provided by the gadget manufacturer.
    • installation of the most necessary accompanying programs for the most comfortable start of using the netbook.
    • Tips for maintaining the operating system in good condition.

    Turning to the professionals of NOUT-911 and trusting them installing Windows on a netbook from any manufacturer, you can save a lot of time and nerves by quickly receiving your electronic assistant in fully working order and ready to perform the tasks that will be assigned to it. And all this for a reasonable fee. This is why many people choose this method of installing Windows on a netbook instead of doing everything themselves and being nervous if something goes wrong.

    Netbooks are becoming increasingly popular among the local population of our vast Motherland. Small computer, as practice has shown, is the best birthday gift for the woman you love. Practice pointed even more to the now popular netbook Acer Aspire One 532h in lovely silver or red color scheme, so beloved by our ladies. But what kind of netbook can there be without the beautiful Windows 7 OS installed on it in normal configuration? Of course, none.

    In this article I will talk about the full cycle of installing Windows 7 on Acer netbooks Aspire One 532h, taking into account all the small and unpleasant features of this process.

    1. Creating a bootable image of Windows 7 for netbooks without a DVD drive
    2. Windows 7 installation process
    3. System setup - drivers and loud swearing

    Perhaps this will be the plan. First of all, you will need the actual Acer netbook Aspire One 523h, of which there are two things in front of me now, both are beautiful, silvery twin brothers, although in character it seems that they are still sisters. You will also need a flash drive with a capacity of 4 GB or more. In addition, stock up on the Internet and two hours of patience (with tea, beer and buns).

    How to install Windows 7 from a USB flash drive

    Creating a bootable image of Windows 7 for netbooks without a DVD drive turned out to be not as scary as it might seem at first glance. To install, we need to download two elements:

    1. Windows 7 installation image.
      You can use your favorite distribution, or download this image: (download requires or ). This image will be incredibly useful in the future for installing any of the official Windows distributions 7.
    2. Windows 7 USB/DVD Tool.
      This free utility from Microsoft allows you to easily and quickly create a bootable USB flash drive with installation Windows image 7 if there is an image. You can download: or.

    After you have downloaded both programs, we can begin creating the image.

    1. Format your flash drive. This is not necessary, but I think it will come in handy.
    2. Install Windows program 7 USB/DVD Tool - installation should not cause you any difficulties; even a child can press “Next” several times.
    3. Launch "Windows 7 USB DVD Download Tool" from your desktop. In the window that opens, click Browse, select the downloaded Windows 7 installation disk image file, and click Next.
    4. In the next window, select USB Device. Your flash drive should already be inserted into the computer.
    5. Select your flash drive from the list that appears. You may need to click the refresh button next to the list. Having selected a flash drive, click on “Begin copying”.
    6. Wait for the process to complete, close the program and remove the flash drive - the installer is ready.

    Using the resulting flash installer, you can install Windows 7 on any computer that supports autorun from flash drives.

    The process of installing Windows 7 on a netbook

    Windows installation 7 will be a simple task even for a beginner. You will need installation flash drive from point 1 and your precious netbook. Break the first one with your hands, smash the second one on your head. Connect the netbook to a power outlet, open the lid, admire this miracle of technology, close the lid, admire it some more, and get to work.

    1. Insert the flash drive into the netbook. Yes, yes, this is best done with the netbook turned off, so that when it starts, it will already be detected by the BIOS.
    2. Turn on your netbook. When starting, get ready to press F2 almost immediately to launch the utility BIOS settings. As soon as the message “Press F2 to enter setup” or something similar appears in the lower left, press F2 and get the BIOS setup utility to launch.
    3. In the program that opens, go to the Boot tab, select USB ****** (the name of your flash drive should be indicated here) and use the F5 or F6 keys to move this item to the first place. Go to the last BIOS tab and select “Save an exit setup”.
    4. The computer will restart. This should launch Windows Setup immediately. If this does not happen, turn on your brain and return to point 1.
    5. Follow the onscreen instructions during the installation process. When choosing a partition, I can give the following recommendation - delete everything existing sections and create the breakdown yourself. Most convenient option There will be the creation of two disks of 35 and 110GB, respectively. To delete and create disks, on the selection page, click on “Configure disk”, delete partitions, create two partitions sequentially (when creating the first, specify the size of 35000, when creating the second, agree with the proposed size), select the first created partition (most likely it will be second in the list after the section labeled “Reserved by the system”), click “Format”, and “Next”.
    6. Windows installation will take place in automatic mode. Monitor the state of your computer before the first reboot. As soon as the first reboot begins, use the method described in steps 2 and 3 to return the Boot tab to its original state (that is, move USB *** from the first place to the end of the list), save the settings and continue the installation in automatic mode.
    7. The installation of Windows 7 will end with several questions from the system. Enter your username, computer name, select a password, configure updates and indicate your license key (it is located on the license sticker under the laptop).

    At this point, the first stage of system installation is complete, Windows will turn on, configure itself and provide you with complete carte blanche - proceed further. You can now remove the flash drive and put it aside.

    Setting up Windows - drivers and loud curse words

    After installing the OS, you are guaranteed to notice that something is missing. This something is a pair of drivers, or more precisely, a video driver, wireless network and touchpad.

    First of all, you will need the following driver packages:

    1. Intel VGA Driver - or
    2. Atheros Wi-Fi Driver - or
    3. Synaptics TouchPad - or

    After downloading, unpack these drivers and install them according to the instructions, without being surprised. After installation, you can safely swear - the wireless network driver was not installed. To install it, follow these steps:

    1. Open “Device Manager”, for example, through “Start”, right-click on “Computer”, then “Manage”, and select “Device Manager”.
    2. We find in the manager a yellow icon with the caption “ Network controller", double click, tab "Driver", click "Update", continue the mockery.
    3. When the driver installation wizard appears, select “Manual installation”, “Select driver from the list of providers”, “Show all devices”, and finally “Install from disk”.
    4. In the window that opens, click on “Browse” and set the path to the ndis6xWin7 folder located in WLAN_Atheros_8.0.0.259_Win7x86 where we unpacked it.
    5. After selecting the installation location, a list of drivers will appear in front of us, select Atheros on the left, slowly scrolling through on the right we find the driver for the AR5B95 chip (there is only one with that word, you can’t go wrong). First, I recommend that you check the model of your wireless chip; it is written on one of the labels on the bottom of the netbook.
    6. We agree with the risks, install the driver, and enjoy the wireless network.
    1. First of all, right-click on “Computer” in the Start menu, there “Properties”, from there “System Protection” on the left, and disable system protection altogether. If, of course, you are confident in yourself.
    2. Open “Control Panel” from Start, there “System and Security” and “Check for Updates” in the “Center” section Windows updates", install all the latest updates - this is useful for the system.
    3. Another right click on “Computer” from Start, “Management” and “Services” - find the service there NET Framework(or something similar) and turn it off. Figure out how to do this yourself.
    4. Install an antivirus. You can use free AVG: - or put your favorite one, for example, GCD or Casper.
    5. Think about a firewall, you can use free Comodo Personal Firewall.
    6. Think about the eternal - antivirus and firewall are always stupid and take a long time to install...

    The netbook is now ready to use. Oh yes, I completely forgot to say, now you can forget about the warranty - you just lost it, but this is a small thing compared to the fact that now your netbook starts working 5 times faster than when you bought it!

    Resume

    If you didn't take the opportunity to smash this netbook over your head two points earlier, refrain from doing so now - you've set it up. Well, or almost set up...

    Now think about installing useful software:

    1. WinRar -
    2. K-Lite Codec Pack -

    Do you have a problem reinstalling Windows on your netbook? This step by step guide will help you cope with this task without much effort. Any user, even a beginner, can do this by reading the instructions provided. So, what is reinstalling Windows, and how to do it correctly, without the help of a specialist?

    Installation process

    At this stage we should already have loaded Windows installer and the initial window for the first step of system installation. For different versions Windows steps may vary slightly, but in quality general rule We can give the following recommendation: you should not immediately click next without familiarizing yourself with what the next step is. As a rule, at one of the installation stages you will need to check and, if necessary, specify the correct date, time, time zone, language settings and so on.

    The only step you don't have to dwell on is acceptance. license agreement, which contains standard text, which probably doesn’t make much sense to read.

    It is important not to make a mistake at the stage where you will be asked to select the installation type:

    • update
    • full installation

    We must definitely indicate the second option " Full installation", since we want to do a clean system installation, and not an update of the old OS, as was mentioned at the very beginning.

    After this, a window will open to select the partition where you want to install Windows. Here we can safely indicate the partition on which our current one is installed old system, after which the specified formatting will be performed logical drive. Of course, we have already saved everything important information With system disk and we won’t lose anything during the formatting process.

    After formatting is completed, the OS installation process will begin. This usually takes 30-60 minutes on netbooks due to their low performance, although it can go faster if you have a more modern and powerful computer.

    When the installation is complete, it's new Windows system will ask you to provide your name as well as an optional administrator password.

    You may then need to install additional parameters, such as network setup. Here, in most cases, you can agree with the recommended parameters, so that later they can always be changed from the operating system interface.

    Let me also remind you that Windows will not always be able to find drivers for all devices on your netbook, so you will need to check which drivers were not found and install them for full-fledged work systems.

    Read more: