Installation flash drive using ultraiso. How to make a bootable USB flash drive using UltraIso
You can also use regular means Windows, for example, by recovery, but this is not always possible, so it is much easier to remove old system and install a new one.
To restore you will need a disk or .
Let's look at the process of creating an image using an example Windows entries 8, although “seven” and other operating systems are written the same way.
Step 1. Getting started
To commit further actions You will need to run the program as Administrator, otherwise the system will simply not allow you to do anything.
After you have opened the program, you need to click the “open” menu as shown in the first screenshot and start creating a bootable ultraiso flash drive.
The example shows a prepared . The files themselves are easy to find on the Internet, in particular on torrent trackers. The extension must be ISO, not EXE.
Once you have confirmed the choice of image by clicking the “open” button, a list of used files will be displayed in the right window of the program.
Do not delete or rename anything to avoid any installation errors in the future.
Step 2. Preparing an image for recording
A pop-up window will appear again, once again warning that the data will be deleted. We agree with this and move on.
Now the fun begins - direct recording of the OS. Ultraiso multiboot flash drive started to be created , which will take some time.
The program itself works quite quickly and efficiently, but the system often slows down the entire creation process. Be patient.
Upon completion of the process, a “Recording complete” notification will be displayed in the logs! This means that our flash drive with ready Windows 8 is ready to use.
Since we no longer need UltraISO services, the program can be closed.
When you connect the flash drive to the PC a second time, something similar to the one shown in the screenshot should appear.
Depending on the image, its name may differ from this. The picture shows just an example of the final version.
In order to install the Windows operating system, you need boot disk or bootable flash drive. Almost everyone now has a flash drive, so it’s easier and more convenient to do just that. bootable USB flash drive. There are many methods and programs to create a bootable USB flash drive, for example Windows 7 USB DVD Download Tool. One of the most popular programs is Ultraiso. First, you need to download and install Ultraiso, download to hard drive an image of the operating system that needs to be installed and insert the flash drive into the USB connector. When all this is done, you can proceed:
Launch Ultraiso |
||
|
Launch the Ultraiso program. Please note that it must be run with administrator rights. |
||
Opening the Windows image |
||
|
Now we need to open the image of the Windows operating system, which we will write to a flash drive. To do this, select Open from the File menu. You can also use the keyboard shortcut Ctrl+O. |
 |
|
|
Open the folder with the Windows image, select it and click on the Open button. |
 |
|
Let's start recording the image on the flash drive |
||
|
When the image file is open, select the item from the menu Burn a Hard Disk Image. |
 |
|
|
Select a flash drive to record to Windows image(in my case (E:, 8GB) JetFlash Transcend 8GB), the recording method is usually USB-HDD. When everything is selected, click on the Burn button. |
 |
|
|
All information on the flash drive will be deleted. We confirm this and click on the Yes button. |
 |
|
|
The process of writing an image to a flash drive takes several minutes. You can drink tea :) |
 |
|
Bootable USB flash drive successfully created |
||
|
At the end, a message will appear indicating that the recording is complete. To close the window, click on the Back button, then you can close the program. The bootable USB flash drive has been successfully created. |
 |
|
Era optical disks slowly fades away and is replaced by external media information, flash drives. In this regard, users have learned to create bootable windows flash drives and as it turned out, it is much more convenient. This article is devoted to the topic of creating a bootable USB flash drive for Windows 7 using the UltraISO program.
In general, there are not so few programs for creating bootable flash drives, but not everyone can write the image as it follows the rules bootable media. The UltraISO utility does this very well, which is why I discuss it in my article. For example, you can read the article How to create a bootable USB flash drive for Windows 7 using the Rufus program, by the way, it is also a very convenient utility.
The program is paid, but has trial period, which is enough for us to create a bootable USB flash drive. You can download it on the website http://ultraiso-ezb.ru/.
After we launch the program, it is advisable to run it as an administrator, because the program may not work correctly.
In the window that opens, click on the tab file, where we select the item open.
Our image files should appear in the window on the right.
Now go to the tab where we click the item write down image of a tough disk.
A window will open where in the drop-down list disk drive, select the flash drive on which the Windows 7 installation files will be written , Leave the recording method as USB-HDD+ and press the Record button. To create this kind of drive, it is recommended to use a flash drive with a capacity of at least 4 GB.
A warning window will appear indicating that all information stored on the disk will be deleted, agree and click the button Yes. Before creating a bootable USB flash drive, do not forget to check if the necessary files are there.
The process of creating a bootable Windows 7 flash drive begins. We wait a few minutes.
At the end of the process, a completion message will appear, press the button back and close the program.
ABOUTGive your opinion about this article, and of course, ask your questions if something suddenly goes wrong for you.
Thank you for your attention!
Creating a bootable USB flash drive using UltraISO is the easiest way to record a Windows installation. And, perhaps, the fastest. Just a couple of minutes and you’re done (provided, of course, that you have a normal PC).
Before you start, you need to install the program. You can download it from the official website (link).
How can I create a bootable USB flash drive using UltraISO?
You just need to follow the following instructions:
- Launch the program (you need to run it as an administrator).
- Next you need to open the installation image Windows file, which you want to record. To do this, select File – Open (or you can click Ctrl keys+ O).
- Specify the folder in which the Windows image is located, select it and click the “Open” button.
- If you did everything correctly, it should look like this:
- Now let's start recording. To do this in top menu you need to select the following items: Boot – Burn image hard drive.
- Next, select your flash drive, leave the recording method the same – USB-HDD+ and press the “Record” button. IMPORTANT! This will delete all your data on the USB flash drive. Therefore, before performing step 6, it is recommended to save all files (for example, to a computer).
- Actually, the program will warn you about this. If you have saved all the data (or you do not need it), agree and click the “Yes” button.
- The recording can last from a couple of minutes to an hour (or even more). It depends on the power of your PC or laptop.
- After the recording is completed, the program will inform you that the process has been completed successfully.
If you do not have a Windows image, but have a licensed installation DVD, then you can make a bootable USB flash drive using it
To do this, in the 3rd step you need to indicate the path to the drive where the DVD is located by selecting the items: File - Open DVD.
Creating a bootable USB flash drive from a folder with files
Finally, there is another way to create a bootable USB flash drive in UltraISO. It is suitable if a licensed digital copy is already saved in a folder on your computer.
To record installation files to a USB flash drive, you must do the following:
After some time, the bootable USB flash drive will be ready.
P.S. If for some reason creating this bootable USB flash drive in UltraISO did not work (an error appeared or something else), try repeating the procedure, carefully following the instructions. As a last resort, you can always write it with another program - fortunately there are plenty of them.
To date USB flash drives have begun to gain popularity and have almost replaced CDs/ DVD disc and, surpassing them in capacities that already reach sizes from 2 to 128 GB and more, they have become compact and easily fit into your pocket. Thanks to the increase in their volume, it became possible to install Windows any versions from a flash drive. More recently, this was found only on netbooks, but now the lack of optical drives has appeared on laptops as well. It seems to me that many owners of laptops without a disk drive have already encountered the same question of how to write a Windows image to a flash drive, trying to simply copy the contents to a flash drive, but as a result they did not get the expected result since the copied information simply to a flash drive was not bootable. Thanks to this article we will find out how to create a bootable USB flash drive with any bootable software including Windows of any version from the image using the program Ultra ISO.
To create a bootable USB flash drive with an operating Windows system 7, 8, 10 we will need desktop computer The UltraISO program itself, which we download from the official website after downloading and installation, will work in demo mode, but to create a bootable USB flash drive, this will be enough for us. And most importantly, the disk with Windows installation, or if there is none, then its image is pre-created on a computer.
And most importantly, that same USB flash drive where the self-booting disk image will be written. Recommend in in this case use a flash drive of at least 8 gigabytes, since after recording the image we will add drivers and programs to configure the PC there.
A simple method to create a bootable Windows USB flash drive
Why is it simple, because in a few steps we will create our flash drive using the bottom method, which will serve as an assistant for Windows installations. To create a bootable USB flash drive we need:
Open the previously downloaded UltraISO program, then select “File” at the top, select Open from the drop-down menu or simply press the combination quick buttons(Ctrl+O). A window will open where we will find and select a pre-prepared image with Windows or a disk drive with Windows disk and select it, click open as shown in the picture.
Our next step after we have opened our Windows image, in the main window, select the “Boot” section, if the VAZ has an English version (Bootable), in the drop-down menu, select the “Write a hard disk image..” section, if the English version is UltroISO then (Write Disk Image...). Before clicking, remember to insert the flash drive.
After inserting USB flash drive and clicked on the button (Burn hard disk image...). A window appears in which we select our media
Disk Drive where the image of the self-booting flash drive will be written, below in the same window we select the recording method like this USB-HDD.
After all the steps, be sure to click on the button below to format the flash drive. After clicking, a window with formatting options will appear, specify file system(NTFS) and confirm our actions by clicking on the “Start” button.
Now the setup and formatting is complete, all we have to do is click on the “Record” button if the English version is (Write).
If you have reached this description, this means that you have waited for the recording process and it has ended, for which I congratulate you. You yourself were able to create a flash drive with which you will now install Windows on your netbook or laptop without an optical drive. A small recommendation, so that you don’t have to shove the flash drive here and there, load the drivers for your device onto it into separately created folders, software, which you will use every day after Windows installations"codecs, player, office programs,archivists".
Now you can reinstall at any time operating system on your own without help unauthorized persons, if your finances allow it, then take away this bootable USB flash drive and use it only when reinstalling Windows. I wish you good luck in this interesting business!