• Windows 10 installation file on a flash drive. Preparation and characteristics of the flash drive. Which flash drive is best for recording a Windows image?

    Hooray! It's finished! Finally, Microsoft is concerned about the convenience of users. Finally, creating installation flash drives has become as easy as copying files from disk to disk. You no longer need to rack your brain with complicated programs and incomprehensible instructions: the “ten” has learned to do everything itself.

    Read how to create a bootable Windows flash drive 10 three in the simplest ways: two new ones and one inherited from Windows 7.

    The method couldn’t be simpler: Ctrl+C – Ctrl+V

    Who is it suitable for?: PC and laptop users latest generation– based on UEFI (firmware motherboard, which replaced the BIOS), the drive of which has the style GPT markup or not marked at all (new).

    What you need:

    • Windows 10 x64 distribution in any form - on an optical disk or in iso image format. Since UEFI only supports booting 64-bit OSes, Windows 10 x86 (32-bit) will not work.
    • Flash drive with a capacity of 4 Gb.
    • Read drive optical disks(if the data source is recorded on DVD).

    Preliminary preparation:

    • Erase all contents from the flash drive and, using any suitable tool, format it to FAT32. For example, using Windows(team " Format» is located in context menu flash drives).

    • Open the distribution. Images in iso format can be opened directly in Windows Explorer 8 and 10 by selecting " Open with» – « Conductor" If you are using earlier releases of Windows, you will need a program that can mount a disk image into a virtual CD drive. Such as UltraISO or DAEMON Tools.

    Main part of the work:

    Now... (drum roll) copy the distribution files (Ctrl+C) and paste them onto the flash drive (Ctrl+V). Bootable media is ready! You can proceed with the installation.

    A more complicated option (but also very simple): without distribution

    Suitable for: everyone.

    What you will need:

    • Utility MediaCreationTool(download from Microsoft website). On the download page, click " Download the tool now».

    • Flash drive from 4 Gb.
    • Internet (the higher the speed, the faster the result).

    No Windows 10 distribution required!

    Preliminary preparation:

    Delete all data from the flash drive. If you skip this step, they will be erased during the recording process.

    Main part of the work:

    • Launch MediaCreationTool (it does not require installation). Accept license agreement. When asked what you are going to do, check " Create installation media for another PC" and click " Next».

    • In the next window, specify the desired parameters of the new OS: language; version – “Windows 10” (not specified in the program, but it means professional) or “Windows 10 home for one language”; bit depth – x64, x86 or both. If you leave this to the discretion of the program, put a checkmark next to “ Use recommended settings for this computer", the selection options will become inactive.

    • Next, select the media. In our case, this is a USB device.

    • If several USB flash drives are connected to your computer, mark the one you need.

    • Observe, if you wish, the progress of downloading the “dozens” files. This concludes your active participation.

    • After downloading the distribution new system MediaCreationTool will begin creating the installation media. You can continue to use your computer.

    • When the utility informs you that recording is complete, click " Ready».

    With average Internet speed, creating installation flash drive using MediaCreationTool takes 30-40 minutes.

    The most “labor-intensive” option: 4 simple steps

    Suitable for: everyone.

    What you will need:

    • Utility MicrosoftWindowsUSB/DVDDownloadTool. Back in 2009, it was developed. But, as it turned out in practice, it can also be used to record “tens” bootable media.
    • USB flash drive from 4 GB.
    • Windows 10 distribution – iso image or DVD with files.

    Preliminary preparation:

    • Install the utility on your computer.
    • Free the flash drive from information.

    Main part of the work:

    • Launch Windows USB/DVD Download Tool. The first step is to select the source distribution (“ Sourcefile"). Click the button Browse"and point the program to the path to the iso or disk with Windows 10 files.

    • The second step is choosing a “receiver” (flash drive). Click " USBdevice».

    • On next stage indicate the desired media (select from the list) and click “ Begincoping"(start copying).

    • The fourth step does not require any of your participation - you can simply watch the progress.

    Affordable Internet, online storage and the combination of practicality with miniature flash drives have practically replaced optical discs from everyday life. Flash drives can hold much larger amounts of data, they are easily rewritten and have faster read and write speeds. In this regard, they also began to be used to create bootable media for operating systems. And here many users have questions. After all, to create bootable flash drive It’s not always possible to simply copy files to the media - you need to use special programs. Which one to choose? In this article we will talk about this. Or rather, let's consider Windows entry 10 onto a flash drive with several utilities designed for this procedure.

    Creating a bootable Windows 10 USB flash drive using the Media Creation Tool

    Microsoft has accompanied the last few releases of its operating system with a utility Media Creation Tool, which allows you not only to create a bootable USB flash drive, but can also be used to update the system. Naturally, if a company produces a special free product for your OS, you must first use it.

    The program downloads a Windows image from Microsoft servers, as a result the user receives official version operating system. The disadvantage of this method, for some, is that in order to use the official OS you must have a key. For those who do not have it, this method is suitable only if it is necessary to temporarily become familiar with the system. So how do you create a bootable Windows 10 USB flash drive?

    • go to the official page of the utility and download it;
    • Prepare a flash drive with a capacity of at least 4GB. Format it and connect it to your computer;
    • run the downloaded exe Media file Creation Tool;

    In order to avoid errors when creating a bootable USB flash drive, run the utility as an administrator. If you are working under a regular account and you have access to the administrator account, carry out the procedure from under it. This will help avoid errors 0x800704DD and 0x90016. In some situations, an antivirus may block the file copying procedure, so it is also advisable to disable it.


    That's it for writing Windows to a USB flash drive Help Media Creation Tool is complete. You can begin installing or updating the system.

    Bootable USB flash drive using Rufus

    If the first option does not suit you, you can use the Rufus utility. This recording program Windows image on a flash drive is small in size and does not require installation on hard drive, quite functional and, most importantly, distributed free of charge. You can download it from here. After downloading the program, run it and you can start setting up:

    • device: select the required drive;
    • partition layout and system interface type: if you have a computer with BIOS, select “MBR for computers with BIOS or UEFI-CSM” if UEFI - “GPT for computers with UEFI”;
    • file system: no changes;
    • cluster size: no change;
    • opposite the item “Create boot disk» click on the drive icon and select the operating system image;
    • Click “Start” and wait until the Windows 10 bootable USB flash drive is created.

    Conclusions

    Burning Windows 10 to a USB flash drive is a simple matter, the main thing is to understand it and choose the right tool. In addition to the above programs, there are many others, for example

    Hi all. Today in the article I will tell you how to make a bootable USB flash drive with Windows 10. I will not give many examples, since there are quite a few of them, I will focus on a couple or three options that I use myself and recommend to others.

    Creating a bootable USB flash drive with Windows 10 is done so that in the future the created image of the operating system can be used as an installation version of the OS itself on the computer. Previously, DVDs and CDs were used for this. But we all see that technology does not stand still and the age of disks is already coming to its logical conclusion.

    USB image can be produced as internal applications operating system and third-party software.

    What will you need for this?:

    • Windows 10 distribution
    • USB flash drive with a capacity of at least 4 Gigabytes
    • Specialized software

    How make a bootable USB flash drive image of Windows 10

    For example UltraISO. I will not hide that this is one of my favorites due to its effectiveness and simplicity. Moreover, UltraISO Suitable for PCs with BIOS (Basic Input/Output System) and UEFI (Extensible Firmware Interface). The utility is paid, but do not be alarmed, since a 30-day period is also suitable for us.

    • Download the Russian version of UltraISO from the home page
    • Install on your computer
    • We are launching in a trial period

    IN open window take action:

    • IN top menu go to the “File” tab
    • Then “Open”, where we find the ISO image
    • Next, click on “Boot” -> “Burn hard disk image”
    • IN Disk Drive set the address to the external drive
    • We produce the format strictly in FAT32
    • Click on the “Record” button

    After some time, the USB image will be ready.

    Media Creation Tool

    Media Creation Tool is an application with which you can record a licensed image of the Windows 10 operating system without a key from the Microsoft website. This product will download from the Microsoft server licensed version Windows 10 and will write to the USB flash drive.


    How to write to a Windows 10 UEFI flash drive

    Here you can, and should, use the so-called internal OS tools.


    In conclusion of the article, I would like to highlight a few more software that will help cope with this task.:

    • WinToFlash
    • Rufus
    • WinToBootic
    • UNetBootin

    What methods do you use? Write in the comments. Thank you!

    Technical level : Basic

    Summary

    In this article I will show you how you can prepare for installation or reinstallation. Windows installation 10 on your tablet or computer using official images of this OS provided by Microsoft.

    By performing these actions, you agree to the following terms of use. When installing Windows 10, you will also need to accept the license agreement, otherwise you will have to abort the installation and remove the OS from your device.

    Summary:

    1) What is needed to perform these actions.

    2) Creation bootable media with a Windows 10 image using the Media Creation Tool.

    3) Create bootable media with a Windows 10 image using official images from the Microsoft website.

    Note: Before performing these operations on your device, you should contact technical support its manufacturer. It may use special images for your device, and you will not be able to install the system correctly using "clean" images from Microsoft. Please clarify the possibility and legality of using this instruction.

    Note 2: Enterprise/Education editions are not mentioned in this article, however, most of the steps for installing Windows 10 of these types are the same as described in this article.


    Details

    What is needed to perform these actions.

    • Internet connection (you will need to download from 4 to 7 GB of data).
    • Disk space on your computer/tablet to store downloaded files.
    • A flash drive or disk with a capacity of 8 GB (in some cases, 4 GB will be enough). You can also use SD cards (for example, this will be much more convenient for a tablet).
    • For tablets without a full USB port - a USB-OTG adapter.
    • operating room Windows system 7 or later (Windows 10 recommended).

    Make sure you have all of this.

    Create bootable media with a Windows 10 image using the Media Creation Tool.

    This method is the simplest and is suitable for most Windows users.

    1) Download Media program Creation Tool and run it.

    You can download the program from the official Microsoft website by clicking on the button Download the tool now on this page. You can also use the direct link.

    Run the downloaded file. The following window will open:

    2) Read and accept the license agreement.

    Review the license agreement. If you agree with it, what is necessary for further work programs, click Accept.

    3) Select "Create bootable media for another PC."

    After some time (usually up to 1 minute), the program window will update and look like this:

    Click on the button Create bootable media for another PC. Then click Next.

    4) Select required parameters for Windows 10 that you are about to install.

    After the previous operations, a window will open where you will be asked to select the parameters of the Windows you are installing. Initially, as you can see in the next screenshot, they are inactive.

    In order to select the necessary parameters manually, uncheck the box circled in the screenshot. It will be signed as Use recommended settings for this computer.

    Select the options you need. In the first drop-down list, select Windows language. In the second - the editorial staff. In the third - bit depth, 32-bit or 64-bit.

    Learn more about languages.

    The language you select will be the default Windows language. The selected language also determines the region and format of time, currency, etc. in Windows, as well as the available editions of Windows 10. In the standard editions of Windows 10 - Home or Professional (Pro) - you can change the language. However, I recommend initially choosing the one you need.

    More about the editions.

    The editions available depend on the language you select. There are 4 of them in total. If you are going to reinstall Windows on your current computer/tablet, you can leave this parameter no changes - the program automatically selects what you need. Otherwise, you need to select exactly the edition for which you purchased the license.

    1) Windows 10. This edition available for all languages. It includes Windows 10 Home and Professional. When installing Windows from such an image, you will be asked to select desired type OS.

    2) Windows 10 Home for one language (Home Single Language). This edition is also available for all languages.

    3) Windows 10 N. This edition is available for a limited number of languages. There is no Russian or Ukrainian among them. It has a different set of built-in programs.

    4) Windows 10 KN. This edition is only available for the Korean language.

    Read more about bit depth.

    The system capacity directly depends on the processor architecture. It comes in two types - 32-bit and 64-bit. Moreover, a 32-bit system can be installed on 64-bit processors, but a 64-bit system cannot be installed on 32-bit processors.

    If you are going to reinstall Windows on your current computer/tablet, I recommend leaving this setting unchanged. Otherwise, make sure that the processor of the device you need supports one or another bit depth. In addition, the manufacturer of this PC must provide drivers for this bitness.

    Moreover, please note that a 32-bit system will only work with 4 GB or less RAM, even if you have 6 GB or more installed, and a 64-bit system should only be installed if you have more than 4 GB of RAM.

    You can also select the "Both" option. In this case, when installing the OS, you can select the bit depth you need.

    After selecting the required options, click Next:

    If you have changed any settings, you will receive a warning that Windows activation which you will install using this image, you may need a different license.

    Click OK.

    5) Select to create bootable media based on a flash drive.

    A window will open asking you where to save the system image. The program can simply download and save an ISO file on your computer for future use, or it can immediately write the system image to a flash drive. If you need to use a disk, I recommend using the instructions from Part 2 of this article (creating bootable media using official images from the Microsoft website). In this part of the article we will choose a flash drive.

    Depending on the parameters you selected earlier, flash drives of different sizes will be needed. The required volume is displayed directly under the first item - “USB flash memory devices”.

    Select 1st item - USB flash memory device and press Next.

    6) Insert the flash drive and select it in the program.

    A window will open in front of you with a list of all flash drives connected to your computer/tablet. If you connect a new flash drive, you will need to press a button Refresh disk list so that the program can detect it.

    Insert the flash drive to which you will burn the image, refresh the list of drives and select the appropriate device. Please note that this flash drive will be formatted. After that click Next.

    7) Wait for the image to download.

    After selecting the flash drive, the program will begin downloading the image. During this time, you can freely use the computer.

    8) After downloading, the image verification process will begin.

    9) After this, the program will begin writing the image to the flash drive.

    10) The bootable flash drive is ready!

    You can close the program.

    Creating a download private media with a Windows 10 image using official images from the Microsoft website.

    Let's assume:

    • Media Creation Tool is not working correctly for you;
    • You wanted to download the OS image yourself;
    • You wanted to burn the image to disk;
    • You want to burn an image of one of the Windows Insider Program builds to a disk or flash drive.

    Then this instruction will help you.

    I note that this method works on all the most popular operating systems, including Windows 7, Windows 8 and Windows 10.

    1) Download the desired image from the Microsoft website.

    1.1) You need an image of an official, stable Windows versions 10.

    Follow the following link: https://www.microsoft.com/ru-ru/software-download/windows10ISO/. The website that opens should look like this:

    It is possible that your browser will redirect you to the site https://www.microsoft.com/ru-ru/software-download/windows10. In this case, use it to still enter the image download site.

    Scroll down the page. You will see the following:

    Here you are asked to select an edition of Windows 10. You can read more about editions in paragraph 4 of part 1 of this article. Open the drop-down list and select one of 4 editions. After that, click the button Confirm.

    After a few seconds, the following drop-down list will appear. It asks you to select a Windows language. Scroll through the list and select Russian, if you need Russian, Ukrainian, if you need Ukrainian or any other language. After this, press the button again Confirm.

    After this, two buttons will appear in front of you that contain download links. The first button is a link to download a 32-bit image, the second is a link to download a 64-bit image. Read more about bit depth in paragraph 4 of part 1 of this article.

    1.2) You need an image of one of the preliminary OS builds.

    Go to the following site: https://www.microsoft.com/en-us/software-download/windowsinsiderpreviewadvanced

    If it says you're not an Insider even though you are, try changing your Microsoft account name to something in Latin rather than Cyrillic.

    The process of setting up parameters and obtaining the appropriate link is similar to the process described in paragraph 1.1 of this part of this article. True, the Insider Program website is in English, but you can use a translator.

    The only thing that will change is the available editions of Windows 10. Different builds, corporate editions, etc. will be available. However, for most it will be necessary Windows edition 10 Insider Preview, which contains Windows 10 Pro Insider Preview and Windows 10 Home Insider Preview. These editions are activated by licenses from Windows 10 Professional and Windows 10 Home, respectively.

    Also, not all languages ​​available for stable version Windows 10!

    2) Download Windows program USB/DVD Tool.

    This program from Microsoft is designed for burning ISO images to flash drives or discs. You can download it from this page, owned by Microsoft. Go to it and press the purple button Download on the right side of the site.

    3) Install the Windows USB/DVD Tool program.

    To do this, run the downloaded file.

    Click Install("Install").

    Click Finish(“Finish”).

    Now the program is installed, its shortcut is on the desktop. It can also be found in the Start menu.

    ATTENTION! During installation, the program may require you to install a system component - . NET Framework 2.0. The installation will most likely happen automatically; you will just need to confirm the download and installation of this component.

    4) Launch the program and select the ISO file you downloaded earlier.

    In the window that opens, click gray button Browse(1). Explorer will open. Find and open the ISO file you downloaded earlier there. Let it appear in line (2). After that, press the green button Next (3).

    5) Select the media on which you will burn the image.

    Click on the blue button USB device(1), if you write the image to a flash drive, use the blue button DVD(2) if you burn the image to disk or gray button Start Over(3) if you selected the wrong image in the previous step and want to return to the beginning of the recording process.

    6) Insert the desired flash drive/disk to which you want to burn the image.

    Select required device in the drop-down list (1). If you have just inserted a disk/flash drive, click on the blue button (2) to refresh the list available devices. After that, press the green button Begin copying(“Start Recording”, 3). If you messed something up in the previous steps, the gray button Start Over(4) to return to the beginning of the process at your service.

    7) Agree to format the flash drive if you are writing the image to it.

    The flash drive must be formatted before the recording process. If it contains information that is important to you, copy it to a computer or other flash drive before burning the image.

    To format, click the button Erase USB Device . After that, another window will pop up, “Are you sure you want to do this?” Click Yes("Yes").

    Read more: