How to send a call back via MTS. Sending a free MTS message “Call me back”. Setting up the service

Operator mobile communications MTS always takes care of its subscribers, so everyone can stay in touch, even if the money on their mobile account runs out. The emergence of such a service as “call me back” makes it possible to send notifications to the right person asking to call back. There are many situations when the balance of the number is empty and it is at this moment that you urgently need to make a call. Probably everyone is familiar with such cases.

Many people consider such a service unacceptable or embarrassing, and in vain. Various situations may occur. For example, you find yourself in a place where there is no way to top up your account or in at the moment you cannot leave your home (office). It happens that you can’t calculate your funds because you need to call another mobile operator or landline number. And emergency situations can happen, for example, a woman is at home with a small child, there is no money in her account, and she urgently needs to call a pediatrician. Therefore, the “call me back” service can be a salvation in some cases. And it is advisable for each subscriber to write down in his telephone directory a simple combination to use if necessary.

Terms of use and restrictions

Now let's move on to the most important thing and find out how to send a beacon from MTS. The command for this service is very simple, you need to dial the ussd request *110*number of the required subscriber in 10-digit format# and the call key. For example, *110*8911231231#. It should be remembered that such requests can be sent a limited number of times per day, no more than 5. The service works as follows:

• After typing the ussd request, the billing system sends a notification to the specified number.
• Your phone indicates that the request was sent successfully.
• Finally, an SMS notification is sent to your number that the request has been delivered to the subscriber; the message also indicates the sending date, time and number of remaining attempts.

Today, the “call me back” service is available to every MTS subscriber, so you can send a request immediately after activation new SIM card. There is no charge for sending such messages; this would probably be illogical. Previously, when this service just appeared, it was possible to send a request only within the network of a specific operator. But today it is already possible to send such a request to any mobile operator. The combination for sending a notification to Beeline, Megafon or Tele 2 is the same as for MTS. You just need to dial the number of another operator in the same format, the “call me back” service works the same in all directions. Based on the above, the question is: how to send a beacon from MTS? Already allowed.

What should you do when, after the typed command, information is displayed - sending was unsuccessful. This situation can happen due to several reasons:

• Incorrect command set.
• The dialed number does not exist or is not yet activated on the network.
• 5 attempts ended.
• Features of the phone.

With the request typed, the number dialed and attempts, everything seems to be clear. Here it is enough to carefully check the typed command. But if everything is correct, and the SMS is still not sent, then the device may have a ban on sending messages or it may be affected by technical features phone, for example, it cannot recognize and send the required command. The first thing you need to do is check the settings on your phone, if you decide on your own this situation If it doesn’t work, you need to call the support operator or contact the MTS service center.

When the operation is successful and the subscriber’s phone receives your request to call back in the form of an SMS message. It shows your number, date and time of sending.

Why aren't notifications coming?

Let's look at another situation. The request was sent correctly and successfully, but the subscriber does not call you back or the delivery report does not arrive. If the subscriber’s phone is turned off, then naturally he will not be able to receive the SMS, which is why the report does not come to you. As soon as the number appears on the network, the subscriber will receive your request, and you will see a delivery report. The subscriber to whom you sent the request may not receive a notification in several situations:

• The number has SMS forwarding enabled.
• A ban on receiving notifications for this service has been enabled.
• SMS message memory is full.

In all of the above cases, you will receive a delivery report. But if there is forwarding, your request will go to the number to which it is set. If the memory is full, then the subscriber cannot receive any SMS at all until he deletes the old ones and cleans his device.

To set a ban on receiving such SMS, you need to dial *110*0#, and to unblock *110*1#. Setting such a request is the personal desire of the subscriber. In all these cases, such submissions are taken into account and will be counted as successful.

The situation when there is not enough money in your account to make a call is familiar to many of us. But what to do if it is not possible to top up your account in the near future? With the “Call Me” service from Beeline, this problem is solved very quickly. This article will tell you how to send a request to call back from Beeline.

"Call me" service

All operators cellular communication There are options through which you can inform another subscriber for free to call you soon. In Tele2 it is, in MTS it is “Call me back”, and on Beeline the service is called “Call me”. They have general meaning, but differ in terms of provision, as well as the format of the USSD command. In order for the request to call Beeline to reach the recipient, you need to become more familiar with this service.

Connection and service management

Regardless of what balance the subscriber has at the moment: positive, zero or negative, you can ask to call back on Beeline in any case. The main thing is that when negative balance the operator has not blocked the SIM card. This means that you do not need to first connect and configure the service.

Now about how to ask a Beeline subscriber to call back? To do this, you only need one USSD command: * 144 * N #, where N is the cell phone number.

Dialing is only allowed in international format.

The subscriber whose phone number will be specified in the request will receive an SMS with the following content: “This subscriber asks you to call him back.” Your phone number will also be included in the message. In turn, you will receive a notification that your request has been delivered with a request to call you back. If the delivery report has not been received, then perhaps the recipient has blocked the reception of such SMS.

You can also set a ban and thus refuse incoming “begging requests”. This can be done using the USSD command * 144 * 0 #. However, you still have the right to send free SMS with the request “Please call me back.” To remove the ban, the combination * 144 * 1 # is provided.

Terms of service

Every Beeline Russia client has the opportunity to send a request, provided that they are located in home region. Throughout the day from one telephone number You are allowed to send up to 10 such requests. By default, the service is included in all tariff plans and is free. But its main advantage is that you can ask any subscriber to call back from Beeline cellular network Russia, located within our homeland. In addition, the option applies to VimpelCom clients living in neighboring countries: Armenia, Georgia, Ukraine (Kyivstar), Kazakhstan, Uzbekistan, Kyrgyzstan and Tajikistan.

You do not have the funds to make a call, and there is no way to top up your account in the near future, but you urgently need to contact by a specific subscriber? Don’t despair, this problem can be easily solved using the “Call me back” option from MTS. The service can be used by all subscribers of the telesystem, regardless of the place of registration and tariff plan valid on the number. WITH detailed description service can be found below.

Features of the service

The MTS “Call Me Back” service allows you to make a call at the expense of the interlocutor. After sending the request, the opposite side receives a message following format: “Please call me back and the number of the requesting party.” Next, the recipient subscriber decides for himself whether to make outgoing call or not. However, in most cases, such requests are sent only to close people, so there should be no refusal.

The option is provided completely free of charge. Subscribers throughout Russia will be able to use it. You can send messages with requests both in your home region and abroad.

The service does not require activation. Implementation free call can be done by sending a special system code.

If the subscriber’s smartphone is turned off while sending the “requesting” USSD, he will still receive the message as soon as he turns on his mobile device.

In the description of the service you can find only one limitation. On average, you can send from 5 to 10 “homeless people” per day. The number of “beggars” that a user can send per day will depend on the place of registration of the SIM card.

The exact volume of messages allocated for your region per day can be checked with the operator at 0890 or 8-800-25-00-890. Calls for network subscribers are not subject to tariffs.

To send a free SMS “Call me back” to MTS, you need to dial and send a certain digital combination. The USSD command to enable the “Call me back” service on MTS Russia is as follows: * 110 * subscriber number recipient# , and a call button.

Immediately after sending the request, the opposite party will receive a message containing a request for a call and the sender’s number. Further, the recipient is free to act at his own discretion.

If you quite often find yourself in situations where there is not enough money in your account to make a call, enter the above command with the number of a specific interlocutor in your contacts book. This way, you won’t have to constantly type a long number series, and you can throw off the “beggar” with one keystroke.

In addition to this, you can also use other MTS options that allow you to always stay in touch (see the section “Other ways to call without money”).

As mentioned above, any MTS clients can request a call back, regardless of their location and the tariff plan on the SIM card. Users will also be able to use the service for free in long-distance roaming.

There are rumors on the Internet that the option cannot be used by MTS subscribers with the first digits of the number (7978), that is, residents of the Crimean peninsula. This is wrong. Network clients living in this territory, like other users, can freely use this service.

Other ways to call without money

How else can you ask to call MTS back if there is no money? There are several ways to stay connected:

Using this service, you can top up your mobile phone balance on credit and again be able to make calls, send SMS and even use mobile internet. The function works even with a negative balance.

Terms of use of the service:

• activation of the service is possible if the number has a debt of no more than 300 rubles;
• you can borrow from 50 to 1000 rubles from the television system;
• the volume of lending will depend on the period of use of MTS SIM cards by subscribers, as well as on the amount of the monthly payment;
• The loan repayment period is 3 days.

You can enable this option in several ways:

• by sending USSD command * 111 * 123 #;
• via LAN or similar application for mobile devices, and the “Payment” / “Opportunities at 0” tab;
• by calling 111, and further following the voice instructions.

Attention! The option requires payment of a commission fee. The amount of the commission is calculated in accordance with the amount of the advance provided.

The “Top Up Me” feature is provided free of charge. Any client of the telesystem can send a request to top up their account.

To send such a request, MTS has two USSD requests:

• dial the number combination * 116 * on your mobile phone recipient subscriber number# , and press the call button;
• send the digital code * 111 * 7 # from your mobile phone, and then follow the voice prompts.

Terms and conditions of provision:

• the service can be used both at home and in long-distance roaming;
• per day you can send no more than five requests for replenishment;
• the subscriber can block the receipt of such messages on his phone. To do this, you need to send a USSD in this format: * 116 * 0 #. You can re-enable the function for the number by sending the command * 116 * 1 #.

There is one more function that will allow you to always stay in touch; we will consider it separately.

The “Help out” option allows you not only to make calls at a friend’s expense, but also to send free SMS. This function is also available to network clients throughout Russia. However, residents of Moscow and the region will be able to use it only in their home region. The service is not subject to tariffs.

To use the service, follow these steps:

• to send an SMS paid for by another subscriber, in the “Recipient” column, indicate the prefix 5880 before the subscriber number;
• to make a call at a friend's expense, dial 0880, and after the answering machine answers, indicate the subscriber number of the interlocutor.

Attention! The subscriber, the recipient, has the right to reject the message and incoming call, paid at his expense.

A familiar situation when you urgently need to make a call, but there are only a few kopecks left in your account and there is no time to top up your balance? Yes, many of us will remember such moments. But, thank God, the company cares about all its clients and is ready to help them in any situation. For this purpose, the service " Call me"Now lack of money in your account is not a problem!

How to send Megafon call me back?

All subscribers of the Megafon operator can use this service, which does not involve any complicated actions. So, to send a message to any other number of the same operator, you need to dial special combination numbers and symbols: *144*7XXXXXXXXXX# (7XXXXXXXXXX is the number of the subscriber to whom the message is intended).

That's it. Press the call button and after a few seconds the recipient will receive an SMS. If a person has money in his account, he will be able to call you back without any problems.

Please call Megafon back: receive confirmation

By creating the request to call back function, Megafon allowed its subscribers to always be in touch, even with a minimum balance. To ensure that a person is sure that his message has reached the addressee, the company’s employees have also developed a confirmation of receipt function. This means that as soon as this message will be delivered, the addressee instantly receives another message confirming the sending of the first one.

Also, do not forget about another very useful service, which is called the second line. Sometimes it happens that while talking to one person, you miss a very important call from another. But with this service you will always be notified about the second call.

And finally, a piece of advice - don’t rely too much on your memory, even if it’s uniquely accurate. It is best to write down the combination needed to send the “call me back” SMS to your phone or wallet. This is the only way you will be one hundred percent sure that you will be able to use this function at the right time, possibly avoiding serious troubles. Anything can happen in life. And every person should be ready for anything.

Are you faced with the problem of lack of money in your mobile account and the inability to top it up in the near future? A special “Call me back” service comes to the rescue, which is provided by every cellular operator in Russia.

Mobile operators offer a number of other services if you run out of money in your account, which will help you always stay in touch with your relatives and friends.