How to check the status of an ssd drive. Checking the SSD for errors

Solid state hard drives have become a real innovation in the world computer technology. Operating speed SSD drives many times more than the average hard drives(HDD).

As a consequence, large number personal computers and laptops began to be released complete with new drives, and users often resort to replacing the old type of drive with a new one.

Unfortunately, standard operating room capabilities Windows systems do not give the opportunity to produce fine tuning and optimization of SSD drives. A large number of software. Among them, the free SSD Tweaker program is especially popular.

You can download SSD Tweaker for free from our website. It is available in the form of a kind of manager, which has a simple and intuitive interface. Using the program, produce flexible SSD setup Even not the most advanced users can use a disk for their OS, which is undoubtedly a plus in his piggy bank.

Using the power of SSD Tweaker, you can centrally configure your drive in just a few simple steps. All actions will be carried out semi-automatically with minimal participation from you.

So, after a few simple operations, SSD Tweaker will configure the Windows indexing mechanism, the system defragmentation service, and adjust the area system cache and will adjust all file system parameters.

Optimal use of hard drive memory can be achieved using the special Superfetch technology, which is available in the program's arsenal. Also, you can find special tools with which you can manage file swap settings. The DIMP system will help you monitor the power consumption status of the device.

Solid-state drives (SSDs) have become a fixture in our lives. Giving the user many advantages compared to traditional HDDs (more high speed reading and writing information, quiet operation, low power consumption and high resistance to mechanical damage), they, however, are not without a number of disadvantages (for example, shorter operating time compared to HDD). Accordingly, their condition must be monitored from time to time in order to timely track negative changes in their functionality. In this material I will tell you how to check an SSD drive for errors, how tools will help us find out its performance and how to use them.

If you are wondering about SSD check disk for errors and performance, which means that a situation could arise in which your SSD stopped functioning normally. This is primarily due to the fact that SSD ( Solid State Drive – solid state drive ) allows you to write information to yourself a limited number of times (the resource of competitors SSDs - HDDs in this regard is not limited). Typically, manufacturers provide a warranty on their SSD drives for a period of 3 years (or for the volume of recorded data of 35 terabytes of data, which is approximately equal to 20 gigabytes per day). Those who actively use their SSD drive (on various 24/7 servers, etc.) may experience faster failure of SSD devices.

Well, those users who work with their PC in normal, “household” mode can enjoy fast work their SSD for 5 or more years. In the last article, I described in detail who I recommend setting up a disk for with this OS.

How to check an SSD disk for errors and performance - list of programs

If you do not need to know the performance of the SSD drive, then you should use the functionality of the corresponding programs that will allow you to perform ssd test for mistakes. Below I will list these programs and give their corresponding characteristics:

CrystalDiskInfo program

It is a free utility that will check the read-write speed of your disk, displays general condition his health, temperature, supports S.M.A.R.T (condition assessment technology hard drive) and much more. This program CrystalDiskInfo has two main versions (installable and portable), and in the case of the installable version, you can monitor the status of your disks in real time using the program icon in the system tray. If the pressing question is how to check the ssd for bad sectors, then the CrystalDiskInfo program will effectively help you with this.

1. To use the program, download it, install it and run it.
2. The program will scan your hard drive to assess its condition, errors, etc., and then give you the result.
3. All main actions are concentrated in the “Service” tab of the main menu (in particular, if necessary, there you can set the disk rescan function).

SSD Life Program

Determine performance and SSD errors, the SSD Life program can also help us. This one is conditional free utility written specifically for working with SSD drives, allowing you to proactively monitor declines in their performance. As in the case of CrystalDiskInfo, this program has two versions - portable (produces a report on the status of the disk immediately upon launch, without additional installation), and installation, displaying the status of the disk in real time so that the user can monitor the situation in advance.

The working window of the program is extremely simple, on it you will see the predicted operating time of your disk, an assessment of its condition, how long it has already worked, and so on. To update report data, use the corresponding keys below.

SSDRready program

SSD diagnostics can also be carried out using the SSDReady program, created specifically to monitor the condition of your SSD drive, estimate its potential operating time and other relevant statistics. It keeps track of the amount of data written and read from the disk every day and requires its permanent work on background and is good option in checking the SSD disk for errors and general performance.

DiskCheckup program

IN testing hard SSD drive for speed and performance, we can also be helped by the DiscCheckup utility, which allows you to monitor the S.M.A.R.T attributes of a separate hard drive. As with the programs described above, this application shows statistics of the hard drive, allowing you to track the health status of the latter. The functionality of this product is essentially no different from the programs described above.

HDDScan program

HDDScan is a free utility for diagnosing hard drives (RAID, Flash USB, the SSDs we are interested in are also supported). This program can be a convenient and handy tool in the question “how to check an SSD for errors”; it searches for errors on the hard drive (bad blocks and sectors), supports demonstrating S.M.A.R.T attributes and changing some HDD parameters (AAM, APM, and so on) . This product can be used to regularly “test the health” of your disk and prevent its degradation; you can avoid losing the files you need by creating appropriate backups when necessary.

Increasing the speed of an SSD hard drive 10 times [video]

The answer to the question of how to test an SSD disk for errors and performance will be the use of a number of special diagnostic programs that I described just above. Most of them have fairly simple functionality, allowing you to monitor the status of your SSD drive in real time, and, if necessary, perform it additional check. If you are happy owner such disks, then use the functionality of one of the described programs to regularly monitor the status of your device, this will allow you to timely monitor its condition and protect your files from unwanted losses.

12/03/2015

A very compact utility for configuring your system for using SSD disks that eventually displace regular HDDs. The price of SSDs is constantly falling, but data transfer speeds are increasing, but not all systems can work correctly with these drives. In particular, Windows XP does not have features to work with these devices. For this reason ordinary users you have to use programs from third-party developers. One of these programs is SSD Tweaker. This utility allows you to optimize the operation of system services, or simply disable unnecessary utilities. It has a multilingual interface, including Russian...

23/01/2015

OCZ Toolbox is a utility for updating the firmware of a solid-state hard drive from the OCZ company. This utility is necessary for all users of such hard drives, since solid-state drives, unlike hdds, have own firmware, which needs updating. The fact is that the manufacturer of a given hard drive notices problems much later than the new hard drive is released. The OCZ Toolbox utility automatically detects your hard drive and downloads from the Internet new firmware, if it exists, of course. We must warn you that updating the firmware is only possible on a disk that is not used as...

16/01/2015

Intel Solid State Drive Toolbox is a utility for managing solid state drives from Intel. This program allows you to configure the operating system for proper interaction with the drive, as well as for carrying out full diagnostics drive and installation additional parameters. The program makes it easy to check availability new version firmware for your hard drive and install it if it is detected. Also, the program can diagnose the disk for errors and fix them if they are found. Besides, Intel program Solid-State Drive Toolbox allows you to view an approximate...

10/12/2014

SSD Life – A program that is designed to monitor hard work disks. Displays full information O SSD drive, calculating wear and service life. The service life calculation can increase or decrease, the result depends on the statistical data on the use of the equipment, which is entered into a formula specially developed for this purpose. In addition to this it displays additional information, for example, operating time, number of starts, etc. Some data will be very useful when purchasing a disk that has already been used by someone; the program will display how much and how it was used this disk. Displays information about...

SSD is a storage (recording) device whose operation is based on various microcircuits and a controller. Such devices are widely used in many modern devices: laptops, smartphones, tablets and so on. What is this? Improved hard drive! When many people hear the term SSD, they imagine something complicated. However, this is just a recording device, which is present, as already mentioned, in many devices.

What is the difference between an SSD and a hard drive?

If this is a recording device, then why do we need hard drives and what is the difference between them? The main difference is the operating principle. The hard drive is based on magnetic disks(plates), from which constant reading and writing occurs by reversing the magnetization of the cells. SSD, on the other hand, operates on microcircuits and is an oversized flash card.

SSD drives have many advantages, in particular: high speed, low level noise, light weight. There are also disadvantages, such as: high cost, inability to recover lost data.

One way or another, SSD drives have become firmly entrenched in our lives. When working with them, there is often a need for diagnostics, testing, and optimization. For this there are special programs. Let's look at them in more detail.

Programs for setting up and optimizing ssd

SSD Mini Tweaker

Let's start with something simple and easy. This program is designed to quickly and efficiently configure your SSD drive. It has a simple interface and takes up very little space on your computer (about 3 MB).

After starting the program, one single window appears in front of us:

In it we can select various parameters, the implementation of which is quite difficult on our own. We tick the boxes that we need and click “Apply changes”. That's all, nothing more is needed. Not bad for a program that takes up so little space.

SSD Life

Also very light and accessible program for working with SSD. It diagnoses the selected disk, displaying the percentage of its health:

The amount of memory that has been written and read over the entire time is available for viewing. The results can be saved, although this is not very useful. A much more necessary function: automatic check every 4 hours. If the status has changed since the previous check, the program will let you know.

SSD Fresh

Enough major program with rich functionality. After installation you will be asked to register free version. To do this, just enter your data:

After launching the program, we see a main window with three tabs: overview, optimization and settings.

The overview tab presents general information: volume, free and busy place, file system. Of course, it is possible to view S.M.A.R.T data. For those who are not in the know: smart - special technology hard drive performance assessments. It is a set of fields and values.

But the main thing SSD function Fresh - disk optimization. Here it is implemented with the highest quality and user convenience:

In each optimization section, the status is clearly presented and there are only two buttons: Optimize and Restore from backup copy. After clicking on the first one, optimization is performed automatically. You can also optimize all parameters by clicking on the button in the upper right corner.

Tweak SSD

A program as easy to use as SSD Life. If the latter's task is to diagnose the device, then Tweak SSD optimizes the disk's performance after pressing one single button.

We reviewed the main programs for diagnostics and SSD optimization disks. Undoubtedly, drives of this type will not lose their relevance for a very long time due to the speed of operation and the absence of unnecessary noise.

Hello dear readers, I once wrote an article about, I am continuing this topic, only this time the topic will be about new SSDs disks. Namely, I will show free program which will be possible download for free and read the instructions for it.

Program for ssd drives

The program is very easy to use, you just need to know what to press.

Download the program for free SSD Mini Tweaker :

The archive contains two versions of the program for 32 and 64 bit systems. To see what system you have, select computer properties.

Launch it and see this window:

After checking the boxes, click Apply changes.

Now more about checkmarks in the program for managing tough SSD drives.

• Enable Trim— it’s better to leave it, since this function is responsible for clearing unused blocks. If you disable this option, a mountain of garbage may accumulate, which will affect .
• Disable Superfetch- a function for caching frequently used files. Since the response is small in SSDs, the option can be disabled.
• Disable Prefetcher- option to speed up startup operating system and programs. Because SSD drives have excellent speed, then the option can be disabled, freeing up system memory.
• Leave the system kernel inmemory— usually the system kernel is dumped into the swap file. In order for the kernel to remain, you need to check the box. This way you can reduce the number of disk accesses and speed up the system. But a minimum of 2 GB of RAM is required!
• Increase file system cache size — 2 GB of RAM is also required. Reduces physical memory space for services and applications, but improves performance by reducing data writes to disk, hence it is good for the file subsystem.
  
• Remove the limit from NTFS in terms of memory use - Again, you need a sufficient amount of RAM. The number of updated data in memory for writing and reading files increases. After this feature, running multiple applications at the same time should improve.

Disable defragmentation system files when loading— boot defragmentation is a useful thing, but not with an SSD. If defragmentation is enabled at startup, the SSD drive can even be damaged!

Disable Windows indexing system- the service is disconnected Windows Search, which is used to index folders and files on a disk. IN SSD Windows Search is unlikely to improve performance, so disable it.

You can also speed up performance by manually disabling file content indexing.

Disable hibernation mode- turning off the mode hibernation can free up memory on the SSD disk if it is small. In Kratsi hibernation is needed to dump data to a file hiberfil.sys, and when turned on, restore the information back to memory. Read more about this in the article

Disable protection feature systems— you can also disable system restore, which frees up RAM And hard drive. But the system restore function will not be available. If you don't use it, turn it off. I always have it disabled, I don't like it.

Disable defragmentation service— they say that defragmentation is not necessary for an SSD drive. But I advised you to disable it and do defragmentation according to my article, called defragmentation by 5 points.

• Disable paging file cleanup — for SSD disks, it is recommended to disable clearing the paging file when the system is turned off. Due to unnecessary disk access. Turn it off.

That's all, now you have program for optimizing SSD drives=)