• How to install the program on your computer? How to install the program on Windows. Software installer for Windows. Where to download the software installer for Windows

    The traditional set of applications integrated into the system does not always meet our needs. Moreover, standard means Windows is much inferior in functionality and ease of use absolutely free software for various purposes, which is now freely distributed on the Internet. However, the context of the previous sentence requires the correct solution, and if the question of how to install a program on a computer is a unique problem for you, you should pay attention to this article.

    Technical “disappointment”

    Not every program can be installed on your computer. There may be reasons such as:

    • low-power processor;
    • insufficient amount of RAM;
    • weak video card;
    • absence free space on the hard drive, etc.

    In general, your PC's resources may simply not be enough. This is precisely why users often have a question: how to install a program on a computer when the software “refuses” to be installed on the hard drive? The answer is obvious and, paradoxically, almost always “flickers” before the user’s eyes.

    Hardware “dependency”

    Before you pay attention to system requirements software Typically, these kinds of (limiting) characteristics are indicated on back side boxes with the purchased disc or are described on the developer’s website. Typically, unfavorable installation situations occur during installation. computer games, as well as in the absence of critical system components. And if your PC hardware allows you to install the program, but the result of the software “implementation” process is zero, you need to understand in more detail where the error lies and analyze whether the correct sequence of actions was violated.

    How to install a program on a computer: main points and installation steps

    As a rule, software downloaded from the network requires unzipping. The unpacked digital container usually contains an executable file called Setup or Install and has exe extension. The user just needs to double-click on one of these installation “markers” - and the “Installation Wizard” will immediately launch. All you have to do is monitor the correctness of the process, make the necessary amendments by filling out the registration form and confirm the conditions at the right time license agreement.

    Destination

    It will be useful for novice users to know that it is not always advisable to install the program in the default folder. Typically, the operating system “prescribes” the software to the directory: C\: Programm files\. However, installing large games on system disk It is highly discouraged, and there are plenty of reasons for this. It is much more practical to use a specially allocated disk partition for such purposes or create a folder with the appropriate name.

    So, at the first stage of installation you need to pay attention to:

    • Where the program will be installed.
    • Does the partition have the proper amount of free space?

    Intrusive “baggage”

    Often, the installation wizard, in addition to the distribution of the main program, simultaneously tries to install various applications that you, in general, do not need. In order to understand how to install a program on a computer in its pure form, you need to carefully monitor the context of successive windows and identify the true purpose of a particular graphic element: an arrow, a triangle, an asterisk or some other type of marker. In most cases, clicking on such an icon will make it possible to detect a number of spam applications; by unchecking them, you will free yourself from “uninvited guests”.

    Lost in translation

    The Installation Wizard does not always have Russian-language interface. However, understanding the essence of the installation process, you can come to terms with this phenomenon. A common question: how to install a program on a computer if the text support is not entirely clear, has a simple answer. Considering the generality of the installation algorithm, you just need to remember a few English words:

    • Next - corresponds to the usual “next”.
    • Accept - accept (or agree).
    • Continue - continue.
    • Back — back (or return to the previous window).
    • Installation is complete - installation is complete.

    Doubles and clones

    On a computer with Windows 7 or XP on board, there is practically no difference. Everything happens according to a well-established and generally accepted algorithm of actions, but the OS can still interfere with the favorableness of the installation process. And this is due to the fact that the OS registry already has an entry indicating that the system has an identical application. As a result, you will need to remove the originally installed program and only after that install a new or working version of the software of the same name. However, in most cases, having discovered similar code, the “Setup Wizard” replaces the files present in the OS, so to speak, overlays the data on top of the existing ones. However, if you do not resort to the parameters and settings of the “old” version software product remain unchanged and automatically become involved in the operation of the currently installed software.

    Step-by-step instructions, or How to do it

    Let's use an example to figure out how to install correctly new program to the computer.

    Step No. 1. Uninstallation

    In case of inoperability previously installed version It is recommended to remove the software. This action can be done using built-in OS tools or using special “recycling” programs. By the way, the popular CCleaner is quite competent in solving this kind of issue; moreover, this software also erases the entries of the uninstalled application from the OS registry.

    Step No. 2. Installing the download manager


    Restart your computer and congratulations: now you know that you can install programs!

    Program version: 2000.8.3 Program size: 606 Kb Downloaded: 2264

    Program version: 3.5 Program size: 1.19 Mb Downloaded: 2860

    Program version: 4.20 Program size: 963 Kb Downloaded: 914

    Program version: 1.5 Program size: 1.67 Mb Downloaded: 1500

    Program version: 3.0 Program size: 285 Kb Downloaded: 2023

    Description: A program for creating multifunctional autoruns (menus). The program allows you to easily create multifunctional colorful menus to install your programs, download already installed programs, opening files, etc. The program is easy to learn, takes up a small amount of space, has a large set of functions and, most importantly, is absolutely free. Main features of the program: · creation multi-level menus, i.e., for example, depending on the button pressed, one or another submenu may be loaded; · adding an unlimited number of submenus; · selecting the style of the submenu window; · specifying icons and submenu titles (in the title bar and on the toolbar); · indication of the music file that will be loaded when the submenu is displayed (wav, midi); · setting the background image of the submenu (jpg, bmp, ico, wmf, emf); · setting the submenu window mask (bmp). Using the mask, a non-standard one will be created Windows window; · specifying the color of the submenu window; · adding an information panel to a submenu. When you hover your mouse over a button on the panel, it will display text information; · specifying the color, font, text alignment, transparency, etc. of the information panel; · adding an unlimited number of buttons to each submenu; · specifying the text and tooltip for each button; · select button style ( regular button, button - text, graphic button); · indication music files when hovering, pressing and removing the mouse from a button (wav, midi); · specifying the font of button text and other properties; · large set functionality buttons: loading submenu, launching the program, opening a file, showing the "About the program" window, shutting down, minimizing the window, issuing text messages before and after downloading a program/file, printing a file, viewing a folder, etc.; · reading file/folder name from system registry or direct indication; · customizing the "About" window; · specifying a list of fonts used in the program, which will be installed during execution and unloaded when the program exits; · specifying text constants that will be automatically replaced in labels, file paths, etc.; · 4 predefined constants (%CurDir% - path to the folder with Menu.exe, %WindDir% - path to Windows folder, %SysDir% - path to the System folder, %Z% - name of the drive on which Menu.exe is located); · more convenient way compiling the menu.ini file; · increased operating speed compared to previous versions; · and much more.... Here you can

    Program version: 4.2 Program size: 395 Kb Downloaded: 3353

    Program version: 1.2 Program size: 411 Kb Downloaded: 2566

    Program version: 1.2 Program size: 59 Kb Downloaded: 797

    Program version: 3.0.514 Program size: 1.27 Mb Downloaded: 902

    Description: Installer for developers. No frills, but everything you need. Installation of Borland Database Engine 16bit(IDAPI). Simple and clear. For Windows 3.1, 95, NT.. Here you can

    Program version: 2.1 Program size: 499 Kb Downloaded: 1621

    The Software Installer for Windows program is an original and relatively new solution that simplifies the search and installation of most standard programs For operating system Windows. After all, before you had to go around a bunch of sites to find a classic set of the necessary software, download a lot of them one by one different programs and applications to normalize work with a computer or laptop.

    The program installer is good because it saves your time 10 times. The essence of the installer program is simple - it already contains all the necessary download links for more than 700 various programs for Windows. Naturally, you won’t need much of this software, but you can easily select the programs you need!

    The software installer we're talking about here is called InstallPack. At your request, this simple program will collect all necessary software into one installer and will allow you to download it to your computer for subsequent installation. This means that you will save the time that you previously spent on searching and downloading each one in turn. separate application. Now all this is in the past.

    Where to download the software installer

    Step #1

    You can download this most useful and convenient software from the official website using the link:

    Step #2

    Just click the “Download multi-installer” button, and then “Save file”.

    Step #3

    On next stage you just need to run the downloaded program installer from your browser downloads (downloads can be opened using the Ctrl+J combination) or computer memory. The name of the downloaded file is InstallPack.exe (you can even find it by searching in Windows).

    IMPORTANT: if for some reason the download did not succeed the first time, repeat the process again. At least, when downloading, warnings were noticed from the antivirus, which does not like such homemade software, considering it harmful. Don’t be alarmed – let’s restart the download.

    Step #4

    Immediately after launching the program installer, a list of the TOP 100 most popular software will appear. Pay attention to the “TOP 100” button, which can be expanded to select the desired section with a set of programs.

    Step #5

    We also recommend using the SEARCH field to find here compulsory programs, which you are used to using on your computer. We tick all the necessary software that we want to install. Selected programs are collected in top list, which is very convenient for project control.

    Step #6

    So after completing the selection necessary programs, click the “Next” button. You can cancel the download of the antivirus (or another program that will be installed here in the future) by unchecking the box. Again the “Next” button.

    Step #7

    Now we are observing how the process of downloading the selected programs progresses. The only thing that is required of us here is to wait until the InstallPack program automatically does its job. But we will have to wait, since the download is not going very quickly.

    All programs downloaded in the queue are marked with the message “Ready”. You must wait until the automatic process completes.

    But at the last stage we still have to take part in the installation of the selected software. The program installer will only download the necessary programs and begin their installation, but the process can only be completed in manual mode. In principle, this is very correct, since installation involves selecting custom settings.

    For example, the apps you choose may ask you to:

    a) specify the installation language - do this;
    b) select a package (full or custom version);
    c) enter logins and passwords (for example, when installing Skype);
    d) agree to the rules of the license agreement;
    e) indicate the installation path;
    f) enter user settings;
    g) press the “OK”, “NEXT” or “DONE” button several times.

    But this is much easier than searching for all the programs on your own across the vast expanses of the Internet. IMPORTANT: pay attention to the fact that while the program installer is running, different installers will be launched in turn. They are displayed on the bottom panel/task bar of Windows (icons for new programs will appear in the bottom bar).

    Yes, and don’t forget to uncheck the extra checkboxes if they try to install something on you. Nowadays, all programs like to add a few more programs against your wishes. Read the text in the boxes and pay attention to the boxes with check marks. Each time, read the options that are checked by default and uncheck unnecessary boxes.

    The developers have created an advanced software downloader that can simplify and speed up the download and installation of various software. There are a lot of programs at your disposal, including antiviruses, browsers, video editors, media players, instant messengers, disc recorders and much more. Each of the programs is presented in latest version and tested for the presence of malicious components by leading antivirus laboratories.

    You can use InstallPack when upgrading Windows or purchasing a new laptop. It will also help you before starting work on a new project - when you need several more programs.

    Possibilities:

    • large selection of software;
    • search by name;
    • sorting by categories;
    • a short description for each program;
    • specifying the size of the exe file.

    Working principle:

    After launching the application, you will see a friendly menu with a list of programs. This list can be customized as you wish. Click "Name" and the programs will be arranged alphabetically. Start typing the name of the program - and you will see it immediately. Clicking on the Category tab will sort the list by category. You can also read a short description and see the size installation file. In addition, the application developers have included ready-made packages. In the drop-down menu entitled "TOP 100", you can choose, for example, a Must Have or a "Patriot" package. The first one will come in handy after reinstalling the system or upgrading the computer, and the second one will be a great find for those who are delighted with domestic software. For download selected programs Just check the boxes and click “Next”.

    Pros:

    • launch without installation;
    • fast and convenient search;
    • the ability to download programs without unnecessary “body movements”;
    • unlimited number of programs downloaded at one time.

    Cons:

    • The program shortcut is not created.

    InstallPack is a unique application of its kind. On at the moment there are no analogues on the RuNet that can compete with it. Just try it once and you will use it all the time.

    Analogues:

    • Smart Installer Pack is a similar application with an English interface;
    • CrossOver Software Installer - downloading and managing programs

    If you are just starting to master the computer and don’t even know yet, how to install the program, then I’m sure after reading this article you will no longer have questions on this topic. Installation of different programs may differ, but it is almost the same everywhere, and in fact, installing a program is much easier than some beginners think at the beginning of their journey.

    In general, it’s worth saying that if you do nothing, but just follow usual instructions in the windows when installing programs, that is, simply click the available buttons: “Next”, “Next” or “OK”, then you can easily install the program. But we decided to learn, right? And we need to know what actions lead to what when installing programs.

    Installation of programs. Example!

    Now for an installation example real program, let's look at how this is done correctly.

    Then from the Internet or from some disk, we usually have a file like this on our computer.

    The first thing you need to do is launch it double click left mouse button. The first window will open. In 99% of cases this window " Software Installation Wizard", where we are greeted. There we can see the name of the program, and sometimes we are reminded that it is advisable to close other applications before installation. In this window we need to click the “Next” button.

    Almost always when installing programs, we need to check the box “ I accept the terms of the license agreement", well, that means that we agree with the rules for using this program. Here's an example:

    The next window that is always present during installation is folder selection. During the installation process of the program, a window should appear indicating where the files will be copied for its full operation.

    Usually the program is installed on the system drive “C” in the “Program Files” folder. You can of course change this path by clicking the "Browse" button and selecting the folder where you want install the program. I usually leave it as is, that is, by default! And all installed software I have it in the “Program Files” folder on drive “C”.

    Very often when installation free programs , they are trying to install some more for us as a kit additional applications, or change home page in the browser. Pay attention to this, and if you don’t need such additions, then uncheck the extra boxes, and only then click “Next”.

    Another window that is always present, and usually after installing the program, is a window in which you need to leave checkboxes next to the items that interest us. For example, this could be creating a shortcut on the desktop, or a program folder in the start menu, and so on. Read and everything will be clear.

    The most important stage is the one itself, during which the necessary files are copied.

    In the last window, after everything has been copied and installed, we are prompted to click the “Finish” button and the program will start if we have not unchecked the corresponding box.

    We have now described the main windows that appear when installing programs. IN different cases they may differ, but the essence remains the same. There are also other issues: windows for selecting the program language, installing an add-on, where you need to uncheck it, etc.

    After installing 5 – 10 different programs, thoughtfully and independently, you will no longer have questions about which window to do what, and roughly speaking, the brain itself will develop the necessary actions.

    Read more: