Connecting a gamepad from PS4 to PC. Wireless gamepad from Sony PS3. Connect to PC

Modern players strive for maximum comfort during gameplay. Previously, control was carried out only using a mouse and keyboard. But over time, they started playing on PCs using joysticks. Gamepads first appeared on game consoles, which attracted many people. With these devices, game control has become more comfortable. Today we have to understand how to configure a joystick on a PC. More precisely, what needs to be done to connect the gamepad to the computer. Bringing an idea to life is not always easy, but the opportunity exists. Much depends on the type of joystick you use. Some scenarios will require certain knowledge from the user, but even a beginner can cope with some.

Connection methods

How to configure a joystick on a PC? To connect of this element management, you can use a variety of solutions. But setting up the device is usually done using special emulator programs. They will be discussed later.

First you need to understand what methods of connecting gamepads take place in practice. Modern players have the following options:

• wired connection;
• wireless work with the gadget.

More and more often, players use the second method. It eliminates wires, allowing you to use the gamepad in a way that is convenient for you.

What you need

How to configure a joystick on a PC? As emphasized earlier, a lot depends on the type of device being connected. In addition, it is necessary to prepare some items, without which you can forget about the implementation of the task.

When connecting the gamepad to the computer, you will need the following components:

• PC/laptop;
• joystick;
• wire for connection (if wired communication it is attached to the gamepad);
• a disk with drivers (they can be downloaded from the joystick manufacturer’s website);
• a special program for setting up controls (emulator);
• adapter for Wireless communication (for wireless connection).

This will be enough. In practice, the driver disk has virtually no space. But an emulator can come in very handy. It responds to the gamepad settings. This application is especially useful if we are talking about a joystick from xBox or PS.

Gamepad for Windows

How to connect a gamepad to a computer? Let's start with the most common option. Microsoft has a number of joysticks that do not require any special action from the user to configure. We are talking about Gamepad for Windows.

If the user has such a device, then to configure and connect you need:

1. Use a wire to connect the joystick to the computer. To do this, the device is connected to USB. At wireless communication you need to insert the receiver into the PC, turn it on, then synchronize it with the gamepad.
2. Turn on the PC and wait for it to boot.
3. Wait a while. The operating system will find the necessary drivers, after which you can work with the joystick without any problems.

Fast, simple, convenient. But people don't always use gamepads For lines Windows. Therefore, you will have to think about how to install a joystick on a PC from PS3 and other consoles. What will it take?

From PlayStation 3

It is in this case that the answer will require specific knowledge. The thing is that gamepads are from game consoles You can connect to a computer. But for them normal operation you will have to make special settings.

The following tips help you set up DualShock3, SinAxis DualShock4 gamepads on your PC. In order to connect the joystick, you need:

1. Download to your computer and install Microsoft.Net 4.0, Visual C++ 2013 (package), SCP Driver.
2. Connect the gamepad to the computer. If you are using a wire, just plug the cable into the USB socket. Otherwise, you need to connect the WireLess adapter to the PC (it is usually included with the gamepad), then turn on the device, open “Devices and Printers” in the operating system and find a new device, synchronizing with it.
3. How to install a joystick on a PC? You must install drivers for the connected component from the disc included with the gamepad or using the manufacturer's official website.
4. Unpack SCP Driver. Launch the application. If you Windows user XP or Vista, you must check the Force Install box.
5. Click on the Install button.

After initialization is complete, the connected controller will be recognized as an original xBox 360 joystick.

PlayStation 4

But that's not all. To work with gamepads from PlayStation 4, you can use alternative method connection to a computer. What are we talking about?

How to configure a joystick on a PC if an original PlayStation 4 device is connected? Need to:

1. Connect the gamepad to the USB socket. If used wireless connection, then a WireLess receiver is inserted into the computer, and the joystick is switched to pairing mode. To do this, you need to press the share button and hold it until the gadget starts blinking. Next, in the operating system, through the “Devices and Printers” menu item, synchronize the devices.
2. Install InputMapper. It is advisable to do this before connecting the gamepad. Launch the application.
3. Install drivers for the joystick you are using.

No more manipulations are required. At this point, the computer will begin to work normally with the new gamepad.

Settings

How to install a joystick on a PC? For an emulator like InputMapper, the main thing is that the devices are synchronized. Further, such utilities allow you to configure gamepads in a way that is convenient for the user.

Using the InputMapper as an example, we can say that the user must adhere to the following algorithm of actions:

1. Connect the gamepad to the PC. Launch the emulator program (InputMapper).
2. Select the desired device.
3. Go to the Settings section. In the Mapping tab you can run joystick emulation. In Configurations you can configure the buttons. You need to click on one or another operation, and then press the corresponding key on the gamepad.
4. Save settings.

From now on, it’s clear how to configure a joystick on a PC. In reality, everything is much simpler than it seems. Beginners are advised to use a wired connection and gamepads designed for computers.

Gamers are increasingly thinking about how to connect a PS3 gamepad to a PC. Is it even possible to do this? After all, a computer is a multifunctional, complex machine to which various components are connected. And joysticks are no exception. If we are talking about a gamepad intended for PC, the process will not cause any problems. Is this really the only option?

Is there any chance of connecting?

TO modern computer You can connect almost any joystick. The main thing is to know what to do in this or that case.

In fact, the process as a whole is not a hassle. Even a novice user can connect a PS3 joystick to a computer. What features and nuances should you pay attention to? What actions will have to be taken to bring the idea to life?

What do you need

The first stage is preparation. How to connect a PS3 gamepad to PC? To do this, the user will have to prepare certain equipment. Without it, it will not be possible to carry out the procedure.

To play on a computer using a Play Station 3 joystick, you need the following items:

• gamepad from a game console;
• USB cable for connecting to a PC;
• Bluetooth adapter (for wireless gaming);
• special emulator programs to recognize the connected device.

Nothing else is needed. Please note that a Bluetooth adapter is not a required component. But all other items need to be prepared. It is impossible to do without them.

Driver download

Almost every gamer sooner or later has a question about how to connect a PS3 gamepad to a PC. It is not difficult to guess that the computer must recognize the device. Problems often arise with this.

In general, sometimes it’s enough just to connect the joystick from Play Station 3 via a USB cable to the computer and press the round button in the center of the device. The gamepad will turn on. The operating system will automatically find required driver and install it.

But such situations are rare. Often you have to manually search for drivers. How to connect a PS3 gamepad to a PC via Bluetooth or USB? You will have to download a driver search program and use it. To date, Play Station does not have official applications, allowing you to download drivers for gamepads on your PC. Therefore, you have to turn to the help of third-party programs.

The leader here is MotioninJoy. To use it, just follow the instructions:

1. Download latest version program and install it on your computer.
2. Connect when USB help joystick from PS3. It is advisable to charge it in advance.
3. Launch MotioninJoy. Go to the Driver Manager tab.
4. Check mark required driver for the device and click on Load driver.
5. Go to Profiles and select Select one mode.
6. Check the box next to Custom.
7. Save changes.

Please note that MotioninJoy allows you to customize the gamepad for yourself. There is nothing special about this process. Simply go to the appropriate application tab and then save the changed settings.

Via Bluetooth

How to connect a PS3 joystick to a computer using Bluetooth? This can be done in a few minutes. IN mandatory you must complete all the steps listed above. First connect the gamepad when Bluetooth assistance to the computer.

What now? The PS3 joystick is connected as follows:

1. Open MotioninJoy.
2. Go to the BluetoothPair tab. Open "Bluetooth" there.
3. Select the required adapter. Click on Pair Now.
4. After some time, a slight vibration will pass through the joystick. This is a signal of a correctly completed connection.

No further action is required. It’s clear how to connect a PS3 gamepad to a PC. Windows 10 or any other OS is not that important. The main thing is that the process is the same everywhere.

DualShock 3

More and more often, players need to connect the DualShock 3 to a PC. This process will be slightly different from the previously proposed algorithm. For example, you will have to work with another application. Or rather, several programs.

How to connect a PS3 gamepad to a computer? All you need to do is follow some simple instructions. Namely:

1. Download the latest driver for Sixaxis. Usually the archive contains several files: USB Sixaxis, PPJOY, BtSix.
2. Install the application. To do this, PPJOY and LibUSB are initialized.
3. Unpack BtSix to any convenient place. It is best to choose a desktop for this venture.
4. Connect Bluetooth Dongle. Next you will have to update the drivers for it. You can find the software in BtSix, in the Driver XP directory.
5. Open PPJOY. Run Config Joysticks from there.
6. Add new object and give it a name. For example, Joystick 1.
7. Reconfigure the gamepad buttons for the user. To do this, you need to save all changes in PPJOY. You can do without this step.
8. Close Config Joysticks.
9. How to connect a PS3 gamepad to PC? To do this, you need to establish a connection between Sixaxis and the Bluetooth Dongle. After this step, you can enjoy the results.

Connecting the DualShock 3 sometimes causes problems. In particular, due to the synchronization of programs with the gamepad. How to carry out the process correctly? This will be discussed further!

Synchronization

The first stage is Sixaxis registration. This procedure boils down to the following steps:

1. Connect the joystick to the computer using USB. The first connection will result in operating system will begin searching and installing drivers.
2. Launch the previously unpacked BtSix.
3. Click on the Address button in the application.

At this stage, the joystick will be registered. But that's not all! How to connect a PS3 gamepad to PC? It is suggested to complete the actions by synchronizing the device with the Bluetooth Dongle.

What will it take? Need to:

1. Connect Bluetooth Dongle to PC.
2. Launch BtSix. Be sure to unpack the application before starting the process.
3. Press the button in the center of Sixaxis once.

Now you can check the functionality of the joystick. As a rule, the actions taken lead to the fact that he starts working on the computer. That's it! From now on, it’s clear how to connect a PS3 gamepad to a PC. Practice shows that not all BT adapters are compatible with a joystick. Every user should pay attention to this nuance.

The main problems connecting a PS3 gamepad are finding drivers for it. By following these instructions, you can easily play using the Play Station 3 joystick. Even a novice user can cope with the task. The main thing is to find necessary programs to implement the idea.

When releasing the Playstation 3 to the market, Sony, for some reason, decided that the unique ecosystem of the console would be a huge advantage over its competitors - and therefore doomed developers to have difficulty porting their games to a unique architecture. This also affected the company’s joysticks - while Xbox joysticks connect to a computer (PC) without problems, it is problematic to “make friends” with the Dualshock from the Playstation 3 era with a PC. However, not everything is so complicated - and in this article we will talk about the most popular ways to connect Playstation 3 joysticks to a computer.

In general, the computer will be able to recognize the connected Dualshock – and you will even be able to play some (mostly emulated) games. The problem is that Sony gamepads work with technology DirectInput control, while the PC standard is X-input. It is for this transition that special programs are needed.

Motionjoy program

First, let's decide what we need:

Connecting Dualshock 3 to PC via MotionJoy

Connect the PS3 gamepad to the PC and open the MotionJoy application. In the upper left corner of the program we see the tab “ DriverManager" and go here. If you connected the controller, under the inscription “ HardwareLocation» the joystick symbol should appear. As a rule, the connected port itself is indicated, as in the screenshot.

Click on the joystick symbol (Port_#0001.Hub_#0003 in the photo above) and a small menu will appear under it, click on LoadDriver and wait a bit. When MotioninJoy appears under the caption green tick, the driver will be downloaded. Despite the fact that the driver itself weighs only a few megabytes, the download can take a long time, since it comes from the utility’s personal server, and the download speed often does not exceed 50-100 kb/s.

Now go to the “ Profiles"(left top corner in MotionJoy). A joystick will be displayed in the “Connected game controller” window, and just below you will be offered several emulation options to choose from. Most often you will be interested in “ X-inputDefault", like the Xbox 360. That is, in fact, we emulate the Xbox gamepad. Options with PS1 and PS2 are needed in order to run games from these platforms through the emulator, and the settings below will help you adjust the vibration motors and the LED on the gamepad.

If MotionJoy does not see the gamepad

It happens that the DS3 tool (aka Motion Joy) does not see the PS3 joystick. In this case, you need to do two things:

1. Check if there is a problem with the cable (when connected to a computer, the LED on the joystick should light up).
2. Connect the controller after going to the Driver Manager tab in MotionJoy.

That, in general, is all - nothing complicated about connecting Dualshock to PC via MotionJoy no. But let’s look at another, alternative, method.

Connecting a Playstation 3 gamepad to a PC using the SCPToolkit program

First, we need to download the utility and install it. Please note that SCP Toolkit will offer many options when installing. So, for example, Dualshock 3 is a gamepad from PS3, and Dualshock 4 is from PS4, so install the required version. Also worth disableBluetooth if you are going to use the joystick via cable. After installation, be sure to click on “Run Driver Installer” - this will install the drivers for the Xbox 360 gamepad on your computer.

After installing the driver, connect the PS3 controller to the computer, the utility screen will display something like this:

When the computer detects the gamepad, the " Next", click it and proceed to start the emulation.

This screen will show all gamepads connected to the computer.

The advantage of SCPTools over Motion Joy is that it responds adequately to Bluetooth connections and has open source code . Also, the developers of this utility were able to quickly create an emulator for Dualshock 4, which significantly increased the popularity of the program.

Connecting DualShock3 to Android using Sixaxis

Let's make a reservation right away - only users with Root access To Android system can use this emulator. Therefore, if you do not want to delve into the system of your mobile phone, it is better not to mess with the Dualshock connection procedure.

Second important point – smartphone compatibility. To check it, just download the Sixaxis Compatibility Checker application and see if the smartphone is on the list.

If the device is on the list, then download the Sixaxis Pair Tool program to your PC.

And one more thing - it is important to understand that the Dualshock will only work in those games that have special control settings for the gamepad.

A gamepad (joystick in common parlance) is extremely convenient tool for games. Majority modern projects on PCs in the gaming industry are designed to work specifically with the Xbox 360 gamepad or Xbox One. There are small exceptions when the game is also able to distinguish a Sony gamepad, but this is very rare.

However, what if you don’t have expensive accessories like a Microsoft or Sony gamepad? Let's say that you purchased a completely ordinary gamepad from a not very popular company, for example, DeTech, which modern games they simply refuse to detect it. How to set up a joystick on a PC for games of this type?

To play games on a PC, you don’t need to have a gamepad from a popular company: for proper operation You can configure any gamepad. It is in this article that we will look at various ways settings for regular joysticks.

How to set up a joystick on a PC for games?

So, you have at your disposal an inexpensive, but good gamepad, which is not registered in any way by any modern toy. Why is this happening? The thing is that most inexpensive gamepads are made using the DirectInput input standard, which allows you to reassign buttons on the device.

Most games are designed to work with devices that use the XInput standard, which ensures full compatibility with the Xbox 360 gamepad. Simply put, a gamepad with XInput input will be detected in almost every game (yes, there are exceptions) as an Xbox 360 gamepad. DirectInput gamepad. accordingly, it won’t. Yes, in some games it will be able to be identified as a control device, but setting up the joystick control in this case will be incredibly problematic, and sometimes even impossible.

Don’t throw your DirectInput joystick into the trash and run out and buy a branded device, right? Right! Using a program called x360ce, you can make all games think that you have an Xbox 360 gamepad connected.

First, you need to go to the official website of the developer of this emulator (that’s exactly what it is) and download it to your computer. First of all, you need to decide what bit size your game is. All modern games are 64-bit applications, while most older games are 32-bit. After downloading the desired version of the x360ce emulator, place its executable file (x360ce_x64.exe or x360ce.exe) in the folder with the game executable file.

Ok, we did it. Okay, now you need to configure the emulator itself to work in the game with your gamepad. Connect the gamepad to your computer and run the x360ce emulator executive file, located in the folder with your game. The following x360ce emulator window should open in front of you:

The emulator will tell you what to do with it correct operation requires the xiput1_3.dll file and will prompt you to create it. Click on the “Create” button to have the emulator create this file in your game folder. Next, you should see something like the following picture:

Check the box next to " Automatic search Settings”, as well as a checkmark next to the “Search on the Internet” option. Then click on the “Next” button, after which the following window should appear in front of you if everything went as it should:

Now a window with settings for the layout of the gamepad buttons should appear in front of you. Take the connected gamepad in your hands and try to press a few buttons on it, if everything went well, you will see button press signals. If not, then in your “Controller” tab the red square will be lit and there will be no click signals.

If this situation occurs to you, then of course you can start trying to set different profiles for the controller in the layout settings, but we recommend that you simply collect the layout and then configure it yourself. To do this, click on the “Clear” button, after which you will get a clean screen like this:

Now all you have to do is assign each button to your gamepad individually. To do this, click on the button's drop-down menu, select "Record" (with a red circle), and then press the button on the controller to assign it to the selected location. You should get something like this (depending on the gamepad):

Assign the keys to your controller to match those on your Xbox 360 controller. Once you're done, click on the "Save" button and close the x360ce emulator window. Then launch the game you need and make sure that the emulator settings have been made correctly.

That's it. Using the x360ce emulator, you can make many video games think that a regular gamepad connected to your computer is a gamepad from the Xbox 360 console. Finally, I would like to point out one more small aspect of this whole problem: some gamepads are able to switch between DirectInput and XInput modes, for example, some Device models from Logitech are capable of this.

If you have such a gamepad at your disposal, then you do not need to use the x360ce emulator or another software- just switch it to XInput mode and all games will think that an Xbox 360 gamepad is connected to the PC.

Found a typo? Select the text and press Ctrl + Enter

Quite often, people buy joysticks for laptops and computers for entertainment. It is needed for a comfortable game. However, many people can simply purchase such a thing, but not everyone can configure it correctly.

Instructions