Complete data reset on LG smartphones. How to reset LG to factory settings: instructions and recommendations

It is a widely known fact about the reluctance of the Slavic soul to walk on service centers. Striving for self-repair Apparently it’s been in our blood for a long time. But the “poke” method does not always end well – more often than not it ends badly. Today we will look at hard reboot ( hard reset) on LG phones.

What you need

1.Your LG phone

Instructions

A hard reboot (aka hard reset) will allow you to delete all information from the phone, just like everyone else installed programs, except standard ones. The event is risky, but sometimes necessary. Since there are too many phone models, some of them may have different key combinations.

1. Probably the most used and widely known method is using a key combination. To activate it you will need turn off the phone, then press the following buttons simultaneously: Volume Down, Call and the key responsible for turning on the device - Power.

2. Second way uses service code. A service code is a sequence of characters that the phone perceives as a command to perform a certain action, which, in turn, is hardwired into it at the factory.

Due to the huge variety of models and firmware for them, service codes for the same command (in in this case we are interested in hard reset) differ in symbols, but have approximately similar appearance. To find out which combination you need, read the instructions or use the services of the official website or those. support.

The service code is entered directly in the phone's standby mode, just like if you were dialing someone's number, only instead of the digits of the number you need to dial the service code.

Let's take for example LG P970 Optimus. Service code for such a device will look like: 3845#*970# . After successful input, a picture will appear on the screen (on the left), and after selecting an item, the menu will change to the view (on the right), where you will be required to perform the second item - “Factory reset”.

Be sure to check the information on your phone on the official websites of the manufacturer to avoid accidents.

Worth paying attention

You will need to hold down the buttons about 10 seconds, this was done by the manufacturer in order to protect you from an accidental hard reset.

In this manual, we will tell you how to reset settings on LG. There are several ways to solve this question and all of them are essentially universal and valid for almost all models mobile devices companies. Let us immediately note that Hard Reset on LG will erase all data from the smartphone, except for files located on the memory card, so copy all important files to your computer in advance.

Method one - settings menu

When asked how to format an LG, the first thing that comes to mind is to perform a reset through the settings. On your mobile device, go to Settings (List view) – Backup and reset – Reset settings. In the menu that opens, you can view information about what will be deleted. After reading, click the “Reset phone settings” button. Below are pictures with the same manipulations, but with the menu installed in the “Tabs” view.

The second method is through service menu on LG

IN this method You will get to know a little about the service menu of your smartphone. It is worth noting that the entered code, which is presented below, is universal for mobile devices from LG, however, there are also special entered characters for each model separately. Open the dialer and enter 3845#*model number#. Instead of the model number, you need to enter the number of your device. For example, let's take the LG G2 D802 and in this case we dial 3845#*802#, after which the service menu will appear instantly. There is no need to press the call key. Next, scroll to the bottom of the menu and click “ Factory Reset" A confirmation request will appear and press the button again.

Method three - Hard Reset on LG

This solution is more suitable for the case where the above methods cannot be applied because the smartphone is frozen or does not turn on to get to the menu. Press the power button trying to turn on the device, then press the “Volume Down” key and the “Power” button. Within a few seconds, the LG logo will appear, and at this time you only need to release the “Power” button and press it again. After this, a menu should appear as in the image below. By pressing the volume rocker you make a choice on given by the system question, and use the “Power” key to confirm your choice. Select the “Yes” item and wait for the operation to complete. Afterwards, the smartphone reboots – the LG hard reset has been completed successfully.

Method four – Recovery Mode

As in the third method, you need to manipulate physical buttons device, but this time a little differently. When the smartphone is turned off, press the “Volume Down” and “Power” buttons, and as soon as the logo appears, release them and press them again. In some models, a combination of the “Volume Up” key and the “Power” button is possible. Ultimately, an image should appear on the screen, as in the picture or similar. Use the volume rocker to move down to the words “wipe data/factory reset” and press the “Power” button. Select “Yes”.

G3 - hard reset, remove graphic key, a way to remove a password

There are often bad enough situations with phones that require a complete reset.
Often phone owners come to the service with any problems, among which, say, the following: “I installed a graphic pattern and now I forgot... I can’t unlock the password or pattern... I forgot from my email box on Google password...What should I do?"

And there are already a lot of such people, because progress does not stand still, and mobile phones more than enough different functions.
Today we will tell you how to reset settings or do a hard reset on phones such as:
- LG G3 S LTE D722;
- LG G3 S D724;
- LG G3 Stylus D690;
- LG G3 Dual-LTE D856;
- LG G3 D855.

Sometimes you need to return your phone to factory settings in other situations that happen all the time. For example, it is worth entering the graphic key incorrectly several times on and, just as in the case of a PIN code on the card, after several wrong attempts the mobile will be blocked.

And if you remember about the multitude of games, pictures, music and programs downloaded from a wide variety of and not always reliable sources? Very often they cause big problems with the work of telephones. If you have a phone of one of the models listed above and it is slow, then it is possible that this is the reason.

And if the LG G3 freezes without turning on at all, then it is probably necessary hard reboot- so-called Hard Reset LG G3.
The reset procedure, in general, is almost the same for all phone models, because they already have such a menu in the settings. However, there are still certain important differences, which you need to know about, because cell phones There are a lot of models now.

Any problems telephone system can be solved by resetting the settings. This function is similar to “System Restore” on a computer with a rollback to a certain point.

But you should be careful. After all, when you return to the “original” settings, the information recorded on the phone will also disappear: games, favorite music, photos and applications. Only the data from external card memory. So if you decide to do this, sync or copy your data first.

So, there are two main ways to reset your LG G3 phone:

The first way to hard reset LG G3

We turn on the phone by reinstalling the battery or the "Power" button.
Go to the menu " Settings". There we select or item " Recovery and reset", or " Backup and reset".
Making a team choice" Reset data", Then " Reset the device".
And finally, the last stage of our task is selecting the item " Delete everything".

Second hard reset LG G3

This one is well suited for those whose LG G3 does not boot, freezes, slows down very much, does not turn on completely, or does not have access to the regular phone menu.
In order to start using this method, you need to turn off your phone.
Press the "Power" and "Volume Down" buttons at the same time.

The LG logo will appear - immediately remove your finger from the "Power" button and immediately press it again! (On some models you will need to immediately release two buttons and then press them back).
A window will pop up confirming the reset - release the pressed keys.
In the menu (by adjusting the volume), select the “Yes” command, the same “Power” button will help with this.

The next step is to confirm Reset settings again.
Wait until the process is finished. That's it, LG G3 is ready for smooth operation again!

Well, that's all, actually. Simple steps make it possible to adjust the operation of the phone and save all the data on it.
By the way, many mobile phones have a video guide that explains the possibility of resetting all settings. Many people are afraid to do a Hard Reset, because... Upgrading a phone, say, the same LG G3, is quite difficult again, because once upon a time it required considerable effort.
It’s worth giving advice for the future - try to be careful from now on graphic drawings, different keys, passwords and downloaded games, applications, pictures and music from nowhere.

We have all heard the word called factory reset, especially in relation to our phone. Let us explain the main meaning of resetting settings. Factory reset or better known as factory reset is a method in which any electronic device returns to initial setup. This completely erases all information stored on the device, so it returns to the original manufacturer settings. But why do we need to factory reset LG phone?

The answer to this question would be that your phone or electronic devices encounter any malfunction, you forgot your PIN or lock password, you need to delete a file or virus, factory reset – best option to save your phone and reuse it as a new one.

Note. A factory reset should not be performed unless necessary as it will remove all important information on your phone.

In this article we will focus on different methods which you can use to factory reset your LG phone.

How to do hard reset LG phone using key combination:

1. Turn off your phone.

2. Press and hold the Volume Down key and the Power/Lock key located on the back of the phone at the same time.

3. Once the LG logo appears on the screen, release the Power button for a second, but immediately hold and press the key again.

4. When the Factory hard reset screen appears, release all keys.

5. Now to continue, press the Power/Lock key or Volume keys to cancel LG factory reset.

6. Once again, to continue, press the Power/Lock key or Volume keys to cancel the procedure.

How to reset LG phone when locked?

This is one of the most common reasons for factory resets.

Here detailed instructions which contains more ways:

Have you ever forgotten your phone password and been locked out? No, yes, maybe? Well, many of us, I am sure, must have faced this situation, especially after you have bought yourself a new device, and it is very frustrating.

Let's find out today how to get rid of this situation as easily and quickly as possible.

There is actually an easy way to reset your LG phone and it can be done with using Android Device Manager. The Android Device Manager app or website can be used to remote deletion devices. We know that everything Android devices are configured with a Google account and act as a path to delete a phone connected to a specific Google account remotely.

Reset LG using Android Device Manager website.

Remotely deleting a device deletes all data stored on the device. Below are the steps:

To select a device that has factory settings, click the arrow. Which is next to the device name and you will see the location of that device.

Once you select the device you want to remove, you will find 3 options: Ring, Lock and Erase as shown below.

Click Erase, the third option, and this will permanently delete all data on the selected device. This will take a few minutes.

How to reset LG using Android Device Manager app

The Android Device Manager app can also be installed on any Android phone to remove a configured Google account device.

Install Android app Device Manager to the device you plan to use for erasing.