• A program that measures fps in games. FPS in games - where to see this necessary indicator

    If you want to know how to see FPS in a game, then you most likely decided to measure the performance of your computer. This is quite difficult to do by eye, but, fortunately, there are special programs that display the current number of frames per second on the screen. And the best of such applications will be discussed in this article.

    Fraps

    This utility is primarily designed for video recording. However, it does have other features, including the ability to display frames per second. Before you can see how much FPS is in the game, you need to install Fraps and then do the following:

    As you probably understood, the main advantage of such a utility is its simplicity. However, Fraps also has one significant drawback. Thus, the program has very few settings, and also does not show any additional data about the state of the system and the load on individual components. However, Fraps is distributed free of charge, so you don’t have to worry about wasting your money.

    Steam

    Not everyone knows, but such an opportunity to see FPS in a game is available in the client of the popular digital store Steam. It's not surprising. After all, to enable it, you first need to delve into the settings. This is done like this:


    No further manipulations will be required from you, and the frame counter will be displayed on the screen automatically. Just keep in mind that before you can watch the FPS in the game, you will need to first buy it on Steam or add it as a third-party application.

    The advantage of this method is that there is no need to install individual programs to calculate the frame rate. Of course, provided that you actively use Steam. As for the minus, it, as in the case of Fraps, lies in the low information content.

    MSI Afterburner

    A powerful program that allows you to both check the FPS in the game and overclock your video card, thereby increasing the frame rate. Unfortunately, the frame rate counter is disabled by default for some reason, and you will have to run it yourself. This can be done as follows:


    On this useful features The utilities don't end there. So, by setting the appropriate parameters in the already familiar “Monitoring” section, you can monitor not only FPS, but also, for example, the load on the video card and processor, their temperature, the used size of the paging file and many other indicators. Based on this data, it will be easier for you to understand which part of your computer is weak link.

    FPS Monitor

    Well, finally, professional program, created solely for monitoring frame rate, as well as other related parameters. In addition, the developers of this utility constantly update it, optimizing it for modern operating systems. Simply put, if you are thinking about how to view FPS in games on Windows 10, then FPS Monitor is definitely your choice.

    To start tracking your frame rate, just run the program simultaneously with the game. Once you do this, you will see an overlay appear in the left top corner screen.

    The need to check FPS in a game arises in different situations. For example, information about FPS may be needed to select the optimal settings for a new game or to compare the performance of two different video cards. Be that as it may, you will need a special program to solve this problem. In this material we will look at the 3 most popular programs with which you can find out the FPS in the game.

    Perhaps the easiest way to see what FPS is in the game is to use Fraps program. This program is designed to take screenshots and record videos during the game. But, in addition to its main purpose, it also has secondary functions. For example, displaying the frame counter on the computer screen during operation full screen programs or computer games. It is this function that allows you to find out how many FPS the game produces with your hardware.

    The main advantage of Fraps over other FPS viewing programs is its ease of use. In order to see the FPS in the game, you just need to launch Fraps, and then the game itself. After which a frame counter will appear in the upper left corner of the screen. If there is no frame counter, then look at the Fraps settings on the “FPS” tab, the angle should be selected there to display the counter.

    On the downside, Fraps has very little customization and doesn't provide any additional system or game data. In addition, on some modern games Fraps may not work at all.

    Fraps is paid program, but in order to view FPS you do not have to buy it, the trial version is enough. You can download the program.

    MSI Afterburner is a powerful program for overclocking your video card and tracking FPS

    MSI Afterburner is a program for overclocking a video card. With its help you can raise clock frequency graphics chip and memory, and also increase the voltage by graphics chip. But, besides this, using MSI Afterburner you can monitor large number different computer operating parameters during the game. Among other things, you can monitor FPS.

    The main advantage of MSI Afterburner is the large number different possibilities. But, in order to take advantage of these features, you will have to tinker a little with the settings. In the program settings, you need to go to the “Monitoring” tab, select the option for monitoring there and enable the “Show in Overlay Screen Display” function. This operation you need to repeat for all the parameters that you want to track during the game, after which you need to save the settings using the “Ok” button. After saving the settings, you can launch the game and look at the FPS.

    FPS monitor – professional solution for viewing FPS

    FPS Monitor is a program that was created specifically for viewing FPS in games. It allows you to monitor and display FPS, as well as many other parameters of your computer. For example, with using FPS Monitor can also monitor CPU and video card load, CPU and video card clock speeds, load RAM and much more.

    The main advantage of FPS Monitor is its narrow specialization and a large number of settings, some of which are not found in other similar programs. For example, FPS Monitor allows you to manually set the location where information will be displayed on the screen.

    The disadvantage of FPS Monitor is that this program paid. You can use a trial version, but then the program's capabilities will be limited, and a message will be displayed on the screen stating that this is a Demo version. You can download the program.

    There is a list of programs whose functionality includes the function of displaying FPS in the game. But what is it? FPS is the number of frames per second that the user sees on the PC screen during the game. The higher this indicator, the better. This is especially true for shooters. Special programs propose to monitor this value. Let's take a closer look at them.

    One of the most famous representatives this list. Fraps functionality includes recording video from the screen, taking screenshots and, of course, it is suitable for measuring FPS in games. Fraps works on top of all windows, so you don’t have to switch between processes.

    This program has a simple interface and little functionality, but it is quite sufficient for the purposes for which Fraps is downloaded. The trial version is distributed free of charge and is enough to understand whether the program is worthy of attention.

    СAM

    CAM is designed to monitor the entire system as a whole. It is also suitable for viewing frame counts in games. In addition to this information, the screen displays the load on the processor and video card, and their temperatures. It contains everything you need to be constantly aware of the status of your PC.

    The program is distributed absolutely free of charge and is in Russian. CAM will always notify you of critical loads or system temperatures, which will help avoid system failures. All notifications can be configured in the corresponding menu.

    FPS Monitor

    The name speaks for itself. The program is great for showing FPS in games, and also helps to monitor other system parameters. There are several prepared scenes for different operating modes.

    Distributed trial version free and has limited functionality. Full version costs 400 rubles and has no restrictions. All versions have Russian interface language.

    Overwolf

    The main goal of this representative is not the FPS counter, but the creation of various interfaces for games. However, you can set the fps monitoring option in the settings. After this, you just need to go into the game with the program turned on and the indicator will be displayed in the place that you specified in the settings.

    It is distributed absolutely free of charge, almost the entire interface is translated into Russian and there are many add-ons that can be downloaded or purchased in the internal store. Installed plugins and skins are placed in the library.

    MSI Afterburner

    A multifunctional program that will help you set up your computer and improve its performance. With MSI Afterburner you can set performance or graphics settings, change cooler settings and much more.

    The program's functionality includes full system monitoring, including displaying the number of frames per second in games.

    Using Autoburner, you can overclock your video card, but you should only do this experienced users. The program is distributed completely free of charge, but is not fully Russified.

    System monitoring in games may be needed in various situations. For example, such monitoring is used when testing new computer components or new games. Also, system monitoring can be useful when selecting optimal settings games. In this article we will look at the two most popular programs that can be used to solve this problem.

    MSI Afterburner is popular program to overclock a video card. It allows you to increase the clock frequency GPU, voltage on the graphics processor, memory clock speed, as well as other parameters of the video card. Despite the fact that MSI Afterburner is a development by MSI, this program can be used with video cards from any manufacturer. At the same time, both video cards with GPUs from AMD and NVIDIA are supported.

    But, MSI program Afterburner can be useful even for those users who are not into overclocking components. For example, MSI Afterburner can be used to monitor the system in games. This opportunity appears thanks to the utility RivaTuner Statistics Server, which is installed with MSI Afterburner.

    In order to use system monitoring you need to go to MSI settings Afterburner, go to the "Monitoring" tab and turn on the display required parameters in an overlay screen display (OED).

    The choice of parameters that can be added to system monitoring is quite wide. For example, MSI Afterburner help can be followed by:

    • current, average and minimum, as well as frame time;
    • temperature, clock frequency and GPU load;
    • temperature central processor and its loading for each of the cores;
    • cooler rotation speed;
    • loading RAM;

    After saving the settings, you need to launch the game without closing MSI Afterburner. If everything was done correctly, system monitoring will appear in the upper left corner of the screen.

    You can read more about how to install MSI Afterburner and configure it for system monitoring in ours.

    FPS monitor

    FPS monitor is a program specially designed for system monitoring in games. FPS monitor can output detailed information about the system directly on the screen on top of any game. In this case, information can be displayed as in text form, and in the form of graphs.

    System monitoring in the FPS monitor program can include a variety of parameters. For example, you can use it to track:

    • current FPS, minimum FPS, average FPS, as well as frame time;
    • temperature and load of the graphics processor, its clock frequency and rotation speed of the coolers on the video card;
    • temperature, load and clock speed of the central processor for each core, rotation speed of the cooler on the central processor;
    • loading RAM;
    • Internet use;

    A distinctive feature of FPS monitor is that this program allows you to configure the placement of system monitoring on the screen. System monitoring can be placed anywhere on the screen, and it can also be divided into several parts and placed in different places.

    The big advantage of FPS monitor over MSI Afterburner is that this program does not require any configuration. In order to use system monitoring, you just need to launch the FPS monitor program, and then start the game.

    It should be noted that unlike MSI Afterburner, FPS program monitor is paid. But, it costs only 350 rubles and can be used in demo mode. The only limitation of the demo mode is the message asking you to activate the program.

    Good afternoon.

    The performance of the video card directly influences the speed of games (especially new games). By the way, games are also one of the best programs for testing the computer as a whole (in the same special testing programs, separate “pieces” of games are often used, from which the number of frames per second is measured).

    Usually they carry out testing when they want to compare a video card with other models. For many users, the performance of a video card is measured only by memory (although in fact, sometimes cards with 1Gb of memory work faster than with 2Gb. The fact is that the amount of memory plays a role to a certain extent*, but it is also important what kind of processor is installed on the video card , bus frequency, etc. parameters).

    In this article I would like to consider several options for testing a video card for performance and stability.

    Important!

    1) By the way, before you start testing the video card, you need to update (install) the drivers for it. The easiest way to do this is using special. programs for automatic search and driver installation:

    2) Video card performance is usually measured by the number of FPS (frames per second) produced in various games at various settings graphics. A good indicator for many games is considered to be 60 FPS. But for some games (for example, turn-based strategies), the 30 FPS bar is also a very acceptable value...

    FurMark

    An excellent and simple utility for testing a wide variety of video cards. I myself, of course, don’t test that often, but out of more than several dozen models, I haven’t come across a single one that the program couldn’t work with.

    FurMark performs stress testing by heating the video card adapter to maximum. This way the card is checked for maximum performance and stability. By the way, the stability of the computer is checked in general, so, for example, if the power supply is not strong enough to ensure the operation of the video card, the computer may simply reboot...

    How to test?

    1. Close all programs that can heavily load your PC (games, torrents, videos, etc.).

    2. Install and run the program. By the way, it usually automatically detects your video card model, its temperature, and available screen resolution modes.

    3. After selecting the resolution (in my case, the standard resolution for a laptop is 1366x768), you can start the test: to do this, click on the CPU Benchmark Present 720 or CPU Stress test button.

    4. Card testing will start. At this time, it is better not to touch the PC. The test usually lasts a few minutes (the percentage of test time remaining will be displayed at the top of the screen).

    4. After this, FurMark will present you with the results: all the characteristics of your computer (laptop), video card temperature (maximum), number of frames per second, etc. will be indicated here.

    To compare your performance with the performance of other users, you need to click the Submit button.

    5. In the browser window that opens, you can see not only your submitted results (with the number of points scored), but also the results of other users, and compare the number of points.

    OCCT

    This is the name for Russian-speaking users to recall OST (industry standard...). There's nothing with the awning general program does not have, but check a video card with a fairly high quality bar - it is more than capable of this!

    The program is capable of testing the video card in various modes:

    With support for various pixel shaders;

    With different DirectX (9 and 11 versions);

    Check the card at a user-specified time;

    Save test schedules for the user.

    How to test a card in OCCT?

    1) Go to the GPU: 3D (Graphics Processor Unit) tab. Next you need to set the basic settings:

    Testing time (even 15-20 minutes are enough to test a video card, during which the main parameters and errors will be identified);

    Resolution and pixel shaders;

    It is highly advisable to enable the checkbox to search for and check errors during testing.

    In most cases, you can only change the time and run the test (the program will configure everything else automatically).

    2) During the test, in the upper left corner, you can observe various parameters: card temperature, number of frames per second (FPS), testing time, etc.

    3) After the test is completed, on the right, on the program graphs you can see the temperatures and FPS indicator (in my case, when the video card processor was loaded at 72% (DirectX 11, squeak shaders 4.0, resolution 1366x768) - the video card produced 52 FPS).

    Particular attention should be paid to errors during testing (Errors) - their number should be zero.

    Test errors.

    In general, usually after 5-10 minutes. It becomes clear how the video card behaves and what it is capable of. This test allows you to check for kernel (GPU) failures and memory performance. In any case, the check should not include the following points:

    Computer freezes;

    The monitor blinks or turns off, the picture disappears from the screen or freezes;

    Blue screens;

    Significant increase in temperature, overheating (the temperature of the video card above 85 degrees Celsius is undesirable. The causes of overheating can be: dust, a broken cooler, poor ventilation of the case, etc.);

    Error messages appear.

    Important! By the way, some errors (for example, blue screen, computer freezes, etc.) can be caused by “incorrect” operation of drivers or Windows OS. It is recommended to reinstall/update them and test the operation again.

    Probably one of the most famous testing programs. Most of the test results published in various publications, websites, etc. - were carried out in it.

    3D Mark 11 - for testing video cards that support DirectX 11.0. This is where I will focus in this article.

    There are several versions available for download on the official website (there are paid ones, and there is a free version - Free Basic Edition). We will choose a free one for our test; besides, its capabilities are more than enough for most users.

    How to test?

    1) Launch the program, select the “Benchmark test only” option and click the Run 3D Mark button (see screenshot below).

    2. Next, various tests begin to load in turn: first the bottom of the sea ocean, then the jungle, pyramids, etc. Each test checks how the processor and video card will behave when processing various data.

    3. Testing lasts about 10-15 minutes. If there were no errors during the test, after closing the last test, a tab with your results will open in your browser.

    Your results and FPS measurements can be compared with other participants. By the way, best results are shown in the most prominent place on the site (you can immediately evaluate the best gaming video cards).

    All the best...

    Read more: