iPhone 5 s is difficult to hear the interlocutor. Poor audibility from the interlocutor on the IPhone

Apple has been the sales leader for many years mobile phones And computer equipment. Its products are distinguished by functionality and quality - these are the properties that attract customers. They are also stylish appearance, the ability to update programs, high quality camera and many others useful features. However, many owners of such smartphones often face an unpleasant situation when they have difficulty hearing. iPhone interlocutor(“iPhone”), and are at a loss, not knowing what to do.

Faced with such a problem, owners file claims against the manufacturer without having time to remove the film from the new device. Simply cleaning the holes or freeing up access to the speaker can eliminate this nuisance.

Reasons why the interlocutor of the iPhone (iPhone) cannot hear well

If it is difficult to hear your interlocutor through a smartphone, first of all, you need to check its settings. It is possible that the speaker volume is set to minimum. Despite its simplicity, the case is very common.

Another reason is that the speaker hole is clogged. If you always carry your mobile phone in your pocket without a case, then over time it could become clogged with lint from your clothes. You can get rid of any dirt using a soft brush, after which audibility will be restored. One of the most common reasons why a device malfunctions is careless handling. If you adhere to the operating rules, you will rarely contact the service center for repairs.

In some cases, hearing problems are directly related to a malfunction of the headset. In this case, the smartphone recognizes the headphones, despite the fact that they are connected, and as a result the volume will be reduced. So insert the headphones and then pull them out sharply. If the sound is restored, this indicates a problem with the phone, so you will have to seek help from specialists.

If you have done all the above steps, but have not achieved results, you will most likely have to replace the top speaker. Its functionality cannot be restored: it is a non-separable, cast part, so such an element cannot be cleaned. In our service center, it will be replaced by qualified specialists, and the process itself will not take much time.

Main reasons:

Reboot phone if this is the first time the problem has appeared. To do this, you need to turn off your phone and turn it on again. After this, contact the service center. Timely seeking professional help will help significantly reduce the cost of repairs.
Firmware failure. If the sound disappears periodically, sometimes it works fine. In this case, you need to update the firmware on the iPhone 6;
Third party programs. Quiet sound during a phone conversation may appear due to third-party software. Check if you have installed lately any programs that could affect the audio settings on the system. IN in this case You need to uninstall the programs and restart your iPhone. As a rule, after such actions the problem disappears.
Quiet mode lever is in the “mute” position, and a red mark on the lever is visible on the phone. The lever should be switched to another position.
Headphones or the portable speakers were not removed correctly, so quiet sound the interlocutor may appear suddenly. Therefore, we recommend that you remember whether you connected headphones before this problem appeared. Try inserting the headphone plug into the socket again and carefully pulling it out. If this does not help, the problem may be a damaged upper cable or audio jack.
Volume reduced to a minimum. If you have trouble hearing your interlocutor when talking on your iPhone, then first of all you should check whether the volume for calls in the system is set to low. To do this, press the volume up button during a call. If the volume is set to high level, but you still can’t hear the interlocutor - check if the problem occurs when talking with other people. It is possible that the cause of poor hearing is on the other side of the tube.
Speaker faulty. Most common reasons Its breakdown is caused by water getting inside, which causes a short circuit in the circuits of the system board. Also, the speaker begins to work poorly after dirt gets into it. If the protective mesh becomes clogged, it will be difficult to hear the subscriber.
Mechanical damage. If the phone is dropped, it can easily damage not only the speaker, but also the microphone. Falls and impacts may result in damage to the audio cable or speech codecs on the system board iPhone 6.
Dust ingress. To fix this problem, you need to disassemble the phone and clean the speaker holes; dust and dirt often get there. In this case, we recommend contacting the service center.

If after all the above methods the voice volume also sounds quiet or unclear, then the problem is completely solved.

Service center ITcom guarantees quick diagnostics of your device, as well as its high-quality repairs as soon as possible.

What to do if you just stopped hearing the caller?

When you notice the first symptoms of a breakdown, take the time to urgently contact a special ITcom service center in Kharkov, where you will be provided with technically correct and urgent assistance. At the same time, in order to resolve such issues, it is better to have one company in your contacts that has confirmed its professionalism and inspires trust. We may well become such a service, since we offer full spectrum repair services for modern iPhones and other simpler devices.
In addition to everything else, our specialists will advise you, indicate the cause of the malfunction, and give a guarantee for the work performed. As a result, your iPhone will work long and stably.

Attention, this is very important!

The main mistake of users- this is a solution to wait until the problem disappears on its own and the iPhone 6 fixes itself. , is not comparable to buying a new smartphone, so don’t put off going to the workshop.

Hello everyone! We continue and today we are finishing (for the next year - this is almost certain) the topic of manufacturing defects in iPhones. Next up is the new iPhone 7 and its larger brother, the iPhone 7 Plus. Did Apple engineers manage to make a wonderful gadget without any defects? Now let's see and find out...

Important note. Since the devices are new and have only recently appeared on sale, the article will be updated as information becomes available about new defects identified in the seventh iPhone. And you too can take part in this. Why not? If you have anything to add or you yourself have encountered any common defects in the iPhone 7 (Plus), then do not be lazy and be sure to write in the comments.

That's it, we're done with the introduction. Let's move on to the most important thing - defects. Let's begin!

iPhone 7 processor hiss

Just like that, trouble came from where it was definitely not expected. The new A10 Fusion processor installed in the iPhone 7 and iPhone 7 Plus turns out to hiss and make different sounds under heavy load. What is meant by heavy load? Games, watching videos online, testing in various programs etc. Moreover, as it turns out, this very processor (to be more precise, transistors or whatever happens on it) produces sounds on almost any iPhone 7. Somewhere it’s quieter, somewhere it’s louder, but in general, the “seven” hisses and that’s fact.

But what’s more interesting is that this is, if not normal, then close to it. Practically any iPhone makes similar noise, they just didn’t pay attention to it before. And then the hysteria began:)

Of course, when we say that any iPhone makes noise in this way, we mean quiet sound. If the sounds are strong, then it is better to turn off the device and return it under warranty; this is a definite defect. Appe knows about this and exchanges such iPhone 7s for new ones without any problems.

Problem with the speaker - it’s hard to hear the other person on the iPhone 7

In the comments to this article (thank you!), and on various other resources, many users note the fact that the sound of the speaker in the iPhone 7 is a little unusual - “like out of a barrel.” Considering the fact that some people are already taking their iPhones with a similar problem to the service (and they are changing them there!), we conclude that the iPhone 7 has a new defect - one that works poorly speaker. If possible, be sure to check when purchasing.

There are really two nuances here that you need to remember before running to the service. If your interlocutor is hard to hear on iPhone 7, then:

First, be sure to change your SIM card, especially if you have had it for a long time and are under Nano Sim was circumcised independently. Well, or just check with another, “normal” SIM card.
The iPhone 7 now has moisture protection, and such a dull sound during a call may be due to the presence of special protective membranes. Which, on the one hand, prevent moisture from getting inside the case, and on the other, slightly distort the sound during a conversation.

And that's all for now. On at the moment, there are no other known manufacturing defects in the iPhone 7 - perfect smartphone:) Of course, over time, defects will appear, where would we be without it. But for now, that's it.

The situation when the owner of an Apple device observes poor audibility of the interlocutor’s voice during a call is a fairly common problem. At the same time, if you set the call to loud mode connection, a voice appears. As the experience of many users shows, this problem is most often typical for gadgets of the sixth version. Repair shop specialists note that in iPhone 6, as well as iPhone 5, 5S and other Apple phone models, the sound disappears very often, which is the reason why the owners of these gadgets call for repairs.

If you have the problem of being unable to hear your interlocutor on an iPhone 6 or iPhone 5, read this article. It describes the most common causes of this problem and how to fix it.

Summarizing the experience of repair technicians, we can conclude that when the interlocutor is hard to hear on the iPhone 6, the reason for this is one of the following factors:

1 Device speaker failure. Moreover, the problem may lie in both the hardware and software parts of the device. It will be extremely difficult for the user to cope with such malfunctions on his own. However, it is worth mentioning some methods that may restore sound, and the owner of the smartphone will avoid going to a repair shop. 2 Influence third party programs and applications for sound quality. Few people think that serious violations can be caused by such a trivial reason. However, it should be excluded too. To do this, you need to look at what software you installed on your device, especially recently. Next you need to figure out which of the downloaded and installed programs could provide negative influence on iPhone audio settings. If any are found, the further course of action is very simple - you need to remove the programs from the smartphone. Usually, after this, the sound functions of the device are normalized, and the sound becomes clear and beautiful, as before. 3 The quiet mode lever is in the “mute” state. At the same time, the lever is marked in red. What is required from the user in such a situation? Nothing complicated - just switch the element to a different position. 4 Incorrect extraction portable speakers. Due to such a misunderstanding, of course, the sound cannot disappear completely, but its quality will deteriorate significantly. Most often the sound becomes quiet, like a whisper. Therefore, try not to forget whether you connected headphones to your device today, and was it after this action that the problem arose? If everything fits, the source of the problem, and therefore its solution, has been successfully found. In such a situation, it is necessary to reinsert the plug into the socket and then remove them. 5 Damage to the upper cable or audio connector. In this situation, as in the previous one, the sound does not completely disappear, but it becomes barely audible. Although, if the sound volume during a conversation is not very good, do not worry and immediately think that the device has serious malfunctions or breakdowns. You may have accidentally set the call volume on your device to low. If this is the problem, you just need to press the volume up button during a conversation.

First, you should turn off your phone and then turn it on again. If there is still no sound, you will have to take the device to a specialist for diagnostics. Remember that the sooner you turn to professionals, the cheaper the cost of repairs will cost you.

In a situation where the sound does not disappear completely, but disappears only sometimes, an action such as updating the firmware on iPhone 6 can help.

If the button is turned on, but the owner of an iPhone 6 still hears the interlocutor poorly or not at all, the possibility cannot be ruled out that the problem is not with his device, but with the device of the person he is calling.

6 Malfunctions (not breakdowns) of the speaker. This is often caused by moisture getting inside the case, which results in short circuit in the motherboard circuits. The same can be observed due to contamination of the element with small debris and dust. Specifically, the protective mesh is most often contaminated. And if this happens, audibility during a conversation may not be ideal. 7 Mechanical damage. Obviously, if the device is dropped or hit, the microphone or speaker may be damaged to some extent. According to the experience of specialists, the audio cable or speech codecs in the iPhone 6.8 system board are most often damaged by dust. A little has already been said above about this problem, but we will dwell on it again to say how to fix it. Logically, it is clear that in such a situation cleaning is necessary protective mesh from dust. To carry out this procedure, it is better to contact a repair shop. The service is inexpensive, and under the supervision of an experienced technician, it will be done efficiently and without damaging other parts of the smartphone.

Above were the main sources of problems with sound in iPhones 5 and 6. If, after performing all the steps to improve or restore the sound, it does not return or its quality leaves much to be desired, then serious repairs are indispensable. In such a situation, the matter is resolved, as a rule, not by repair, but by a complete replacement of such an important part as the auditory speaker.

The manufacturer himself gives a number of tips on how to correct the situation when the interlocutor is insufficiently audible when talking on iPhone 6. Below are the most effective of them. If you are faced with the problem of poor hearing on an Apple device, or, even worse, a complete lack of sound, take a closer look at these recommendations. Perhaps, with their help, you can fix the situation yourself, avoiding a trip to a repair shop and unnecessary expenses.

So, if you have problems implementing sound functions in smartphones, Apple advises:

Try increasing the sound volume. This is done simply - using the sound volume control buttons. During the process, you need to make sure that the sound level indicator appears on the display, i.e. its volume.
Check the audio headset connection. If a headset is connected to the device, there will be 100% sound in the speaker. To correct this situation, you need to perform only 2 steps:
Clean the receiver. Not for the first time throughout this article, we repeat that the reason for poor sound quality in an Apple phone can be simple contamination of the protective mesh of the receiver. To resolve this problem, Apple recommends taking the following steps:
Check the functionality of the receiver. If you suspect a problem with the receiver, do the following:
Reboot or update your smartphone. Often, doing one of these steps will resolve the audio issue on your device. To do this, you need to restart the iPhone and retest the system. If after this the sound does not appear, you need to update operating system up to the newest version.

Check that nothing has been plugged into the headphone jack.
Go to the gadget settings section, select Bluetooth and disable this option.

After completing the steps described above, the sound should appear again.

See if the receiver is blocked, which may occur due to covering it with a case or film. If the device is new, protective film made of plastic on both panels - front and rear - must be removed.
Carefully inspect the protective film, and if dirt is visible to the naked eye, you need to wipe the element with a small brush. But, it is important to remember that the brush must be completely dry to avoid moisture getting inside the device. As any iPhone user knows, moisture is one of the main enemies of the device, which can lead to serious damage to internal parts.
Turn on speaker during a call. If during this action the sound remains of poor quality or there is no sound, it means there are problems with the network or with signal reception. In such a situation, you can try to call another subscriber a little later or in a different place.

Click the icon at the top of the display. The sound playback between the receiver and speaker will be switched.
Click the appropriate button to record audio using the gadget's built-in receiver.

If after this you hear a clear, clear recording high quality, which means the problem lies in the network of the telecom operator or in the system voicemail. And if the misunderstanding is still not resolved, it would be correct to contact the device manufacturer directly. This can be done through the official website by writing to the support service.

If none of the methods given above - both from specialists and from Apple - helped, do not waste time. As soon as possible, contact one of the certified repair centers or the support service of the manufacturer of Apple gadgets.