• What to do if iPhone is disabled, connect to iTunes? Connecting iPhone to computer in various ways

    Apple cares about the security of user data, and in order to protect information at all iOS devices It is possible to set a password. Its entry can be configured each time the device is unlocked or after a certain time interval of its inactivity. Having set a password, iPhone owner, iPad or iPod may forget it. Taking this into account, Apple prompts users to try to enter the correct password 6 times. If none of the attempts are successful, the device will be blocked, and the user will see a message that he will be able to try entering the password again only after certain time. If you make a mistake 4 more times, the following message will appear: “iPhone is disconnected, connect to iTunes.”

    Restoring iPhone or iPad

    Apple recommends that if you receive the "iPhone (iPad) is disabled, connect to iTunes" error, you can restore your device. This can be done while saving data if previously using iTunes backups were created. In situations where this was not done, restore iPhone or iPad after incorrect entries passwords and errors will only result in data loss.

    To recover your iPhone after ten incorrect password entries, you need to do the following:


    After completing the device recovery procedure, the password will be reset, and you will be able to use your iPhone or iPad again.

    Remote password reset on iPhone and iPad

    Another effective way To get rid of the "iPhone is disabled, connect to iTunes" error is to run it remote reset. This can be done if the device was activated before the problem occurred. It allows you to track the device, as well as perform some remote manipulations with it, including erasing all information from the device.

    You can reset your iPhone password using the service from any computer, tablet, smartphone or other gadget with Internet access. To do this you need:


    All information from the device will be deleted and the “iPhone is disabled, connect to iTunes” error will disappear. You will be able to restore the device from existing copies or configure it as a new device.

    Additional passcode attempts on iPhone or iPad

    If the error “iPhone (iPad) is disabled, connect to iTunes” appears on the screen, you can bypass it and get 10 more attempts to enter the password. The method is as follows:


    If you can reset password entry attempts using the specified method, you can do this ad infinitum, repeating the steps described above over and over again and receiving 10 additional password entry attempts.

    First, you will need to install the program on your computer. Open a browser window installed on your operating system and go to the official Apple website. IN top panel On the page that appears, click iTunes and you will be taken to the program download page. Use the "Download" button to download the installer file. Select the directory to save it and wait for the download procedure to complete, and then double-click on the resulting file.

    The iTunes installer window will appear on the screen. Follow the instructions that appear on the screen to complete the installation of the program, after which you will be prompted to run the utility.

    You can launch the application on your computer using the corresponding shortcut on the desktop or the Start menu.

    Creating an Apple ID

    In the iTunes window you will see many options to manage your library contents Apple devices. To register an Apple ID, go to the “Store” section and select any free program, presented on the screen. You can use the following list of categories to search. After selecting the desired utility, click on the “Free” button or on the price label at which you can buy a paid application.

    You will be asked to enter your details account. Click on the "Create Apple ID" button to iTunes registration. Accept the agreement for using the service, and then fill out the required fields. You will be asked to provide your name, date of birth, as well as set a password for your account and enter your e-mail. It is important that the address email was entered correctly, as an email will be sent to it to activate your account. As soon as you see a notification that an activation message has been sent to specified address, go to your e-mail and follow the link provided in the letter from Apple.

    Installing the program

    Registration on iTunes is completed. Now you can click on the “Free” button in the program window again and enter the created login and password for your account. As soon as the data is entered correctly, the download and installation of the selected program will begin. After activation, you will also be able to purchase applications using a bank card.

    To install the downloaded utility on your device, you will need to connect it using the USB cable that came with your iPhone, iPad or iPod. Then go to the "Programs" section and click "Sync" to add already downloaded utilities. After completing the procedure, the gadget can be turned off.

    For itunes settings go to the “Edit” - “Settings” section of the program window.

    To make program management settings, add synchronization folders and enable automatic update data when connecting the device to a computer, you can use the “Settings” section. To access it, click on the button of your gadget and go to the appropriate section. To change these settings, you do not have to connect to your computer every time.

    What makes the products different? Apple from products of other well-known companies? First of all, this is quality, design, speed, number of applications and... iTunes. Every user of an iPhone, iPod or iPad must have it installed on home computer iTunes program. And why all? After all, without this media harvester it is impossible to transfer even a couple of songs to the iPhone. Therefore, today you will learn about how to connect your iPhone to your computer using iTunes.

    First of all, you need to connect your iPhone and computer using the USB cable included with your smartphone. If you connect your iPhone to your computer for the first time, the message “Connect to iTunes” will appear on the screen of your smartphone.

    If your computer does not have iTunes, then you need to go to the official Apple website and download the iTunes installer. The download link will be located at the end of the article.


    After clicking the “Download” button, the site will prompt you to save iTunes version, suitable for your operating system. After downloading, install the program on your computer following the system instructions.

    After installing iTunes, the program will open automatically. If this does not happen, simply open the iTunes shortcut on your desktop or Start menu.

    At the top of the program window on the right will be the name of your device (Iphone), by clicking on it you can open a menu in which you can work with the device: transfer to Iphone certain application list, all music or specific playlists, as well as photos, books, videos, contacts and calendars.


    To disconnect your device from your computer, click the miniature icon located next to the iPhone button. After this, the device can be disconnected from the computer.

    How to connect an iPhone to a computer via iTunes in order to be able to store backup copies on a PC, as well as transfer information to mobile device? How to connect your phone to your computer and initial setup programs.

    Preparing to connect

    To connect your smartphone to your computer, you only need to have USB cable. However, unlike Android devices, the iPhone is not detected as external storage with access to all data. This is due to the closed architecture of the system. To work with iPhone, you need iTunes, a multifunctional media player that serves as an Apple device explorer on your computer.

    You need to download iTunes on the official Apple website - there is a corresponding page with an installer download button. After downloading the installer, follow the wizard's instructions and restart your computer after installation is complete.

    The iPhone comes with a cable to connect to USB port. Take it and insert one end into the Lighting connector. Connect the other end of the cable to the USB port on your computer. You'll hear a new device detection sound and your iPhone will begin charging. When you connect for the first time, the question “Trust this computer?” will appear on the phone screen. Click "Trust" to continue working with the device.

    After trust is established, an autorun window will appear on the screen. You can open the device to view files, but you will only see photos and videos taken with the iPhone camera. To work with other data, make backups, restore and flash your iPhone, you need to connect it to iTunes.

    Connecting to iTunes

    After downloading and iTunes installations, as well as connecting your phone to your computer, you can begin setting up synchronization between the program and your mobile device.

    This will be the answer to the question of how to fully connect an iPhone to a computer via iTunes. There are two options:

    • Data transfer via USB connection.
    • Synchronization via Wi-Fi.

    With a USB connection, everything is clear: you connect the device to the computer, launch iTunes, and the program detects the smartphone. To synchronize via Wi-Fi, two conditions must be met:

    1. The PC and iPhone must be connected to the same wireless network.
    2. In the iTunes settings you need to set synchronization via Wi-Fi.

    If you have a router that distributes Wi-Fi, then there will be no difficulties in fulfilling the first condition. If there is no router, but the computer has wifi adapter, you can create on it wireless point, to which the iPhone will be connected. To fulfill the second condition, you must connect your iPhone for the first time using a USB cable. When the device is detected:

    1. Click on the phone icon in iTunes.
    2. In the "Overview" section, scroll down the page and check the "Sync over Wi-Fi" option.
    3. Click "Apply" to save the configuration.

    Once wireless syncing is enabled, you can remove the cable. At the same time, make sure that the devices are connected to the same Wi-Fi network. To check that there is a connection, after disconnecting the wire, open the “Synchronization” menu in the “General” section in the iPhone settings and click “Synchronize”. After this, settings, files and programs from the iPhone will become available in iTunes.

    Apple devices have a closed architecture - many operations require the use of a PC. That is why, when buying an iPhone, the user must be prepared for the fact that they will have to connect this gadget via a USB cable much more often than any of the Androids. The operation of connecting an iPhone via USB seems simple, however, there are some nuances that do not allow you to work with this device as a standard storage medium.

    A USB cable is included with any new or refurbished iPhone.– if there is no cable, this means one of two things: either they are trying to sell you a non-original smartphone (in other words, Chinese fake), or the cable was lost by sluggish salon consultants who used the gadget for their own needs.

    There are two types of USB cable for iPhone:

    The first one is Lightning. Connectors with 8 pins appeared on bundled USB cables and chargers along with the 5th modification of the iPhone. iPhones 7th modification also use Lightning to connect headphones. Distinctive feature Lighting is that the connector can be inserted into the connector from either side.

    Price Lightning cable in the official Apple store is 1.5 - 2 thousand rubles (depending on length).

    Second – 30-Pin. Cables with 30-pin connectors were included with iPhone 3 and 4 versions. Now it is better not to lose or break such cables: their cost is low, but finding such cables in stores and showrooms is extremely problematic.

    On the other side of the iPhone cable there can now be not only a classic USB connector, but also a connector that looks more like a micro-USB.

    This connector has several advantages: Firstly, it, like Lightning, is symmetrical, that is, it can be inserted into the connector on either side, secondly, it guarantees exorbitant data transfer speeds ( throughput– 10 Gb/sec). Cable Lightning-USB Type-C is also available in the official Apple store - at a price of 2.5 thousand rubles.

    How to connect an iPhone to a computer via USB and why do you need to do it?

    Connecting an Apple gadget to a PC via USB allows you to:

    • Synchronize iPhone with the program iTunes: load music and other multimedia data into the device’s memory, transfer notes and contacts, transfer credentials.
    • Create backup copies of the information stored in the device’s memory and restore data from backup copies.
    • Restore and update the operating system.
    • Free up device memory (which is worth its weight in gold) by transferring data to hard drive computer.

    All this will be impossible to do if the connection between the iPhone and PC via USB is unstable. Right Connecting iPhone to computer is quite simple:

    Step 1. Take the USB cable and insert the connector 30-Pin or Lightning into the corresponding connector on the gadget.


    Step 2. Insert the connector on the other side into any of the USB connectors of your computer or laptop.

    Step 3. Wait for the sound characteristic of connecting the device via USB. At the same time, the iPhone will vibrate to notify the owner that it is charging.

    Step 4. The message “ Trust this computer?" Confirm by clicking the appropriate button.

    Step 5. An Autorun window pops up on the computer monitor - this already indicates a successful connection via USB.

    Close this window.

    Step 6. Go to " My computer» - you will see in the list portable devices your iPhone.

    Step 7. Click on the icon and you will have access to photos and videos that were taken with your iPhone camera. You won’t be able to get to the music this way - you’ll have to install and run a program called iTunes.

    Why iPhone does not connect to the computer: possible problems

    The solution to the problem of connecting an iPhone via USB very often lies on the surface. This is a typical situation: the user connected the smartphone via a cable, waited for the iPhone to notify by vibration that it was charging - but nothing else happens! According to the instructions given, we see that the next step is for the user to confirm trust in the computer. “Trust request” does not appear on the screen of a locked iPhone. Simply unlock the device - a message will appear and the problem will be solved.

    Other errors are possible:

    • If you encounter errors accompanied by the messages SyncServer And MobileDeviceHelper, check if the time is set to the same on the PC and the gadget. Even a slight time difference can result in connection failure.
    • If there is an error " USB device not identified» Plug the cable into another USB port on your computer.
    • The error may also be due to the fact that the SIM card in the iPhone does not meet the requirements of the device. For the connection to occur correctly, just activate “ Airplane mode" through " Settings».
    • If the computer is just doesn't see iPhone, the problem lies in the cable or in the connector on the gadget itself. In any of these two cases, the user will have to spend a lot of money - on buying a new “cord” or on diagnosing the device with subsequent repairs.

    Connecting via USB: pros and cons

    Connecting with a USB cable is not the only way to connect an iPhone to iTunes and a PC in general. iPhone with iOS version older than 5.0 can be connected to a computer via Wi-Fi. However, most owners Apple technology continues to use cables “the old fashioned way” and here’s why:

    • Connection via cable guarantees high speed data transfer (for USB 3.0 – 4.8 Gbit/s). When connecting via Wi-Fi, you also have to look at the restrictions set by your Internet provider.
    • The device connected by cable to the PC is recharged, whereas when connected via Wi-Fi energy, on the contrary, is consumed at an impressive rate.
    • Connection via USB is very simple procedure, but not everyone can organize an over-the-air connection.
    • Only when connecting via cable can you recover data from backup copy and produce full reset settings.

    Using USB ports to connect an iPhone also has disadvantages:

    • The device is actually tied to the PC with a “cord”. This limits the user's capabilities - in order to talk on the phone, he will have to interrupt the “connection”.
    • The gadget takes up one of the USB ports - this can be a problem if your laptop or laptop only has 2 ports.

    Conclusion

    Connecting an iPhone to a PC via USB is no more difficult than an Android: in any case, difficulties are possible, but their occurrence is more an exception to the rule than the rule. Another thing is that connecting an iPhone via USB alone will not give the user a wide range of opportunities - he will only be able to copy and delete photo and video files taken with the gadget’s camera, and for other operations he will have to master iTunes. Working with Android in this regard is much simpler: when connected to a computer via USB smartphone with "green robot" is defined as a flash drive.

    Read more: