What does tone dialing mean? What does it mean to put your phone into tone mode?
Many companies, be it an operator cellular communication or big internet store, today they offer to use a convenient menu when making a call by pressing the dial keys. For example, do you want to buy a product? Press one. Should you consult a specialist? Press two. Etc. When making a call, you can usually hear that the phone needs to be switched to tone or tone (these are the same thing) mode. How to do this?
Dual-Tone Multi-Frequency, DTMF or tone dialing - a two-tone, multi-frequency analog signal used for dialing telephone number. Many PBXs can receive a telephone number in tone form, but only if the PBX is replaced with a digital one. Other PBXs are capable of receiving a telephone number only in pulse mode. Pulse mode is a method of dialing a telephone number, in which the digits of the dialed number are transmitted to the telephone exchange by sequentially closing and opening the telephone line, and the number of pulses corresponds to the transmitted number, with the number 0 being transmitted in ten pulses.
As for our main question, everything is very, very simple. Let's say when you call you are told to put your phone in tone mode by clicking the star. If you're calling from your smartphone, don't press anything because it defaults to tone mode. This applies to any smartphone, including iPhone:
Or, say, Xiaomi:
And even if you click on the same star, nothing will happen.
As for landline phones, the situation is different. To go to tone mode from pulse it is usually recommended to click on the asterisk (*) icon. Pay attention to the image of the Panasonic phone, where the inscription Tone is clearly visible under the asterisk, which indicates that you need to press this particular button.
Some phone models have separate buttons, for example, T or P. And some modern landline phones do not support tone mode at all. To be fair, we note that such models are rare.
Instructions
Press the “*” button on your telephone - this is the easiest way to switch the device to tone mode, provided that your phone is in this way.
Find the “P” and “T” buttons on yours; they can be on the side of the device or on the bottom. If there are such buttons, it means that the phone is switched to tone mode with their help. Press the "T" button to go to desired mode.
If both methods do not work for you, please refer to the instructions included with the device. Some models of devices are switched to tone mode using completely different keys.
Video on the topic
Please note
If you are not sure of the correct combination to dial to switch the phone to tone mode, use the instructions, otherwise, by careless actions you can enable completely different functions or render the telephone unusable.
Useful advice
Perhaps your phone initially works in tone mode, and you should not waste time searching for combinations, just listen to the sounds the phone makes when dialing a number.
Sources:
- how to switch your phone from touch tone mode
Even if your telephone exchange only works in pulse mode, autoinformers installed in some organizations accept only tone commands. To interact with them, you have to switch the telephone to the appropriate mode.
Instructions
If you called the automatic informant number using a mobile phone, then it already works in tone mode. If it turns out that the autoinformer does not respond to commands, find in the device menu an item corresponding to the DTMF signal transmission mode (it is called differently in different phones). Allow the transmission of such signals.
Find out if your telephone exchange supports touch tone mode. If it turns out that the PBX has been upgraded and is now capable of being controlled in this way, switch to tone mode and home phone, and dialing numbers will speed up significantly. To do this, find a switch on its bottom or one of the side walls, labeled P-T or Pulse-Tone. Switch it to T or Tone mode. Then check whether the PBX responds to tone commands, and if not, switch the phone back to pulse mode.
In some wired devices (mostly equipped with radio tubes), switching to tone mode is carried out not by a mechanical switch, but through the menu. Find the location of the corresponding menu item in the instructions or yourself.
If the PBX does not support tone mode, it is inconvenient to use a switch or menu every time you need to use an automatic informant. Leaving the device switched to pulse mode, after dialing the number, press the asterisk key. The device will switch to tone mode and will remain in it until you hang up.
Disc and early push-button phones do not support tone mode at all. After calling from such a device to the answering machine, wait for the secretary’s response, and then ask him to manually connect you to the desired subscriber. If communication with the secretary is not provided, use a special autonomous device - a beeper. Bring it to the microphone and press the buttons with the desired numbers.
In ordinary city telephones, there are two types of dialing: the so-called pulse, known since the days of rotary telephones, and tone. Currently, it is generally accepted that pulse dialing (when the number of pulses and interruptions corresponds to a particular dialed digit of a number) is a relic of the past. Nowadays, tone dialing is increasingly used (in which a number is dialed using special tone parcels). However, quite often telephone exchanges do not support tone dialing.
Instructions
Some phone models do not natively support tone dialing. For example, disk telephone sets created only for pulse dialing. If you have a similar device, you can safely use its functions.
There are cases when a subscriber calls various services or hotline and hears an answering machine suggestion that advises you to switch your phone to tone mode. But not all users are aware of how to complete this process. The article will give useful information for those people who do not know how to switch the phone to tone mode.
Dialing modes
The main modes of telephone dialing are divided into pulse and tone. These systems are the fruit of the development of communication. An earlier form of telephone operation is the pulse mode. Dialing a number with it is carried out by interrupting the line with a certain list of sounds. Any subscriber will probably remember his calls from regular phone to another city via intercity line. Tone mode is a more recent invention and appeared relatively recently. Its main difference from pulse is that each digit has a pre-selected sound. It should be noted that all modern models telephone sets are produced taking into account the use of this feature. The pulse mode for such models is a thing of the past. But despite this innovative approach, phones with classic capabilities are still popular to this day. Therefore, if you need to switch to tone mode, you should clarify whether the menu of your device allows it.
Examination
To find out whether the required function is enabled, pick up the phone and press any key. You must determine what kind of sounds are coming from your device. In case you hear short beeps, this indicates that your phone is switched to the tone system. 
If you can recognize sounds similar to clicks, then the device undoubtedly operates in pulse mode. The latter option limits a number of functions. We will discuss further how to switch the phone to the tone mode we need.
Process
Press the “*” button on your device - this is the easiest way to switch your device to tone mode. This method is only effective if the menu provides a similar function. Not every phone model involves simply pressing a button. Hold and do not release the “*” or “#” key for several seconds. The word "tone" or "t" should appear on your phone's display. If the display shows absolutely nothing, then you should again listen to the sounds made by the handset while pressing the buttons. Some models are equipped special keys“T” or “P”, which are located on the body. They were created to convert a radiotelephone from pulse mode to tone mode. 
There are other custom steps for this customization. They are typical for some models. The switching method can be a combination of buttons “*” and “-” or “-”, “*”, “-”.
Nothing fit
If none of the methods suggested above for switching to the telephone's tone mode work, then it is recommended that you turn to a detailed study of the menu of your device. Many models can be translated using it. Enter settings and refer to the option “Switch between modes”. Select the method of operation you need and confirm your action.
We have dealt with the concept of tone mode, but finally we should talk a little more about pulse mode. First of all, telephones with a rotary dialer work this way. Pulse mode is a dialing method in which digits are transmitted to the station by step-by-step closing and then opening the selected telephone line.
What is dial tone on a landline phone?
Landline (wired, home) telephones for their intended purpose are now used less and less, giving way to radio-based mobile devices. Since the latter, in most tariffs, there is no need to pay a monthly subscription fee, the cost of their use is even lower than that of their stationary counterparts. At first glance, it may seem that no problems can arise when using wired phones, since the technology is old and well-studied. But this is true for the developer, not for simple user such a phone.
For example, sometimes companies and banking institutions indicate a toll-free telephone number in their contact information, by calling which many issues can be resolved. Usually, an answering machine on the other side of the line picks up the phone, asking the subscriber to press certain numbers (turn the dial) during the conversation. Unfortunately, for many, the call ends here, since the answering machine does not react in any way to actions on the phone, ignoring button presses. Why?
The reason is simple - there is a pulse and tone mode of the phone. Surely, everyone has heard strange clicks or beeps that accompany pressing numbers or dialing a number using a dial. Beeps are tone mode, and clicks are pulse mode. Let's look at how dialing occurs in old rotary phones.
When the disk is rotated to the desired distance and automatically returns to starting position special electrical contacts are closed: each closure forms a click-pulse; by counting their number, you can determine the digit being dialed and, accordingly, the number. This “counting” is carried out by the equipment at the station (ATS). Simple and effective. In newer phone models, the contacts are replaced with a special pulse generator, which, by the way, can also be switched to tone mode.
Subsequently, pulse dialing was replaced by a more technologically advanced tonal (tone) dialing. In it, dialing is carried out not by digits, but by modulation AC With the required frequency. Each number (button) has its own signal tone. Then everything is the same: the PBX perceives a combination of tones and converts them into a dialed telephone number. The tone mode is more noise-resistant (errors in dialing now depend entirely on the attentiveness of the owner, and not on the state of the network), and also allows you to connect with the subscriber more quickly. All modern phones tone, pulse mode may be completely absent in them.
By the way, it is believed that the tone mode provides more high quality sound. This is only half true. To work in tone mode, both the telephone and the PBX must support it. Trying to use a new phone on a pulse PBX will not give any advantages (if, at all, the device works). Stations designed for tone mode are digital (or mixed), as opposed to analog pulse. Hence the improvement in sound.
A programmable pulse generator allows you to switch the phone to tone mode and operate both pulse and tone communication networks. Let's assume that the subscriber is served by an analogue telephone exchange. To put your phone into pulse dialing mode, you usually need to press and hold the “*” (asterisk) button for a few seconds. If this does not help, then turn the device over and examine the bottom cover - often there is a small toggle switch for selecting a mode. Switching to tone dialing is performed in the same way.
Now let's return to the example given at the beginning of the article. Owners of rotary telephones connected to analog stations may forget about communicating with an answering machine that requires pressing any buttons, since without additional equipment this is impossible. Of course, there is a way out - this is a special set-top box that generates tone signals into the network, but you will have to forget about convenience.
Do you know how to put your phone into tone mode?
Many of us at least sometimes have to call multi-line phones to various hotlines. It’s easier to do this from a mobile phone, but sometimes more expensive, because the operator begins to read money from the beginning of the connection. First, you listen to an answering machine message that asks you to choose which specialist to connect with, and then in some cases you will have to spend more than one minute on the line waiting for the operator to respond. In this case, it is more profitable to use a stationary device, but in this case you need to decide how to switch the phone to tone mode.
Phone operating modes
There are two options for telephone operation - pulse and tone. A conversation on a multi-channel number is possible if you enable tone mode. Older phones and PBXs support pulse dialing by default. Modern digital PBXs and more advanced telephone models are tone-on-tone. You can determine how your phone is configured by default by holding the handset to your ear and listening to the sounds it makes as you dial a number:
- On a phone set to pulse mode by default, you will hear characteristic clicks, the number of which corresponds to the dialed digit.
- In tone mode, a characteristic sound signal will be heard in the speaker.
If you heard the sounds described in the first case, in order to call the hotline you need to find out how to switch the phone to tone mode. However, it is worth noting that owners of rotary phones will not be able to do this without purchasing additional equipment.
How to find instructions for your telephone
First of all, when we need to study new feature any item, we refer to the instructions. It comes complete with any equipment. In it you can find a lot of very useful tips, including how to switch the phone to tone mode. If the user manual is lost along with the box or was not there initially, you should use the tips offered later in our article.
The easiest way to put your phone into tone mode
Sometimes, for objective reasons, it is impossible to find the user manual, or it may only contain technical description models, and the functions are disclosed very poorly. In this case, use a simple and proven method of switching to tone mode.
Once you have dialed the number and are connected to the answering machine, press and hold the star (*) for a couple of seconds. Usually this is enough to immediately switch to the required mode. If the transition does not work, then you should try again. If the transition procedure is successful, you can enter any extension numbers. However, you will need to go through this procedure every time you call.
Panasonic phone tone mode and its features
Panasonic specialists thought about introducing tone mode in their devices before other companies. It is no secret that its spread everywhere remains only a matter of time, everything more PBXs use digital technologies, and organizations create multi-channel numbers for convenience. Before you translate Panasonic phone into tone mode, examine the device carefully. On some models you may see a "tone" key or a "pulse-tone" switch. The switch must be set to “tone” mode, and the key just needs to be pressed.
Modern radiotelephones of this brand are programmed by default for tone dialing mode, and additional settings Most often you do not need to enter it. If the program is broken, then using the instructions it is easy to fix it.
What does it mean to put the phone in tone mode?
Previously, on landline phones, and even now there are 2 dialing modes: pulse and tone
first the pulse mode appeared, this is 1 click number 1 2 clicks number 2 etc etc...
then later the tone dialing mode appeared; it is faster than the pulse dialing mode; in the tone mode it is much faster to dial numbers and various services telephone operator supported only in tone dialing, not supported in pulse dialing
If you have a landline telephone, there are usually 2 dialing modes: tone and pulse
Many old telephone exchanges and telephone networks do not support tone mode, only pulse mode. Even 10 years ago, settlement and village telephone exchanges did not support it.
those. this is already becoming a thing of the past, converting from pulse dialing to tone
for example, if a subscriber has an PBX connected to the station in pulse dialing mode, then in tone dialing he will not be able to dial the number and vice versa
Sad Roger
Regular dialing is pulse dialing. It has remained since the days of disk machines, when each digit corresponded to its own number of pulses.
IN modern devices The disks are no longer there, but they remain compatible with older networks, that is, by default they also send impulses when dialing, rather than tones. To switch to tone mode (to, for example, select menu options for various services, call using cards, etc.), you need to either move special switch, if available, or type an asterisk *.
In the west, there is no longer pulse dialing; there, numbers are dialed immediately in tone mode. When each digit corresponds to a signal from two specific frequencies.
Mikhail Belodedov
Pulse dialing of a telephone number is the first thing that came to replace “young ladies on the switchboard” in telecommunications. The dialer disk, rotating (reverse), briefly breaks several times telephone line. One gap - number 1, two - number 2, etc. Easy and simple. A minimum of complex technology. Accordingly, automatic telephone exchanges are needed that decipher these short-term interruptions and establish the necessary connection. These PBXs have become very widespread - these are decade-step PBXs. The main disadvantage of pulse dialing is its significant duration.
With the development of electronics, tone (or tonal) dialing entered the arena. No line breaks. A special signal is transmitted over the line, which the telephone exchange interprets as a digit of a telephone number. A pair of non-multiple frequencies is used as a signal - hence the name Dual Tone Multi-Frequensy (DTMF). There are 8 such frequencies in total - two sets of 4. They are the ones heard in the handset when dialing a number. Modern PBXs use tone dialing as the main mode - because it is much faster. However, the opportunity to use the old, pulse dialing is almost always left so that you can use old telephone sets. On modern devices, as a rule, both dialing modes are provided and a special switch is made - either physical or software.
Matvey628
Until recently, absolutely all telephone sets were analog, that is, dialing was done by sequential dialing of numbers using a rotating dial. However, with the advent of the first digital switches and telephones, dialing in the form analog signals lost all meaning.
However, the huge number of analog telephones did not allow a quick transition to the new format. Therefore, most digital telephones had a function for switching from one mode to another. Tone mode was intended specifically for digital devices and switches and was distinguished in that the digits of the number differed not in the number of clicks when dialing, but in the pitch of the tone, individual for each digit. This is exactly what is meant when it is said that you need a telephone switch to tone mode.
Tone mode is usually needed to connect to an internal number without operator assistance. Most often, to change the tone mode, you need to press “*”, after which you can enter the subscriber’s internal number.
How to put your phone into tone mode?
Captain's obviousness
If the phone is equipped with two dialing systems - tone and pulse, and at the same time operates in pulse mode by default, there are two options for switching modes. One of them is mechanical, with a microswitch on the phone body marked T and I.
The second option is simpler - just press the button with the asterisk sign while the handset is off-hook.
There are also phone models in which dialing modes are switched through the phone menu - here you will have to read the instructions for this phone model.
Matvey628
The question, for many young people, does not make sense at all, since they have only dealt with mobile phones in which this mode is installed by default.
As for older people, they still remember analog phones that had a rotating dial for dialing. Appeared later digital phones had two dialing modes: traditional and tonal. During tone dialing, sounds of different pitches are heard, each of which corresponds to one digit. To put your landline phone into tone mode you need to either press the asterisk * or set the tone switch to "tone" mode. The mode switch is usually located on the back of the telephone, where the wire connects.
Zolotynka
Most corded telephones, as well as many older models, actually switch to tone mode using a slider, which is usually located on the bottom of the telephone or on its back wall. This function marked Tone / T and Pulse / P. Move the slider to the T position and the phone will work in tone mode.
Not everything is so simple with new phone models. Required function may be “hidden” somewhere in the phone menu and in order to use it and switch the phone to tone mode, you should carefully study the instructions. For different models the setup may vary significantly.
Pistolet
By default, the tone mode is already installed on the phone. It all depends on the phone’s firmware; there are a lot of touch-tone and simple ones. During the conversation - this is when the connection has already started, press * (asterisk) and just wait for the mode to change. This action is suitable for almost all telephones.
Dolfanika
Some early models of mobile phones still offer the option to switch the phone to tone mode. Other mobile devices are already set to tone mode.
if you need to change the mode yourself, then press the asterisk and hold it.
D e m k a
You can switch on the phone body using special buttons, but usually just holding down the asterisk is enough. But I always had to do this through the phone settings, in the “sounds” tab - everything is simple and clear there, just check/uncheck or select the desired mode and that’s it. Therefore, there is nothing complicated about it, the main thing is to choose the most suitable and convenient method for yourself.
Hunter nickname
The phone has two modes - tone and pulse. In pulse mode, when you press the buttons, clicks will be heard. If tone mode is selected on your phone, you will hear short sounds when pressed. sound signals. Most phones have an easy way to change from one mode to another. You just need to unlock the phone and hold the star until the mode changes.
First you need to determine in what mode the phone operates, tone or pulse.
If you hear clicks after pressing the button, then the mode is pulsed, if you hear short signals– that is the tone mode.
Press the button on your phone * " (asterisk) - this method of switching to tone mode is suitable for most devices.
Afanasy44
At work, to put the phone into tone mode, just press the * button, below it and the inscription is in English tone.
And on a home telephone, there is a key on the back of the device to switch to tone mode.
Chipmunk
I have to make a lot of calls during the day. And very often, to reach operators through the answering machine menu. you have to put the phone into tone mode. To do this, I usually click on the button with an asterisk - *
To put your home phone into tone mode When the handset is off-hook, you need to press the star. In some phone models you need to translate through the menu. There is no need to switch your mobile phone - it is already in tone mode.
How to put your phone into tone mode. Phikips phone number. I pressed "*" and nothing comes out.
Pavel Ronzhin
Instructions
1
Determine what mode your device operates in, tone or pulse. To do this, listen to the sounds your phone makes when dialing a number. If you hear clicks after pressing a number, it means the mode is pulsed, and if there are short tones, then it’s a tone mode.
2
Having determined the operating mode of the device, switch the phone from pulse mode to tone mode using one of the three methods described below.
3
Press the “*” button on your telephone - this is the easiest way to switch the device to tone mode, provided that your phone is switched in this way.
4
Find the “P” and “T” buttons on your phone; they can be on the side of the device or at the bottom. If there are such buttons, it means that the phone is switched to tone mode with their help. Press the "T" button to switch to the desired mode.
5
If both methods do not work for your phone, please refer to the instructions included with the device. Some models of devices are switched to tone mode using completely different keys.
There are only two modes for dialing a telephone number - pulse and tone. At all landlines In Russia, pulse mode is used by default. Tone may be required if you need to select a response using a number, for example, when calling a call center. Then the automatic voice will ask you to first put the phone into tone mode.
You will need
- instructions for the telephone set
Instructions
If you have landed on this page, then you probably need to get an answer to the question, how to install tone dialing on a mobile phone? First let's figure out what this function is "tone dialing" and why it is needed. Any cell phone user sooner or later has a situation when it is necessary:
obtain information on a specific operation from the service provider (operator);
call the bank's hotline;
order a ringtone for a call.
In these and many other cases, tone dialing is required. Mobile devices for cellular communications are equipped with two modes - tonal and pulse. Pulse dialing is already outdated and practically not used. Its essence lies in the number of presses on the button: one press - number 1, two presses - number 2, and so on.
On modern mobile phones tone mode is installed by default, and pulse mode is not available at all, since it is slower and more inconvenient than tone mode.
How to enable touch tone on your phone
It has already been said above that modern devices tone mode is set by default, but in phones with touch display The keyboard does not always light up. In addition, the operator may ask the interlocutor to switch the phone to the desired mode, which means that the setting was not saved in the phone.
Therefore, the user needs to know how to display the keyboard on the mobile phone screen. When you press the call button and hear a dial tone on the handset, press the soft key, which will turn on on-screen keyboard. After that, press * or +, that’s it – the DTMF mode is active.
To the owner touch phone It is worth paying attention to the options available during the call. Sometimes the transition to tone mode is carried out through them. During a conversation or listening to information, press the number entry item and enter the desired combination of buttons.
This combination must be indicated in the instructions for the device. If these recommendations do not help put the device into tone mode, it means that it is infected with a virus or there are problems with the firmware. In this case, the owner needs to contact the service center.