The phone is loading and does not turn on. What to do if your Android smartphone does not load completely

Android phone hangs on the logo when turned on and does not load further. What to do?

1. Thank you very much helped))
2. Ask him again)
3. Delete Play Market and stop downloading
4. The firmware is damaged. If there were no root rights, then you can try to restore it through recovery.
5. The phone needs to be re-flashed - w3bsit3-dns.com help
6. Hi all. I faced the same problem myself. But I was able to solve it very easily. I pressed the volume up button and turned on for 30-50 seconds. The phone turned off and then turned on normally.
7. Do a general reset of the phone (with loss of all data in memory):
   Option1
   Turn off your phone.
   
   As soon as the recovery menu appears, you can release the buttons.
   
   
   
   Option2
   Turn off your phone. With the battery completely removed and inserted back.
   Press and hold the Volume Up + Volume Down + Power buttons.
   In the menu that appears, press Volume Up.
   In the menu that appears, select Wipe data/factory reset(move through the menu with the volume keys, confirm the selection with the Options button ( touch button with four squares))
   In the new menu, go down to Yes -- delete all user data and confirm your choice
   After that, select Reboot System.
8. only flashing
9. reflash
10. It hangs on loading and after 2 minutes it reboots and does the same again. I reflashed it via flash tool. The flash drive showed everything ok but the problem remained the same
11. Try http://your-mobila.ru/kak-sdelat-hard-reset-na-android.html
12. guys, help me, I really need it, I have a problem with my tablet, when I turn on the tablet it freezes on the Android screensaver and does nothing, I even reset all the data and it doesn’t help!!!
13. I had a situation where my phone just ran out of charge and just needed to be charged.
14. Well, yes
15. Yes, of course, I did everything as written, reset it and all that, I turn on my mobile phone and still the screensaver still hangs, so what should I do now?..
16. I do everything exactly as described in all the tips from different sites, but the phone stops at the splash screen: SAMSUNG GALAXY S7 Android. I wanted to flash it again, but Odin does not see the phone, although the drivers are installed and it appears in the device manager when connected in Bootloader mode Android Bootloader Interface. Inclusion in others USB ports gives the same result. I tried to install the firmware from the SD card, it says, downloads the zip package and then Abort. When loading into Factory Mode all tests are running. What else can you do? As I understand it, it’s an insurmountable trifle of not being able to bypass bootloader errors, which even corrupted the firmware itself. Resetting the entire system to factory settings does not help. It's a shame that even though the phone's hardware is fully functional, the system simply won't boot ( Samsung Galaxy S7 SM-G930FD, Android 6/01). The Kies utility does not help, since it “does not see the phone.” What else can you do?

Sometimes smartphones fail; there can be many reasons, from an error in the phone’s firmware to a virus. You can use several methods to turn on the phone, but if none of them help, then it is best to take the phone to a service center.

If your Android phone won't turn on, you can try to turn it on.

Method No. 1. Reset factory settings on Android. Do not forget that this method will lead to the loss of all data that was saved on your smartphone. However, if the phone can be “revitalized”, then it will not be difficult to recover the data. To reset the factory settings, when the phone is turned off, you need to simultaneously press several buttons, the power button and the volume button. This will reset all settings so the phone turns on.

Method number 2. Reset factory settings. The first method of resetting factory settings is suitable for those whose Android phone does not respond at all to pressing any keys. The second method is for those devices that freeze at the loading stage. In this case, you can also reset the factory settings, to do this you need to dial code #3d5*361d4fb8#, this will result in the loss of all data, but the phone will turn on.

Method No. 3. Reflashing the device. If you do not know how to do this yourself, it is best to use the services of specialists from the service center. For those who can do the flashing themselves, you need to check whether the smartphone can switch to the “emergency mode” mode; to do this, you need to simultaneously press the “Return”, “Volume” and “Power” buttons. When carrying out this procedure, it is strictly forbidden to remove the battery from the device. If the smartphone goes into the specified mode, it means that it is possible to flash it.

Virus. When using a device to access the Internet, there is a risk of receiving malware, which not only delete files on their own, but can also block the operation of the device. Therefore, if all of the above methods do not help you, it means that you have received a virus that has deleted all the files that are necessary for the operation of your Android smartphone. In this case, it is best to contact specialists.
When buying some smartphone models, you need to carefully monitor the updates that it offers, sometimes this is useful. There have been cases when an Android smartphone may stop working due to an unupdated firmware version, this is a warranty case, so you need to contact service center. Now, you know almost all the reasons why an Android smartphone does not work.

What to do if your Android tablet does not turn on?

If your Android tablet does not turn on, there may be two reasons: either hardware, that is, problems with some spare part, or “software”, that is, an incorrectly installed operating system or installed incompetent programs.

Problems with the internal parts of the tablet may occur if you drop it or hit it. In this case, it will simply be impossible to repair it yourself. After all, the impact could damage the battery, some cable or board. In this case, it is best to take the faulty tablet to a service center. If you still decide to repair it yourself, then you can find diagrams of the boards and cable locations in order to check that they are connected correctly.

In the case of a software problem, it will be much easier to revive the tablet. To do this, you can resort to a hard reset. For all models, this procedure looks noticeably the same, but it is best to find instructions specifically for your tablet model. Standard procedure a hard cut looks like this. First of all, you need to turn off the tablet if it freezes at the loading stage. To avoid data loss, it is better to first remove the memory card and SIM card. Then you should hold down the button to turn on the tablet and change the volume level. In some tablet models you need to hold down the volume up button, and in others you need to press down the volume button. (This is why it is better to find instructions for specific model tablet). It takes approximately 10-15 seconds to press the buttons, this time also varies for different models. After this, the tablet should “respond” to you with vibration. In the menu that appears, select Settings, and then Format System. After this, the tablet must be rebooted.

Most often, this procedure does not help after the first time, so do not despair and repeat the procedure. If this method fails to restore the tablet’s functionality, then you can resort to flashing the firmware. It is best to entrust this to specialists who will not only repair the tablet, but also eliminate the cause of its breakdown.

Sometimes the reason the tablet freezes at the loading stage lies in large quantities downloaded applications that are not always good quality, so resetting the settings to factory settings helps 100 percent. In other cases, of course, it will be more difficult to repair it. In order not to risk permanently damaging the device, it is best to contact specialists, especially if the device is still in storage. warranty service, it is best not to take any action so as not to void the warranty.

IN modern world It’s impossible to imagine a person’s life without a phone. This little helper Every person has it. It makes it easy to contact the desired subscriber. But imagine that your Android phone does not turn on. What to do in this case? Of course, without a smartphone it will be quite difficult. If you do not have a spare gadget, then you need to quickly repair your device. In this article we will look at why your Android phone won't turn on.

Mobile check

If the phone stops turning on, then you should not immediately disassemble it and see what could have happened there. Of course, if you do not have certain knowledge, all these actions can be detrimental to your smartphone. Subsequently, repairs can only become more difficult and expensive. Why won't my Android phone turn on? What to do in this case?

Before you take drastic action, you need to check - maybe it’s not broken at all. First you should find out if the battery is charged, or maybe the reason is software glitch apparatus.

Checking the mobile device battery

As we have already found out, the phone may not turn on due to low battery charge. We put the smartphone on charge and wait about 30 minutes. After that we try to turn it on. If you managed to “revive” the phone, then the problem is high consumption charge. How can this be fixed? It is enough to turn off Bluetooth and Wi-Fi after use. These elements are constantly being searched possible network to inform the user about it. If you turn these elements off, you will be able to long term save charge. You should also reduce the brightness on your smartphone, as bright screen consumes a lot of energy.

If you have a function on your mobile phone that allows you to change the brightness automatically based on the room illumination, then you should turn it on. Let's return to the problem. If you managed to turn on the phone while it is charging, then let it stand like that for about 4 hours. It is worth checking the expiration date of the battery - perhaps it is time to change this component. If the phone does not turn on, but Android is charging, you need to consider other possible situations.

Smartphone power button

The phone may blink but not turn on. This may be due to a faulty power button. The reasons why it may not work can be different:

• If you have just purchased mobile phone, and it does not turn on, the power button may be faulty, and the reason lies in a manufacturing defect. What to do in this case? You need to contact the store where you purchased the smartphone and ask for a refund, to replace the phone or to have it repaired. The seller is obliged to do something in this case.

• Another reason is also possible, which is already associated with your carelessness. If you spill liquid on your mobile device or drop it, there may be various reasons why your phone will not turn on. In this case, you should not disassemble the device yourself. Of course, if you have a warranty, you can try contacting a service center. Otherwise, you will also have to resort to the help of a professional. Unfortunately, even he is not able to fix any phone.

Memory card

So, your Android phone won't turn on. What to do? The reason may lie in the SD card. Your phone may not support a certain memory card, causing your mobile device to freeze or not turn on at all. You should choose a memory card in specialized stores, having previously found out that it will fit your smartphone. If different memory cards cause the same effect, then the problem is with the phone. In this case, you need to reflash your mobile device. You can do this yourself, but you should be careful, as you can only cause harm.

Phone won't turn on after Android update

Sometimes situations happen with smartphones when it does not turn on after an update. As a rule, new gadgets are more prone to this. Various updates come to your mobile device, which, unfortunately, are not safe. Usually smartphones that have constant access to the Internet are susceptible to this. After such updates, the phone may randomly turn off and turn on after a while.

Another situation is also possible: you try to turn on your phone, and it lights up inscription Android and nothing else happens. Reboots return the phone to this problem again. So, your Android phone won’t turn on again. What to do? In this case, you should try turning off the device and removing the battery for a few minutes, then turning it on and resetting the settings. If the problem was not serious, then everything will work out, and after a while the phone will return to its previous state.

If it refuses to work adequately, then you should use a hardware reset. This will clear your phone of updates and all information. But, most likely, it will return to working condition. Of course, all your personal information will disappear, but getting your phone back to its former life will probably be more important. This reset will be carried out differently for each smartphone. You need to find a suitable method for your model. Your phone won't turn on after a factory reset? Unfortunately, this solution may not be suitable for Android. In this case, you will need to reflash your device.

After flashing the phone does not turn on (Android)

If you unsuccessfully reflash your device, it may not turn on or freeze at the Android logo. What to do in this case? Of course, you will have to reflash it again.

First we go to the manufacturer’s website and look for necessary firmware, which will fit your model. You should not search for firmware through a search engine, as it will return many various programs, which most likely won't work. This way you can only aggravate the problem and bring your smartphone to a “brick” state.

After the firmware the phone does not turn on. It is still possible to bring Android back to life. You will need to install correctly new firmware. If you do not know how to do this, then you need to contact the service center. This way you can be sure that everything will be fine with the phone.

Mechanical damage

The most common cause of smartphone failure is mechanical damage. If the phone has been dropped or you have spilled liquid on it, then this is a serious problem that cannot be dealt with so easily.

If the fall was not serious, then you can try to remove the battery, SIM card, SD card. After some time, we return everything to its place. If the phone works, then you are lucky, and its contacts simply went missing. Otherwise the problem is more serious. If you don't have necessary knowledge, then you should not try to disassemble and repair the mobile device yourself. In this case, contact the service center.

A huge advantage of using Android smartphones or tablets is that we can download many applications. Just by running Google Play, we get instant access to various applications.

Of course, some applications cost money, but most of them are free. We can download new apps daily! But how often does the application work as expected? Unfortunately no.

Often your favorite applications freeze or crash. Every Android user I've encountered this problem at least once. The problem may occur on different devices Android including LG G3, LG G4, Samsung S6 and S6 Edge, Nexus 5, Nexus 6, HTC 7, HTC 8, HTC 9 and many more.

If you also encounter that your phone freezes when turning it on, off, or when running any application, then we advise you to use the solutions that we will describe in this article.

What to do if a phone with a non-removable battery freezes, Samsung, Lenovo, LG, Meizu, Xiaomi, Sony, ZTE, Android?

As you can see, various reasons can be the reason for applications to freeze or crash. Therefore, below we will describe solutions to problems that cause the phone to freeze.

The first thing you need to do is reboot your device. All applications and processes running in background, will be closed after you restart your device.

This way you will free up memory that was occupied by work background applications and processes. Your device will run more smoothly and without freezing. If you notice that your phone freezes after rebooting, move on to other solutions.

To restart your device, press and hold the Power button. When the menu appears, press "Restart" or "Turn off power".

Why do apps freeze or crash?

There are several reasons why apps crash or freeze. The application may crash if it is not updated. Many applications work much better if you have excellent connection to the Internet.

Another reason is that the application does not have enough space to run correctly. If your Android doesn't have at least 1 GB of memory, then don't rely on it. correct operation applications and games. Be sure to periodically clear cache and app data, especially for the apps you use most often. If you do not do this, the application will soon begin to freeze. Crash software may also cause the problem.

What to do if the Android application crashes?

Application developers make every effort to provide users with best experience working with the application, so they are constantly working to improve it. That's why it's important to regularly update all of your apps, or at least the ones you use on a daily basis.

• Open Google app Play.
• Click on three horizontal lines to open the menu.

• Then click "My apps and games."

• You can click "Update All" or browse through the apps and update only the ones you want.

What to do if an Android application or online game freezes or slows down?

Method 1: Connect to Wi-Fi or establish a high-quality Internet connection

Poor Internet connection quality may cause the application to crash or freeze. This usually happens with poorly coded applications.

Some apps work great when available excellent quality Internet connection, for example when you are connected to your home or office Wi-Fi. But if you are using 3G internet, online application may freeze or malfunction. If you are currently unable to connect to Wi-Fi and do not have a good Internet connection, try the following:

1. Activate airplane mode and reboot your device. After reboot, turn off airplane mode and activate mobile data.
2. Set up an Internet access point by checking with your telephone service provider.
3. Disable all applications and features that consume Internet traffic, such as location data.

Method 2: Clear cache and app data

We all have our favorite apps and use them daily. Over a period of time, the cache will accumulate and you may notice that the application runs slower each time or freezes and crashes frequently. This most often happens with applications such as Facebook, Viber, Instagram, Spotify, Maps, Messanger, WhatsApp, etc. After deleting the cache, the application will start working properly.

Here's what you need to do:

• Go to settings. Click "Applications" ("Application Manager", "Application Management", depending on the Android device).
• Find the app that is crashing or freezing and click on it.

• Then click "Clear cache".

• Click "Clear data" and then click "Stop".

Which applications place a heavy load on the system and consume a lot of resources?

What should you do if your phone freezes on the screen saver when you turn it on or off?

By completely deleting your phone data, you will delete all unnecessary and temporary files stored on your Android device. If some of the files are damaged, this will affect incorrect operation applications.

In order to implement complete removal phone data, you must boot your device into recovery mode. Each smartphone has its own combination of keys that must be pressed. Here are examples:

• Samsung devices: Home button, power button and volume down button.
• HTC and LG devices: Volume down button and power button.
• Nexus devices: Volume down button, volume up button and power button.

Follow these steps:

• Turn off your device. Then press and hold the key combination (the combinations above are for devices different manufacturers). Hold the buttons until the recovery menu appears.

• In the recovery mode menu, check the box "Wipe data" and click on the button Start.

• When the operation is completed, the device will reboot automatically.

In our world, people can no longer imagine life without a smartphone. He became an extension of our hand. For most people, the breakdown of their favorite gadget will cause panic and hysteria. This, of course, is not very good, but you have to put up with it. Modern mobile devices- very capricious things. Sometimes they behave unpredictably. In order not to be left without communication, you need to know what to do with the device if it suddenly “kicks up” and does not react in any way to the user’s actions. The most common problem with gadgets is that the phone does not turn on beyond the splash screen. What can you do to revive your “pet”? Let's try to answer this.

Possible causes of failure

There are several reasons for this behavior of the smartphone. And depending on them, the decision on repairs will be made. The first (and most common) reason that the phone does not turn on beyond the Android screensaver is a failure during the installation of the update. operating system. This happens because the Android OS is not very stable. That's not so bad. However, the same result can occur after the device is dropped from a considerable height. This is much worse.

Also common causes may be a malfunction of the battery, charger, or the gadget charging connector itself. Now let’s look at what to do if the phone doesn’t turn on beyond the splash screen. In most cases, you can fix everything yourself. Fatal breakdowns are extremely rare. But on initial stage The main thing is to correctly diagnose the problem in order to avoid making mistakes in the future.

System failure

This is the safest thing ever. If the operating system crashes, you need to go into recovery mode and reset the factory settings and clear the cache. Be careful! After this procedure there will be no one left third party application, user installed. You can enter recovery by simultaneously pressing the volume up button and the power button. True, for various models There can be different combinations of devices. Then you need to go to the Wipe data and factory reset item and confirm your choice. Then you need to check the box Reboot system now. after this the phone will reboot. If everything is fine, then the reason that the phone does not turn on beyond the Lenovo splash screen was precisely system failure. Sometimes resetting to factory settings doesn't help.

Then there is another option. You just need to reflash the phone. It's not that hard to do. The Internet is full of instructions for each specific smartphone. And at any adequate forum they will be happy to help you implement your plans. Don't lose heart.

If the reason is the battery and charging

You can check this very simply. It is enough to find a similar battery somewhere and similar charger. If, after replacing all the components, you do not see any changes, then the reason is that HTC phone does not turn on beyond the splash screen, much deeper than you thought. There are only two options: damage to the charging socket or the board itself. Dealing with a faulty battery or a “glitched” charger is easy. These are not particularly expensive smartphone components. They can simply be replaced with new ones. The problem with the hardware board will be much more noticeable. Here (in most cases) you can’t do without a visit to the workshop. Sometimes you have to pay a very significant amount for repairs.

If the reason is the board and hardware

It is very difficult to do something about this on your own. You need to have some knowledge of radio electronics and own the appropriate tools. If you have all this, then you can easily solve the problem. But if the phone does not turn on beyond the screensaver due to a faulty board, and you do not understand anything about this matter, then it is better to take the gadget to a service center. Because by arranging repairs on your own, you risk turning your device into a dead brick. You can try to find a familiar specialist who repairs smartphone hardware and save on repairs. But it is unlikely that he will resuscitate your device for free. Only if this is a very good friend. But, in any case, you will have to spend money on the Magarych. And it is unknown how much this will cost.

Extracting information from a broken Android

Even if the problem can be solved without financial investment, by simply flashing the firmware, users experience important question- how to save data stored in the phone memory. There are no problems with the memory card: you just need to remove it from the device. But how to save data from internal storage? For example, pull out contacts.

If you did backup copy system or at least turned on Google sync, then getting contacts will be very easy. All you have to do is go to the Contacts app on the Google website to see full list synchronized contacts. If you want to transfer them to another device, all you need to do is add a Google account to it.

To make it just as easy to get other information, you need to periodically make backups. copy of Android. Then if the phone reboots and resetting does not help, you can safely reflash it without worrying about the safety of the information.

Have you dropped your gadget into water?

First, you need to urgently remove the battery and cards, drying the device using paper napkins. Next, it is recommended to place the smartphone with the screen facing up and wait until it dries completely.

Please note: this process takes a long time – at least 48 hours. Under no circumstances should you turn on the device until two days have passed since its “bathing”.

Resume

Now you know the main reasons why the phone does not turn on beyond the screen saver. There are ways to combat this unpleasant phenomenon. Unless it's a hardware problem. But, as statistics show, in most cases this problem is caused by a failure of the operating system. And eliminating this annoying misunderstanding is very simple with the help of a few buttons.