• How to quickly find out the PUK code from an MTS SIM card via the Internet? All ways to find out PUK and PIN codes on MTS

    When purchasing a SIM card, subscribers additionally receive a paper containing PIN and PUK codes, which may be useful in the future for unlocking the SIM card. If your SIM card is blocked after entering an incorrect PIN number, a PUK code, also called personal code to unlock.

    Basics

    A Puk code is a special set of eight digits associated with a specific SIM card and used to unlock it. This is usually required if you enter the wrong PIN three times. When turned on, the mobile phone will prompt you to enter a PUK to open access to the card.

    Unlike the PIN, it cannot be changed; after purchasing the card, the operator recommends immediately writing it down in a notebook or keeping the card with the data at home, along with other important documents.

    If you enter the code incorrectly ten times in a row, the card is completely blocked.

    How to find out the puk code?

    The easiest way to find out the code is to find the plastic base that the card was attached to. It indicates the number of a specific SIM, operator numbers that you can call for consultation and codes - pin and pack. Be sure to make sure that your number is indicated on the found record.

    Otherwise, you will have to contact the operator and leave a request to restore the card and code.

    Recovery procedure

    If you are lucky and have found the PUK, you need to start unlocking the card. To do this, just turn on your mobile phone and then enter the combination you found. As a rule, after entering the code, you will be asked to change the PIN code. We strongly recommend that you take advantage of the offer and enter a new four-digit combination that you will remember. Otherwise, the next time you turn on the device, a PUK will be requested.


    Find your contract with Tele2, you may have written down your pack code in the contract.

    If you enter the wrong combination ten times, the card will be permanently blocked. To restore your number, you will need to contact us in person. service center and order a new SIM card. The cost of the service is 50 rubles.

    Recovering a forgotten PUK code

    Solving the problem over the phone

    Call 611 from the card available to you. For Tele2 subscribers the call is free. To connect to an operator, use the prompts voice menu. You may be asked for your passport information and to clarify the reason for blocking your card.

    Operator salon

    The second option is to go to the nearest mobile operator store. Please note that to restore the code you must contact the person to whom the card is issued directly. In addition, you will be asked for an identification document - passport, driver's or pensioner's license.

    Recovery using the Internet

    Recovery via Internet services, using email, personal account or filling out a form feedback. This method will take you longer, you will have to wait until the application is processed and a decision is made to restore the number. Then one of the center's consultants will contact you by calling or sending instructions by email.

    E-mail

    To restore via mailbox, you must write a letter to email address operator [email protected], indicating in it:

    • the reason why you are unable to contact one of the customer support centers or call hotline.
    • indicate information about the cardholder, including passport details, and telephone number.
    • attach scans of your passport or any other identification document to the letter. Otherwise, the application will not be considered.

    After processing your request, you will be sent instructions on how to restore your number.

    Personal account

    If you have a “Personal Account” on the company website, you need to:

    1. Log in to the system using the password you received earlier.
    2. Open the account settings section.
    3. Submit a request to unlock your SIM card.
    4. Wait for a response and follow the operator's instructions.

    Feedback


    In some cases, you may be refused a solution to the problem and advised to contact the office in person. This is due to the fact that the operator cannot always be sure that the number belongs to you, and customer safety is the main thing for the Tele2 company.

    Disable password prompt

    Unfortunately, you can't turn off the code request, but you can turn off the PIN code request. In this case, you can be 99% sure that you will not be asked for a pack code.

    It can be disabled in your phone's settings. In the "Security" or "Lock" section you need to find a section called "PIN" or "Codes". Next, you need to uncheck the “Request PIN” line. To confirm, use the code indicated on the card, or if it was changed by you, the code you previously specified.

    After this, be sure to turn off the phone and turn it on again to make sure that the code request is disabled.

    Questions from subscribers

    I forgot my pack code, how can I restore the card without it?

    You need to contact your operator. This can be done either in person by visiting the company’s office, or by calling the hotline operator at 611.

    Tell me where to get the puk code for tele2?

    The code must be written either in your service agreement, or on the plastic base to which the SIM card was attached. You can also contact the operator and request a pack code from him.

    Is there a universal (factory) bundle code?

    No, each card has its own unique code. There is no universal set of numbers for unlocking.

    The PUK code is used to improve the security of your SIM card. Prompted if you have previously entered your PIN incorrectly three times.. Each code is tied to a specific number and you cannot change the combination. If the card is blocked, it is highly recommended not to select the code yourself. It is advisable to immediately contact the operator with a request to restore the code and unblock the number.

    Entering the PIN code incorrectly results in the SIM card being blocked. In order to unlock the phone afterwards, you must enter the PUK code. MTS support service consultants very often have to face the question of how to find out the PUC code of a card. When opening sets with SIM cards, people basically throw away everything unnecessary, including the card holder with the notorious code. Due to this, people mainly turn to such articles.

    Methods for obtaining a PAK code on MTS

    Finding out the PUC code of a SIM card is very simple. To do this, you need to find the very base of the card on which the same code is depicted. More often this code can be seen on the plastic base to which the SIM card itself is attached. Once you have found out the PUK code, you need to enter it and wait for the request to enter a new PIN code. After installing it, the block will be removed from the SIM card, the phone will come into effect and communication services can be used again.

    Purchasing a connection kit requires serious consideration of the safety of the plastic base, because PIN and PUC codes are written on it. In other circumstances, you will have to contact MTS support for help. After all, the PUC code is static and each operator has access to codes associated with each specific SIM card. Data about them is stored in the operator's billing. To find out the PUC code, you need to call the number 0890 or 8-800-250-0890 .

    Dictate your mobile number and passport details. After you have been identified, a Contact Center employee will give you a PUK code. In addition, a similar procedure can be carried out at the nearest service center; the main thing is not to forget to take your passport with you.

    If your SIM card is blocked and you decide to throw it away, don’t worry, you can restore your number; to do this, you need to contact the nearest service center. You only need your passport and phone number to receive a duplicate card with a new PIN and PUK code. A titanic abundance of people every day are interested in how to find out PUK on MTS.

    It is very easy to find out the PAK on MTS; you just need to contact a qualified operator who will help solve your problem in the shortest possible time. The best way to learn PAK on MTS is described in detail in this article; after reading it, you will clearly find a solution worthy for yourself and your phone.

    The PACK code is needed to unlock the SIM card after the PIN code has been entered incorrectly. This code is a combination of eight digits when the PIN code consists of only four. If the subscriber enters the PIN code incorrectly, the SIM card is blocked.

    After which he is given 3 attempts to enter the correct combination. After blocking, a request appears asking you to enter a PUK code; without it, it is impossible to access the SIM card. Even if the card is installed in another phone, the situation will remain unchanged. Once you have found the eight-digit code, you need to enter it and complete the activation by pressing the confirm button.

    Next, enter a new PIN code and wait until the phone turns on. You can also get rid of the password prompt. There is a function to disable verification in the phone menu. However, this requires entering a valid PIN code. It was previously stated that the PUK code is tied to a specific SIM card and there is simply no functionality for changing it.

    It can be found using the operator mobile communications on MTS. You have 10 attempts to enter the correct PAK code. Guessing the code is a very stupid idea, because it is almost impossible. The only options in this situation are to contact support or try to look for it in the SIM card box. If 10 attempts to enter the correct PUK code have expired, then only a duplicate card can be restored, so you need to be extremely careful in these matters.

    When you receive a SIM card at the operator’s office, along with it you also receive digital security passwords, which are hidden under the layer. The layer can be easily erased with a coin. Passwords are needed to ensure that no one else has access to your card. If PIN code protection is set, after turning on the phone, only the subscriber who has these passwords will be able to use the card.

    You can find out the codes or restore them if you have forgotten them in several ways:

    • By looking at the passwords on the documents received when purchasing the card.
    • By taking your passport to an MTS service salon.
    • By calling contact center operator.

    The SIM card must be registered to you. You only need to contact the office with a passport, otherwise employees do not have the right to disclose such information. If you call the contact center, you will also have to dictate your passport details so that the employee can verify them and be able to provide you with the information.

    PIN code

    Consists of four digits. Entered on the phone every time the device was turned off. The SIM card is blocked if the password is entered incorrectly three times. If you wish, you can easily disable given password in your phone settings. To do this you will need:

    • Go to the device settings.
    • Find the "Security" menu.
    • Find the item " SIM lock"(or any other item that contains the abbreviation SIM).
    • Disable the device’s PIN code protection by first entering it correctly in the input field that appears).

    If the SIM card was still blocked after three incorrect entries, the subscriber is asked to unlock it by entering the PUK code. If the offer does not appear, you should enter the USSD command yourself **05*PUK code*new PIN#.

    You can change the PIN code yourself and without blocking the card. There are two ways:

    • Through the phone settings.
    • Using the following USSD command: **04*previous PIN code*new password*repeat new code*#.

    When changing the password, you can no longer set it with only four digits. The new code can include from 4 to 8 numbers, letters or special characters cannot be entered.

    PUK code

    The second stage of protection for an MTS subscriber’s SIM card. A digital password that already contains more numbers Enter it, set a new PIN and you can use the card again. If the documents on which the code was indicated are lost, it will only be possible to obtain it in the office or by calling the operator. You cannot change the PUK code yourself.

    If the PUK code is also entered incorrectly 10 times, the card is blocked completely. You will be able to access it again only by bringing your passport to the MTS office and replacing the SIM card. All security passwords on it will be new. SIM card replacement is carried out in offices free of charge, the number remains the same.


    Each MTS SIM card is protected by special digital passwords - PIN and PUK codes. At the request of the subscriber, the function of entering a PIN code after each switching on of the phone can be enabled. Such protection guarantees the safety of your data stored on the number if the SIM card ends up in the hands of a fraudster. However, it could not have happened here without pitfalls. If you enter the PIN code incorrectly three times, you will have to enter the PUK code to unlock the SIM card. If you make a mistake 10 times when entering this code, the number will be blocked. It is useless to try to guess the password; in this situation, it is wiser to think about how to find out the PUK code on MTS. This way you can avoid blocking the number and the resulting problems. after an incorrectly entered PUK code is quite problematic, so it’s better to find out. There are several options to get this code and we will consider them all.
    You can find out the PUK code on MTS:

    • By contacting the nearest MTS office with your passport;
    • By calling help center;
    • Through your MTS personal account;
    • In the documents received along with the SIM card upon purchase.

    The most effective way includes a personal visit to an MTS communication salon. They will tell you the code without any problems, but provided that the number is in your name. If you don’t want to go to the operator’s office, you can try to find out the PUK code remotely, for example, via the Internet or by calling the help center. True, there are some nuances here, which we will discuss in this article.

    • Attention

      • If after three attempts erroneous entry PIN code and the field for entering the PUK code has not appeared, enter the following command on your phone: **05*PUK*PIN#.

    Find out the PUK code through the MTS office and call the operator

    As stated earlier, the subscriber is given 3 attempts to enter the PIN code and 10 attempts to enter the PUK code. If you have exhausted all attempts, the SIM card will be blocked. Don’t worry too much, because the number can still be restored, but you can safely throw away the SIM card, since you definitely won’t need it anymore. To get your number back, you will have to visit the MTS office and write an application to restore your SIM card. If you are the owner of the number and can confirm this fact with the appropriate document (passport), then you will be given a free new SIM card and will provide PIN and PUK codes. However, it’s better not to let it all come to this, but to do this you need to figure out how to find out the PUK code on MTS.
    One hundred percent way to find out PIN and PUK codes is to contact the operator’s office. This option not suitable only for those subscribers who are not the owners of the number. No specialist will provide you with codes if the SIM card is registered in a different name. In such cases, you need to buy a new SIM card, or try to find out the PUK code through your personal account or call the help center, however, you will still need the passport information of the owner of the number.

    If the SIM card is registered in your name, you can safely go to the nearest MTS office. Be sure to take your passport with you, as well as a blocked SIM card. Upon presentation of your passport, an office employee will provide you with all the necessary passwords free of charge. Here you can change the PIN and PUK codes, of course, if necessary. By the way, PIN and PUK codes can be changed remotely. To set a new PIN code, dial the command on your phone: **04*old PIN*new PIN*new PIN#. PIN and PUK codes can contain from 4 to 8 digits. To change the PUK code, use a similar command, only replacing the PIN with PUK.

    Before finding out the PUK code for MTS through the operator’s office, we recommend looking for documents from the SIM card. These documents will definitely contain the necessary passwords, therefore, there will be no need to go to the office. If you couldn’t find the documents, but you still don’t want to go to the office, you can ask for the codes, although there are some nuances here.

    To find out the PUK code on MTS through an operator, follow these steps:

    1. Call 0890;
    2. Following the autoinformer prompts, contact the operator;
    3. Tell the help center specialist about your problem and ask for the PUK code;
    4. Be prepared to provide your passport details and name code word(if any).

    Unfortunately, this method is not always effective. We cannot say what exactly the operator is guided by, but sometimes the specialist refuses to provide the PUK code and asks to contact the nearest MTS office.

    How to find out the PUK code on MTS via the Internet

    If you read the article from the very beginning, then you know that the most effective way to find out the PUK code involves visiting an MTS office. Meanwhile, not everyone is happy with this option and the reasons for this may be different. Also, for many, the option of contacting the help center is not suitable. Most often, this happens when the subscriber is not the owner of the number according to documents. That is, a SIM card can be issued to a person with whom there is no opportunity to meet and no specialist will help you. In such a situation, there is only one option left. It's about personal account. This option cannot be called one hundred percent, but it’s worth a try.

    To find out the PUK code on MTS, follow these steps:

    • Find the “Personal Settings” section;
    • Activate the “SIM card” subsection;
    • Your PUK code will be presented on the page that opens.

    I guess we'll end here this review. We have provided all the known methods for obtaining information about the PUK code. In conclusion, it should be said about the importance of storing documents from the SIM card. These documents may come in handy many times, so take them seriously in the future and keep them.

    Each SIM has special protection that allows only the owner to use it. For this purpose, pin and pack keys have been implemented. When you buy a new SIM card, you receive a card or information brochure, which indicates personal information. Questions often arise about unlocking your mobile device. Today we will look at all the ways to find out the PUK code of an MTS SIM card.

    PUK code - what is it?

    The PUK code on MTS is a personal, security password. It is assigned by default to each new SIM card. It is unique and will not be repeated. Consists of eight digits. This numerical combination cannot be changed or corrected even in the MTS customer service salon. It is provided to each user along with a PIN code (four numbers). These must be entered when installing the SIM for the first time.

    All equipment and accessories should be purchased only from the provider's official points of sale. You may have seen people on the street who offer to buy a SIM card without formalizing or concluding an agreement. It is in such situations that subscribers expect many pitfalls. For example, the kit may not contain unlocking keys.

    When may you need a PUK code?


    After installation in the appropriate SIM slot, a request to enter a PIN key will appear on the screen of your mobile device. In the future, this combination will have to be entered after each start of the equipment, until the consumer disables this function. You should know that if you enter the wrong PIN three times, your smartphone and card will be automatically blocked. It is in this situation that the PAC code will help you. After this, the user is given ten attempts to enter the correct key, otherwise the SIM card will be permanently blocked. You won't be able to find the right sequence on your own, don't even try. After entering it correctly, the system will ask you to restore or come up with a new PIN code for subsequent initialization.

    So, the main use of the PAK code is to unlock SIM cards and cell phones.

    Attention! Don't throw away your security passwords after using them; you may need them in the future.

    In the future operation of your mobile device, you can remove constant requests for entering a PIN code after turning it on. The setting is done in the parameters SIM phone. You can set your personal password or remove it altogether. Finding the settings may differ for each model or brand.

    How to find out the PUK code

    If something bad happened to you and your card was blocked, and you forgot the treasured digital sequence PAK code on MTS, you should proceed from the following actions:


    All these steps are relevant if you want to find out the PIN code for your SIM card.

    How to unlock a SIM if there is no PUK code


    You can unlock an MTS SIM card if you don’t know the PUK only using the previously listed methods, namely, request information from specialized company employees. If you enter a sequence of numbers incorrectly more than ten times, you will forever lose access to your SIM card. But this is not the end, so as not to lose your number mobile phone you can always create a duplicate SIM card. To do this, just visit any sales and contracting office of the provider in your area. You will be asked to write an application according to the established form and provide your passport information.

    Today we looked at all the ways to find out your PUK code. In the future, be more careful and store your personal data in a safe place and do not throw it away.

    Read more: