How to blur the edges of a photo in Photoshop. How to quickly and easily make blurry edges in Photoshop

Good day everyone. my dear friends and guests of my blog. Today I would like to tell you about how to smooth the edges in Photoshop after cutting, because if you don’t do this, then these defects are too obvious, especially after oval discharge or rectangular lasso.

Simple smoothing

Let's start, perhaps, with the very simple way. Open two images (where you will cut and where you will paste). In my case it will be the bride and the beach.

At the end, you can also do a little shading. To do this, again go to the menu “Selection” - “Modification”, but now select “Feathering”. Here you need to set the dimensions of the shading itself. But don't bet too much. See for yourself how much is enough for you. For example, 6 was enough for me, but someone may need 15. Experiment. You can always go back.

Edge refinement

Well, now the method is a little more complicated, but more effective. We have already encountered this function when . But today we will need it for simple smoothing.

As a result, we get a very nice image, without any corners or gaps. Everything is smooth and neat. This is what we wanted. Well, of course, you can do further processing of the image, but more on that in another article. But the most important thing is that you now know how to smooth the edges in Photoshop after cutting.

Well, this is where I will end my article for today. But if you still want to improve your knowledge of Photoshop or learn it from scratch, then I recommend that you watch these cool video tutorials. Everything is very well told accessible language and will be understandable to any level of user. The course is truly finger-licking good.

Best regards, Dmitry Kostin.

If you don't know how to blur edges in Photoshop, then the following article will give a comprehensive answer to this question. To carry out this operation, use the “Photoshop in Russian” program, which has proven itself to be the best on the market. Read more about its other functions in our articles, and also watch training videos.

The presented utility was created specifically for domestic users; its menus and functions are completely Russified, so there should be no problems with learning. It is equally suitable for both professionals and beginners in the complex business (this is only at first glance) of photo editing.

What to do to blur edges in Photoshop

To blur edges in Photoshop, follow these steps:

Step 1.

Step 2.

Add a photo to the program. This can be done in several ways, the simplest of which is to simply click on the top “Open photo” icon after launching the utility. Photoshop supports working with all image formats that are used to save photos.

Step 3.

Step 4.

There are two ways to blur edges in Photoshop: using the “Masks (edge ​​processing)” function or doing it “manually” using a brush. To use the first method, select the “Design” tab and then the corresponding function. The masks available for use will appear in the right field of the menu. We invite you to experiment with parameters such as: background type (translucent, tinted, plain) and mask shape (complex, rectangular, rounded, stylized). Select the option you like and click “Ok”.

To paint the edges with a brush, click the water droplet icon on the left side of the menu. On the right, configure parameters such as: size, hardness, transparency, blur, and then “manually”, by clicking the mouse on the edges, process them in the way you need. This process takes much longer than applying a mask, but it allows you to achieve originality. After all, no one will repeat this exactly again.

Step 5.

Now you know how to blur edges in Photoshop, but we suggest you not stop there, but explore other functions of the program. To make your training as fast and comfortable as possible, we have prepared detailed information for you on every aspect. step by step instructions. For example, this one: . Read, study, create, “Russian Photoshop” was created especially for you.

Our article will be useful for both beginners and veteran users of the program Adobe Photoshop. Very often, photography enthusiasts are interested in how to blur edges in Photoshop in order to give the image originality. There are several ways to blur. Some people prefer to use layer masks for this, while others prefer the Gaussian Blur filter. This article will describe the easiest way to blur the edges of an image.

Simple blurring of the edges of a photo

1. We launch the program on the computer and open the image that needs to be processed. The first step to process a photo is to activate the working layer. To do this, click LMB on the lock icon so that the working layer becomes active.
2. Blurring the edges in Photoshop is done using the Rectangular Marquee Tool. Using this tool, you need to select with a frame the part of the image that needs to be blurred. Depending on how you want to blur the edges, you can choose any frame.
3. If, when processing a photo, the user does not create a second duplicate layer, but uses only the main one, it will be necessary to use the Inverse option, which is located in the Select menu.
4. In the “Selection” menu, you will need to select another option - Modify (Modification), which feathers the image. In order to perform feathering, you will need to select the required value for the radius of this action, which is specified in pixels.
5. Now, to blur the edges of a photo in Photoshop, you need to press the Delete key on your keyboard and see what happens as a result of these simple actions. Next, to get rid of the selections that were created at the beginning of processing, you need to use hot keys by simultaneously pressing the “Ctrl + D” combination on the keyboard.
6. The resulting image can be saved on your computer by setting the required format using the File menu - Save as....

This simple tutorial will allow you to create beautiful photo, the blurred edges of which will make it unique and unusual.

Good day to you, my dear friends. Christ is risen! How are you doing? How are you feeling? I have an excellent one! Feels like May. But let's move on to the article. Previously, from time to time I saw very interesting effect in photographs, when the edges are a little blurred, but the photo itself remains untouched. That's why I also decided to do the same effect on some of the images.

And today I will show you how to make blurred edges in Photoshop. And I will experiment on the old Spider-Man from the film of the same name. You can, of course, select the Blur tool and simply paint over the edges of the image. But in my opinion this method is not very good, so I will use others.

This is how we blurred the edges of the image. And it took us no more than a minute. But as you can see, the blur has clear boundaries. Some people like to leave it that way, while others prefer a smooth transition.

Advice: In fact, you don't have to make two selections with Alt held down. You can make one selection only in the place where the blur will go. And after that you need to invert the selection. To do this, press the key combination SHIFT+CTRL+I or select the menu “Selection” - “Inversion”. Then you will automatically have a selected frame.

Smooth blur

In order for us to have a smooth transition, we need to complete the first two points from the previous method, but then the course will change a little.

Please note ! The size of the Gaussian blur and feather radius depends on the size of the image itself. Here I was focusing on this particular size. Experiment.

Other Blur Methods

You don't have to use a Gaussian filter, there are many other blur filters. Let me show you another example, and then you can try it yourself.

I think it turned out great. The picture became more interesting. You can see for yourself other filters from the same group and see how they work and what effects they give.

Well, that seems to be all I wanted to tell you about this. Yes. This is a small and simple lesson.) But if you want to master Photoshop completely, then I strongly recommend that you fully study one cool video course. Thanks to it, you will be able to learn Photoshop in the shortest possible time, unless of course you are lazy.

Well, I'm done for today. I look forward to your comments on the topic. And by the way, be sure to subscribe to blog updates, then you will always know about the release of new articles on the topics you need. I also advise you to take a look at the blog, as there are a lot of articles and you will probably find something interesting for yourself. Good luck to you. Bye bye!

Best regards, Dmitry Kostin.

Instructions

To give the edges of a picture a blurry effect, you need to create a large area of ​​translucent pixels on the border of the image. This can be done by erasing part of the image with the Erazer Tool, hiding the edges of the image under a mask, creating a feathered selection, and deleting the selected part of the image. To process an image using one of these methods, load it into Photoshop.

Make the picture editable. To do this, click on the image layer and select the Layer from Background option from context menu.

Most obvious way Getting blurry edges is by erasing them. Select the Erazer Tool and adjust the diameter of the brush so that it is at least a third of the height of the image. Set the Hardness parameter to zero.

Run the tool along the edges of the picture, holding down left button mice. If there is too much of the image, cancel a few recent actions in the History palette and reduce the brush diameter.

The same effect can be achieved by creating a layer mask. To do this, click on the Add layer mask button, which is visible at the bottom of the layers palette. Activate brush tool Tool and configure it in the same way as the Erazer Tool.

Make black the main color by clicking on the top colored square in the tool palette. Activate the layer mask by clicking on the white rectangle to the right of it and paint the edges of the mask with black. When blurring the edges in this way, you do not change the image itself and, if necessary, you can copy the layer, remove the mask from it and get the original image without blurred edges.

A good way to create an area of ​​semi-transparent pixels is to feather the selection. To do this, select a part of the image that will not be changed. This can be done with the Rectangular Marquee Tool or the Elliptical Marquee Tool. If you need to create a selection with a more complex shape, use the Polygonal Lasso tool.

To feather the edges of the selection, use the Feather option from the Select menu. The value you need to enter in the Feather Radius field depends on the linear dimensions of the image. The larger the feathering radius, the smoother the edge blur will be. True, by assigning this parameter too great value, you can get not blurry, but translucent edges right up to the border of the picture.

Use the Inverse option from the Select menu to invert the selection and remove the selected part of the image by pressing the Delete key.

Save the image with blurred edges using the Save As option from the File menu.

Sources:

• Working with transparency
• edge blur is

Ways to blur edges There are many images in Adobe Photoshop. Some people prefer to use masks, others prefer Gaussian Blur. Start simple!

You will need

• computer, Adobe program Photoshop

Instructions

In the Select menu, click on the Inverse command. This step is necessary if you do not transfer your image to new layer, but you work on one.

Useful advice

The outline of the frame for blur can be made to any shape, round, oval, abstract. To do this, there are several selection tools on the toolbar - Lasso, Pen Tool and Rectangular Marquee Tool.

We all love beautiful photos. And no one will deny that the most beautiful photo Sometimes there is one in which only one or two objects in the foreground or background are in focus, and the rest are blurred. This function is available to those whose camera allows you to take such pictures. What should those who do not have such an opportunity do? In order for the viewer not to be distracted by details that are not important, and simply to take a beautiful processed photo, you can use a photograph.

You will need

• - computer
• - ACDSee editor of any version
• - photo to be processed

Instructions

Click on the "Selection" menu button. Tools will open in front of you. Select Free Lasso and draw a circle around which you want the background. Trace carefully, preferably along the inner contour of the outline, so as not to accidentally leave pieces of the background unblurred.

Once you have selected the object, click on the “Invert” button. The entire background surrounding the object should stand out. Click "Done".

Click on the "Blur" button. A menu will open in front of you with the degree of blur and the type of blur. The Gaussian blur method is considered the most natural and high-quality. Select the amount of blur you want to use. After that, click “Done” or simply save the photo.

Video on the topic

Please note

Do not highlight in chunks - the blur will be incomplete, the borders will be visible, this will spoil the overall impression of the photo.

Useful advice

Try not to overdo it with blur, remember that there must still be a background, and it is enough to focus attention on the desired subject.

Blurring the edges of an image is one of the artistic techniques that forces the viewer to focus their attention on the center of the picture or on the object that seems important to the author. In addition, it can give the image a slightly mysterious look and a romantic mood. There are several ways to achieve this in Photoshop. We will tell you about the most flexible and universal.

You will need

• We will need any version of Adobe Photoshop from the last ten years. The instructions are written for the most difficult situation, when the original Photoshop menus are in English and are not localized for a Russian user. Even under these circumstances, you can cope with the task with dignity.

Instructions

The universal and favorite tool of a computer designer, Adobe Photoshop, has been improving and becoming more complex for the third decade, in fact, being a standard and benchmark for any type of graphics programs created in the world these years. Mastering it means reaching a professional level. Many hundreds of image processing techniques and effects are available, but as often happens, the more sophisticated and solid the technology, the more difficult it is to make it serve you with just one click." magic button"But nothing is impossible for a pro.
Upload the original image. First of all, we need to decide what will remain untouched in our picture and what will be affected by the “foggy haze”. To do this, use the selection tool:

If we just need to blur the very edges of a rectangular image, we'll use the Rectangular Marquee Tool. Draw a rectangle, retreating some distance from the edge of the image.

If we need to select an object of complex shape, then we can use Lasso tool. Carefully outline the object, which will remain unaffected by the effect.
One way or another, we got a mask that defines the area of ​​the effect: we see how ants “march” along the contour we need, and the selection indicators flicker.

Now let’s press a few magic keys. Ctrl+Shift+I (that is, while holding down Ctrl and Shift, press the Latin I). Now the ants began to run around the area from the edge of the image to the untouchable object. This way we invert the selection. You can also do this by groping in the Select>Inverse menu, but, you see, this is a little longer than pressing Ctrl+Shift+I

And now another combination. Ctrl+J. Thus, we created a new layer, on which now appears our mysterious .

(If anyone is interested, this layer is visible in the list of layers; you can admire it separately by turning off the main image - by clicking the “eye” icon in the line with the layer of the original image.) If you don’t like it, you can do the same operation through the Layer menu >New>Layer via Copy
Thus, on top of the original image we have an independent layer on which we can perform any actions - blur it in any way to any extent.

Blur effects are in a separate submenu (Filter>Blur>). The choice here is for real gourmets. For example:

Gaussian Blur is the most natural and pleasing to the human eye. Classic "dregs".

Motion Blur adds dynamism to the picture.

Radial Blur can create the impression of an object rapidly moving away or flying towards the viewer.
By varying the parameters, you can achieve very different and tasty results.

Another convenient thing: since the frame subject to change is located on a separate layer, we can strengthen or weaken the effect by changing the parameters of this layer - for example, its transparency (Opacity parameter) at the top in the layers panel, or by changing its blending mode to the original image. So, by switching the parameter to Multiply or to Lighten, you can achieve a “vignette” effect - darkened or, on the contrary, “exposed” blurry edges of the picture. Experiment to your heart's content.

Having finished the layer-by-layer work, you can connect all the layers into single image. This is done in the Layer>Flatten Image menu.
So, if we don't need any special experiments, just upload the image, do rectangular selection, press Ctrl+Shift+I and Ctrl+J, then in the Filter>Blur menu we find Gaussian Blur, move the slider to the desired result, OK. And we return technical unity to the picture, by the Flatten Image team.

Sources:

• how to blur edges in photoshop

You can create several edges on a fragment of a photo or on the entire photo using Photoshop. in different ways, each of which can be used to solve different problems.

You will need

• Graphic editor Photoshop.

Instructions

Perhaps the most easy way, which does not require special skills to work with - using the Eraser Tool (called by pressing the E key). Select a tool, set it to Brush menu right size brushes with soft edges and finish the edges. Advantage this method The problem is that even those who opened it for the first time can blur the edges in this way. The only disadvantage is that processing will have to be done