How to drain a new phone battery. How to properly charge a new smartphone battery for the first time to extend its life

When purchasing a new device, everyone faces a problem: how to charge it correctly new battery? The service life of the device will depend on the actions taken in the future.

How to properly charge a new phone battery?

There are different opinions regarding how to properly charge the battery of a new smartphone.

Supporters of the first point of view believe that the battery charge should always be within the range of no lower than 40-80%. Another opinion is that the charge should drop completely and then charge to 100%.

In order to decide what actions you should take, you should find out what type of battery your smartphone is. There are the following types of batteries:

• nickel-cadmium;
• nickel metal hydride;
• lithium-ion;
• lithium polymer.

Nickel-cadmium and nickel-metal hydride power supplies are older. They are characterized by the so-called “memory effect”. It is in relation to them that recommendations regarding complete discharge and charging.

Currently, smartphones are equipped with modern lithium-ion and lithium polymer batteries, which do not have memory to charge. Therefore, they can be recharged at any time, without waiting for the battery to be completely discharged. It is not recommended to leave the power supply for charging for several minutes, as this will cause it to fail faster.

How long does it take to charge a new phone battery?

The answer to the question of whether you need to charge a new phone battery lies in a different algorithm of actions depending on the type of power source.

For good further work Nickel-cadmium and nickel-metal hydride batteries need to be “boosted”. To do this, do the following:

1. The power source should be completely discharged.
2. After turning off the phone, put it on charge again.
3. It is recommended to add about two more hours to the charging time specified in the instructions.
4. Then you should again wait until the battery is completely discharged and recharge it. This procedure is done about two times.

For x and lithium polymer power supplies, these steps are optional. They do not need to be “run” on a full charge.

To ensure that the power supply lasts as long as possible, it is recommended to adhere to the following rules when recharging it:

Thus, proper and careful handling of the smartphone battery will contribute to its better preservation and extend its service life.

Often, a purchased new mobile phone begins to upset the owner after a few weeks due to its low ability long time keep charging. Today there are a lot of myths about technical solution such a problem.

All of them are built on certain rules that all phone users need to know.

How to charge your phone correctly so as not to damage the battery

"Pumping" or "overclocking" battery should consist of 2 – 3 periods. This action is always performed in accordance with the instructions issued by the device manufacturer.

Charge for the first time li-ion battery you need to “pump” as follows:

• After unpacking the device, you first need to make sure there is a charge. Li-ion battery structures must be discharged to a minimum charge level. So that the battery can still function. To quickly discharge, you need to use energy-intensive functions - listening to music, taking photographs or watching videos. That is, you need to do everything to drain the battery.
• After the mobile phone signals that there is no energy in the batteries, the device must be connected to electrical network through the charger for 5 – 6 hours. When the phone notifies you that it is fully charged, you need to keep it in this state for another half hour.
• Next important point The process of how to properly charge your phone so as not to damage the battery is that you cannot use it while charging. It is advisable to perform this process with the device turned off.
• For lithium-ion battery design, you need to repeat fast discharge and fully charge at least one more time.

Important to know! The nickel battery needs to be filled with energy when it is completely empty. For a lithium-ion battery, this action is correctly performed at a charge level of 10%.

Myths of solving the question of how to properly charge your phone

To use the phone for a long time offline mode, you must follow the manufacturer's recommendations. You should also pay attention to the advice of experts service centers, helping to widely reveal the secrets of long-term battery life.

Tip 1. Old-style batteries are subject to strong heating when connected to the electrical network for a long time. This condition causes the battery to explode. Therefore, many people believe that the phone should not be left charging, for example, all night unattended.

In design modern batteries includes special elements that reduce the charging current when the battery energy indicator shows 100%. This reduces the possibility of overheating to a minimum. It follows that the battery will not deteriorate if you leave the phone charging overnight.

Tip 2. Many people believe that minimizing applications increases the duration of offline operation. Such actions are good for preserving the battery life of a laptop, but not a phone. This is due to the fact that Android freezes on its own background open applications and does not use additional energy for support.

In addition, opening again will require more charging. Therefore, you should not worry about having multiple applications open on your phone at the same time. They have virtually no effect on the rate of battery discharge.

Also, new models are equipped with charge level control elements. Therefore, no matter with what help charger charging, Samsung, LG or Sony.

Battery life

Each technical device has a service life. The telephone is no exception to this norm. Its working condition directly depends on the solution to the question of how to properly charge the phone in everyday life , so as not to damage the battery.

Battery life mobile phone usually 1 – 3 years. Then it wears out and begins to negatively affect the functioning of the device as a whole. To avoid this, the old battery must be replaced with a new element.

In addition, when using a mobile intercom, you should remember the following rules:

• When the phone long term is not in use, the battery charge is maintained at 40 - 50%. Storage should be carried out at room temperature, as the difference leads to the destruction of the battery.
• If the phone has been subjected to mechanical impact, then first of all you need to check the condition of the battery. If this element is swollen, do not connect the charger, as this can lead to disruption of the functioning of the device as a whole. The battery needs to be replaced.
• Overcharging quickly wears out the battery. Therefore, it is necessary to monitor the end of charging in order to disconnect the device from the electrical network in time.

Correct use of the battery

Each cell phone battery indicates what is prohibited from doing with it. This means disassembling it yourself, allowing it to get wet, hitting it, connecting it to non-original chargers, overheating and overcooling.

Violation of these requirements results in damage to the battery and even the gadget. The worst consequence is the element breaking into small pieces, which can seriously injure a person.

Experts do not recommend using “left-handed” batteries, despite their low cost. They recommend inserting “native” elements into gadgets high quality. This will help to avoid many troubles, the worst of which is the gadget catching fire.

Important to remember! A used battery should not be thrown away with regular trash. It must be recycled. Many electronics stores accept used batteries and then send them for recycling.

In order for your phone to live a long and happy life, you need to not only be wary of its awkward falls, but also not forget about correct charging battery Read more about this issue in our text.

This article is intended for persons over 18 years of age

Have you already turned 18?

Most people still believe that new smartphone, in particular its battery, after purchase it must be immediately discharged to zero. And only then can the new battery be used to its maximum potential. Unfortunately, this is not the case at all.

The fact is that modern cellular differs from prehistoric predecessors not only touch screen, the presence of the Internet and a built-in camera, but even a battery.

Previously, mobile phones were equipped with iron-nickel batteries, which actually had to be discharged immediately after purchase. This is due to the fact that these types of batteries had the so-called “memory effect”. The essence of the effect is very simple: when the battery was charged from 20%, the device accepted 80% as a full charge. Thus, due to the first unsuccessful charge, you have already lost 1/5 of your potential energy reserve. Therefore, it is not surprising that buyers of new smartphones are worried about such an issue as the first charge.

But there is no need to panic. Currently, in modern smartphones, lithium has replaced iron-nickel batteries. ion battery(i ion). Therefore in modern realities It is correct to ask not about how much to charge this or that device, but how to do it correctly.

Modern smartphones, for example, Honor or iPhone, require more regular recharging rather than charging the device in 1 times from 0 to 100%.

Under no circumstances should you allow your smartphone to discharge to 0% - such actions lead to the device gradually beginning to lose a potential amount of energy that cannot be restored in the future.

This is why smartphones remind you of low battery charge already at 20% and repeat when 10% remains. Remember that if your battery reserve has reached such a low value, then it must be charged. The optimal battery charge is between 40 and 80%. Stick to it, and then your smartphone will live as long as possible.

Also, experts from the Battery University portal note that it is advisable to charge the smartphone with 50% of the remaining energy. If you follow this nuance, then, according to research, the life of the battery will increase 4 times. If the smartphone has restored its power reserve to 100%, then you should not leave it on charge, since the device’s battery overheats, which also leads to a reduction in potential.

However, if you have such a lifestyle that your smartphone can only be charged at night, then especially for you modern market Energy-saving sockets are sold. This device has a built-in timer. Therefore, if you know that your gadget will achieve maximum charge After an hour and a half, set the time on the timer and relax quietly.

Also high quality original smartphones already have built-in charge controllers, which, when reaching 100%, independently turn off the flow of additional energy.

However, you need to periodically discharge the device before turning it off, but not more than once a month. This is due to the fact that due to regular recharging, the sensors that monitor the remaining energy may become confused. It is because of this that your device may unexpectedly turn off at 10%. Therefore, once a month, do not be afraid to discharge the equipment before turning it off, and then charge it to 100%, because in this way you will restore correct work sensors

By the way, you can learn about the capabilities of your battery easily and for free thanks to the Battery Life application. It will show the number of charge cycles of your device, battery wear, and also indicate which specific applications require the most energy.

How to properly charge a Xiaomi phone

If you are thinking of purchasing a new and fashionable one or have already acquired the ultimate Redmi 4x, then there is no point in worrying: charging such a device is much easier than discharging it, because the battery capacity of the latter is 4100 mAh.

However, if your “Xiomi” still loses ground and turns off at 20% charge, there is no need to panic; nevertheless, our instructions are universal and suitable for all types of modern smartphones. You just need to calibrate the charge sensors by discharging the phone to 0% and charging it to 100%.

If this doesn't help you, then the problem is probably technical aspects devices. In this case, do not be lazy to refer to the instructions, paying attention to what it says about the recharging duration. Leave the phone connected to the outlet for the specified amount of time. After this, if the phone is 100% charged, you can unplug it. Next, adhere to the above rules. If the phone still continues to act up, then you should contact technical support for advice.

How to properly charge your Android phone

Mostly modern smartphones They produce monolithic devices without the ability to change the battery. Dead battery - consider a new smartphone. This is why many owners modern devices They began to carefully monitor the health of the battery.

However, Android owners have repeatedly noticed that their phone begins to discharge faster in hot weather. The fact is that a lithium-ion battery drains much faster if you allow the device to overheat. Therefore, make sure that your smartphone is not charged while lying in the sun or near a radiator that is on.

Also, owners of Android smartphones are accustomed to using low-quality chargers, as well as cheap Chinese power banks. Despite the similarity appearance, the contents of such devices are seriously inferior to the original analogues. Therefore, no one can guarantee how many years such charging will last, and how its operation will affect your phone.

It is also worth considering that a traditional charger is divided into two types of charge:

1. Transformer: a traditional charger that charges the device with a constant, equal amount of energy.
2. Pulse: A charger with a built-in timer that stops the constant flow of energy after 4 hours of use. After this period of time, charging supplies the equipment with small impulses, maintaining the device’s charge without dangerous overheating.

How to properly charge a Samsung phone

As for the Korean media giant, charging the new Galaxy correctly is a piece of cake. In addition to the fact that the entire line of smartphones has software on Android, which is constantly updated, and the contents of the models are getting better and better every year.

For example, Samsung Galaxy S9 has a battery capacity of 3000 mAh when it is big brother S9+ has a capacity of 3500 mAh. It is not so easy to waste such a charge, but it is possible.

Remember, if your device is discharged, under no circumstances leave it in this state for a long period of time. One of the most common reasons customer requests to technical service - reluctance of the smartphone to turn on after a long discharge.

Otherwise, if you follow the above rules, there is no reason to worry. Samsung is reliable technology.

How to properly charge your phone battery with a frog

If you still haven’t acquired a smartphone with a built-in battery, and your phone cannot be charged using a standard charger, then you can always resort to using a “frog”.

The frog is a charger that can replenish the energy of completely different batteries. Externally, this unit has nothing in common with an ordinary amphibious creature - on one side of the device there is a plug for the socket, and on the other side there is a clamp that ensures contact with the battery.

An important advantage of this device is its versatility, which can charge both a phone battery and a camera battery. The operating principle is very simple: you just need to remove the battery from the device and connect it to the frog terminals. Once you plug the device with the battery into the outlet, the indicator lights will tell you whether it is charging. The light will also change to green when the battery is 100% charged.

It is also worth noting that modern models of this device got adapters and a USB port for phones with a built-in battery.

So, let's summarize:

• do not allow your smartphone to discharge to 0% (except for monthly preventive discharge);
• if it is discharged, put it on charge as quickly as possible;
• try to recharge your smartphone during the day;
• completely discharge and charge the device once a month;
• do not leave your smartphone on charge all night unless you use an energy-saving outlet;
• Do not allow the device to overheat.

Already a thing of the past, giving way to newer achievements, but still very popular and often found in various devices. After purchase, check if there is any charge left in it. If yes, then it must be spent. And only when the battery icon flashes or the device completely turns off, you can proceed. Connect to the charger and leave until fully charged, hours at 12-16. This is most convenient when no one will definitely need the device, and no one will use it.
Once fully charged, discharge the battery again to the very end and charge it again until it stops. Do these steps 3-4 times. This will serve to overclock the battery. You can now use the battery in normal mode. But still, try to stick to a full charge and. This will help the nickel battery last longer.

A newer and more advanced battery is lithium-ion (Li-Ion). It doesn't require overclocking. They can immediately do it as usual. However, try to stick to the following: discharge the new battery almost completely (until the battery icon flashes). Without waiting for the device to turn off, connect the battery to the charger. Charging can take up to 20 hours. By charging your battery correctly the first time and every time after, you will help it last longer and retain more energy.

Competent charging battery- the key to its stable and durable operation. The battery of any device should be charged following certain rules that are an integral part of its operation.

Instructions

When purchasing a device equipped with , be sure to read the instructions and find out how to care for the battery and maintain it in order. As a rule, the first use of a freshly purchased gadget in offline mode should be done before the battery, after which it is necessary to connect to the charger and charge for 12-15 hours. This procedure will allow you to “develop” the battery and bring it to life through the most rational use of the entire capacity. There should be at least three such cycles of complete discharge and long-term discharge.

When using the device, also try to use the battery completely, avoiding frequent connections of a partially discharged battery to the charger. Frequent use can damage the battery and significantly reduce its capacity. Find out optimal time charging battery, and don't charge it

How to extend the life of the battery of your smartphone, for example, Samsung on Android, or with any other OS?

Given the wide range of applications and versatility of new smartphones, especially those with the Android OS, it is not surprising that battery life has always been an issue for developers, manufacturers and users themselves.

On average, most smartphone batteries last from one to two days until they are completely depleted and require recharging.

Both power levels and battery life can be extended if managed effectively.

Not having a charger with you (there is no way to use it) or backup power, you should minimize your energy consumption.

This applies equally if it is lithium polymer, lithium ion, removable or non-removable.

How to properly charge a new battery for the first time in an Android smartphone and others

First let's see how to deal with new battery. New batteries must be fully charged before first use to obtain maximum power.

Nickel-based batteries should charge for 16 hours when first turned on and undergo 2-4 full charge/discharge cycles, while lithium-ion (li ion) batteries take about 5-6 hours.

Avoid completely discharging lithium batteries. Unlike nickel-cadmium batteries, lithium-ion batteries decrease in life with each full charge.

Therefore, you need to charge them when the battery indicator shows one stick. Lithium-ion batteries only support a certain number of recharges.

How to extend the life of the battery in an Android smartphone or any other

Store the battery in a cool place. Of course, you can't control the weather, but you can avoid leaving your smartphone in a hot car or in direct sunlight.

Also, check the battery while charging. If it is excessively hot, the charger may be faulty.

Read the label on back side batteries or technical characteristics refer to the manual to determine the type.

Useful tips to extend the life of your smartphone battery on any OS including Android

Nickel-based batteries (nickel-cadmium or nickel-metal hydride) typically suffer from a phenomenon known as the “memory effect.”

The “memory effect” comes from biochemical processes in the battery and in many cases, is misleading to consumers.

If you partially charge the battery large number times, the batteries “lose memory” and do not fully control the entire charge.

Nickel-based batteries suffering from memory effect can be restored by completely discharging and then fully charging (sometimes several times).

A good rule of thumb for this type of battery is to completely discharge it once every two to three weeks.

Lithium-ion batteries can be maintained by carefully recharging them under partial load. They do not require “refurbishment”.

Regardless of battery type, only use a charger suitable for your battery and stop using a charger that causes excessive heat.

Store batteries properly. If the battery will not be used for some time, remove it from the smartphone and store it in a cool, dry place.

Over time, dirt can accumulate on the contacts, which reduces the efficiency of power transmission.

Clean them with cotton swab or isopropyl alcohol. If the contacts are made of two different metals, such as gold and tin, corrosion known as "bimetallic or galvanic" occurs.

Solvents such as acetone are then often required to clean up such contact corrosion.

Be careful: this solvent dissolves plastic, so use a Q-Tip to avoid damaging the battery case or the smartphone itself. Good luck.