• How to reset network settings in windows xp. How to reset your wireless adapter settings

    Many users encounter a problem when the Internet and network stop working on their computer. Although the modem or router shows that the Internet is working. Therefore, Microsoft added to the operating system Windows opportunity execute self reset adapter parameters.

    This article will tell you how to reset Windows 10 network settings using updated system settings and how to reset network settings via command line. In any of the cases, use the netsh winsock reset command, which actually does the reset network settings.

    Before moving on to resetting network settings, you must first figure out whether it will help in a particular situation. The first symptoms of problems with the system’s network settings can be different, among them it is worth noting the most common:

    • File download speed is very slow.
    • After turning on the computer, literally within a few minutes the Internet disappears (although it works as expected for several minutes).
    • The computer does not automatically obtain an IP address.

    All current situations are described in the case of full operation of the Internet from the provider. Resetting network settings is only needed if there is a problem with your operating system.

    How to reset network settings in Windows 10

    This action will remove and then reinstall all network adapters and return for others network components their initial parameters. You may then need to reinstall another network software(such as VPN client software or virtual switches).

    After confirming the network settings reset, your computer will restart. When you turn on your computer for the first time after resetting the settings, the user will be asked to select the network on which your computer will be serviced.

    Until it becomes possible to reset the adapter's network parameters in the updated Windows settings 10 network settings were reset using a different method. The current command line method is also suitable for users previous versions Windows operating system.


    If the user receives messages, for example, the DNS server does not respond or the DNS server address cannot be found, then before executing the command netsh winsock reset You can try to reset the DNS cache. To do this you need to run the command ipconfig /flushdns in the command line running as administrator.

    Conclusions

    A complete reset of the operating system's network settings is an excellent solution to many problems. Therefore, we looked at how to reset Windows 10 network settings using system settings or through the command line. Reset if necessary network parameters in previous operating systems you can use the command netsh winsock reset, which actually helps to reset network parameters.

    Sometimes, it happens that the Internet connection settings go wrong or simply does not want to connect to the network (does not receive an IP address via DHCP). Similar problems can arise as a result of the operation of some malware(viruses). You can torture those for a long time. support from your provider or call a specialist at home. You can try to fix the problem yourself.
    To reset TCP/IP in operating systems Windows systems NT (2000/XP/Seven) exists special program netsh.exe.

    netsh.exe— (Network Shell) allows you to configure network parameters.

    Some nasty viruses get into WinSock and cause mischief.
    Symptoms:

    • The speed of downloading files via TCP is very low (while downloading via UDP can be fast);
    • When you turn on the computer for a while, a couple of minutes, the Internet works fine, but then it disappears completely (the speed drops to 0);
    • The Internet is working and the download speed is normal, but the downloaded file turns out to be broken because it is not downloaded completely (most likely the virus intercepts some of the packets during transmission, but sends a notification to the source that all packages have been successfully received).

    In addition to viruses, you can also “break” your Internet connection yourself (or it “got wrong”)

    Some examples:

    • The computer does not receive an IP address automatically (via DHCP);
    • IP addresses are pinged but not names;
    • The computer receives an IP address of the following type: 169.254.*.*;

    If you have cleared yourself of viruses, you can begin recovery. ATTENTION! The following procedures will reset your network settings. I strongly recommend rewriting the settings.
    To reset Winsock:

    If the first command did not help solve the problem, you can reset the TCP/IP stack to factory settings:
    There in the command line, enter the command:

    netsh int ip reset c:\resetlog.txt

    In this case, the reset log will be saved in the root of the C:\ drive; if you omit the c:\ prefix, the log will be saved in the current directory. After this, you should restart your computer.

    After using this command, the following registry branches will be reset to factory settings:

    SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\
    SYSTEM\CurrentControlSet\Services\DHCP\Parameters\

    You can use these commands together one after the other. By the way, they also reset the DNS cache.
    About DNS cache problems: For example, the site moved to another hosting, as a result its IP address changed. And since you have some not quite fresh data in your cache, when you enter the site name, you will be taken to the old IP address, where the site no longer exists.

    To avoid resetting all settings, try the command ipconfig /flushdns If it doesn't help, use netsh int ip reset resetlog.txt- this is guaranteed to help and reset everything related to network connections. 😉

    On a PC or laptop, the network has completely fallen off and it is unclear what to do next. In this case, you can reset your network settings and start from scratch.

    How to quickly reset network settings

    1. Go to the “Settings” menu using the Win + I key combination, then find the “Network and Internet” → “Status” item.

    2. Scroll to the bottom of the page and select "Network reset".

    3. A warning will appear stating that this action will remove and reinstall all network adapters and restore the original network settings. You may need to reinstall network software, such as the client.

    4. Click Reset Now.

    Everything is ready. Network settings have returned to their original settings. The solution is drastic, so take your time and try to fix the problem yourself. Of course, if you have no desire to understand the problem or contact a specialist, feel free to use this method.

    One more important detail. Before you reset, make sure that the problem is with your computer. Check other devices connected to the network. If they have similar problems, it may be a problem with the router or ISP.

    Friends, hello everyone! In this article we will again talk about resetting network Windows settings dows 7 and 10. Although over time nothing has changed in this regard, which means for the good old XP this instruction will do too.

    If you remember, there was already a thread on this topic, but the other day when troubleshooting network problems, it didn’t help me. The fact is that the combination of commands indicated in it did not work this time. For unknown reasons, the command line reported that it does not know such parameters.

    Therefore, I again went to the official Microsoft help to find a way out of this situation. And this is what I came to in the end.

    How to reset network settings of Windows 7, 10 and XP with one command?

    First, you need to run the command prompt as an administrator. How to do this was detailed. Next, we write in it just one line like this:

    Netsh int ip reset resetlog.txt

    After this, be sure to reboot the experimental computer. That's it, now everything to the network should be a thing of the past. By the way, if you want to get acquainted with the results of the work in detail netsh commands(Network Shell - a shell for configuring TCP/IP parameters) using a log file named resetlog.txt, you can also specify the following command:

    Netsh int ip reset c:\resetlog.txt

    Now at the root system disk The above file will appear. But the main point is that to successfully perform a reset, the file name at the end of the command must be specified. Also, before starting the process, be sure to write down your current network card settings.

    After all, the treatment procedure described in this article will lead to the removal of all effective values IP addresses. Well, friends, this article about resetting the network settings of Win 7 and 10 has come to an end. If so, ask your questions in the comments. And now, as always, let's watch another interesting video.

    Sometimes you need to reset the adapter. To carry out this task, you must enter the network connections section. This is done in the following order: you need to go to the control panel from the Start menu. Using the search system, find the adapter, then in the section for managing sharing and networks, select “Display network connections" Right-click on the adapter icon and select the “Disable” command before resetting the parameters wireless network. If you are required to enter or confirm an administrator password, you must provide the password or confirm.

    By right-clicking on the network adapter icon, select the enable command. If you are prompted for an administrator password or need confirmation, you must enter the password (confirm). The network adapter is now returned to its default settings. You can read about how to connect the DVR to the network in the corresponding section of this site. Now that the settings have been changed, you should try connecting to the network again. You can also use a network troubleshooter to verify that the adapter is working correctly.

    The sequence of actions is as follows: you need to open the troubleshooter. To do this, right-click the mouse to select the network icon located in the notifications and click the troubleshooting command. Information on how to send a message over the network and others useful tips available to visitors of this site. If, after performing the steps to reset the network adapter, as well as updating the drivers, the network troubleshooter still indicates that there are problems with the adapter, you still need to replace the adapter.

    Buy network adapter available in specialized stores. Its installation is easy. On special websites you can find information on how to install the adapter, how to set up a VPN network and much more. The device also comes with instructions with which you can install the network adapter yourself. If problems arise, you should seek the help of a specialist. If you decide that the adapter should not be used, then you must either remove it from the system or simply turn it off. Many users are interested in how to log into social networks. By clicking on the link or using the search system, you can get the necessary information.

    When you disconnect the adapter, it will become inactive, i.e., it will not be used. The sequence of actions is as follows: from the “Network Connections” component (opens by clicking on “Start” and going to the section for managing networks and sharing), through the search system you need to find the adapter (type “adapter” in the search window) and click on the “Show” item Network Connections" in the Network Control Center. All that remains is to click on the “disable” command. If a password or confirmation is required, you must enter the password (confirmation).

    Read more: