• How to copy and paste a background in Photoshop. How to copy a selected area to a new layer in Photoshop

    You can use the Move tool to copy selections as you drag them within an image or between images, or you can copy and move selections.

    You can use the Move tool to copy selections as you drag them within or between images, or you can copy and move selections using the Copy, Copy Combined, Cut, and Paste commands. Dragging with the Move tool saves memory because it doesn't use the clipboard.

    When a selection or layer is pasted between images of different resolutions, the pasted data maintains its pixel dimensions. This may result in the inserted fragment having incorrect proportions relative to the new image. Use the Image Size command to make the source and destination images the same resolution before copying and pasting, or use the " Free transformation» to change the size of the inserted fragment.

    Note. Depending on the color management settings and color profile of the file (or imported data), a message may appear indicating that the color information of the file (or imported data) is being processed.

    Understanding the copy and paste commands

    Copy Copies the selected areas on the current layer. Copy combined data Creates a combined copy of all visible layers in the selected area. Paste Pastes the copied selection to another part of the image or to another image as a new layer. If there is already a selection, the Paste command places the copied selection onto the current selection. If there is no current selection, the Paste command places the copied selection in the middle of the viewing area. Paste instead If the clipboard contains pixels copied from another Photoshop document, the selection is inserted into the same relative location within the target document that it occupies in the original. "Paste In" or "Paste Outside" Pastes the copied selection into or outside of another selection in the image. The original selection is pasted onto new layer, and the border of the final selection is converted to a layer mask.

    Copying a selection

    1. Select the area you want to copy.
    2. Choose Edit > Copy or Edit > Copy Merged Data.

    Good day everyone, my dear friends. That's what I told you about. But what to do with it now? In the same article I mentioned that they can be copied, moved, transformed, scaled, etc. But if we talk about all this here, then we definitely won’t fit it into one article. Therefore, I will talk about one thing.

    I decided to do this in this way: let’s leave transformation and scaling for articles on relevant topics, but today I’ll just tell you how to copy a selected area in Photoshop. And we will learn how to do this both inside one document and by copying this area to another document.

    Are you ready? Then what are we waiting for? Let's go!

    Let's say you have selected some area or object, and now you want there to be a lot of such objects on the document. It is more than possible to do all this. Moreover, I will even show you 2 methods, and you decide which one you like best.

    1 way

    Let's say you have selected an object and want to copy it. Nothing could be simpler. Press copy combination. Do you know her? Right CTRL+C. We automatically create a new layer, but don’t pay attention to that for now. In a few lessons we'll get into layers and you'll find out everything.

    These are the simple ways I wanted to show you. But in general, for a good mastery of Photoshop and each tool separately, I recommend that you look through this wonderful video course, thanks to which you can easily master Photoshop. The course is beautifully structured, everything is told in human language, and it is designed for any level of user. Be sure to watch it if you want to learn how to work in Photoshop.

    Well, I guess I’m done for today. I hope that the article was useful and interesting for you. And by the way, what method do you use (or decided to use)? Write in the comments.. Well, I wish you good luck in your further conquest of Photoshop. See you. Bye bye!

    Best regards, Dmitry Kostin

    Once the required area of ​​the image is selected, we can move, copy, duplicate or delete it.

    Let's look at what actions can be performed on selected image fragments in Photoshop.
    It should be noted that all actions with image fragments are performed in the active layer, i.e. directly in the layer where the image is located, provided that this layer is selected
    Let's open an image File (file) -> Open (open).
    Consider the operation " Moving».
    Let's select an arbitrary part of the image, for example, rectangular selection. Now let's place the selection tool inside the selected area and, by clicking the mouse button, begin moving. The selection began to move along with the pointer. However, the image did not change.
    Now select the “move” tool and perform the same operation. The selected area began to move along with the image fragment.
    Now let's deselect. The selected fragment is “pasted” into the image.

    Consider the operation " Copy».
    Edit (edit) -> Copy (copy). In this case, the selected part of the image was copied to the clipboard.
    Now in the main menu we select Edit (edit) -> Paste (insert). The copied part of the image appears in a new layer. The source of the image remains unchanged.

    If, when copying a selected area, you select the command Edit(edit) -> Copy Merged (copy merge), then not only the selected image fragment from the active layer, but also from all visible layers will go to the clipboard.

    Consider the operation " Removal».
    Let's select an arbitrary part of the image, for example, with a rectangular selection. In the main menu we select Edit (edit) -> Cut (cut).
    The selected area of ​​the image has disappeared. But by using the “cut” command, we do not destroy the selected fragment. He is the same as with the command Copy (copy), goes to the clipboard, from where we can retrieve it with the command Edit(edit) -> Paste (insert).

    Now select a fragment of the image and select from the main menu Edit (edit) -> Clear (clear). The selected fragment has disappeared. Moreover, insert it with the command Edit (edit) -> Paste (insert) will no longer be possible.

    Consider the operation " Cloning».
    Select an arbitrary part of the image. Now select the Move Tool and place it inside the selection. Next, press the key<Alt > and, without releasing it, let's start moving the pointer. We see that a copy of the selected image fragment is moved, while the original image does not change. Cloning (reproduction) of an image fragment inside the active layer occurs.
    Let's release the mouse button. The selected fragment has been fixed inside the original image and has now become part of it.
    We can continue cloning by dragging the selection, or finish by deselecting it.

    That. We looked at how you can copy, delete and clone a selected portion of an image in Photoshop.

    Beginner users often wonder how to cut and paste an object in Photoshop.

    Selecting and further copying/cutting an element is the main task that you need to master for image editing.

    Let's take a closer look at everything possible ways, which even a beginner can quickly master.

    Before performing any manipulations with parts of the drawing, they need to be selected. Only then is insertion or cutting applied.

    With the Select-Paste feature, you can combine elements from multiple designs, choose your own background, and create unique designs. Before you start, choose an image whose background you like and a picture of the object you want to cut out.

    Method 1 – Using the “Magic Wand”

    « Wand"or "Magic Wand" is one of the simplest tools in Photoshop. With its help, you can quickly select a part and carry out a series of manipulations with it.

    The advantage of working with this tool is its speed. A beginner will not have to deal with channels, backgrounds and layers. The tool is available in all versions of the editor.

    The magic wand highlighting algorithm automatically detects the shades of pixels that border other parts of the photo. We recommend using a stick if the photo with the subject has a wide palette of colors. In the photo with a large number Some solid, similar colors may be highlighted incorrectly.

    Follow the instructions:

    • Open Photoshop program and create a new canvas or open an existing drawing with an object using the program;
    • On the left side of the window there is a basic toolbar. Click on the fourth element and select “Magic Wand” from the drop-down list, as shown below:

    Rice. 2 – “Magic Wand”

    • The wand creates selection boundaries based on the shades of objects in the picture. You need to click the cursor on the desired area of ​​the image to create a selection. We recommend using Magic Wand for large, solid-colored objects such as the sky, grass, mountains, etc.;
    • Let's select the sky in the next image. To do this, in Insurgents, click on the magic wand and select any part of the sky with the mouse. The following outline will be created around the part;

    Fig.3 - sky selection

    • Often the Magic Wand does not select the entire part and users stop using the tool. This should not be done, because you can simply add the missing area to the general selection.
    • While most of the sky is outlined, move the cursor to another part of it. Clamp Shift key and at the same time click on the unselected area. This will allow you to add it to the desired part. We get the following result:

    Fig. 4 – setting object boundaries

    Method 2 – Working with the Quick Selection Tool

    Quick selection(Quick Selection) is another basic tool that every Photoshop user should learn to use.

    It can be found in the same tab as the magic wand (Toolbar-Selection-Quick Select). The function works like a brush. With its help, you can create precise selections based on contrasting edges. You can choose the size and diameter of the brush yourself:

    • Select the tool as shown in the picture;

    Fig.5 – Quick Selection

    • Now make a selection. You need to hold down the left mouse button and move the cursor inside the area you want to select. To indicate boundaries, draw near the edges. Thus, the contour line will gradually move towards the edge you need.
    • To cancel a failed action, press the Ctrl+D key combination and try again. The image below shows an example of gradually selecting an area of ​​a flower using Quick Selection.

    Rice. 6 – sketch with quick selection

    As you can see, the boundaries of the resulting object do not extend to another part of the picture. Even with magnification and detailed viewing of each line, you will not see flaws or extra pixels.

    Method 3 – Quick mask

    Quick mask(Quick Mask) is a mode in Photoshop that allows you to select an object in a photo. What is the difference between using a mask and the standard tools described above?

    The point is that standard methods They are good at identifying parts of the picture that have contrasting pixel colors, but they cannot determine the clear boundaries of an object, part of which is a gradient or a blurred area. Also, it will be difficult to set the selection boundaries if the color of the part is very similar to the background.

    The essence of Quick Mask: the user selects one part of the photo, and the other is automatically blocked and cannot be worked with. A mask is the outline itself, which separates the element from the main design. A quick mask is a selection in which the selected part will have its original color, and the remaining areas will be covered with a translucent film.

    Rice. 7 – example of a mask in Photoshop

    The convenience of working with the tool is that you draw the selected area yourself and can correct flaws at any time.

    A quick mask will allow you to accurately select part of the image. Follow the instructions:

    • Select the Quick Mask tool from the toolbar or simply press the Q key on your keyboard while the Photoshop window is open;

    Fig.8 – key for selecting Quick Mask

    • In the window that appears, select the type of brush, its diameter and other parameters depending on the area that you will paint;
    • Now just sketch out the unnecessary part of the picture, leaving only the object for cutting and pasting. The masked area will be colored red;
    • You need to apply the mask with the black color selected on the palette. To remove part of the masked area, select white.

    Rice. 9 – creating a mask

    You can do whatever you want with the resulting selection. Photoshop will not recognize the background, so you can select the subject very easily. Use the “Quick Selection” or “Magic Wand” tools already described above, or click on the combination keys Ctrl-A, selecting the entire space (without the masked area).

    Fig. 10 – area selection

    If you need to highlight part of a picture, but you want the borders of the element to be not clear, but gradient (smoothly blending into the background new picture), you need to use a mask gradient. The principle of creating a selection is similar to the previous instructions:

    • Enter the quick mask mode;
    • In the Options tab, select Radial Gradient Mode. On the color palette, make the foreground color black and the background color white;
    • Make sure that the gradient direction option is set to “Foreground to Background”, that is, from the main colors to the background color;
    • Now create a selection. Set the center of the object and carefully move the cursor from the center to the edges.

    Fig. 11 – choosing the center of the object

    Once you've finished creating the borders, copy the element onto the background of another image. The object will have a translucent appearance and blurred borders. You can adjust these parameters in the layers window of the new drawing.

    Fig. 12 – insert with gradient preservation

    Method 4 – Magnetic Lasso

    Magnetic lasso belongs to a group of more complex program tools. It should be used if you are cutting out complex parts of the picture. For example, the human body, parts of the hands, hair and other elements that require pixel precision.

    Fig. 13 – display of the Magnetic Lasso in Photoshop

    The peculiarity of this element lies in its operating algorithm. It does not analyze the color of pixels, but looks for the edges of the object. Then a point is created to which the lasso is drawn. In this way, a precise selection of a specific area of ​​the project is gradually created.

    Take an image that has a difficult object to isolate. It is advisable that it contrasts well with the background so that it is more convenient for you to draw borders:

    Fig. 14 – example of a drawing

    Select a tool and zoom in on the image. Move the circle pointer to the edge of the object and click to set the starting point for creating the border.

    Now release the mouse button and simply move the cursor along the edge of the element so that its lines do not extend beyond the cursor circle. A selection will gradually be created:

    Fig. 15 – example of selecting boundaries using Magnetic Lasso

    To quickly zoom in or out of an image, press Ctrl and + or Ctrl and –, respectively. The path will automatically close when the last lasso point connects to the first. Then click on the first point to create a general outline.

    If you need to remove part of the background that may be inside an object, press the Alt button and select it using the magnetic lasso - the subtraction mode will turn on without canceling the previous selection.

    Fig. 16 - removing part of the background that overlaps the object

    You can now move, cut, or paste an element into another project. All extreme lines will look very realistic, without the need to remove flaws in enlarged mode.

    Fig. 17 – the result of moving the selected area

    Cut, paste and move

    Once you've mastered one of the selection methods you like, you can move on to moving, cutting, or pasting an object.

    To move the selected element to another part of the picture, simply press the space bar. The “Hand” icon will appear instead of the cursor. By clicking on the selected area, you can move it to any part of the project.

    Fig. 19 – moving and inserting

    If you need to cut an object, after selecting it, right-click on it. Select “Cut” or “Delete” from the context menu. You can also use the “Editing” tab. It contains all the necessary functions for working with the selected part of the image.

    Saving the final project

    After editing the final image, click on the “File-Save As...” tab. In the new window select required format file, enter a name and decide on the final folder where the project will be moved.

    Fig. 20 – Saving work in Photoshop

    Bottom line

    Now you can select objects in a picture in Photoshop and cut or move them. Before choosing a selection method, be guided by the recommendations described in the article. The quality of the result depends on how correctly you have decided on the type of drawing and the appropriate tool for the job.

    Thematic videos:

    Photoshop cut object and paste into another picture

    How to cut an object and paste it onto another background in Photoshop

    How to Cut and Paste an Object in Photoshop - 4 Best Methods

    The article is about a small nuance that allows you to use the copy to new layer function. Not everyone knows about the mode in which this convenient command works in Photoshop. The lesson is intended for a beginner audience.

    It often happens that it is necessary to transfer an already selected part of the image to transparent background new layer.

    To do this, click once on the Magic Wand tool. And then you will have access to the Layer via Copy function, which can be easily called by right-clicking the mouse. In the Russian version, this will mean copying to a new layer. Select this line, and your selected area will immediately appear on a new layer. That's all the wisdom.

    Often, beginners find this simple operation difficult precisely because the Photoshop program performs this command not in all modes. It does not display a context menu in Pen, Lasso, Move, or other modes. She silently demands that the instrument, namely the Magic Wand, be displayed. And then context menu When you right-click the mouse, it immediately becomes bright and ready to go.


    • This article will help speed up performance Adobe programs Photoshop. It explains in detail all the settings related to performance. Additionally, I am attaching explanatory screenshots taken by me...


    • The article provides a method for getting rid of the background by selecting and moving the image onto a created transparent file....


    • Small information article about choice home printer for printing photos. The emphasis is on choosing between inkjet and sublimation...


    Read more: