• Moving photos between document tabs in Photoshop. Learning to use the Move Tool in Adobe Photoshop

    While working in Photoshop, you constantly need to move objects around. For these purposes it is used Move tool. In this article, you will learn everything you can do using Move and what other useful features it has.

    There are two possible scenarios for this action:

    1. Just move the fragment. In this case the tool will work as a command Cut, that is, after moving to this place there will be emptiness.

    Example

    Let's say you need to select a word in a picture (which is part of the picture) and move it somewhere else:

    Let me remind you that to create such a selection, as a rule, use .

    2. Move the contents of the selected area, automatically creating a copy of it. To do this, you need to hold the Alt key on the keyboard.

    Example

    The same case when you need to move text, but the task is to automatically create a copy of it:

    When moving the contents of a layer or selection, make sure that the correct layer is selected in the Layers palette. If this is the content of a selected area, then first select the layer that contains this fragment.

    If you selected an empty layer, or the selected selection does not include a single pixel, then Photoshop will show you .

    If you need a fragment that was created by overlaying two or more layers, then start with these to create one layer, to which you will apply the movement of the fragment of the selected area.

    3. Move objects from one tab to another

    In Photoshop there are many ways to add a picture to a picture. One such way is to use the Move tool.

    To do this, you need to place tabs with pictures () on the workspace so that you can all see them. Then take the tool, left-click the contents of one tab and, without releasing the mouse button, move it to another tab.

    Example

    4. Align objects to the center and edges

    The options bar contains commands that allow you to automatically align objects relative to the entire image or its individual fragment.

    In the options bar, most of the functionality is taken away by the alignment buttons. But besides them there are other settings.

    Auto select

    By checking this option, you will change the way you select an object to move. If in normal mode(without a checkmark) first you need to select a layer in the palette, and then move it, then with activated mode Auto-select, Photoshop will move the layer you hovered over in the image itself.

    This is convenient when the image has many layers with small details that have to be constantly moved. Moving your hand to the layers palette and back, and also having to find the thumbnail of the desired layer, takes a lot of time. This mode will significantly speed up work productivity. The main thing is to clearly understand which objects are on separate layers and clearly aim the mouse pointer at their pixels.

    Here I would also add another similar tool option for selecting layers to move - Right-clicking on the image brings up the layers menu. That is, this menu shows the names of all layers that have their pixels at this point, and the top one in the list will be the one whose pixels are higher than the rest.

    Show controls

    If you check this option, then all the objects that you select to move will be displayed immediately with a frame with markers. With its help, you can immediately change the size of objects, their angle of inclination and call .

    If you notice an error in the text, select it and press Ctrl + Enter. Thank you!

    Instructions

    Open the images you'll be working with in Photoshop. To do this, use the Open command from the File menu or the Ctrl+O keyboard shortcut. In the Explorer window, select the ones you need by clicking on them with the left mouse button while pressing Ctrl key. Click on the "Open" button.

    Insert one image on top of another. To do this, left-click on the window with the file that you are going to insert on top of another image. Select the image using the keyboard shortcut Ctrl+A or the All command from the Select menu.
    Copy the selected image using the keyboard shortcut Ctrl+C. You can use the Copy command from the Edit menu.

    Navigate to the image you are going to use as the background by left-clicking on the window with that image.
    Paste the copied image using the keyboard shortcut Ctrl+V. The same can be done using the Past command from the Edit menu.

    If necessary, resize the inserted image. To do this, in the Layers palette, left-click on the layer with the inserted image and apply the Transform command, Scale item from the Edit menu. Reduce or increase the size of the picture by dragging the mouse on the corner of the frame that appears around the image. Apply the transformation by pressing the Enter key.

    Hide unnecessary details of the image superimposed on the background, or change the transparency of individual parts of it using a layer mask. To do this, left-click on the Add Layer Mask button, which is located at the bottom of the Layers palette. In the Tools palette, which is located on the left side of the program window, select brush tool Tool (“Brush”). Left-click on the layer mask icon. Paint over those parts of the inserted image that you want to hide with black. They will become transparent. In order to receive smooth transition from the inserted image to the background, reduce the Hardness parameter of the Brush tool. You can configure the brush settings in the Brush panel, which is located under the main menu.

    Adjust the colors of the top layer by adjusting the color balance. This can be done through the Image menu, Adjustment item, Color Balance subitem. By moving the sliders, achieve harmonious combination bottom and top layer.

    Save the result using the Save command from the File menu. To be able to return to editing the layers in this file, save it in PSD format.

    Beginner users often wonder how to cut and paste an object in Photoshop.

    Selecting and further copying/cutting an element is the main task that you need to master for image editing.

    Let's take a closer look at everything possible ways, which even a beginner can quickly master.

    Before performing any manipulations with parts of the drawing, they need to be selected. Only then is insertion or cutting applied.

    With the Select-Paste feature, you can combine elements from multiple designs, choose your own background, and create unique designs. Before you start, choose an image whose background you like and a picture of the object you want to cut out.

    Method 1 – Using the “Magic Wand”

    “Magic Wand” or “Magic Wand” is one of the simplest tools in Photoshop. With its help, you can quickly select a part and carry out a series of manipulations with it.

    The advantage of working with this tool is its speed. A beginner will not have to deal with channels, backgrounds and layers. The tool is available in all versions of the editor.

    The magic wand highlighting algorithm automatically detects the shades of pixels that border other parts of the photo. We recommend using a stick if the photo with the subject has a wide palette of colors. In the photo with a large number Some solid, similar colors may be highlighted incorrectly.

    Follow the instructions:

    • Open Photoshop and create a new canvas or open an existing drawing of an object using the program;
    • On the left side of the window there is a basic toolbar. Click on the fourth element and select “ Magic wand" as shown below:

    Rice. 2 – “Magic Wand”

    • The wand creates selection boundaries based on the shades of objects in the picture. You need to click the cursor on the desired area of ​​the image to create a selection. We recommend using the Magic Wand for large, solid-colored objects such as the sky, grass, mountains, etc.;
    • Let's select the sky in the next image. To do this, in Insurgents, click on the magic wand and select any part of the sky with the mouse. The following outline will be created around the part;

    Fig.3 - sky selection

    • Often the Magic Wand does not select the entire part and users stop using the tool. This should not be done, because you can simply add the missing area to the general selection.
    • While most of the sky is outlined, move the cursor to another part of it. Clamp Shift key and at the same time click on the unselected area. This will allow you to add it to the desired part. We get the following result:

    Fig. 4 – setting object boundaries

    Method 2 – Working with the Quick Selection Tool

    Quick selection(Quick Selection) is another basic tool that every Photoshop user should learn to use.

    It can be found in the same tab as the magic wand (Toolbar-Selection-Quick Select). The function works like a brush. With its help, you can create precise selections based on contrasting edges. You can choose the size and diameter of the brush yourself:

    • Select the tool as shown in the picture;

    Fig.5 – Quick Selection

    • Now make a selection. You need to hold down the left mouse button and move the cursor inside the area you want to select. To indicate boundaries, draw near the edges. Thus, the contour line will gradually move towards the edge you need.
    • To cancel a failed action, press the Ctrl+D key combination and try again. The image below shows an example of gradually selecting an area of ​​a flower using Quick Selection.

    Rice. 6 – sketch with quick selection

    As you can see, the boundaries of the resulting object do not extend to another part of the picture. Even with magnification and detailed viewing of each line, you will not see flaws or extra pixels.

    Method 3 – Quick mask

    Quick mask(Quick Mask) is a mode in Photoshop that allows you to select an object in a photo. What is the difference between using a mask and the standard tools described above?

    The point is that standard methods They are good at identifying parts of the picture that have contrasting pixel colors, but they cannot determine the clear boundaries of an object, part of which is a gradient or a blurred area. Also, it will be difficult to set the selection boundaries if the color of the part is very similar to the background.

    The essence of Quick Mask: the user selects one part of the photo, and the other is automatically blocked and cannot be worked with. A mask is the outline itself, which separates the element from the main design. A quick mask is a selection in which the selected part will have its original color, and the remaining areas will be covered with a translucent film.

    Rice. 7 – example of a mask in Photoshop

    The convenience of working with the tool lies in the fact that you draw the selected area yourself and can correct flaws at any time.

    A quick mask will allow you to accurately select part of the image. Follow the instructions:

    • Select the Quick Mask tool from the toolbar or simply press the Q key on your keyboard while the Photoshop window is open;

    Fig.8 – key for selecting Quick Mask

    • In the window that appears, select the type of brush, its diameter and other parameters depending on the area that you will paint;
    • Now just sketch out the unnecessary part of the picture, leaving only the object for cutting and pasting. The masked area will be colored red;
    • You need to apply the mask with the black color selected on the palette. To remove part of the masked area, select white.

    Rice. 9 – creating a mask

    You can do whatever you want with the resulting selection. Photoshop will not recognize the background, so you can select the subject very easily. Use the Quick Selection or Magic Wand tools already described above, or click on the Ctrl-A keyboard shortcut to select the entire space (without the masked area).

    Fig. 10 – area selection

    If you need to highlight part of a picture, but you want the borders of the element to be not clear, but gradient (smoothly blending into the background new picture), you need to use a mask gradient. The principle of creating a selection is similar to the previous instructions:

    • Enter the quick mask mode;
    • In the Options tab, select Radial Gradient Mode. On the color palette, make the foreground color black and the background color white;
    • Make sure that the gradient direction option is set to “Foreground to Background”, that is, from the main colors to the background color;
    • Now create a selection. Set the center of the object and carefully move the cursor from the center to the edges.

    Fig. 11 – choosing the center of the object

    Once you've finished creating the borders, copy the element onto the background of another image. The object will have a translucent appearance and blurred borders. You can adjust these parameters in the layers window of the new drawing.

    Fig. 12 – insert with gradient preservation

    Method 4 – Magnetic Lasso

    Magnetic lasso belongs to a group of more complex program tools. It should be used if you are cutting out complex parts of the picture. For example, the human body, parts of the hands, hair and other elements that require pixel precision.

    Fig. 13 – display of the Magnetic Lasso in Photoshop

    The peculiarity of this element lies in its operating algorithm. It does not analyze the color of pixels, but looks for the edges of the object. Then a point is created to which the lasso is drawn. In this way, a precise selection of a specific area of ​​the project is gradually created.

    Take an image that has a difficult object to isolate. It is advisable that it contrasts well with the background so that it is more convenient for you to draw borders:

    Fig. 14 – example of a drawing

    Select a tool and zoom in on the image. Move the circle pointer to the edge of the object and click to set the starting point for creating the border.

    Now release the mouse button and simply move the cursor along the edge of the element so that its lines do not extend beyond the cursor circle. A selection will gradually be created:

    Fig. 15 – example of selecting boundaries using Magnetic Lasso

    To quickly zoom in or out of an image, press Ctrl and + or Ctrl and –, respectively. The path will automatically close when the last lasso point connects to the first. Then click on the first point to create a general outline.

    If you need to remove part of the background that may be inside an object, press the Alt button and select it using the magnetic lasso - the subtraction mode will turn on without canceling the previous selection.

    Fig. 16 - removing part of the background that overlaps the object

    You can now move, cut, or paste an element into another project. All extreme lines will look very realistic, without the need to remove flaws in enlarged mode.

    Fig. 17 – the result of moving the selected area

    Cut, paste and move

    Once you've mastered one of the selection methods you like, you can move on to moving, cutting, or pasting an object.

    To move the selected element to another part of the picture, simply press the spacebar. The “Hand” icon will appear instead of the cursor. By clicking on the selected area, you can move it to any part of the project.

    Fig. 19 – moving and inserting

    If you need to cut an object, after selecting it, right-click on it. IN context menu select "Cut" or "Delete". You can also use the “Editing” tab. It contains all the necessary functions for working with the selected part of the image.

    Saving the final project

    After editing the final image, click on the “File-Save As...” tab. In the new window select required format file, enter a name and decide on the final folder where the project will be moved.

    Fig. 20 – Saving work in Photoshop

    Bottom line

    Now you can select objects in a picture in Photoshop and cut or move them. Before choosing a selection method, be guided by the recommendations described in the article. The quality of the result depends on how correctly you have decided on the type of drawing and the appropriate tool for the job.

    Thematic videos:

    Photoshop cut object and paste into another picture

    How to cut an object and paste it onto another background in Photoshop

    How to Cut and Paste an Object in Photoshop - 4 Best Methods

    Good afternoon. Today I will tell you how to transfer an object to another background using Adobe tools Photoshop.

    I haven’t written lessons on Photoshop for a long time, because I’m recording a voluminous video course for you, without water and at a very high level. affordable price, which will be affordable for everyone.

    Since it's summer, let's take a beautiful seascape and add... a seagull! You can take these same photos for training.

    Step 1. Open a photo of the sea, in our case. And open the photo of the seagull in another tab.

    Cut out a photo of a seagull (Ctrl+A -> Ctrl+X) go to the photo of the sea and insert a photo of a seagull (Ctrl+V).

    Step 2. Now we need to apply the tool "Transformation". Since the seagull is larger than the sea drawing. And now we need to reduce it to the size we need.

    For this I use Edit -> Free Transform Free transformation) for the seagull layer.

    We reduce the seagull to the size we need. Also hold Shift so that the photo in Photoshop is reduced proportionally.

    Step 3. Now comes the hard part. We need to cut out the seagull to get rid of its background so that it floats above our sea.

    There are many tools for this, you can use "Magic wand" which will do everything quickly and for you. But in my case it didn’t work, so I use "Magic Eraser".

    Once selected, cut out the seagull (Ctrl+X), hide the layer with the seagull background and paste the seagull into new layer. Something like this will come out.

    Pay attention to the layers

    Let's take a look various ways how to do it.

    Method 1

    First, let's switch to the photo we want to move. In my example, I will move the wedding couple into the photo with roses. So, I click on the name of the document tab with the pair to select moveable photos. As a result, a photograph of the couple is displayed in the Photoshop working window:

    Now take the Move Tool:

    And click in any area of ​​the photo. Then, holding down the mouse button, drag the cursor over the name of the tab of another photo. Don't let go of the key!

    When you hover the cursor over the name of the second photo tab, this same photo is activated and displayed in the Photoshop working window. All that remains is to drag the cursor from the title to the photo itself. Notice how the cursor appearance has changed:

    Now you can release the left mouse button. The photo with the couple has moved to the photo with roses!

    Note. If you want the photo being moved to be placed exactly in the center of the target photo after moving, before starting the moving actions, hold down the Shift key and release it only after completing the actions.

    Here I just placed the photo on the right side of the target:

    So, we looked at two ways to combine images open in Photoshop tabs.

    Read more: