• Update for 8306. Tricolor TV receiver firmware for free viewing

    It is natural that the Tricolor TV company is trying in every possible way to improve its services, which is why updates appear frequently. If you miss the release of new products and do not update your devices, then various difficulties associated with displaying channels and more are possible. You can avoid them with the help of technical updates of such popular models receivers like GS 8306 or GS 8307.

    How to update the receiver firmware

    Updating the GS 8307 or GS 8306 receiver software is a replacement old firmware on updated version, which meets the requirements of 2017. Updates from the past, 2016, are still relevant, but not for long. Please check the firmware version installed on your device; it may already be outdated at this point.

    For example, let's take the popular Tricolor TV GS receivers, namely GS 8307. The software version that must be installed on this device is 1.9.160. It was released in the last months of 2016, so it continues to operate this quarter. But there is every reason to expect that another new product will soon be released, which will have to be urgently installed in order to keep the receiver working.

    It is not recommended to ignore updates, although no one forces you to use them. It’s just that as soon as the program is updated, the receiver, in theory, should work better. But for inexperienced user It will be useful to know that when updating software, you should follow the following important rules:

    • At the moment when a new one is installed software you cannot turn off the set-top box, otherwise interrupting this process will cause serious damage;
    • The GS 8307 software should be updated in two stages. But human participation is exclusively accompanying, since the entire procedure takes place in automatic mode, and the most a person can do is press the remote control keys several times;
    • The time you need to spend updating the receiver is at least twenty minutes. But a lot depends on the model of the device and how correctly the procedure is carried out;
    • Whatever happens technical errors, and the receiver continued to work perfectly, you need to strictly follow the instructions, which will definitely be visible on the TV screen.


    Step-by-step procedure for updating Tricolor TV 8306

    In recent years, Tricolor television has been considered one of the most popular among its analogues. But a significant disadvantage of this operator is the fact that it is necessary to frequently update the system. Of course, this point can only be called a minus with a big stretch, but, in truth, the need to constantly monitor updates so as not to lose your favorite channel suits few people.

    Instructions for updating the receiver firmware look like this:

    • You need to search for channels through manual control. To do this, find the corresponding item in the menu and click it;
    • When the previous step is completed, you need to unplug the power cable from the network so that the receiver turns off, and, after waiting a few seconds (up to a minute), turn it back on;
    • On the receiver, turn on the information channel under number “333”;
    • If the menu works as it should, a notification will appear on the screen saying that a new firmware version has appeared on the company’s website, and the user can update his device;
    • If you are interested in the offer, you can accept the update by pressing on the remote control remote control confirmation of actions;
    • The next step is to monitor the update process in the automatic window and perform simple manipulations that will help speed up the completion of the procedure;
    • At the end of the first stage there will be automatic reboot receiver, so there is no need to be scared - this is only a transitional stage for the next part of the updates;
    • When the second stage of the update is completed, a message will appear. Next, you need to set the parameters, language, date and time;
    • If everything is correct, you need to search for TV channels again, after which the 8306 Tricolor receiver will be almost ready for use.

    When all the necessary manipulations have been completed, the user needs to go to the “Setup Wizard” section to make sure that the software version has changed to a more modern one. The new firmware has a lot of nice bonuses, in particular, it is distinguished by a new graphical interface Stingray software, which, judging by the comments, was liked by many.

    Problems after flashing

    Unfortunately, even the best and most modern firmware is not a panacea for problems that can affect the receiver where it is installed. The software is still “raw” because it appeared not so long ago and the developers did not have time to remove errors. So it turns out that for some users everything works fine, while for others it’s the other way around.

    In the latter case, the problem can be solved. For example, by restarting the update again or using a flash drive rather than installing programs over the network. But if there are errors of a technical nature and they appeared after the firmware, then it is better to return to the old parameters until the Tricolor company corrects the errors that caused the trouble.

    If you go to old version firmware does not work due to technical points, then you need to go to service center, otherwise the equipment may be damaged. In principle, even after updating the receiver with low-quality firmware, you can correct the situation by waiting until a higher-quality sample comes out and flashing the device again. The errors are not too serious, so the wait will be associated with a minimum of inconvenience.

    GS 8306 upgrade from USB to new version 1.9.160, beginning

    GS 8306 has waited its turn and we are updating it via USB. For this we have a new software version 1.9.160. Let's see what difficulties there may be during pouring. Because unfortunately updates on the operator's receivers lately don't go very smoothly.

    GS 8306 version p.o. 1.9.160

    GS 8306 update process

    2. The receiver begins the update process. The entire button is lit, but there is no image on the screen! It is impossible to check the update process on the screen; both receiver outputs do not work!

    GS 8306 version p.o. 1.9.160, upper diode.

    3. One diode of the receiver lights up constantly, the second blinks occasionally. This is all normal, the main thing is not to turn off the receiver from the network! If you turn off the power now, the receiver will fly far and long!

    GS 8306 version p.o. 1.9.160, the update process is complete.

    4. After the receiver has loaded everything, both diodes will go off! We wait at least 10 seconds. If you turn it off earlier, the receiver will be damaged! Of course, it’s scary, but that’s how everything is done here….

    GS8306 p.o. 1.9.160 switching on.

    5. After everything has been updated, turn off the receiver from the network. We remove the flash drive from the USB. Turn on the receiver and configure all programs.

    GS8306 version p.o. 1.9.160 status check.

    That's all, we have updated our receiver, now we can watch television programs. The main thing to remember is that during the update our receiver may break and this is not a joke. The majority of users will not be able to repair the receiver themselves.

    If you still have doubts about how to update, watch the video. In this video, the entire update takes place in real time.

    Let's add another video about this firmware.

    Deterioration in signal quality or incorrect setting of Tricolor TV channels may indicate that the receiver software version is outdated. To eliminate control errors, get rid of operational problems and even expand the range of capabilities of the Tricolor TV GS-8306 receiver, you need to update the software. You can cope with this task without contacting a specialist; it will take about a third of an hour, a little knowledge of how to flash the equipment you have at home, and its subsequent configuration.

    Preparing for a software update

    Before flashing the receiver, you need to make sure that the device reliably receives the signal. Due to the fact that the software will be installed directly via satellite, any technical failure could be fatal for the receiver. For the same reason it is necessary to ensure uninterruptible power supply , otherwise it may not turn on the next time you start it.

    If you are outside the city in windy weather, a thunderstorm, or during a given period of time there are periodic power outages, then it is better not to risk it and postpone the procedure for a while.

    How to reflash the receiver yourself

    The firmware will take you about 20 minutes, but at this time you should not neglect the instructions and turn off the receiver or TV. The sequence of actions is as follows:


    If in doubt own strength are present, as well as fears that the set-top box may no longer turn on due to an interruption in the data loading process, it is better to contact a service center.

    The company’s specialists can not only reflash the receiver, but also produce equipment diagnostics. In this case, it is worth finding out in advance about the cost of the services provided and the timing of their implementation.

    What will the new firmware version change?

    The processes of information exchange and improvement of communication channels do not stand still. In order to improve picture quality and sound quality, developers are working tirelessly to create new software environment. Although the devices in users' homes will remain old, timely update software is capable expand functionality and make an interface satellite set-top box more simple and convenient.

    Do not forget that a new version of the software for the GS-8306 Tricolor TV model is planned for 2017. This means you can’t miss the opportunity to have it in your home or dacha. satellite television improved quality.

    Opportunities will open up before you:

    • sorting films by alphabet, genre and show time;
    • reading descriptions of films and TV series that interest you;
    • setting a timer to turn on selected viewing sessions.

    Summing up

    Now you know exactly how to update the software of your Tricolor GS-8006 receiver . Detailed instructions will certainly help you maintain correct operation equipment throughout its entire service life and do not waste money on specialist assistance. In addition, it becomes possible, without changing the device, to expand the functionality of the set-top box and change the interface, which becomes more intuitive, understandable and attractive with each new version.

    With the advent of the Internet modern man does not experience information “hunger”. It's easy enough to find the information you so desperately need. However, when reading any instructions, it is important to understand that any deviation from the prescribed requirements is fraught with serious consequences.

    When purchasing a new GS 8306 receiver, owners often want to know how to reflash the Tricolor GS 8306 receiver. This desire is really justified, since the firmware allows you to ensure stability in further work receiver in HDMI mode.

    Any user can reflash the GS-8306, the main thing is to strictly follow the instructions and do everything correctly

    We can even confidently say that the GS 8306 firmware allows you to successfully cure the receiver from glitches.

    Firmware process

    Experienced users and experts emphasize to all interested parties that without certain skills related to software updating, you can unknowingly make fatal mistakes.

    Why is new firmware needed?

    When carrying out any actions, it is very important to understand how important they are, and whether it is possible to do without them in any way. The flurry of people wanting to know how to flash GS 8306 from a flash drive is explained by the fact that new firmware gives the receiver several advantages.

    First of all, the device acquires a modernized menu for selecting the desired operator. Also, the “Status” menu after the firmware is accompanied by an updated interface, which makes it easier to work with the menu.

    Also welcomed by many is the fact that after the firmware the receiver is characterized by significantly improved performance. Such important manipulations make it possible to display an information block that contains important information regarding payment methods for Tricolor TV services.

    The acquired characteristic is especially welcome, allowing you to remember in standby mode the settings that were defined on the receiver before it was disconnected from the power supply.

    Firmware installation instructions

    If you carefully examine the design of the receiver, you can make sure that the device does not have an RS-232 (COM) port. However, in return, its receiver has a service USB. It is thanks to its presence that the device undergoes flashing.

    For such manipulations, the owner of the receiver should prepare an ordinary flash drive. Naturally, you should take care in advance of downloading the firmware file itself, which can be downloaded on the Internet on specialized forums focused on issues of Tricolor receivers.

    After downloading the proposed file, unzip it into the folder you created previously. Then find the firmware itself in it: ssu_gsc_stb.upg.

    Initially, format the flash drive that you prepared in advance. Before formatting, the system will ask you which file system you want to install on it, check FAT32. Copy the startup firmware file and paste it onto the USB flash drive.

    Now all that remains is to connect the flash drive to the receiver by inserting it into the USB connector. The receiver must be turned on during this procedure.

    With the flash drive inserted, first turn off the receiver and then immediately turn it on. This is not difficult to do if you press the “Stand by” button, which is located on the front panel of the receiver.

    After restart receiver, the firmware process starts and is carried out automatically. The user can verify that the firmware is actually being installed by the information that appears on the TV screen.

    At this moment, you should sit near the screen and do any other things, but not interfere in any way with the ongoing process. When he reaches the finish line, information will appear on the screen indicating the successful completion of the process.

    Digital Satellite HD Receiver

    IMPORTANT!!! The Stingray firmware for this receiver model with a weak processor is very unstable - possible problems:

    • loss of picture and sound
    • flickering when turning on electrical appliances and lights
    • Freezing and slow channel switching
    • spontaneous reset to factory settings when power is turned off
    • loss of signal from the antenna

    It will not be possible to return the previous version of the software via USB. PS (Only by unsoldering the flash memory and flashing it in the programmer)

    Before updating, read the instructions in the archive.

    Unofficial software:

    Compared to previous software versions:

    • The operator selection menu has been modernized.
    • Implemented new interface“Status” menu, which simplifies working with this menu.
    • Improved general work receiver
    • An information block has appeared containing a description of the main methods of payment for Tricolor TV services.

    Based on comments from user vale9041 from the forum http://www.telesputnik.ru

    It is now possible to remember the receiver settings through standby mode, even if it was disconnected from the power supply.

    The procedure is as follows:

    If you have just created favorites and turned off the receiver with the power cord, then turned it on again, the receiver will switch to the tricolor channel, return button with two circular arrows (the so-called LAST) we will find ourselves on the first channel created in the favorite.

    If, when viewing a favorite, we switch the receiver to standby mode from the remote control, then turn it on again, then later, when you disconnect the receiver from the network with a cord and turn it back on, the return button will return it to the favorites of the channel in which you switched it to standby mode from the remote control. That is, the standby mode serves as memorization.

    The same can be done with the volume... If you set the volume to maximum and switch the res to standby mode, then the next time you turn on the res will be maximum volume. But this is provided that in the future you will turn off the power supply with a cord from the outlet.

    you can do the same so that the receiver remembers general list channels in one column or three columns wide (view)...that is, the standby mode is remembering what we want...

    Past releases

    Compared to previous version GS8306 receiver software / GS8305, the following changes have been made to version 1.0.49:

    • Improved algorithm automatic search channels "Tricolor TV".
    • The ability to delete the list of TV channels and radio channels that are generated by default in the “All TV” and “All Radio” lists has been removed.
    • At initial setup channel number “0” is displayed.
    • The indication of button presses in StandBy mode has been removed.
    • When you first switch to the list of radio channels, the receiver turns on radio channel number “0”.
    • EPG operation optimized
    • Implemented work with right polarization.
    • TV Mail service. The “Delete mail” button has been renamed to “Delete mail”.
    • List of channels. The "Width" function button has been renamed to "View".
    • Fixed incorrect message in HDMI mode “Volume scale timeout”. In version 1.0.049, the inscription looks like: “Volume scale display time.”
    • Confirmation dialogs are implemented from left to right (“YES” - “NO”, default cursor is on “NO”).
    • Improved operation of the Tricolor TV Cinemas service
    • Improved compatibility of the receiver with TVs when connected to them via HDMI interface

    Receiver firmware via USB service port

    GS-8306 does not have an RS-232 (COM) port, but has a service USB, through which it is flashed. For firmware we need regular USB flash drive, and latest version firmware file for the GS-8306 receiver which you can download higher .

    You can check which version of receiver software you have installed in the Main Menu

    DRE Info>Status


    Firmware order:

    1. File ssu_gsc_stb.upg copy to USB flash without renaming.

    2. Insert the USB flash into the receiver and reboot the receiver using power, this can be done by pressing a button "stand by" on the front panel of the receiver. As soon as the power is turned on, the firmware process will begin, this will be indicated by a corresponding message on the TV screen.

    Now all that remains is to wait for the process to complete. When the firmware is completed, a message indicating successful firmware will appear on the TV screen.


    3. After the permission message appears on USB removal flash on the TV screen, remove the USB flash.

    IMPORTANT! It is not recommended to remove the USB flash before the corresponding permission message appears on the TV screen, otherwise the receiver will be damaged.

    Rollback to earlier version is not possible, you can replace the software in the receiver with either current version, or to a newer one.

    If the firmware does not work, then:

    We format the flash drive in FAT or FAT32 using any utility, for example from HP for flash drives, but not in Windows, like right-clicking on the flash drive and the format may not help.

    We upload the file to the flash drive.

    We insert it into the switched-on receiver, wait for less than a minute and turn it off with the button on the device, you can immediately turn it on with the same button.

    After 10 seconds, maximum 30, a message will appear indicating that the firmware is being updated.

    If the message does not appear and the standby indicator starts to flicker, then the firmware has not started.

    Software update for GS 8305 and GS 8306 receivers via satellite

    On March 11, 2013, a software update for the GS8305 and GS8306 receivers will be launched from EutelsatW4/W7 (36A/36B) satellites, aimed at improving and improving the performance of this receiving equipment. Tricolor TV subscribers will be able to update the receiver software at any time from March 11 to April 8, 2013.

    Before starting the update, write down the current software version by going to “Menu” -> « DRE Info" -> "Status". Once the update is complete, the receiver software version should change to 1.1.001 . New software will be downloaded from the air.

    ATTENTION! Do not turn off the receiver's power until the update procedure is complete! Otherwise, the receiver may fail!

    To update the receiver software, follow these steps:

    1. Unplug the receiver's power cord from the outlet, and then plug the receiver back in.

    2. Switch the receiver to the Infochannel Tricolor TV channel.

    3. After a few seconds, the following message will appear on the screen indicating the need to update the receiver software:

    When of this message select the “YES” option and press the “OK” button on the remote control.

    Attention! If a message about the need to update the software does not appear on the TV screen within 5 minutes, you need to reset the receiver settings to factory settings (“Menu” - “Settings” - “Factory settings” - “OK”).

    4. After agreeing to the update, service messages about the process of updating the receiver software will begin to appear on the screen. The type of messages is shown below. The software update takes about five minutes.

    Attention! During the software update, do not turn off the power to the receiver! Otherwise, the receiver may fail!

    5. Once the software update is complete, the receiver will reboot and turn on in the “Setup Wizard” mode.

    6. At the first step of the “Setup Wizard” you will be asked to select the menu language and operator. You must select “Tricolor TV Center”, only after that you can proceed to the next step.

    7. After finishing the search for Tricolor TV TV and radio channels, you need to make sure that the receiver software version has changed to 1.1.001 . To do this, go to « Menu" -> « DREInfo" -> "Status" and check the value in the third line. If the receiver software version has not changed, you need to turn off and turn on the receiver on the Infochannel Tricolor TV channel and repeat the update procedure.

    8. At this point, the software update of the receiver and module is completed, your receiver is ready for further work.

    You can watch a training video about updating the software on the training channel “Teleinstructor” and in the “Video Instructions” section on the Tricolor TV website.

    Description of the new software version:

    New software is designed to increase the level of security receiving equipment and ensure the stability of its operation, as well as make it easy to use when watching TV channels and using additional services"Tricolor TV" is more convenient.

    New functionality has been added to the software in the interface of the Tricolor TV Cinemas package. Some buttons have received additional features, for example, pressing the Red button brings up a description of the selected film, Green - options for sorting the list of films (alphabetically, by genre, by upcoming shows, by newness in the schedule), Yellow - a list of films for which the timer was set, Blue - a list films that will be available for viewing the next time the repertoire is updated.

    For the convenience of subscribers, the “Status” menu has been redesigned. After the update, the subscriber will have two options for displaying information:

    Brief (contains the most frequently used data, including information about the ID number) - displayed when you go to the “Status” menu item;

    Advanced (contains all information about the receiver) - called by pressing the Red button (“F1” or “i”) on the remote control while in the “Status” menu.

    Frequently asked questions:

    Question: Why do I need to update the software?

    Answer: The new software version for the GS8305 and GS8306 receivers features new, more user-friendly interface package "Cinemas "Tricolor TV", the "Status" menu has been redesigned, and changes have been made to system settings receiver, which increases the stability of its operation.

    Question: Why information window“Status” began to look different? Where did some of the items that were there before go?

    Answer: For the convenience of subscribers, the “Status” menu has been redesigned. Now you have two options for displaying information: short (contains the most frequently used data, including information about the ID number) and extended (contains all information about the receiver).

    Question: Why have the functional buttons changed in the interface of the Tricolor TV Cinemas package?

    Answer: The new version of the software has implemented additional features interface of the Tricolor TV Cinemas package. Now, by pressing the Red button, you can read the description of the selected movie, Green - select one of possible options sorting the list of films (alphabetically, by genre, by upcoming shows, by newness in the schedule), Yellow - to see the list of films for which the timer was set, Blue - to see the list of films that will be available for viewing the next time the repertoire of the "Cinema Halls" package is updated "Tricolor TV". Also in the new version of the software, it is possible to display the interface of the “Tricolor TV Cinemas” package when you click on the “Order a movie” or “Split File” button when watching/listening to any television or radio channel, and not just, as was previously the case , when watching the TV channel "TV.Poisk".

    Read more: