Why does mms take so long to be sent? How to open an MMS message on your phone

In the vast majority of cases, during installation new SIM card the smartphone automatically receives MMS settings and mobile internet. But sometimes glitches can occur, resulting in the user having to manually set required parameters. In this article we will tell you how to set up MMS on Android.

To open MMS settings, you must perform the following steps:

Step 1. Launch the application Settings and select the section " SIM cards and mobile networks».

Step 2. Select SIM card, for which you need to configure MMC.

Step 3. Click the button Access points».

Step 4. Select an access point for MMS and in the next window, set the parameters necessary for correct reception and sending multimedia messages.

MMS access point settings vary depending on different operators mobile communications. To save your time, we have collected links to the appropriate MMS settings for gadgets under Android control largest providers in Russia and neighboring countries:

How to send MMS from Android

Previously (on push-button phones), to send an MMS, you had to select the appropriate option in the message menu. IN modern smartphones everything is much simpler: just attach, for example, a photo to a text message so that it is automatically converted into multimedia. This also works in reverse side– by deleting all multimedia files from the created MMS, you will turn it into an SMS message.

Conclusion

Setting up MMS on Android is very simple - just use this guide - and in a couple of minutes you will be able to send and receive multimedia messages on your smartphone.

Today, to send media files, many users prefer to use email, social networks, communication applications. However, there are still adherents old model sending photos and pictures using the MMS system. Setting up a smartphone is not fundamentally different from the method of setting up previous generation phones. Let's look at how to set up mms on Android using all available methods.

First of all, it is recommended to call your telecom operator and make sure that this service is active for the specified number. Paradoxically, numbers in some regions are deprived of the ability to send mms. Therefore, activating the MMS system will be absolutely meaningless in this case.

It is recommended to call the operator and find out all the details for your number. If the service is available (the probability of which exceeds 95%), then the most in a simple way is a request automatic settings mms. The settings are sent to the requested number, saved, after which the user can send media messages.

Contact the operator, call exact model phone, since each brand and series has personal parameters, and order the settings. In some Android models, an automatic configuration system is not provided, “thanks to” which the user will have to download the service into manual mode. This will be discussed further.

Setting up mobile Internet and MMS on the phone - algorithm:

We activate the mobile Internet through the telecom operator used. Please note that some Androids allow for the use of two SIM cards. Therefore, when activating the Internet, you must select a specific number;
Go to the smartphone menu by selecting the “settings” section;
We visit the window " wireless networks", select the item "data transfer", activate this option;
After this, we return to the “wireless networks” menu, go to mobile networks and select an access point;
In this window, you must indicate the SIM card that you will use to send and open received messages;
Click on the selected SIM card; if, after clicking, two access points do not appear in front of you (one for the Internet and one for the MMS option), then you will have to add an access point yourself.

Please note that the data entered will be personal for each operator. There is no single universal system mms settings Let's look at what access points look like for different communication providers.

How to send MMS messages from Android - operator settings:

Megafon – to receive settings you need to send a message to number 5049. You will receive an automatic package of parameters. The user needs to open and save the sent settings, and feel free to use the service. In case manual settings you need to enter the data indicated in the picture;
Beeline - to request an automatic package, you must use the number 06741015. You can also configure the mms option in the section personal account. Manual activation occurs as follows;
MTS - automatic setup is available by calling 1234. Alternative option is to use the Internet assistant to configure. Manual activation looks like this;
Tele2 - automatic setup will be available after calling the operator. Manual activation is filled out like this.

This is important: setting up MMS is quite simple, regardless of which telecom operator you use. However, please note that the average cost of one message will be 7 rubles. It's much more profitable to use modern technologies free of charge.

MMS should have lost its former popularity. But this did not happen for various reasons: firstly, not all people have access to the Internet, and secondly, sending MMS messages is much faster than in some messenger.

Advantages of MMS

MMS on Android

From the operating room Android system in most cases they support data transfer using MMS. You just need to configure it. You can change configurations on Android using automatic configuration, you can immediately contact your mobile operator, configure it manually, or order settings on the operator’s website.

Automatic MMS setup

This method very convenient because the technology will do everything itself instead of the user. The likelihood of making a mistake or damaging your mobile device is close to zero. The only negative: you can use automatic configuration only once (when you first register on the network mobile operator). How to set up MMS automatically:

Install a SIM card.
Launch mobile device and enter your PIN if required.
Receive settings in the form of SMS messages from your mobile operator.
Run the configuration and wait for the installation to complete.
You can now read sent messages.

Asking an operator for help

Unlike the previous method, you can ask the operator for help an unlimited number of times. But here the user will have to strictly follow the instructions in order to achieve a positive result. Each mobile network operator has its own toll free number technical support. You need to ask to send MMS settings to the number mobile phone:

MTS – 0890;
Megafon – 0550;
Motive – 111;
Beeline - 0611.

After ordering settings, you must accept them, and then reboot the device to start using and sending messages. It happens that the service does not connect the first time and requires additional activation. In this case, you need to call again technical support and ask to turn on the service for given number cell phone. After all manipulations, graphic messages will be activated.

Setting up MMS manually

If it is impossible to reach the operator, and MMS service is needed any minute, you will have to install it on our own. Instructions:

The next steps vary by operator. Only some columns are the same for users of Beeline, Megafon, MTS, Tele 2, Motiv. This is the “access point type” - mms and the “MMS port” - 8080 (there is an alternative code 9201 for MTS and Tele 2 subscribers). Example of settings for the mobile operator Beeline.

You can specify any username(use Latin characters). The access point is mms.beeline.ru. The login, or username, will be beeline and the password will match it (also beeline). In the MMSC column you should enter http://mms/. The IP address for this mobile operator is 192.168.094.023.

You only need to enter the specified information and leave the rest of the columns unchanged. Afterwards, you only need to save the entered data and restart your mobile device.

Order settings on the mobile operator website:

Go to the mobile operator's website.
Select the model of your cellular device from the list listed and enter your mobile phone number.
Click "send".
Over the course of some time, the phone will receive settings that will need to be installed.
Reboot your device when installation is complete.

If you are unable to achieve success, then the problem is most likely in the user’s actions or in the settings of the phone itself. If you fix the problem It’s impossible to do on your own, you should contact service center mobile operator.

Picture messages open in the same way as text ones. If the sent file is not displayed, you need to look at additional settings for receiving and sending MMS messages.

27.07.2015 17.07.2015 from wpandr_adm

Support MMS Android devices is standard, like SMS. There are still phone owners who prefer to use the multimedia messaging system rather than the usual instant messengers. They are not scared subscription fee, deterioration in picture quality. Typically, the mobile Internet and media file transfer package should be configured automatically when a SIM card is connected. But if this doesn’t happen, it’s worth spending time figuring out why file transfer isn’t working and how to set up mms on Android.

The only reason for the lack of settings may be that your SIM card has a long expiration date. Usually when you insert it into Android phone, two things happen:

an Internet access point is created;
a message transfer point is created.

Since new SIM cards contain in advance all necessary information, then they configure themselves via the GSM network. Just insert the card into your phone and turn it on.

If your SIM card was purchased a long time ago, then the Android device will not be able to independently identify itself in the operator’s network. In this case, you will have to start debugging your Android device. To do this, you can go to your nearest salon. cellular network.

Various settings

You need to create a point for sending MMS messages; to do this, you need to study the menu. First, you need to go to the phone options and find the “More” item or “Communication settings”, perhaps there will be a different name. Now you need to find the “Mobile network” item and select it. After this, the system will display a list possible settings related to mobile network, to which the SIM card is linked.

Among them you should find the line “Access points (APN)”. Using this item, an MMS transmission point will be created. Having opened the menu, you need to select “ New point access." If you see that an access point already exists, but messages with media files are still not transferred to Android, then you need to delete it and create a new one.

When creating an access point on Android device You will need to specify some parameters:

proxy;
login(username);
password;
server;
MMSC;
port;
protocol;
authentication type (optional).

Settings options for different operators

They are valid for subscribers in Moscow and the Moscow region; you can obtain information about more accurate data for your region on the website of your operator.

The required values are indicated in order according to the list of settings:

MTS Center MMS;
mms.mts.ru
proxy - not installed;
port - not specified;
login - mts;
password - mts;
server - not specified;
MMSC;
proxy - 192.168.192.192;
port - 8080;
protocol - WAP 2.0;
MCC - 250;
MNC - 01;

The settings for Beeline subscribers will be slightly different:

BeeMMS;
mms.beeline.ru;
proxy - not installed;
port - not specified;
login - beeline;
password - beeline;
server - not specified;
MMSC;
proxy - 192.168.192.192;
mms port - 8080;
protocol S - WAP 2.0;
MCC - 250;
MNC - 01;
authentication type - optional.

Automatically connects with the command *110*181#.

Settings for users of the Megafon cellular network:

Megafon MMS;
mms.mts.ru
proxy - not installed;
port - not specified;
login - mts;
password - mts;
server - not specified;
MMSC;
proxy - 10.10.10.10;
port - 8080;
protocol - WAP 2.0;
MCC - 250;
MNC - 02;
authentication type - optional.

To connect everything automatically, you can dial *105*308#.

Another popular operator Russia - Rostelecom:

Volgogsm MMS;
mms.volgogsm.ru
proxy - not installed;
port - not specified;
login - mms;
password - mms;
server - not specified;
MMSC;
proxy - 127.24.97.29;
mms port - 3130/9201;
protocol - WAP 2.0;
MCC - 250;
MNC - 02;
authentication type - optional.

The command to receive automatic settings is *107*1#.

To send mms, you need to text message add media file. It could be a picture, music or video.

Remember that MMS is much more expensive than SMS, so check your account balance before sending anything. Setting up MMS on Android is not difficult and quite fast. At the same time, it is worth paying attention to applications that allow you to send pictures and videos much cheaper.

Articles and Lifehacks

A graphic message will appear, but it is not always possible to view it. How to open mms on your phone is no longer something unknown and frightening. And why be afraid: modern users They even manage to open an MMS. Any mobile operator provides this service, sends settings to the phone, if the phone supports this function. But if the phone is monochrome, without polyphony, very old, and does not support this function, then it is unlikely that you will be able to open such message options on it.

How to set up your phone to receive mms

1. First of all, you should make sure that your phone supports GPRS/EDGE. Only in this case can receiving and sending MMS messages occur. If you are not confident in the capabilities of your phone, then the instructions for your device will help you.

2. The next step is to call your operator. During a personal conversation, ask to send you the settings on your phone, or, following the voice prompts, “alone” request them to be sent to you. For example, it is enough for Megafon to receive a message from you with the text “3” to the number 5049, MTS will receive from you empty message to number 1234 or after your call to 0876 (there will be a free call) it will send you the necessary settings for mms. Beeline provides a similar service by default to all its subscribers. However, if this does not happen, then it is enough to send a request to *110#181#.

3. You will receive a regular message on your phone containing the settings. It won’t say how to open mms on your phone, but it will ask you to save the settings and write a password for activation. Therefore, save the settings on your phone. They will automatically appear on your phone if it supports this function. After saving all the settings, turn off the device and wait a little. And turn on the phone again. If everything was correct, now it’s on your phone mms will be both opened and sent. The only thing that can get in the way is if, but that's a different story.

How to open mms

If you receive an mms, but you cannot open it, then first check the settings. Perhaps you were returning to standard settings for some reason. And everything sent by the mobile operator and saved on the phone may be lost. Therefore, ask again to send you the settings.

MMS are opened in the same way as regular messages. Their only difference is that they can contain pictures, videos, melodies or more characters. If it doesn’t open for you, check your spam settings to make sure nothing is listed there. And also make sure that you have settings for sending and receiving mms. If it seems to you that everything is in order, but the mms still does not open, then go to the nearest center with your operator, ask the center employees to help you figure it out and set everything up.