• Why is the wifi icon gray? Why is the Wi-Fi icon gray on my phone? What to do if Wi-Fi doesn't work on iPhone

    After purchasing his first Android device, the new user will immediately try to access the Internet using his device. But - that was not the case - many people have problems with the right choice Wi-Fi settings, and this cannot be done right away. In this article, I will explain the entire process of setting up Wi-Fi on Android in as much detail as possible.

    Let's assume you already have operating network Wi-Fi that you have organized at home (for this you will need a special device - a router) and you plan to connect a device running Android 4.0 and higher to this wireless network. The entire process is described in as much detail as possible, every step, even the most insignificant, will be explained to the smallest detail.

    • So, first you need to enable the Wi-Fi signal receiver on your device. This is done as normal system menu: "Menu" -> "Settings" -> " Wireless networks" -> "Wi-Fi". You can also turn on Wi-Fi using a standard widget if you have placed it on your desktop before.

    • Immediately after this turn on Wi-Fi In the system settings, a list of networks available for connection will appear on your screen. Choose any one. If you created a secure network when setting up the router, then after selecting it Android system will prompt you to enter your password in a special window. It must be said that most often, with standard Wi-Fi network parameters, further steps are simply not required! But if you have any problems, move on
    • Then you need to carry out the most interesting and, perhaps, difficult thing - setting up Wi-Fi connections. To access network settings, you need to hold down its name for a few seconds, and then select "Change settings"

    • After that, Android will show you the Wi-Fi settings panel itself. To manually set parameters such as IP address, gateway and DNS server addresses, you need to check the "Advanced" box.

    • Enter in the fields indicated above exactly the data that your Internet connection provider provided to you. If the network administrator is not you, then it is advisable to contact an experienced specialist who will help you correctly configure the router so that it “distributes” the Internet to all connected devices. I also note that Android has a function automatic detection all network parameters - DHCP. For an inexperienced user It’s better to use it, and in case of any problems, look for a solution in the advanced settings

    • After all the manipulations have been completed, you can short press on the line with the name of the network to view the settings that you have set. Other network parameters are also available in the window that appears - throughput and signal level indicator.
    • By the way, be sure to pay attention to wifi icon connections in the system status bar. If everything is configured correctly, it will not burn gray, but blue. This is very important, otherwise you will not be able to access the Internet from the device.

    That's all. In fact, the process of setting up Wi-Fi on Android is very simple and requires only a little concentration and perseverance. Installation Wi-Fi settings on Android phone is no different from the process described above, which is applicable for tablets. Good luck to you!

    Sometimes smartphones have problems connecting to the Internet via Wi-Fi. Instead of the usual blue icon Wi-Fi, displayed - gray. Browsers display the error “The connection cannot be established.”

    More likely on your Wi-Fi router the password has been changed- this is the most common case, but there are other reasons why the Wi-Fi icon on the screen turns gray. Read about it below.

    Why iconWi-Fi gray on the phone

    There are several reasons why your mobile phone a gray Wi-Fi icon is displayed, and several solutions are displayed. Let's try to talk about a few of them.

    • Possibly indicated wrong date on your phone, check if the year, month and time are set correctly. Update the time.
    • Check that the password is correct.
    • You may be having problems with hosts file. As a result, an error occurs. To fix it, find the folder system/etc/hosts. Then, click the “Rights R/W” button and edit the text. You will need to remove any suspicious lines in the text. And just resave it. You can access it only with the help of “advanced” file managers, like Ghost Commander or Root Explorer.
    • There may be viruses on your phone. Install an antivirus system, choosing the one that best suits you on your phone.

    • Absence, not so much good connection or a fully loaded server. In this case, you will need to check how well the server is working, whether there are any problems with its operation, and whether the connection is working well. The easiest way to troubleshoot problems is to simply reboot the device (turn it off and on again).
    • If you finally decide and install programs such as LuckyPatcher or Freedom, just run them and in a couple of minutes the icon Wi-Fi will be back to normal and normal blue.

    If everything went well - yours Google Play will work again without interruption, and the Wi-Fi icon will return to its normal color.

    This problem often occurs when, after successfully connecting to a Wi-Fi network, the connection icon on your smartphone or Android tablet gray. And it should be blue.

    Everything seems to be fine, but the gray icon means you need to sign in to your Google Play account. After entering personal data (login and password) into Google account An error appears stating that it is impossible to connect to the server. And on the phone or Google tablet Play is needed to download a program or game.

    Users note that when they try to connect the tablet to a Wi-Fi network, a gray icon appears. Then the user tries to log into Google Play, indicates the login and password in the previously created Google account, but the system displays a message indicating that it is impossible to log in. Some people click Next. This opens the settings page for connecting to Wi-Fi networks. There you can see that the icon with the level Wi-Fi signal appears gray instead of blue. At the same time, all sites open normally in the browser, but Google Play does not work.

    I read somewhere that this problem sometimes occurs due to incorrect setting time and date. It seems like such a small thing. I decided to find out for myself. I go into the settings and see that the time is shown correctly, but the date is not. The year is set correctly, but the day and month are incorrect. After I changed this data to the current date, the Wi-Fi icon turned blue and Google Play started working. Some Android users experience problems logging into the Google Play Market after installing the Freedom application. Therefore, delete it if you have not already done so.

    What to do if the Wi-Fi icon is gray on your phone or tablet and you can’t log into Google Play?

    Time and date settings may vary depending on the Android OS version and your device manufacturer. However, in any case, the date and time are set in the settings. Enter the panel where the clock, battery charge, and other information are located. Select "Settings". Then go to the "Date and Time" tab and check the settings. Be sure to post correct date and time, including time zone. After exhibiting correct settings the icon turns blue. I immediately opened Google Play and downloaded several games.

    This is a simple solution to an unusual problem.

    Question from a user

    Good afternoon.

    Tell me what can be done - a yellow exclamation mark often appears on my laptop, indicating Wi-Fi without access to the Internet.

    After a while it disappears, but constantly waiting for the network gets boring. I'm thinking of buying a cable to connect the laptop to the router directly (but then there will be no mobility) ...

    Alexandra.

    Good afternoon everyone.

    The described problem with accessing the Internet via Wi-Fi is not that uncommon (I think that most Wi-Fi users We have encountered it more than once, and will encounter it again...). It occurs for many reasons, and I will analyze the most basic of them in this article (so to speak, I will give recommendations for restoring the network). So...

    How to restore Internet access via Wi-Fi

    The appearance of the error is shown in the screenshot below - the Wi-Fi icon in the tray lights up yellow exclamation mark, if you move the mouse pointer over it, you will see a characteristic message. Also, users often find out that something is wrong with the network when they try to open some web page - and instead they see a message in the browser that the resource is unavailable (and this happens with all sites).

    An example of an error: when you hover over the Wi-Fi icon, Windows reports that the connection is without Internet access...

    Now about the decision...

    Try rebooting your router and laptop

    Oh... For many problems with your computer, it is recommended to restart it. And this time is no exception either (this error often occurs after the computer wakes up from sleep mode (hibernation). The fact is that after waking up from hibernation, Windows “thinks” that it is working with the old IP address, but the router has already given it a new one - and in As a result of this lack of agreement, connection problems are observed) ...

    To reboot the router, you can use a special button on the device’s case, or simply disconnect its power supply from the network for a while.

    I note that with many connection problems, this is forced reboot Helps quickly restore network functionality...

    Important!

    By the way, I highly recommend checking whether there is Internet on other devices using this Wi-Fi network - on a tablet, phone, etc. This will help you understand whether the problem is in the laptop (with Windows), or a problem with the router or provider.

    Diagnose problems

    Windows (at least 10) has very smart network diagnostics, which many people underestimate. Meanwhile, by running it, you can correct the lion's share of errors, and at least roughly know “where to dig”...

    And so, right-click on the Wi-Fi connection icon and select (see screenshot below).

    Next, the wizard will start: it will automatically check all the parameters, correct errors, restart the adapter (if necessary), and at the end of its work it will give you a message: that everything is in order and I have fixed the network, or indicate some kind of problem.

    For example, in my case, the diagnostic result is “The DNS server is not responding.” Similar error occurs most often when there are problems with your Internet provider, or there is a communication channel break. For example, if you cut the network cable at the entrance (or simply remove the Internet cable from your router), you will see the same error...

    Remark!

    The article will tell you what to do if DNS servers do not respond (Internet failure and sites do not open) -

    Check what's wrong with yours network cable Everything is fine

    This advice follows from the previous point. First, take a look at the router itself: if everything is in order with it, one way or another, the LEDs on it should be lit and blinking (try disconnecting the Internet cable from the router, and then connecting it again - the number of lit/blinking LEDs should change, provided that everything is in order with the network cable) .

    In addition, check the Internet cable from your PC to the entrance area. It is not at all uncommon for the cable to be chewed by pets or local “ghouls” to cut the cable in the entrance.

    Is there a problem with your Internet provider?

    Many users are in no hurry to call the provider, meanwhile, at the other end they can very quickly tell you whether everything is in order (which means you can quickly figure out whether it’s worth continuing to look for problems at home).

    By the way, problems on the provider’s side are not that uncommon. You can find out about major interruptions on the provider's forums (or official websites. By the way, in these cases it is difficult to reach him by phone - they usually hang up).

    Also, the provider may change the settings, forgetting to notify you (or you ignored the notification).

    Try to register Google DNS or Yandex. Check your settings network connection.

    Often, when the Internet is not available due to a failure of the DNS servers (in this case, most often, applications such as Skype, torrents, etc. work, but the pages do not open in the browser).

    In this case, try to write DNS servers from Google or Yandex. Their stability will be higher than the DNS of many providers in our country, which means access to the Internet will be more stable...

    To register DNS, you need to open properties wireless connection. I'll look at it in order...

    First you need to open a list of all network connections on your PC. To do this you need:

    • press Win+R;
    • enter ncpa.cpl ;
    • press Enter.

    How to view network connections in Windows 7/8/10

    By the way, you may have more than one connection (as in my case), but several (you need to select the wireless option, if the English name is "Wireless...") .

    After that, open properties "IP version 4 (TCP/IPv4)" . See screenshot below.

    Next, you need to move one slider to the “Obtain an IP address automatically” mode (check this network connection setting!); the other one, related to DNS, is set to the “Use the following DNS server addresses” mode - and register DNS from Google 8.8.8.8 and 8.8.4.4 (or from Yandex 77.88.8.8). See the screenshot below.

    Save the settings and check the network functionality.

    Check your router settings

    Wi-Fi without an Internet connection often occurs due to a faulty router settings. Or, alternatively, your Internet service provider may have changed the settings required to access the network. For example, not long ago I was faced with the fact that my provider changed the login for accessing the Internet via the PPPoE protocol (the sad thing is that no one notified about this... Therefore, in the previous steps, I recommended asking the provider if everything is okay...) .

    In general, setting up a router is a separate and large topic. Therefore, in this step I will provide a couple of links to my articles on this topic. I recommend checking it out.

    How to connect and configure new wifi router yourself - instructions with pictures -

    How to enter the router settings, and what to do if the settings do not open -

    Test your network without antivirus or firewall

    Well, the last thing I recommend is to temporarily disable your antivirus and firewall. This, of course, happens infrequently, but still, it happens that for security reasons and care for the user, they block the network (especially, I was guilty of this before Norton antivirus IS when set maximum level protection. Apparently, they restricted the user from everything where it was hypothetically possible to pick up an infected file).

    Most modern antiviruses can be disabled via their tray icon. For example, with Avast antivirus- this is done simply: just select the item "Manage Avast Screens" - and then specify the time for which the antivirus will be disabled. Everything is simple and fast...

    For shutdown built into Windows firewall, go to get started control Panel . Next you need to open the section " System and security" , then "Firewall" Windows Defender" (see screenshot below).

    Then click on the menu on the left "Turn the firewall on or off...".

    Set all sliders to mode and save the settings.

    After checking and setting up the Wi-Fi connection, it is recommended to turn on both the antivirus and firewall (and adjust them accordingly if they were causing the instability Wi-Fi work. For example, you can reduce the level of security they provide from maximum to medium) .

    Additions on the topic are welcome (constructive criticism too).

    In rare cases, setting up a Wi-Fi network on an iPhone, iPad, or iPod touch may be inactive or grayed out. If you go to the Settings -> Wi-Fi menu, the toggle switch will be turned off without the ability to activate the wireless connection.

    If this happens, the iOS device does not allow you to use the Wi-Fi interface. In the operating room iOS system 7.1 the message “Wi-Fi unavailable” may appear in Control Center. How to solve unpleasant problem? First of all, check that the Airplane Mode toggle switch is in the Off position by going to the main iPhone section and iPad. After this:

    1. Install the latest version of iOS

    The first thing to do in such a situation is to check that the device has current version operating system. With each update, Apple eliminates system errors, makes the OS more stable. After upgrading to the latest OS, the problem may resolve itself. Go to the Settings menu -> General -> Update. Here you should see the message “The latest software has been installed.” If your device does not have access to the Internet, connect the gadget to your computer and check for updates in iTunes.

    2. Do a hard reset

    Solve the problem with inactive Wi-Fi indicator will help hard reboot device, which resets temporary data. To do Hard Reset, you need to press and hold at the same time top button"Power" and "Home" button. You need to hold them together until the Apple logo appears on the display.

    3. Reset network settings

    In a situation where Wi-Fi setup displayed in gray, a reset may result network settings. The operation is quite simple and can be done on the gadget itself. Follow the procedure from the Reset section in the iOS main menu. To do this, go to Settings -> General -> Reset -> Reset network settings. This way you will “reset” all network settings, including information about connected Bluetooth devices, Wi-Fi passwords, as well as VPN and APN settings.

    4. Full iOS recovery

    If resetting network settings did not help, you need to perform an operation to return your iPhone and iPad to original state– reset operating system. Perform Cleanup mobile device You can use iTunes or the OS itself. In the latter case, you need to go to the Settings -> General -> Reset menu. There are different options available here for “resetting” the system. You can find out more about this.

    5. Repair

    If none of the above methods help, it is probably a problem. hardware failure. Most likely the problem is with the Wi-Fi module. To determine the specific problem, you must contact your representatives. Apple for support and maintenance or to your nearest service center, where specialists will diagnose and repair the device.

    Read more: