• I have set a password for the router now. How to easily set a password for your home Wi-Fi network. How to protect your home Wi-Fi network with a password

    A home wireless network is quite convenient. But if you don’t set a password for Wi-Fi, then not only you, but also half of your neighbors will use the Internet. Setting up a secure connection is a simple process that will help you avoid various problems. In this article we will look at how to create a password and configure secure connection on the router, connect the PC to the network, let's understand the differences between security certificates and encryption types.

    Choosing a new Wi-Fi password

    What can be difficult about choosing a password that cannot be guessed? strangers? However, often owners of a wireless connection have an encrypted network with standard combinations of numbers such as “12345678” or “87654321”.

    For the password, it is recommended to use a combination of upper and lowercase letters of the Russian or Latin alphabet, numbers and symbols. It should not contain names or significant dates, simple words, repeated letters or numbers, symbols located side by side on the keyboard. For the convenience of further password entry on smartphones, tablets and other devices, it is not recommended to use No., %, @, & and other atypical characters. You can find a password generator online that will help you choose the required combination. You just need to mark the number of characters and click on the “Create password” button.

    It is advisable to set a password for Wi-Fi immediately, when setting up the router. It would also be a good idea to change it from time to time. In addition, change the password of the router itself so that no one can enter the settings and change them.

    Setting a password in the router settings

    1. Go into your router's settings. You can use the software that comes with the router itself or open the settings remotely via the Internet.
    2. It is advisable to access the router settings from the device that is connected to it via cable. If you have a wireless connection, then any changes will disconnect you from the network, and for further work you will have to re-open the device interface.
    3. In the browser window, enter “192.168.1.1” in the address bar. Also, the ending of this combination can be “0.1” or “2.1”. Then press "Enter".
    4. In order to open the router settings, enter your username and password in the window that opens. For most models they are “admin” by default.
    5. If you've already changed your password and now can't remember it, reset your device to factory settings. To do this, press the “Reset” button on the router. This will remove all non-factory settings.
    6. Find "Protection" in settings wireless mode" Although on different devices this name may be slightly different. For example, it might be called “Security Settings” or “Network Security Properties”.
    7. Set the encryption version and type. Basically, these devices offer WEP, WPA-PSK or WPA2-PSK. If possible, choose the latter option. Although older router models may not even offer it. And outdated laptops or phones do not always support it.
    8. WPA2 matched type AES encryption. On at the moment this is the best of existing standards. The second option that the router can offer is TKPI. It is much older and less reliable.
    9. In the specified field, enter the password that the router will request when new clients connect to it. Click the "Save" button.
    10. Reboot your device. If it does not reboot automatically for 10 seconds, unplug it and then plug it back in. For each manufacturer, the reset button may be located in different sections of the menu. But usually it is located in “System Tools”.

    Setting a password in Windows

    To connect to a wireless network on a computer or laptop, you also need to enter a password that will match the one set on the router.

    1. Open “Network and Sharing Center” on your PC or laptop. shared access" You can do this through the Start menu and the control panel, or you can call it by clicking directly on the Internet connection icon.
    2. In the window that opens, select “Wireless network connection.”
    3. A window will open in front of you, in which you need to find the “Wireless Network Properties” button.
    4. In the next window, select the “Security” tab and enter the previously created password in the “Network Key” line.
    5. Set new settings by clicking on the “OK” button.

    Using third party software

    The Wi-Fi password can only be set using software, developed by the device manufacturer. Or by reflashing the gadget using third-party programs. If necessary, you can update already installed software or change the device firmware using a custom assembly or factory development. But we do not recommend changing the software settings yourself if you do not have a sufficient level of knowledge in this industry. Otherwise, you can turn a normally working device into a “brick”.

    Each third party program has its own installation and operation algorithms. But you can set a password by following the previously described instructions. The interface of most programs looks approximately the same.

    To provide access to the Internet and local networks at home, you must use routers. To protect your connection from neighbors and other passers-by, you need to use a password of this connection. In this article we will look at how to set a password on a router.

    How to configure routers

    They are mainly carried out in browsers. This can be done on any device that is connected to the Internet using this router. It is better to carry out this setting on the device that is connected to global network wire, since when this operation is carried out on equipment operating using wireless network technology, it will be disconnected when the password is changed.

    Asus setup

    We type the following in the address input line of any browser: 192.168.1.1, confirm the entry by pressing Enter. After this, you will be asked to enter your username and password. Both as one and as the other, admin is used by default. If you cannot log in, you must refer to the documentation for your router. It may also be on a sticker that is attached to the bottom of the device.

    How to set a password on an Asus router? After logging in, select Wireless in the left panel, located in the Advanced settings section. Go to the configuration section of this network. From the list, select the authentication method (WPA2-personal is the most reliable) and in the WPA-PSK key field enter the password, which may contain latin letters, special characters and numbers. Actually, this is what setting the password is all about.

    With the authentication method recommended above, the latter must be 8 characters or more. To save the settings, click on “Apply”. In case incorrect connection any devices connected to this network, you need to go into their network settings, delete this network, and then correct settings should be determined automatically.

    Setting up Tp-link

    Differences from Asus settings V in this case A little. Let's look at how to set a password on a Tp-link router. Here, to access the settings in the browser, type 192.168.0.1 or tplinklogin.net. If the latter address is used, the router must currently be disconnected from the global network.

    The login and password are the same as for the previously discussed router model. After logging in, select Wireless in the left panel from the “Network” section. Click on “Wireless Security”. We put a point near WPA-PSK/WPA2-PSK. As already noted, this method is considered one of the most reliable. We leave the encryption to AES.

    In the “PSK Password” field below, enter the password using the same characters as for “Asus”. It can contain a maximum of 63 characters, the minimum is the same. After completing these steps, you need to save the changes.

    We looked at how to set a password on a Tp-link router. To change it, you need to do the same steps.

    Setting up D-link

    How to set a password on a D-link router? Here at various models login can be done through the browser address 192.168.0.1 or 192.168.1.1. By default, the “password-login” combination is the same as for the previously reviewed brands of routers. If they do not match, look for them on the sticker attached to the bottom of this device.

    Further settings differ slightly for different models of this manufacturer. Let's look at how to set a password on the dir-300 router, the most popular model of this manufacturer. Select the Wi-Fi setting located on the left panel. Click on " Manual setting" We choose the same authentication method as for other brands. We fill in the “PSK Encryption Key” by entering a password, which must include 8 characters or more, among which there should not be Cyrillic characters. Save the changes.

    Setting up Zyxel

    This brand is quite popular in our country. In the address bar we type 192.168.1.1. Here the “login-password” combination is not the same: the login is the same as for the previously reviewed brands, and the password is 1234. If this does not work, we look for information in the documentation or on the sticker. After entering your login and password, confirm the entry by Enter or by clicking on “Login”.

    Go to “Wi-Fi Network”, select “Connection”. Here we set the network name (SSID) (it is also set in other brands of routers, usually the latter determines it automatically). It can be determined according to your taste. Save the settings by clicking on “Accept”. Next in the same section, select “Security”. We set WPA-PSK/WPA2-PSK as the authentication method. At the same time, the format network key ASCII.

    We carried out all these actions to answer the question “How to set a password on the Zixel Wi-Fi router?” To do this, in the “Network key (ASCII)” tab, enter any password typed in non-Cyrillic alphabet of 8 characters or more. The main thing is not to overdo it, otherwise you will get tired of entering large number numbers on all devices that will receive the Internet distributed by this router. Save the settings by clicking on “Accept”.

    These brands of routers have a different firmware version, which has some differences. Login is the same. The settings panel is located at the bottom. Click on the Wi-Fi icon. Go to the “Access Point” tab, enter the SSID there, which will be displayed when connecting to this network. In the “Network protection” field, select the same authentication method as for other brands. We set the password in the “Network key” field, which is set in the same type as for the other routers under consideration. Save the settings by clicking on “Apply”.

    Setting up Huawei

    Unlike the previously reviewed models of various brands of routers, Huawei are the most capricious when it comes to entering the login-password combination. So, the default router address is 192.168.100.1. Next we enter different meanings login/password to select the required:

    • telecomadmin/NWTF5x%RaK8mVbD;
    • telecomadmin/nE7jA%5m;
    • telecomadmin/admintelecom;
    • root/admin;
    • telecomadmin/NWTF5x%.

    The most common is the third option. However, users of these routers may be in for a surprise and will need to go through more than one option for this combination.

    Go to the WLAN tab. Fill in the network name, select WPA2Pre-SharedKey in the authentication method. In the field of the same name without “2”, enter the password and click on Apply. This is the answer to the question “How to set a password on a Huawei router?”

    Saving in this router is again done differently than in others. After any changes made, especially after entering/changing the password, you need to go to the System Tools tab located in the horizontal panel, then go to the left panel, where we select Configuration File and click on Save Configuration.

    In conclusion

    Thus, the answer to the question “How to set a password on the router?” Similar for many makes and models. It provides that the IP address of the device in question is entered in the address bar of the user’s favorite browser, then the “username-password” combination is entered, which is the most difficult for Huawei router. To set up a wireless network, you must select a reliable authentication method. A router password is necessary for several reasons, one of which is that you prevent unauthorized access to the device that provides Internet transmission through home equipment that you own, for which you pay. In addition, prohibiting such access provides greater speed, because it is provided by the provider to all devices.

    The topic of this article is how to set a password for a WiFi network. Such networks are widespread. Almost every home already has wireless router or modem. But the manufacturer does not install keys for connecting via wireless communication. This is done so that the buyer can freely enter the settings menu and set their values.

    It is worth noting that after purchasing and connecting to the interface for the first time, the manufacturer strongly recommends installing new key to access settings. On some router models, the user is not even given the right to choose. That is, you will definitely have to change your login and password. It is also recommended to make security settings.

    So, how to put a password on WiFi network. First, let's answer the question why this is necessary. The fact is that the access point, be it a router or wireless modem, has a fairly large range of action. This means that not only you will be able to connect to the created group.

    Very often, this is used by attackers or simply lovers of “freebies”. But if you do not have unlimited Internet (service package from your provider), then such unauthorized guests can greatly harm you. In addition, you risk losing confidential data or getting a virus on your computer. Therefore, manufacturers wireless equipment It is strongly recommended to set complex passwords.

    How to set a password on WiFi: Video

    How to encrypt your home Wi-Fi network

    So we come to the main question, how to set a password on private network WiFi. As you already know, to organize such groups, routers, modems or other devices with a wireless adapter are used. In this case, we will talk specifically about routers. All security settings are set in the router settings. So first, let's enter the device settings menu.

    We will look at how to set a password for a WiFi Internet connection using the D-LinkDIR-615 router as an example. So, we connect to the device using a cable or wirelessly. Now you need to open your browser. Enter the IP of your router in the address bar. In my case, the address is 192.168.0.1.

    It is worth noting that this IP address is used in most cases. But, sometimes you can find these - 192.168.1.1, or 192.168.2.1. As a rule, all the necessary data is indicated in the instructions for the device or on the router itself (carefully inspect the router from all sides).

    How to easily find out the IP address of a WiFi router: Video

    Press "Enter". Now the system asks you to enter your username and password. Initially, the equipment manufacturer sets the following values ​​- admin, admin, respectively. Click “Ok” and get to the settings menu.

    How can I set a password for my home Internet WiFi here? It's very simple. At the bottom of the screen you need to find and click the “Advanced settings” button. After this there will be several additional windows. We are interested in the “WiFi” section, where you should enter the security settings.

    In the window that opens, you can change only one parameter - network authentication. This is nothing more than a type of encryption. The default value is “Open”. This means that your network is not currently protected in any way. So, we need to choose the encryption type. It is recommended to install WPA-PSKWPA2-PSKmixed as this is the strongest cipher that provides high level protection.

    After this, a line will appear in which you must enter the key. In some cases, the system automatically generates a secure code and offers it. You, in turn, can leave it or change it to your own. After that, click “Apply”. That's all, now you know how to place it.

    How to connect to a WiFi router: Video

    But what if you are using a modem and not a router? How to set a password for a wireless Internet WiFi modem? Everything is extremely simple. The point is that the settings wireless router absolutely identical to the modem parameters. These devices work in a similar way. The only differences are in the names of some sections. However, the setting principle is the same.

    Just as with a router, you need to connect to the device and enter the IP address in the browser. After this, enter your login and password (admin, admin) and get to the modem menu. Find WiFi settings here and open security options. Then everything is as described above. Now you know the answer to the question of how to set a password on private WiFi net. This will increase the level of security and prevent unauthorized connections by intruders.

    If it so happens that your WiFi router provides an unsecured Internet access point, and you want your Internet to be used exclusively by you, then it will be useful to know how to set a password for WiFi router. Manufacturers such as: D-link, TP-Link, Zyxel and others. I already discussed on the blog this question in several of my articles, but this article will differ in that I will not talk about one router model (as I did for the example), but several, and to be even more precise, I will talk about the most popular router manufacturers.

    Of course, I won’t be able to cover the large circle of manufacturers that we currently have, but after reading the article, I think you will definitely have an idea of ​​how to change the WiFi password.

    In order to protect your access point with a password, you need to configure the router by going to its settings. You will need to find out the router's IP address to gain access to its control panel.

    How to find out the IP address of the router, login and password to configure it

    The easiest way to find out the IP address of your router is to carefully inspect its case. Most often, the IP address is indicated on it. It may also contain the username and password that you will need to log into the control panel. In addition, the IP address, login and password can be specified in the router manual. You can also view them on the official website of the manufacturer.

    Here's an example:

    If the described methods did not help you or for some reason turned out to be difficult to implement, then there is the most correct and exact method determining the router address. Go to Network and Sharing Center. This can be done by clicking the tray icon in the Windows taskbar and clicking on the corresponding inscription.

    Once in the Network and Sharing Center, click on “Change adapter settings” on the left, thereby opening the list available connections. Find “Local Area Connection" (if your router is connected via cable) or "Wireless Network Connection" (if you are connected to the router via a wireless connection, that is, WiFi) and right-click on the icon, select "Status "


    Then click Details. The router's IP address is indicated next to the "Default gateway IPv4" line.


    Attention! This method will help you when you can connect to your router via WiFi or cable. If you are only going to customize it, then this is not for you!

    If DHCP is not configured on the router, then read the articles I gave above. There you will find out what needs to be done.

    Now that we have found out the IP address of the wireless router, it's time to start setting it up. To do this, enter the router's IP address in the browser's address bar and press Enter. The login page for the router control panel will open, in which we will need to enter the username and password. More often these values both fields "admin". Manufacturers have options: admin and an empty password, user – user, administrator – administrator, administrator and an empty password.

    But again I want to remind you, so as not to guess, you can familiarize yourself with this information in technical documentation, which comes with the router, or carefully inspect the router at the bottom. Once you have accessed the control panel, you can now move on to the core part of our procedure, which is how to set a WiFi password.

    TP-LINK

    How to set a WiFi password in TP-LINK: on the left in the menu, find the “Wireless” section, the “Wireless Security” subsection. In the main part, select “WPA-PSK/WPA2 PSK”. In the “Wireless password” field, enter the desired password (at least 8 characters). Click the "Save" button and reboot the router.

    Now to connect to your router you will need to enter a password.

    ZyXEL

    Having gone into the control panel of the router, we find the “Wi-Fi Network” section on the left and select the “Security” subsection in it. The Wi-Fi Security Settings window appears. Opposite the “Authentication” line, select “WPA-PSK/WPA2-PSK” from the drop-down list, and opposite the “Network key (ASCII)” line, enter the password we created. Click “Apply” and reboot the router:


    D-Link

    We discussed above horizontal menus controls, and now let's look at vertical ones from D-Link manufacturers. How to set a WiFi password in D-link: having opened the control panel, click “Wi-FI” and select “Basic settings”:


    In the window that opens, set the network name (SSID) and click “Change”. This must be done if you have not used WiFi function in your router. If your router has already distributed WiFi and you just need to set a password, then go to the “Security Settings” tab.


    In this tab you just set the WiFi password. Select the encryption type “WPA2-PSK”, in the line “PSK encryption key” enter your invented password for the access point. Click “Change” and reboot the router.

    Note: in each case I told you to reboot the router after changing the password and this moment is sometimes very important so that everything goes smoothly. Sometimes, when changing settings in the router, problems occur and in order for all the changes to be applied, just in case, it is better to reboot the router. Although this is not necessary, you should be aware of it.

    It happens that you did not buy a new router in a store, but borrowed it from a friend or bought it used. In this case, the default settings of the manufacturer can be changed in the router, that is, for example, the IP address, login and password for logging into the router control panel can be changed. In this case, you need to reset the router to factory settings. How is this done?

    Routers have a button on the back panel that is pressed with a thin object, such as a pin. With the router turned on, press and hold it pressed for 6-10 seconds. After this, the IP address will again become 192.168.1.1 or 192.168.0.1, the login and password will be “admin”.

    Important! Please note that all router settings will be reset, namely provider settings, passwords, access points, IP addresses, etc... Therefore, before performing a general reset, write down or remember everything that may be useful to you.

    We have just figured out how to set a password for a Wi-Fi router. In principle, all the steps are the same: find the tab with the wireless connection settings, and then enter your password in the appropriate field. The main thing is to take your time and everything will be fine! But before setting a Wi-Fi password in the router, you can look up this password in Windows - this procedure is easier, as you don’t have to deal with IP addresses, logins and passwords. Read about this method using the links given at the beginning of the article.

    Video with an example of how you can set a password on WiFi:

    Wi-Fi is a unique technology that provides wireless network access from any device (tablet, smartphone or computer). For this access to work uninterruptedly, competent customization of the Wi-Fi network and the device that guarantees its operation - the router - is required. A router or router is a device that provides capabilities for the reliable operation of a Wi-Fi network. In order for Wi-Fi to function stably and without failures, the router must be configured correctly. Brief instructions for setting up a wireless network and equipment -.

    In the material presented to your attention, I will tell you how to set a password for a Wi-Fi router, as well as how to set a password for a Wi-Fi network so that outside users could not connect to your network and use Wi-Fi from their devices. We will talk about the ASUS RT-N12E_B1 router, since the devices of this trademark They are quite popular in the user environment, reliable, easy to configure and available on the market.

    How to set a password on an ASUS router with Wi-Fi access?

    The first thing you need to do before setting a password is to connect the computer with which you plan to configure the router to the router itself using a wire. The cord from the provider is connected to the WAN port of the device, and the double-sided PC cable is connected to the LAN port.

    When the cable is properly connected, you first need to go to the router settings configuration page, where you set the parameters for accessing the provider. To know which address to access this page, turn the device upside down and look at the bottom cover for the IP address, which can be used to get to the settings web page. The login and password used to log in by default are also indicated here.

    As you can see, the specified IP address is 192.168.1.1. You can get to the web page to configure the router using your login admin with password admin, but such authentication data is available on all Wi-Fi configuration devices without exception, so given password It’s worth changing in any case in order to protect your router from hacking. Read about what passwords you should use.

    So, let's go to the above address. As a result, we got to the device configuration web page. We go to the “Administration” section and there we go to the “System” tab.



    As you can see, there is a “Change router password” field here. This is where we can change the password for our device by entering the updated value in the “ New password" field and confirming it in the “Re-enter new password” field.


    So, we changed the password. Now you need to apply the changes and save them to the device. Scroll the page to the very bottom and find the “Apply” button. Let's click it.


    Ready. The device will now reboot for the changes to take effect. We log in with a new password.

    How to set a Wi-Fi password on a router?

    A Wi-Fi network, like a router, needs to be administered. It is worth choosing the most optimal channel for it, installing gateways and DNS servers, and, of course, also setting a password for security. Below I will tell you how to set a password for a Wi-Fi network.

    We go to the “Wireless Network” section and remain on the first tab called “General”. In the SSID field, indicate the name of the wireless network, which will be visible in the list of networks on your device. Another quite important field is the “Authentication Method”. Here we specify the security method that will be used for your network. At home, it would be most advisable to use the “WPA2-Personal” protocol, since it provides simple procedure authentication and is also quite reliable and stable.


    The password itself is specified in the “WPA Pre-Shared Key” field. Come up with a value that will not be too easy for a cracker, and that will accommodate uppercase and uppercase letters, as well as interspersed with numbers. If it is difficult for you to choose such a key yourself, use one of the online services for randomly generating profiles, of which there are plenty on the Internet.

    How to set a Wi-Fi password on a D-Link router?

    On devices of any other models, the Wi-Fi password is set in exactly the same way. Consider the case of the D-Link router. These routers are most often used at home, along with TP-Link. This speaks of high quality device and its excellent regional adaptation for the domestic market.

    We log in using the IP address indicated on the bottom of the device. By default, as on ASUS routers, the word “admin” is used as a password and login for authentication.


    If someone has already set up your device (for example, computer wizard), it is quite possible that this pair of values ​​will not work. Under such circumstances, you need to ask the person who set up your device what password he set. If this is not possible, all parameters of the router can be reset by pressing the RESET button on the rear panel of the device (pressing and holding for 5-10 seconds, then releasing and waiting for about a minute). If you decide to perform a reset, it is important to know that all settings will be lost, and the Internet will have to be set up from scratch.

    On different firmware The interface of D-Link routers varies greatly, but I will assume that you have firmware version 1.4.x or later. At the bottom of the configuration form, click on the “Advanced Settings” option, and then in the Wi-Fi section, click on the “Security Settings” category.


    Here, in the “PSK encryption key” field, enter the current key with which you would like to protect your Wi-Fi connection. After that, click on the “Change” button at the bottom right. Now we get to next page settings, where we will be asked to save the changes. Click “Save” and voila: you’re done.

    Good afternoon, dear readers. In this article I will tell you how to set a password on a D-Link wi-fi router. Setting a password for wireless Internet (wi-fi) is necessary primarily for security and limiting access to your Internet for other users. A wireless connection is less secure than a wired one. Therefore, if you do not have a password set for wi-fi, then anyone can access the Internet through you and also gain access to your information.

    So let's get started setting a password for a D-Lin wi-fi router. To set a password for Wi-Fi, follow these steps.

    First of all, we need to go into the settings of our router.

    Step 1 . Open a browser on your computer. In the address bar, enter 192.168.1.1 . This is the address for setting up your wi-fi router.



    Step 2 . Next enter the word admin in the field Username Password . Click Login to enter the main menu of the router.


    Step 3 . If you entered correctlyUsername password , then you will be taken to the main menu of the router. On the right side of the window Select a section WiFi by clicking the left mouse button once. In the menu that opens, click on the linkSecurity Settings


    Now almost every family has several Internet users, and in their apartment or house they connect devices to the network via a Wi-Fi router. Initially, no one thought much about how to set a password on WiFi, since there were few such devices and it was not important. Now many phones, not to mention smartphones, tablets and laptops/netbooks, have WiFi block, and everyone strives to take advantage of the free Internet. We will resist this!

    The point is not even that you feel sorry for distributing, for example, your traffic to your neighbors. The problem is that these neighbors, if they wish, can separate you from their own Internet by placing a code on the entrance, and with good knowledge of technology, they can seriously harm your computer.

    So the password for WiFi? This is not at all difficult if you have everything configured and working and only the desired code is missing. You need to start by logging in. Regardless of the router model, enter http://192.168.1.1 or 192.168.10.1 into the browser line. A window will appear requiring you to enter your username and password. If you haven't changed anything, it will be admin in both cases. We type and find ourselves in the device parameters. Now we will perform the following task: in order for it to require digital permission from everyone entering.


    The general design of the settings section may differ slightly for different models, but the system itself, the essence, remains the same. We are looking for the wireless item, one of the options for the path to it is: Inetrface setup > wireless. We are considering the English version of the menu and the absence of a book with instructions, since if there is a Russian menu, any “teapot” can set up WiFi.

    We find Authentication Type there, select, for example, wpa-psk, or another type of encryption, look for the very place where, finally, you need to enter the password. We enter it - and that’s it, the job is done. We save the settings, and now no one except people who know the code, will not connect to your internet. When deciding how to set a WiFi password, try to make sure that it cannot be guessed or hacked by anyone. Come up with a combination of numbers and letters no shorter than eight characters.


    Pay attention to the name of your network. If it is similar to others located nearby, then change it in the SSID line. If it is still difficult for you to do all of the above, then invite a specialist or contact the technical support of your provider.

    It also happens that the task of setting a password on WiFi becomes noticeably more complicated if for some reason you were unable to get into the router interface. In this case, you will have to reset all its settings. To do this, you need to press the Reset button recessed on the rear panel for a few seconds.

    Next, in the same way as described above, go to its settings. In devices produced earlier, it was necessary to manually enter all the settings, first taking them from the provider, and partly from the network settings of the computer. Modern routers allow you to access the Internet almost automatically by pressing just a couple of buttons. There are quite a few of their models, and there are also many providers, so the path to access the network may differ. You can find it out from the latter, or by typing the corresponding query in a search engine. Do not forget the password itself only after completing the connection process!

    Sometimes your Wi-Fi password may become public knowledge. Time passes, and each neighbor is already “eating” your traffic with his laptop, and the computer begins to work slower. As a result, there is only one thing left to do - set or change the password on the router. How this can be done will be discussed further.

    Using the Tuning Disc

    The first option for setting a Wi-Fi password is to use the setup disk that comes with the purchase of the router. But first you need to connect the modem to the computer using an “Ethernet” cable, and also remove the old Internet connection. To do this, go to the “Control Panel”, which is located in the “Start” menu on the right in the list, and select “Network and Sharing Center”. Next, go to the “Changes adapter settings” tab and right-click on required connection. In the menu that appears, select “Delete”.

    The next step is to launch the program from the setup disk. Wait until the diagram for connecting the router to the computer appears on the screen, and connect everything exactly as shown in the picture. If you did everything correctly and turned on the modem, a window will open that provides information about the status different indicators, and also gives the opportunity to enter the connection name and the password itself. To complete the setup, confirm all parameters, and the program will create a new connection. By the way, the security certificate should be “WPA2-PSK”, as it guarantees the highest protection for your password, and the encryption type should be “TKIP”. This will ensure better access new devices to the access point.

    A few words about choosing a password. Don't use your name or pet's name, a date that is important to you, or simple character sets like "qwer1234," "123456," or "654321." It is not recommended to use the words “password”, “password”, “passw0rd”. After all, they are very easy to choose.

    Changing the password in wireless settings

    The second option for setting a password is suitable for those who do not want to create a new Internet connection. To do this, open an empty tab in any browser and enter the device’s IP address in the address bar. You can find it on the bottom cover of the modem, where all the data and necessary parameters of your device are always indicated. Also remember the login and password of the modem, they must be entered after the IP router.

    Next, the modem web interface window will open. Here you can find or change anything, be it throughput router or used DNS address. But we need the “Wireless Network Settings” or “Security Settings” item. This line may have a different name, since different modems have different settings windows. So don’t be afraid to switch tabs and look for the password field, you will recognize it right away.

    All that remains is to click the “Save” button and wait until the router reboots. If this does not happen, disconnect the modem from the power source, wait half a minute and turn it on again, otherwise the changes will not take effect. Don't forget to also recreate or update connections on all devices.

    Good day!

    - Why does my Internet slow down every evening, I can’t download anything, and pages take a long time to open? - an acquaintance once asked me.

    The next day, looking at his Internet settings, programs, router, etc., I was surprised by only one thing: his home Wi-Fi network was not protected by a password (there simply wasn’t one). Oddly enough, after setting a password, the slowdowns and lags of the Internet stopped, and in the evening the Internet began to work as expected. Apparently, there were some neighbors who successfully used his Internet channel, just in the evenings everyone comes from work/school, etc.

    In general, I will give one piece of advice: in any case, if you have any suspicions, change the password for the Wi-Fi network. If you don’t have it at all, be sure to install it (even if you have very fast unlimited Internet).

    In this article we will look at how this is done.

    Important! You also need to change your Wi-Fi password because those who connect to your network will use the Internet under your IP address. In principle, if they only occupy your Internet channel, it’s not so scary.

    But just imagine, what if they commit illegal actions - the first person they come to will be you (most likely)! I think there’s no need to explain that it’s better to avoid such visits? Therefore, PASSWORD is required!

    To change the password for accessing a Wi-Fi network, you need to do approximately the following:

    • go to Wi-Fi settings router;
    • then open the tab/section for setting up a wireless network (also called Wireless or Wi-Fi);
    • select in this tab security certificate, encryption type, And password to access the network.

    In general, everything is quite simple. Before moving on to specific models routers and their configuration, I will focus on several important parameters (mentioned above).

    Safety Certificate

    The most popular security certificates, which are found in almost every router, are WEP, WPA-PSK and WPA2-PSK. Today, the best security is provided by the WPA2-PSK certificate, which is what I recommend choosing.

    If devices that do not support WPA2-PSK will connect to the Wi-Fi network, then choose the WPA-PSK option (some routers have a mixed WPA/WPA2-mixed mode).

    By the way, some inexpensive router models may not work stably and may interrupt the connection when WPA2-PSK is selected. In this case, try limiting the speed of the router, and also changing the security certificate.

    Encryption type

    Closely related to the security certificate. If you select WPA, the temporary key integrity protocol TKIP is used; when using WPA2, the secure AES standard is used. This is exactly what I recommend starting from. If you select settings other than this, you may experience problems connecting devices to your network.

    Selecting a password

    Here, perhaps, I will say only the most basic things that I think about his choice. I noticed that many users put very simple passwords, type: 11111111, 2222222, 11111122222, etc. Such passwords are quickly selected and cracked.

    It is unlikely, of course, that someone will purposefully and for a long time select the password for your home Wi-Fi network (especially since the vast majority of them do not contain any valuable data), and nevertheless I will give a couple of tips on what it should be password:

    At least 8 characters;

    It is advisable to use both letters (Latin) and numbers (of course, some will also say special characters - but in my opinion it’s not worth it, it’s too tedious to type them later on a phone or tablet when connected to the network);

    Do not use your names, standard words (password, admin, computer, etc.), the most famous dates, etc.

    Now let's move on to specific router models. So...

    You might find this article useful on how to enter your router settings. In some cases this cannot be done (link is given below)...

    How to log in via 192.168.1.1: entering the router settings -

    D-Link

    One of the most popular brands of routers in our country. There are quite a large number of models, but there are not so many firmwares that differ from each other (fundamentally), 3-4 pieces. In this article I will give several of their variations, and first a few important parameters.

    IP address (default) to enter settings: http://192.168.0.1

    (it is advisable to use Internet browser Explorer)

    Login(default): admin

    Password(default): either an empty string or the same admin.

    In older router models (such as DIR-300, DIR-320, DIR-615, DIR-651), as a rule, the firmware is not translated into Russian and is presented in this orange-gray design. To change the password, you need to go to the router settings (if you can’t log in, then just above in the article there is a link to instructions for solving the problem) , and open the section "Setup/Wireless setup".

    At the bottom of the window in the column Network Key enter your password (see screenshot below), by the way, you can also set it there security certificate and encryption type(what this is - see above in the article). After entering the settings, save them - button Save Settings.

    DIR-300 - setting a password // Setup/Wireless setup

    By the way, there is similar firmware in Russian translation, it is configured in the same way.

    For router models DIR-300 NRU and DIR-320 NRU(firmware version 1.2) the settings page looks a little different: a nice white background, all the main settings sections are presented on the left side. Opening "Wi-Fi/Security Settings" , and install:

    1. network authentication: WPA-PSK (for example);
    2. PSK encryption key: this is your password;
    3. WPA encryption: TKIP+AES.

    For D-Link DIR-620/DIR-320 NRU routers in firmware versions 1.3 and 1.4 the interface is slightly different: when you go to the main screen, you see gray background and tiles (as in Windows 8) that display the main settings sections.

    To change the password, you need to open the “Wi-Fi/Security Settings” section (number 1 on the screen below), and then enter:

    1. network authentication: WPA2-PSK (for example);
    2. Encryption key - enter the password;
    3. WPA encryption - AES (see screenshot below).

    Router from Rostelecom (Sagemcom)

    In general, with routers from Rostelecom, as a rule, big problems does not occur - everything works as expected. And when you connect to the Internet, they will give you a password and set everything up. The firmware in routers is completely in Russian, so questions about its configuration usually do not arise.

    Address to enter settings: http://192.168.1.1/

    Default password and login: admin

    Browser: almost any: Opera, Firefox, IE, Chrome, etc.

    To set a password, open the section "WLAN Setup/Security" . Further in the subsection "Manually setting up an access point" select:

    1. Authentication - WPA2-PSK;
    2. WPA/WAPI password - enter your password;
    3. Encryption WPA/WAPI - AES;
    4. then click the button "Apply/Save" (screenshot below).

    Actually, that's the whole setup...

    Tp-Link

    One of the largest manufacturers of routers, tens of millions of people around the world use their products. In our country, their routers are also very popular, and cope quite well with Russian networks(they work with almost all Internet providers).

    IP address to enter settings: 192.168.1.1 (in rare cases 192.168.0.1 , depending on the firmware version);

    Username: admin;

    Password: admin (type without periods, commas, etc.).

    Most often you have to deal with the so-called “green” firmware. Found in routers: TP-LINK TL-WR740xx, TL-WR741xx, TL-WR841xx, TL-WR1043ND(45ND), etc. About 50/50 firmware is in English/Russian.

    The screenshot below shows the English version: to change the password, you need to open the section "Wireless/Wireless Security" , then select WPA/WPA2 -Personal and put:

    • Version - Automatic (Recommended);
    • Encryption - Automatic (Recommended);
    • enter the password in the line PSK Password .

    TP-Link (green firmware)

    Almost identical actions will need to be done in the Russian version of the “green” firmware: open the section "Wireless Security" , then set PSK password(see number 3 on the screen below).

    TP-Link "green" firmware (Russian version)

    You can also quite often find a “blue” version of the firmware in TP-Link routers(for example, TP-LINK WR340G, TP-LINK WR340GB and other similar models).

    Their setup is almost identical:

    1. first open the section "Wireless Settings" ;
    2. in the column Security Type install WPA-PSk/WPA2-PSK;
    3. Security Option- set Automatic;
    4. Encryption- install Automatic;
    5. PSK Passphrase- this is the password (slightly different spelling than in other firmware versions). It must then be specified when wireless connection to the router.

    TP-Link "blue" firmware

    After making the settings, save them (button Save on the screen above, see number 3).

    TRENDnet

    The access parameters are relevant provided that the router has factory settings and its IP has not changed.

    IP address to enter settings: http://192.168.10.1

    User Name (login): admin

    Password (password for access): admin

    In general, TRENDnet routers most often have 2 firmware versions: blue and gray (both in Russian and in English).

    To configure security and set a password in the blue firmware, for example, of the TRENDnet TEW-432BRP router, you must do the following:

    1. open section Wireless/Security ;
    2. in the field Authentication Type select WPA;
    3. in the field PSK/EAP select PSK;
    4. in the field Cipher Type select Auto;
    5. in the field Passphrase and Confirmed Passphrase enter your password and press Apply(screen below).

    In the “gray” version of the firmware (for example, as in the TRENDnet TEW-651BR router), actions are performed in the same way, even menu items are located in the same places.

    Asus

    IP address (web interface): 192.168.1.1

    In the authorization lines, type login: "admin", password: "admin" (enter without quotes!). Browser preferably IE (although modern versions web interface works well with all popular versions Firefox browsers, Chrome, Opera, etc.).

    Most often, ASUS routers have two firmwares: “blue” and “black” (usually localized in Russian).

    To change your password in ASUS routers RT-N10E, RT-N10LX, RT-N12E, RT-N12LX, etc. (this is with blue firmware), you need to open the section "Advanced settings/Wireless network/General tab" .

    In the column "WPA pre-shared key" enter your password and save the settings.

    ASUS // "blue" firmware

    In ASUS RT-N10P, RT-N11P, RT-N12, RT-N15U, RT-N18U routers, the firmware (in terms of password settings) differs only in color. In it you also need to open the section "Wireless Network" , tab "General". Then change the column "WPA Preshared Key" and save the settings.

    ASUS // "black" firmware version

    Zyxel

    • IP address of the router on the network (web interface): 192.168.1.1
    • Login: admin
    • Password(default): admin

    To change the password on ZyXEL Keenetic of the first series, you need to go to the web interface, open the section "Wi-Fi network", tab "Safety" . Next set the following parameters:

    • Authentication- WPA-PSK/WPA2-PSK;
    • Type of protection- TKIP/AES;
    • Network key format- ASCII;
    • Network key (ASCII)- set your password, which you will then need to specify when connecting wirelessly to the router.

    In newer routers (for example, Zyxel Keenetic II: Start, Giga, Omni, Viva, Extra) a slightly different firmware is installed. To change the password in them, you need to select the section in the menu "Wi-Fi" and then select the tab (top) - "Access point" .

    NetGear

    • IP address to enter the router settings: 192.168.1.1
    • Login: admin
    • Password(default): password
    • You can use almost any browser: For example, Internet Explorer, Mozilla Firefox, Opera, Safari, etc.

    To change your password in NETGEAR routers(using model WNR2200 as an example): open the "Wi-Fi Settings" section, then set:

    • Security options: select item WPA-PSK (TKIP) + WPA2-PSK (AES) ;
    • Passphrase: enter your password (you will need to enter it later when connecting wirelessly to the router).

    Basically, in this short article I tried to consider all the most popular models routers. If you have a different model from those given, the operating technique will not change: first you need to find the IP address to enter the router settings (can be found in the documents for the device, or on the manufacturer’s website to determine the characteristics of the PC).

    Then, having entered the router settings, open the Wi-Fi security section (or Wi-Fi settings) - then set the desired password and save the settings. Difficulties most often occur when entering the router settings: either the password does not match, or the IP address is incorrect, or something else...

    This is where I end this article, hello amigo!

    Read more: