Huawei router default password. How to independently configure a Huawei hg8245h router under Rostelecom

The list of default passwords for Huawei routers allows you to change the settings of the distributed Wi-Fi network.

List of default passwords for Huawei routers

To set up a Huawei router, you need to connect the device to your computer using a data cable or by connecting to the Wi-Fi network provided by the router. To access the settings, go to any browser and enter the address 192.168.100.1. Logins and passwords can be like this:

telecomadmin\admintelecom;

telecomadmin\NWTF5x%RaK8mVbD;

telecomadmin\NWTF5x%;

telecomadmin\nE7jA%5m;

• kyivstar\kyivstar.

Important! In some models, the standard data is different, look for the login and password on back side router.

Wi-Fi password

Wi-Fi passwords depend on the Huawei router model. For example, a series of routers was released specifically for the Kyivstar company and configured for distribution home internet Kyivstar. You can determine the login and password for the Network only by looking at it on the back of the router or changing it in the settings.

How to reset settings to factory settings?

To reset settings to factory defaults (this option is suitable if you cannot log in using standard passwords), you need to find the reset button and press it for 5-10 seconds (see photo).

Often when users first get their hands on Huawei HG8245 router, they believe that now their era of ruling the world has come and to take over the Internet space they will only need to insert a plug into the socket.

However, this is not true. To take the first step towards this, you will first have to study, and then.

Design

It is worth noting that the selected router is a fairly good and very popular option due to promotional offers from some service providers.

The Huawei HG8245 router allows you to get the maximum of services provided by the provider, which is what makes it so attractive.

In particular, it can be used not only for, but also as an IP television receiver in high quality.

The HG8245 router belongs to the category of optical terminals, and its design is equipped with 4 ports for connecting wires (LAN). and a pair of IP telephony ports.

Some modifications also have, which allows you to connect a wider range of devices, including.

The design of the router is modern and attractive, and you can find models in both dark and light versions.

Its design is compact and extended to 19.5 cm, and the thickness is 3.5 cm.

Thanks to the presence of special mounting holes in the lower part of the case, it can not only be installed on flat horizontal surfaces, but also mounted on walls.

Thanks to its design features, the HG8245 router allows you to connect not only a standard set of office devices, but also IP-TV.

If desired, the functionality of the router can be increased by connecting a USB drive ().

And for the purposes additional security The manufacturer suggests using a branded one.

Rice. 1 – Appearance router

First startup and initial setup

The router is connected using two wires. One of them must be optical and connected to the corresponding Optical port.

The other one connects to LAN input, and it is to this that the connection must be made upon initial startup. After this, the Huawei HG8245 router can be connected to the network.

To supply power you need to use the corresponding button on the case. In order for the router to perform its functions, it must be configured after the initial startup.

After connecting the cable to your PC or laptop, you will need to launch a browser, for example, Internet Explorer or .

IN search bar to open the WEB settings interface you will need to enter local address « http://192.168.100.1", which will allow you to download a form in which you will need to enter registration data.

Depending on the firmware version, the login/password pair may differ. It could be a couple root And admin or telecomadmin And admintelecom.

Try entering a second pair if the first one did not work and the settings window did not load.

Rice. 2 – Welcome window of the WEB interface

Working with WEB interface

Once the settings page has finished loading, you can change the operating parameters from factory default to custom. Initially, you need to enable the LAN ports.

This will require using the "WAN" menu section. To activate them, you need to check the boxes.

On the tab, the ports will be displayed as a line with their corresponding names. To confirm the changes you will need to click “Apply”.

Then, using the “WAN” menu section in the “Modifications” subsection and “Route” in the “servicelist” list, you need to select “INTERNET”.

In order for all entered data to be saved correctly, you need to make a mark in the “System tools” section using the “Save configuration” element.

Rice. 3 – Interface tab “System Tools”

Tweaking your router

Latest versions popular operating systems allow you to do without fine tuning connections. The appropriate network parameters are set automatically.

But all rules have exceptions, and if automatic does not occur, you will have to carry out a number of operations.

IN open window you will need to select the “Create a new connection” item, and in the dialog - "High Speed".

The login and password received from the service provider must be specified in the following prompts of the setup wizard. There you will also need to enter the WLAN ID, which is also provided by the provider.

Sometimes this is not enough to use the Internet, and therefore you have to pay additional options and options in the WEB interface.

After launching the Huawei HG8245 profile in the “WAN” section, you will need to fill in the “Username” (login) and “Password” (password) received from the provider.

Upon completion of the operation, you need to create a new connection by clicking “New”.

On the “Mode” and “Route” tabs, select options in the lists: “service list” - “INTERNET”, connection type - “PPPoE”. The “username” and “password” are re-entered.

In the “Blinding options” subsection you will also need to mark the ports and WLANID that were initialized on initial stage configuration.

For the settings to be saved, you will need to click “Apply”.

At the final stage, you will need to reboot the device, be it a laptop or PC, and use the cable through the “Optical” connector.

Rice. 4 – “Status” tab

Setting up Wi-Fi in the router

If you belong to the category of users who often access the network via Wi-Fi gadgets, you cannot do without configuring Wi-Fi in the Huawei HG8245 router.

For this purpose, the same WEB interface is used. However, in this case, changes will need to be made in the WLAN section.

First you need to set the marker to “Enable WLAN”, i.e. permission to distribute. You will need to enter little information on the tab. These include:

• SSID name (network name) – set arbitrarily (all users will see it);
• greatest number parallel connected gadgets (preferably no more than 10);
• WPA PreShared Key (Wi-Fi password).

Tip: when choosing a password, make sure that it is easy to remember and enter. Moreover, it can include several numbers and letters with a total length of about 10 characters.

Additionally, to ensure security, you need to fill in the “WPA Group Rekey Interval” field, in which you should also indicate the created security key.

To save the entered parameters, use the same “Apply” button. Only after this Wi-Fi will function according to the configured parameters.

Rice. 5 – “WLAN” interface section

Huawei has been manufacturing for many years network equipment, gaining worldwide fame and a place on the list of leaders. The ease of use and low cost of routers allowed the company to gain a foothold in Russian market and become a partner of Rostelecom. Although HG8245 belongs to basic models By changing the settings, you can expand the capabilities of the adapter. Before you fully configure your Huawei router under Rostelecom, you should study it.

It is worth immediately noting the advantages of this model:

• the presence of remote monitoring of the Internet connection (number of connected devices, download speed, traffic statistics);
• automatic diagnostics of problems and quick setup will allow you to solve any problems without a long search for an answer on the Internet;
• support virtual server and statistical IP address;
• ability to connect a network switch and IPTV connection;
• Availability of using a VPN connection and encrypted channels.

Description of the ONT HG8245 optical network terminal connectors

Rear panel:

• LAN 1-4 - allows you to connect to a PC using network cable;
• TEL 1-2 - connector for connecting a telephone cable;
• OFF/ON - classic power button;
• POWER - for the power cord.

Side:

• The USB port makes it possible to update the router firmware using a flash drive;
• RESET - reset the router settings to factory settings;
• WLAN — turn on/off the wireless network;
• WPS - responsible for fast connection adapter to mobile devices and signal transmission.

Top side:

1. POWER - Shows whether Wi-Fi is turned on.
2. LAN 1-4—connection with other devices that are connected via a LAN cable (supplied with the device). If the light does not blink, then you should restart Wi-Fi and check that the cables are connected correctly to all devices.
3. WLAN - indicates proper operation Internet. Rapid blinking of the light is responsible for the speed and stability of the signal, while its absence or non-stop lighting indicates connection problems on the part of the user or provider.
4. USB - is responsible for connecting various USB storage devices to the device.
5. TEL 1-2 - responsible for the activity of telephone ports.
6. LOS - red color characterizes weak signal, while green is stable and fast.

The basic number of buttons and connectors is user-friendly and will facilitate connecting the Rostelecom network to Huawei. The lack of an additional port for a computer or laptop can be solved by purchasing a network switch.

Setting up Huawei HG8245 router for Rostelecom

To start setting up the modem, you need to connect it to your computer using a network cable. Going to settings network card, set the IP address to 192.168.100.1 and the subnet mask to 255.255.255.0. After the final change of parameters, do not forget to change the mask and IP to automatic.

How to enter the settings of a Huawei router

Do not forget that if the router has already been configured by another provider and you need to change the settings, you will first have to reset them to factory defaults using Reset buttons. Using a browser, enter 192.168.100.1 in the address bar and press Enter. In the authentication window you need to enter the user login and password: “root” and “admin”, which are basic for most models.

Changing the factory password

The first thing you should do is change your password, since Wi-Fi has a two-level security system. Going to the WLAN tab, you need to change the authentication method to WPA2 Pre-Shared Key and enter the password using various symbols, numbers and capital letters to avoid hacking. You can save the changes with the Apply button. After that Wi-Fi adapter will need to reboot; For subsequent connection you need to use a password.

How to set up WiFi router Huawei Echolife HG8245

After changing your WiFi password, you can go to detailed parameters Internet connections:

• SSID Name - the name that the adapter will have in the search for devices;
• Associated Device Number - the number of devices that can connect;
• Channel — you should set the mode to “Auto”;
• Channel Width - responsible for the stability of the connection with various devices(it is also recommended to set it to “Auto”, since most devices have the same channel, which is easily recognized by the router system);
• Encryption Mode—signal encryption type; if you are concerned about your safety, then you need to set “AES”.

After this the basic Huawei setup HG8245 is finished, and you can move on to using the Internet or advanced settings to improve signal quality. To connect to a device using a phone, tablet or laptop, you need to activate Wi-Fi search, find the name of your adapter, enter the password and wait 1-2 seconds while the settings are transferred.

How to set bridge mode

Setting the mode may seem easier than setting up the adapter automatically and quickly. Going to the WAN section, you need to select Bridge from the Mode item, and from Bridge Type – IP Bridget and install by clicking the “Save configuration” button. It will then reboot and save changes, and bridge mode will be set.

How to set up IPTV on Huawei

After connecting the router to Rostelecom, you need to switch to the WAN tab, where you can create IPTV connection. All information to fill out about VLAN ID and Multicast is specified in the agreement with the provider. After saving the changes, you need to check the connection activity in the Network Application tab.

Firmware update

Download latest update You can download the router firmware from the official Huawei Internet blog; it is published approximately once every 2 months. You can use 2 installation methods:

1. Using a flash drive and connecting it to the USB connector located on the side of the adapter. By re-writing the address “192.168.100.1” into the browser line, you need to go to the “System Tools” section and select “Firmware Upgrade” and click the “Update Firmware” button, after which the automatic update will begin.
2. The “.dll” format file can be saved to your computer and the operation can be repeated by downloading the update in the HG8245 settings via address bar.

Reset settings

In order to reset the router, you need to insert a thin object (a needle, a pin) into the Reset connector. After the click, you should hold the item inside for a few more seconds until the Wi-Fi router begins to reboot. Then you can go to re-tuning adapter and set a password.

If you have several computers at home and only one Ethernet cable, then it is recommended to purchase a wireless router. Good device This type is the Huawei HG8245H router.

Router settings, as we know, are made through the control panel (web interface). But what is the password and IP address of the HG8245? After all, this data is necessary to access the admin panel. Below we will find out what to enter when logging in, how to install and configure this network switch according to the instructions.

Brief technical description

The Huawei HG8245H router is a device for managing Internet networks and telephony. The router works with both wired and wireless networks. The device belongs to the class of GPON terminals, so using this device you can achieve high connection speeds (up to 1.2 gigabits per second).

Externally it looks like a small rectangular box white. On the sides of the device there are 2 antennas for working with wireless networks. Please note that the device is available in different versions(HG8245A, HG8245M and others). However, they differ slightly from each other (usually only the factory defaults differ).

Detailed technical specifications devices are presented in the table below:

Watch the video review here:

Connect and configure

Let's now learn about how to set up a Huawei router. First, take the device out of the box and connect it to the mains. After connection, the green indicator light next to the PWR mark on the device should light up.

Now take an external Internet cord or telephone cable and insert it into one of the two connectors for the MGTS GPON network. The connectors are painted black and are located on the back of the device. Once connected, another green light on the router should light up next to the POS or LOS mark.

Once connected, you should activate the device. You can do this in two ways:

• Via Ethernet cable. To do this, you need to connect the router to the provider’s cable, and insert the patch cord into 1 of 4 connectors (the required sockets are colored yellow). Insert the other end into the Internet card slot on the computer.

• Via Wi-Fi. Using the Wi-Fi adapter on your computer, find your router and connect to it.

Now you need to go to the settings menu. Open any Internet browser, enter the address of your device into the search bar and press Enter.

Please note that HG8245H routers have an IP address of 192.168.100.1.

If the device has already been in use, then it is quite possible that the previous owner changed the login and/or password. In this case, you need to reboot. To do this, click the “Default” button on the router. After the reboot, you should enter the standard login and password root/admin.

Instructions for logging into the interface are available in video format:

Also note that on some HG8245 routers, depending on the firmware version, a different factory Login/Password is installed by default:

Working with a modem

After entering the data, the configuration panel will open. Let's now look at the basic settings of the Huawei HG8245H.

Internet activation (for Rostelecom)

1. Open the “LAN” tab and select “Lan Port Work Model”. Make sure all ports have checkboxes. If there are no checkboxes, check them and click the “Apply” button.

1. Now open the WAN tab and configure according to your agreement with the provider. Typically the setup looks like this:

• check the box next to Enable WAN,
• select IPoE,
• in the WAN Mode block, specify Route,
• in the Service Type block – INTERNET,
• check the box next to VLAN,

• then fill in the VLAN ID, Encapsulation mode and IP acquisition Mode blocks according to your agreement with the provider.

If you have any difficulties, contact your service provider's technical support by phone.

Activating a Wi-Fi network

Now open the “WLAN” tab and select “WLAN Configuration”. You have entered the wireless network settings block.

We configure the network like this:

• come up with a name for the network and indicate it in the SSID Name block,
• check the box next to Enable SSID,
• in the Device Number item we indicate the maximum number of connections (up to 32 pieces),
• in the Authentication Mode item, select WPA or WPA2,
• in the Encryption Mode block we set AES,
• come up with a password and indicate it in the WPA Key item (at least 10 characters),
• Click the “Apply” button.

We also fill out additional items: Channel – Auto, Channel Width – Auto 20/40, Mode – 802.11b/n/g.

For fans of the video format, setup instructions are available here:

Popular problems and errors

Let's now look at the main problems that a person may encounter when setting up a router:

1. The device's IP address is different from 192.168.100.1. In this case, you need to do the following. Click the "Start" button, select "Network and Internet Settings" - "Ethernet" - "Related Settings". Need to go to settings network adapter. Then select your adapter and right-click. In the menu that appears, select “Status”. In the table that opens, find the “Gateway” item. There you will see the real IP address of the router. Copy it and paste it into your browser's address bar.

1. The router is not compatible with your computer's settings. This problem can be solved like this. Open the adapter settings according to the instructions above, select version 4 protocol and click the “Properties” button. Click "Use the following IP". Complete the appropriate blocks as follows:

• IP – 192.168.100.5,
• mask – 255.255.255.0,
• Gateway and DNS – 192.168.100.1.

Click OK, open your browser, and try connecting to your device again.

Conclusion

Now you know how to go to settings wireless router Huawei. Let's summarize. After connecting the HG8245 to the power supply, do initial setup. To do this, you need to connect to the device either via a cable or via a Wi-Fi network and specify its address. Then they write the username and password. The admin panel of the router will become available, where you can make all the settings.

If you have any questions, be sure to write in the comments! If it was useful, please rate it. If you forgot something, write too! See you!

Preparing to set up Wi-Fi on the HG8245H-256M

Insert the cable from the computer's network card into ports 1-3 of the router. The 4th port cannot be used for the Internet since IPTV is output to it. To begin with, I will say that the Internet on the computer works via cable right away. If it doesn't work you need to call toll free number 123 and ask Beltelecom technical support to configure PPPoE on it. Next, let's try to go to the Web interface for managing this router: http://192.168.100.1 or enter this IP address in your browser:

To log in to the router Huawei HG8245H-256M enter username root and password admin and press Login. You can also log in using the following username: telecomadmin and password admintelecom, which will open a little more settings for you.

If the page opens, then go to For those who do not have a DHCP client in Windows or the DHCP server is turned off on the router, you will have to manually configure the IP address of the network card. If the Internet works but is slow, we recommend trying it

Setting up a network card in Windows 7

Right-click on the computer icon in the tray (lower right corner of your Windows desktop)

In Windows 7 you need to go to the Network and Sharing Center

Choose network interface, which looks at the router (to which the modem is connected). If there are several of them, configure everything in a row: If you only use ByFly on your computer, there will be nothing wrong if you configure the addresses on all interfaces.

You can click the information button and look at the “default gateway”; perhaps an IP from a different subnet is set there. (This happens if the router was used before you) Example:

Then you need to connect to the default gateway.

If nothing works, perhaps the DHCP client is in operating system"died" and clicking the properties button in the "States" window network connection"set up a static IP:

By the way, I advise you, if your Internet is slow, uncheck “Internet Protocol version 6 TCP/IP v6”, this sometimes helps.

Fill in the IP addresses on your computer in accordance with the table.

The IP address field is unique for each computer on your network. Do not configure the same addresses for neighboring PCs and phones. make them for example 192.168.100.253, 192.168.100.252......

If after this nothing works, all you have to do is try changing the router from Beltelecom or call us.

Setting up Wi-Fi on the router.

Setting up HG8245H-256M starts by entering the WLAN/WLAN Basic Configuration tab.

There you need to fill in:

SSID Name - the name of your network

Authentication Mode: it is better to choose the most modern authentication method for home networks, for today - WPA2 PreSharedKey.

Encryption Mode: Encryption mode - AES

WPA PreSharedKey: Here you need to enter your Wi-Fi password. If the confidentiality of data transmitted through the network and the exclusion of theft of your traffic is important to you, then when choosing a password, it is recommended that it meet the following requirements:

• Symbols and letters in lower and upper case
• The password contains numbers
• You cannot use words in the key, since the password to your network can be guessed by a brute force attack using a dictionary.
• It is undesirable to use words with the addition of numbers, symbols and letters, since a hybrid dictionary attack can be carried out.

Setting up Huawei HG8245H-256M for maximum performance

If you have an Internet tariff of 25Mbps or more, it makes sense for you to increase Wi-Fi performance. Let's go to the tab WLAN Advanced Configuration

Set the width of the channels ( Channel Width) in Auto 20/40 MHz, which will give a twofold increase in performance in low-noise Wi-Fi networks in a private home. If your point is located in a dense urban area, a channel width of 20 MHz can provide greater network stability.

For maximum performance mode ( Mode) you can set 802.11n, but laptops made before 2009 will most likely not be able to connect to such a network. However, there are few such devices in 2018.

Selecting channel 13 can also increase performance, since some routers do not support channel 12-13 due to the fact that they are not suitable for working in our region. But keep in mind that client devices with the US region and many others will not be able to connect to this network

Connecting to Wi-Fi without setting up a router

You can also connect to a Wi-Fi network organized using this router without configuration. You first need to remove the frame with the optical cable attached to it. Then you will see 3 stickers on one of which you will find the name of the network and the key to it.

To do this, you need to find a sticker with the SSID and WLAN Key on the device body.

P.S. Also, if you have not disabled WPS, you can connect to the network by pressing this button on the router while connecting.

If your laptop doesn't see Wi-Fi networks read this instruction. If you cannot configure the router yourself, you can also call a specialist to your home.

You can also watch a video on opening a port for incoming connections to your server. True, in 2018 this only makes sense if you have purchased a static IP. A dynamic address is not suitable since Beltelecom has not issued Internet-routable IP to routers for a long time. Most of us now surf the Internet behind double NAT.