Enter the tp link modem settings. How to log into a TP-Link router? Connecting and setting up a TP-Link router

The purpose of the work of any self-respecting large company- meeting customer needs. And the more convenient the product is for them, the more there will be consumers in the end. That is why, in order to make life easier for our clients and simplify the process for them to enter the settings of their wireless routers and modems, TP-Link is introducing on its devices the ability to access the web configurator using a hostname. It all started with . AND for a long time This is the address that was used. But over time, the picture changed. On newer devices you can find another option - address tplinkwifi.net to configure the router.

Later, several more options appeared. Now big picture looks like this:

Tplinkwifi.net - modern Wi-Fi TP-Link routers
- tplinklogin.net - old versions and firmware of routers and modems
- tplinkap.net - TP-Link access points
- tplinkextender.net - repeaters and signal amplifiers
- tplinkmodem.net - ADSL modems and TP-Link routers

The point of using hostnames is that the user does not have to guess what IP address his WiFi router has - 192.168.1.1, 192.168.0.1 or some other, but simply enters the address of the router’s website into the address bar of the browser - tplinkwifi.net, tplinkmodem.net, or tplinkap.net. This is especially true in cases where the device’s IP changes when updating the firmware, thereby confusing the average user. A striking example is the tl-wr720n, tl-wr740n or tl-wr841n models. To the point that the owner has to take the modem or router to a service center.

To find out which hostname is used on your TP-Link router, just turn it over reverse side and look what is written on the sticker:

I would like to note that on modern tp-link routers, even if you enter the wrong hostname as written (for example, tplinklogin.net instead of tplinkquifi.net), the device will automatically redirect you to the correct address.

How to log into tplinkwifi.net to configure the router

In order to log into the router settings system through the hostname, you just need to launch any Chrome web browser, Internet Explorer, Edge or Opera. IN address bar, where you usually enter the address of the desired Internet resource, enter the address of the router’s website: tplinkwifi.net, tplinkmodem.net or tplinkap.net. and press the Enter button.

If suddenly logging in via tplinkwifi.net or tplinkmodem.net is unavailable and the login request with password does not appear, and the error “This page could not be displayed” appears, then most likely there is a problem with the settings network card or operating system. In this case, it will be easier and faster to log in the old fashioned way - through IP. But here the question arises - how to find out the IP address? TP-Link router. Very simple! Opening network Windows connections 10 and right-click on network connection, through which the modem or router is turned on:

In the menu you need to select the “Status” item. After this, the following window will open:

Click on the "Details" button to access information about the network connection.

In the window that appears, we carefully look at what IP address your computer will receive and what is written in the “Default Gateway” line - this is the router’s IP. Typically 192.168.0.1 or 192.168.1.1 is used. Then simply write it in the address bar of the browser instead of tplinkwifi.net and press the Enter key. Like this:

After that personal account TP-Link router settings should open without problems.

These settings are often called the web interface or control panel. As well as a web configurator, etc. All work on entering settings parameters wireless router carried out in his personal account.

Despite the apparent simplicity of all operations for entering there and entering network parameters, a significant number of owners of TP-Link routers experience difficulties with this.

The following guide will help you eliminate possible connection problems. For clarity, it contains images and screenshots that accompany all the step-by-step instructions.

How to login

IN latest models For its devices, the company began using a hostname like “tplinklogin.net” or “tplinkwifi.net” to enter your personal account. And older equipment mostly used a standard digital IP address, such as “192.168.1.1” and “192.168.0.1.”

It should be noted that in modern routers from the company in question, both options for launching the web configurator often work successfully.

To find out which method should exactly work to gain access to the settings, you need to study the documents for the router, where the manufacturer always displays the current address, or simply turn the device over and look at the sticker.

The authorization parameters specified by the manufacturer are also written here: name and code.

The most common problems when logging into the web interface

It happens that sometimes it is impossible to do this, and the browser displays the message “Unable to access the site.”

Or an error notification appears: “Web page not found.”

Of course, this problem can be solved with one call to the provider, who will send a specialist from the group technical support. An experienced employee will quickly fix all the problems for a fee, but when the user does not have time to wait for his arrival or does not have the extra financial resources to pay for a small service, then with a little care and patience, you can fix everything yourself.

The main reasons for lack of access to your personal account are usually the following:

1. The web interface address was entered incorrectly;
2. Error in the IP of the network card;
3. Suitable not installed software for its normal functioning;
4. Problems with the hardware of the TP-Link router itself;
5. Cable defect;
6. Malicious applications.

Incorrect IP input

Due to inattention or lack of sufficient experience, very often users make mistakes when entering IP in the Internet browser. Thus, dots are often missed between address numbers, and sometimes spaces are placed between them. Also, instead of zero, some people type “O”.

You must be especially careful when typing an address, since you will not be able to log into your personal account even if you miss or mistakenly enter any of the characters into the address bar of your browser.

When you log into the web configurator via IP, you should type it in the address bar of the browser, and not in the search bar. A correct input example is shown in the image below.

You just need to enter the address accurately from the first to the last character - and the problem often solves itself.

Sometimes, even if you enter it correctly, the configuration menu does not launch, but instead a window that looks like this opens:

This means that there is probably no connection between the router and the PC. It is recommended that if the user used a connection to the router via Wi-Fi, connect the computer to the device with a patch cord.

If a wired connection is already used, check the integrity of the cable. There should be no damage, tears or kinks on it.

Beginner users are concerned about the “!” symbol. in the connections icon. It should be noted that it will disappear after a successful connection to the Internet. And to enter the configurator, access to global network not needed. The main thing is to ensure that the direct connection between the router and the personal computer is in full working order.

It is not recommended to configure the router through the Opera Internet browser, as some parameters may not be displayed correctly in it. It is better to use Chrome or standard Explorer for these purposes. If all the above instructions are followed correctly, the authorization menu will appear.

By default, the password and name are usually the same - admin. They are written in the accompanying documentation for the device and on a sticker at the bottom of the case. On used devices these parameters have been changed and should be obtained from the last owner.

If it is impossible to contact the old owner of the device, you can roll back all device settings to the factory configuration. To do this, you will need, armed with a thin hard object, to press the “Reset” button recessed in the router body.

If all the inscriptions on it are translated into Russian, then under this button it says “Reset”. After holding it for about ten seconds indicator lights the device will blink and all parameters will be reset. The user only needs to release the reset key and wait for the router to reboot.

After this, the password and name will be in effect again, and they will launch the control panel.

Incorrect network settings

If, despite all the above recommendations, you cannot open the required menu, probable cause this is an error in network settings PC.

You need to do the following:

Network card software

Often, access to the web configurator is not possible after updating or reinstalling Windows, and the PC owner has not installed the appropriate drivers for the equipment.

To make sure normal functioning network controller, you only need to complete the following few steps:

1. Launch "Device Manager";
2. If the equipment item is red or yellow icon“!”, this means you need to update its drivers.

If the system was unable to detect the corresponding software in its database, the user needs to visit the official website of the device developer from another PC located online on the network and download the drivers to a flash drive, from which they can then be installed on the problem computer. After this, nothing should prevent access to the router interface.

Conclusion

As you can see, the problems can be easily solved without the help of a specialist, the main thing is to show a little patience and attentiveness.

Routers allow people to send and receive wifi signal. They are truly popular, and manufacturers could not ignore this. Every day they are released more models routers. The problem is that not every user can configure this device themselves. In this article we will talk about how to go into the tp link router settings.

If your Wi-Fi router is connected to a computer, then let's talk about how to enter its settings:

• Turn on your computer. Open the browser available on it.
• We take the router in our hands and turn it over to the reverse side. We are looking for the item that indicates the device id. 192.168.1.1 is the standard id for the tp link transmitter.
• We enter the combination that we learned in the previous paragraph into the address bar of the browser.
• A small window appears. It contains two items - “Username” and “Password”. If no action has been taken on your device, the standard data specified on back side. Most likely it is admin/admin.

Username

• If everything is done correctly, the tp link router configuration is enabled.

There are times when a Wi-Fi router, despite following all the instructions, does not enter the web interface. If you cannot enter the router settings, then read the next part of the article.

Checking the connection to the computer

Before setting up the router, you need to check its connection. It comes with a white one network cable. Using it, the router connects to the computer. If you did it correctly, but the problem does not go away, then reboot the devices. It also doesn’t hurt to check all the cables again; they may not be plugged into the ports enough. This completes the installation of the device.

If the Wi-Fi transmitter is connected to the PC correctly, then the LAN lights on it are lit.

We are looking for a problem in IP and DNS

This is one of the most popular reasons why you cannot access the web interface on TP link routers. You need to check whether IP and DNS are automatically obtained. This is especially true for those who have previously used connections with static addresses.

Step by step instructions:

• Right-click on the Wi-Fi and connections icon located in the lower right corner of the screen. We select the item that will take us to network management.

Network management icon

• We open the window. Follow the steps shown in the screenshots.

Item: change adapter parameters

• Now you need to open the properties of protocol version 4. Be sure to set the settings exactly like this.

Properties of TCP/IPv4

After these steps the problem should go away. As you can see, setting up the transmitter is not difficult.

Incorrect username or password

If you provide standard login information, but it gives you an error, then most likely you have already used the router. Or the settings are simply lost. This means that you do not know the new account to log in to. Fortunately, the problem can be solved by the following in a simple way. Instructions on how to reset your tp link router:

• We find a needle or other thin device.
• We are looking for a small black hole on the router. There should be an inscription “reset” next to it.
• Carefully insert the needle into the hole. We wait more than 10 seconds.

After this, the Wi-Fi router returns to factory settings. All the information on the back side works for him.

Now you know what to do if your router settings are lost.

Specifying the router address

If somehow you cannot find out the link to the settings, then this can be done without the help of a Wi-Fi transmitter. To do this:

• Turn on the interpreter command line. Enter the key combination “win” + “r”. A small window appears, enter “cmd” into it.
• Have you come in? Great. Enter "ipcongif".
• The command line produced a lot of text. We are looking for what is indicated on the screenshot.

• The address used by your device may vary.

If you enter the numbers indicated in the CMD into the address bar of the browser, you will be taken to the wifi transmitter settings. This is how you enter the tp link router settings.

Let's sum it up

Setting up a tp link wifi router is easy. Just go to the web interface; instructions for this are listed above. If any problems arise, try rebooting the router or resetting it to factory settings.

If you need to configure a router, then you are in right place. Our site talks about logging in and setting up home and office routers. We'll help you find your router and set it up the way you want. How to configure a TP Link router?

Read the table of contents to quickly find the information you need.

Changing your wireless network name or password on most TP-LINK routers can be easily done using the routers web interface by following these steps:

1. Open a web browser (Internet Explorer/Chrome/Safari, etc.) and enter the router's IP address in the address bar - or 192.168.0.1 (192.168.1.1)

When prompted, enter the default username, "admin" and password, "admin" to log in.

2. From the menu on the left side of the screen, select « Wireless communication» . From the submenu select "Wireless Network Settings".

3. To change the name of your wireless network, simply change the text in the field "Wireless Network Name" to a new network name. Click the button "Save" at the bottom of the screen to apply the changes.

4. To change your wireless password, select « Wireless Security» in the submenu "Wireless" on the left side of the screen.

5. Change your wireless password by changing the field « Wireless password" V WPA2-PSK settings. The TP-Link password must contain at least 8 characters. Click the "Save" button at the bottom of the screen to apply the changes.

6. After making changes to Wirless Network Name and Password, you need to reboot your router. To do this, select « System Tools» in the lefthand menu. Then select Reboot from the submenu. Click the Reboot button on the main panel.

The router should now reboot and apply the changes made. Make sure all your devices are updated to connect to the new wireless network name using new TP-Link the password you chose.

TP-Link password does not work

You should try a different TP-Link password. We have a large list of TP-Link passwords that you can try to find here. It's possible that your router's default password is different from what we've listed here.

Forgot your TP-Link password?

If you still can't log in, you may have to reset your router to default settings.

How to reset a TP-Link router if you forgot your password

This article applies to: TP-Link password

Please note:

1. A hard reset will restore your device to its factory default settings. You must reconfigure the device from scratch, or you can download the configuration file you created before resetting.

2. For these models we could see a button WPS/RESET on the back/front. To use the WPS function, press the button for less than 5 seconds and then the WPS LED will light up; To reset the router, press the button for at least 10 seconds.

Exists two ways Resetting the router to factory settings:

Method 1: Hard reset / When pressing the RESET button

At included router, press and hold the button WPS/RESET(more than 10 seconds) until the SYS LED starts flashing quickly with a slow flash. Then release the button and wait for the router to reboot to its factory default settings.

Guides on how to enter the control menu have already been compiled for almost every known router. Today we will tell you in detail and clearly show how to get into the settings on TP-Link devices(TL-WR841N, TL-WR720N, TL-WR741N, TL-WR940N, L-WR842N, TL-WR2543ND). This is quite easy to do, no more difficult than on other routers. This instruction focused on different models TP-Link, because they have almost no differences between themselves.

If you purchased a device for yourself and plan to set it up without resorting to outside help, then you should understand that you will definitely need to get into the toolbar. Setting up such routers is quite simple, the main thing is to follow all the recommendations from our portal. Even if all the settings are made by a specialist, during the operation of the device, you will probably encounter the need to change certain settings.

Situations often arise when you need to change your Wi-Fi password, find out a password you forgot, or update the firmware. And in every such situation, turning to a specialist for help is not always convenient and unprofitable from an economic point of view. You can do this yourself, without the support of a professional. The whole procedure will take a couple of minutes.

Enter TP-Link settings: 192.168.1.1, or 192.168.0.1

Key milestones:

• After the modem has been connected to the network and the network cable has been inserted into the appropriate connectors connect with Wi-Fi router . This is done in two ways: directly WiFi networks or via cable(it is also possible to get to the settings menu even using tablet computer or a smartphone, but still more convenient to use for these purposes personal computer or laptop). Let's now look at 2 connection options, and each item in detail using pictures.

Logging into the TP-Link settings panel when connected via network cable

The network cables required for connection must come with the device. The router must be connected to both the computer and the provider's network. On the router, the connection is made to the LAN connector (usually yellow).

• Then launch any browser and navigate to one of the unique addresses 192.168.0.1 or 192.168.1.1 . or the address of the page on which it will be available (based on a certain model router). Indicate the exact address at the bottom of the router case. In our case, the following address is written:

• After this, you will need to enter a username and password. According to standard settings, at wired connection- This admin And admin.

• In our case, we log in to the address indicated on the sticker and enter the standard login and password. If you have already changed them, you should provide new data.

• You can also access the router admin panel via 192.168.0(1).1 . Login will occur in a similar way.

• Login to the settings panel of the tp-link router (tl-wr720n) has been successfully completed.

Go to the router settings via WI-FI. Connect to TP-LINK wirelessly with or without a password

• 1. If the router has already been configured and was set a password for the router(or simply known), then first you need to connect your modem to the broadcast network. To do this, click on the network icon, find your router and click “ Connect" and enter installed key(password). If Wi-Fi networks are not displayed, read the article.

Click next. A message will appear asking you to allow discovery of your computer within this network. Click " Yes", because as a result this network will be assigned to the one we need home group and there won't be possible problems in the future with connectivity.

After the network is connected and the password is entered into the browser line 192.168.1.1 or 192.168.0.1 (depending on the model) or to the address indicated on the router sticker (http) and go by pressing enter (example above in the pictures).

• 2. If you connecting for the first time(or you forgot your password and need to change it) , then in this case you can use 2 methods of connecting to the router (TP-LINK):

— As a password for the wireless network (in this case, if the modem is being configured for the first time, it will be called, for example: “TP-LINK_1234”) you can use the PIN indicated on the modem sticker. On the topic of inclusion wireless adapter and connections to WI-FI networks V .

— Or use a special system for connecting to a router via Wi-Fi without a password — WPS function. About what WPS is and how to use it in a separate article.