Water got under the sensor, what should I do? How to easily bring back to life a phone that has fallen into water

Hello friends, today I will try to tell you what to do if your phone falls into water. If your phone falls out of your pocket and lands in a puddle, or let’s say you somehow spilled tea or other drinks on it, you should act immediately. Of course, if your phone is protected from moisture, for example, like Galaxy S5, then there is nothing to worry about.

I myself now have a galaxy s5 and you know, I’m quite long time I was afraid to experiment and put it in water to check if it was really waterproof. When I was walking around the Internet, distributing the Internet to a laptop from my Galaxy, the phone suddenly became very hot, and I was wondering how to cool it. Then the thought occurred to me that the time had come. I poured cold water into the container and with grief lowered my phone in half, and of course everything went well, but after opening the back cover, there was still a little water there, I don’t experiment anymore. But let's get to the topic.

Let's say you don't have a waterproof phone. . What to do in this case?

Taking the phone out of the water

If you drop the device and find it in water, immediately remove it from there. Because liquid can very quickly and easily get into the phone body. A phone that remains in water for a long time has no chance of survival. But still he is there.

We take out SIM cards, flash drives, battery

To begin, remove the phone from the case, then disconnect back cover and remove the battery, then the SIM card and flash drive. At this time, under no circumstances don't turn on the phone, (although it won’t turn on without a battery :-)) it’s better not to do this. Also avoid clicking different keys on the phone to prevent further water from entering the case. If the device has plugs on the ports, open them to allow ventilation.

Wipe your phone

Take a dry absorbent cloth and start wiping everything you took out: battery, SIM card, SD card, wipe the inside of the phone. Do not leave anything inside, various pieces of paper or other debris. If there is still water in the case, try shaking it to get the water out, but don't overdo it, as the water may get deeper.

We disassemble the smartphone

If you have sufficient experience in disassembling phones, then go for it. Try to disassemble the device into the smallest possible parts. This is necessary for good air circulation and drying. But do not forget that when you disassemble the phone, you lose the warranty. Although the warranty does not cover the smartphone if it gets into water.

After disassembling the phone, wipe all parts again. But don't overdo it.

If you spill coffee, tea, juice or other drinks on the device, you should wash the parts on which water has spilled with distilled water and alcohol so that there are no traces or deposits left. Why do this exactly, we talked about in the article .

All these drinks contain chemical elements capable of destroying and oxidizing the surface of the phone’s internal circuit board.

Drying your phone

When all of the above is done, all that remains is to dry our smartphone. You can use a hairdryer, although it is not recommended. We also talked about this in this article about.

But, if you use a hair dryer at your own risk, then turn on the air flow a little warmer than room temperature and when drying, keep a decent distance. Best of all, put it to dry for several days in a place with good air circulation.

I also heard about this method that you can dry electrical appliances in rice. Because rice absorbs moisture well. The only downside is that the rice then becomes very saturated with moisture and absorbs less of it. Therefore, I had to change this rice very often. It is better to dry it with air, of course.

Assembly and performance test

After you have kept the device for 1-2 days, we assemble it and try to turn it on. First, check that all parts are dry and free of deposits. Try to turn on the phone first with the battery, then without, that is, from the network. If the phone works in both cases, then check the internal functionality. Perhaps it will be very buggy or some tabs will not work. If the phone works on mains power, but does not work on battery power, the battery may be damaged. And if it doesn’t turn on either way, but reacts to the USB input, then you should contact service center and tell them everything you did and what the phone bathed in the water.

I also had a case when I dropped my Galaxy Ace2 into the water, I don’t know why, but it simply fell out of my hands. This does not mean that I am crooked :-) . So, he was almost completely submerged in my water. But.. The cover saved me, water didn’t even get inside, but just in case, I dried it at home and everything worked fine. Here is such a case from my life.

Bottom line. You can save your phone, although not with a 100% guarantee, if something happens, follow these instructions. Better yet, just be careful and take precautions.

By the way, if you have laptop got liquid, you can read about this in .

Today, gadgets have become an integral part of the life of any person. Any purchase of a new smartphone makes us feel joy and happiness, and when the smartphone accidentally falls into water, beer or other liquid, we begin to panic and worry.

In today's article we will tell you what to do if your phone falls into water and what steps to take.

As you know, in most cases the phone can be saved, and the liquid environment has a significant influence on this. For example, if a phone is dropped into water with high alkalinity, the chances of success are minimal.

The best chance of successfully resuscitating a phone is when it falls into running water.

What to do if your phone falls into water Samsung, LG, Lenovo, Xiaomi, Meizu, iPhone, Sony, ZTE, Asus, Android?

So, let's look at how to save a phone that has fallen into water. Firstly, if touch phone falls into water, turn it off immediately. After turning off the phone, remove the battery, memory card and SIM card. This step will also prevent your phone from shorting out. If your phone comes with non-removable battery, then turn it off using the on/off button.

Figure 1. If your touch phone falls into water, remove the battery as quickly as possible.

These were the first steps to take if your touchscreen phone fell into water. Now you need to dry all the accessories and the smartphone; we will talk about ways to dry a smartphone below.

How to dry a touchscreen phone that has fallen into water?

It's worth noting that you should not use your phone, headphones, or your phone's USB port until all components are completely dry.

Below we will give ways to dry a phone that has fallen into water, beer or other liquid.

Method 1. How to dry a touch phone in rice if it fell into water or got water in it?

To dry the outside of your phone, you can use a paper towel or soft cotton cloth.

You can use dry rice to dry the inside of your phone. Take a medium sized bag, fill it with rice and put your phone in it. It is very important that the rice completely envelops the phone

Method 2. How to dry a touchscreen phone in silica gel if it fell into water or got water in it?

Besides rice, you can use silica gel to dry your phone. Silica gel bags are used in shoe boxes.

Method 3. How to dry a touchscreen phone on a battery if it fell into water or got water in it?

Many people will ask, is it possible to dry a phone on a battery? Definitely yes.

This is perhaps the easiest way to dry your phone, but still risky. For example, if you simply put all the phone's components on top of the battery, the battery may swell and need to be replaced. Thus, the telephone and battery It is best to wrap it in a towel or thick cloth.

Method 4. How to dry a touchscreen phone with a hairdryer if it has fallen into water or water has gotten into it?

Never try to dry your phone with a hairdryer. The reason for this is that the hair dryer blows hot air, which causes the circuits in the phone circuit board to melt.

How long should you dry your phone after falling into water?

In most cases, owners who drowned their phone note that their device worked properly after 3-7 days. Again, you need to consider how your phone fell into the water and how long it was there.

Frequently Asked Questions

What should you do if your phone falls into water and no longer charges or the battery does not work?

Surely you have noticed that after the phone fell into the water, it stopped charging or sometimes a notification appears that headphones were connected to the phone. This problem usually disappears after drying the phone for a long time.

Of course, one cannot deny the possibility that the connector for charging the phone has become unusable. But before you contact a smartphone repair service center, it is best for you to thoroughly dry your smartphone and try to charge it again.

Why doesn’t the screen or sensor of a phone that fell into water turn on?

After dropping your phone into water, the touch screen may not respond to your touch for a long time. The reason is that the sensor has many layers, and liquid got into one of them. In this case, you need to place the smartphone in a glove or wrap it in a scarf, and then place it on the battery. If the problem is not resolved within 2 weeks, then your only option is to contact the service center.

It happens that the phone can sometimes fall into the sink or, even worse, into the toilet. A mobile phone can be forgotten in a jeans pocket that has been loaded into the washing machine, and sometimes it can get damaged due to someone's prank, such as being pushed into a swimming pool without warning. Got caught in the rain without an umbrella? Dropped your phone in your pet's bowl? Most likely, you will have to buy a new one, but if you act quickly, there is still a chance to save your mobile phone. This article provides some useful tips on how to revive a wet phone.

Steps

The phone must be removed from the water as soon as possible. Ports speakerphone, the hole for the microphone, charging, USB cable, as well as the gaps between the phone and the plastic charging cover allow water to flow freely in a few seconds. The phone must be removed from the water and turned off immediately, as water that gets into it can lead to short circuit.

If the phone was in the water for only a few seconds, then there may be no consequences. Even if you wash your phone in a washing machine, there is still a chance to save it. Before you buy new phone, it is worth trying all the methods described in this article.

• If your phone falls into water while connected to charger, then removing it from the water yourself can be dangerous. This requires the help of a professional who will take the necessary measures and do it safely (most likely, you will need to turn off the electricity to the entire house). Water is an excellent conductor of electricity, so rescuing your phone yourself may result in an electric shock. However, if the phone was not connected to the charger, then you can remove it yourself - this should be done as soon as possible.
• Don't panic. If you remain calm, you will do everything quickly and correctly.

1. Immediately after removing the phone from the water, you need to wipe it with paper towels or a soft cloth, then remove the cover from the phone and remove the battery. This is one of the most important points in the case of saving the phone. Many circuits inside the phone are not affected by moisture unless they are connected to a power source (battery) when they get wet.

   • To find out if your phone has actually been damaged by water, you need to check the indicator in the corner of the battery hole. He looks like white square or a circle, perhaps with red lines. If it turns pink, this indicates that the phone is damaged by water.
   • To find out how to remove the battery and find the indicator, it is best to refer to the instructions that came with the phone.

2. Remove the SIM card. Some or all of your valuable contacts (along with other data) can be stored on the SIM card. For many, the safety of contacts is much more important than the safety of the phone itself.

   • SIM cards are quite resistant to water damage. However, it is worth removing it and wiping it dry, setting it aside and allowing time to dry until the phone itself is ready for use.

3. You need to turn everything off peripherals, such as headphones, memory cards, as well as anything that can clog gaps, crevices and cracks in the phone (cases and protective films).

   It is better to use a soft cloth or towel. If at least one If a drop of water remains inside, it may destroy the phone by corroding the circuits or causing a short circuit. You need to wipe off as much water as possible to prevent it from getting inside the phone:

   • Gently wipe off any remaining water from the outside. There is no need to shake or turn the phone over to prevent water from getting inside it.
   • When using towels - paper or not, you need to make sure that lint or wet paper does not clog small gaps and holes in the phone. Gently dry your phone, removing as much water as possible.
   • Rubbing water with alcohol helps the water evaporate quickly from the surface of the phone.

4. Use a vacuum cleaner. If you have a vacuum cleaner on hand, use it to blow out the water. To remove residual moisture, you need to blow off each part of the phone for 20 minutes.

   • This is the most quick method, which allows you to completely dry your phone in just thirty minutes. However, if contact with water was enough long, then this method is unlikely to help.
   • You should not bring your phone too close to the vacuum cleaner hose, otherwise static electricity will form, which is even worse for the phone.

5. Do not use a hair dryer to dry your phone. It may seem surprising, but use a hair dryer Not recommended (even not in the “gentle” mode). Using a hairdryer can blow moisture from the surface further into the phone, this is especially dangerous for electrical components hidden deep inside the phone. And if the air from the hair dryer is too hot, then its jet can melt some parts of the phone.

   • If moisture gets inside the phone, the chance of corrosion increases. individual elements and their oxidation, circuits that contain minerals are especially at risk. Ultimately, this may cause your phone to malfunction.
   • There is no need to blow air into the phone; on the contrary, a stream of air should blow out the water. From Bernoulli's law it follows that warm dry air, moving quickly over the phone, reduces static pressure compressed air, which will not allow you to blow all the moisture out of the phone. The main conclusion that follows from this is that you can spend several hours in a row trying to dry your phone with a hairdryer and not achieve the desired result.

6. Use a substance that can draw out moisture. An inexpensive option is to place the phone in a bowl or bag of uncooked rice overnight. The rice will absorb any remaining moisture.

   • Effectively use products that absorb moisture. One of the best means- this is rice. You need to place the phone in a plastic bag and fill it with rice, then to create an airtight seal, the bag needs to be sealed (you can use a plastic container). Also included in materials that absorb moisture is silicone gel - often found in small bags in a box with new shoes, handbags, and so on. At the same time, those bags that have been stored in boxes with shoes or clothes for some time have probably already exhausted their absorbent properties. The phone should be left in the desiccant container at least overnight.
   • While the phone is drying, you need to turn it over from time to time so that the water that inevitably flows down has a better chance of finding its way out of the phone through all sorts of cracks and holes.

7. Place the phone in a sunny place to allow all openings of the phone to dry completely.

   The phone should be left on absorbent wipes or paper towels, even if it has previously been vacuum-dried or placed in a container of rice. This will help absorb any remaining moisture from the device.

   • It is worth checking the phone, placed in a container with absorbent material, every hour for the first 6 hours. If moisture has collected on the surface, you need to dry it again with paper towels or blow it with a vacuum cleaner.

8. Phone check. After at least 24 hours, make sure that the external appearance of the mobile phone is dry. It's worth checking all the ports, compartments and slots. If your phone looks dry and clean, you can replace the battery and try turning it on. Please note possible strange sounds and noises accompanying the switching process, if any, then this is a sign that the phone is not functioning properly.

   If the phone looks dry, but does not turn on, then it is possible that the battery has run out. If the phone turned on after it was charged, then the battery was probably damaged by water and should be replaced.

   If connecting to the charger also did not help turn on the phone, then you should contact the place where it was purchased. Perhaps specialists can repair it. But there is no need to hide the fact that it was damaged by water - the phone still has indicators that show the cause of the malfunction. The more detailed the circumstances are, the easier it will be for specialists to identify the breakdown and fix it.

9. Do not try to disassemble the phone yourself. Leave this to the professionals, as such experiments can lead to short circuits or poisoning from harmful chemicals contained in some elements mobile phone.

   • If the phone turns on, but does not work properly, then it is likely that moisture has damaged some elements. Remove all covers, battery, memory cards and SIM card– you may find corrosion. Then it needs to be cleaned off the surface of the affected parts using a clean, dry brush or toothbrush. There are many instructions on YouTube on how to do this correctly.

10. Buy a protective phone case. This case will protect your phone from damage during falls, as well as from water ingress. For touch screen phones, a protective film is a must!

    • Moisture is primarily dangerous for the internal circuits of the phone. If you manage to turn off your phone before the water reaches them, then most likely you will be able to save it!
    • Sometimes in stores you can find kits designed to resuscitate a wet cell phone. It is better to purchase one in advance so as not to waste time when an emergency occurs.
    • If the phone has been damaged by salt water (for example, dropped into the sea or ocean), then it is necessary to wipe it with clean water so that salt crystals at least do not remain in the battery connector.
    • Never vacuum a wet object. You may get an electric shock.
    • Excessive heat may damage your phone. Most phone instructions warn against leaving the device in a car in the summer or exposing it to any other heat. The most important thing is to dry your phone before charging it. Using a vacuum cleaner, you can dry your phone in just 20 minutes; you need to blow air from all sides of the phone, constantly turning it.
    • You can use a vacuum chamber if you can find one, for example in schools and universities. Of course, it is unlikely that everyone can use the training equipment, so arrangements will need to be made first. In such a chamber, water will “boil” even at room temperature after sufficient time has passed, and therefore will evaporate, even if it is not heated. This method will work if you keep the phone in the camera for at least 30 minutes. This way, those parts that are difficult to access will also dry out.
    • Since in this case the phone cannot be repaired under warranty, you can try to disassemble it into parts to dry them more efficiently. Buy special screwdrivers and prepare a dry, clean toothbrush. Spray all parts with compressed air, and/or vacuum cleaner for a few minutes, and then put the phone back together.
    • It is very important to continue to dry your phone from time to time, even if it seems that it is already quite dry. This is wrong. Placing your phone in front of a running heater or fan for an extended period of time will help dry it more efficiently. You need to overcome the desire to use your phone to check calls, messages or just play. It should be left alone to dry for several hours.
    • Alcohol treatment of the phone is useful - you need to remove all parts (battery, SIM cards, etc.) and put the phone face down in a container with a small amount of alcohol. This won't damage your phone, but will help dry it out and evaporate moisture.
    • Another option is to keep the phone at body temperature for several hours. That is... closer to the body.
    • Take your phone with you if you plan to fly on an airplane. Very dry interior air is great for drying your phone.
    • When using compressed air, direct the jet Not at a right angle, and with some inclination, and aim at the cracks, connectors and gaps. If the phone is cold, then it needs to be warmed up, since cold air can create excess moisture, which condenses on the elements inside. This process must be accompanied by other methods, that is, the use of a vacuum chamber or vacuum cleaner. Follow all instructions on the compressed air container label as the contents may be toxic.
    • When placing your phone in rice, you should remove the cover, take out the battery, and put them in the same container, but separately.

    Warnings

    • Do not expose your phone to prolonged heat if you do not want its individual elements to melt.
    • Remember that the manufacturers of most modern cell phones include a water damage indicator that changes color depending on the presence of liquid inside the phone. This helps determine the cause of the phone breakdown, because if the phone does not work due to being in water, They will refuse to repair it under warranty. An exception may be additional insurance phone from exposure to water. It is worth noting that damage indicators only change color in very high humidity conditions.
    • Do not place your phone (or any other electronic or metal-containing object) in a microwave oven. This will damage not only the phone, but also the microwave.
    • Do not heat the battery; it may leak or explode. Lithium-ion batteries sensitive. If you use a hair dryer, be sure to remove the battery before drying your phone.
    • If you use alcohol, be sure to do it outside. However, you should not apply heat in any form to the phone. Do not insert the battery until the smell of alcohol has completely disappeared.
    • Even if the phone was dried, the water could have time to damage the internal elements, subjecting them to corrosion. The phone's components are located so compactly inside the phone that even one drop of water is enough to cause a short circuit.
    • To dry your phone, you need to disassemble it as much as possible. Cell phones, as a rule, are waterproof, so they can be used during light rain. But on the other hand, this means that water, once inside the phone, has little chance of finding its way out of the phone.
    • The faster it is removed from the water and turned off, the higher the chance of saving your phone.
    • Do not leave your phone wet for a long period of time. Dry it as soon as possible.
    • Do not turn on your phone until you are sure it is dry. This may cause a short circuit.

    What you will need

    • Materials that absorb moisture (rice or packets of balls, such as those found in new shoe boxes, noodle packages, etc.)
    • Towels, paper towels
    • Vacuum cleaner
    • Bowl
    • Sealed bag or container (optional)
    • Cotton fabric

When using any phone, an unforeseen nuisance such as water getting into a mobile phone can always happen. Unfortunately, this can happen to each of us, no matter how careful a person is, but your phone can also end up in water.

Firstly, how can get your mobile phone out of the water faster. The longer it sits in water, the more difficult it is to restore it; the faster you can get it out, the less damage the leaked liquid can cause. So, if you suddenly dropped your phone into a container of water for a couple of seconds, most likely nothing will happen to it, but if it lay in the water for an hour or more in the drum washing machine, then at least complete disassembly and drying cannot be avoided

Immediately upon removal from water turn off the power of the mobile phone or smartphone. Please note that if a smartphone removed from the water is still working, this does not indicate the extent and severity of its possible damage.

Pull out the battery and if possible, disassemble the phone. The battery must be disconnected immediately, otherwise a problem may occur in the phone circuit. short circuit and This device doesn’t need a lot of electronics to fail.

Remove all SIM cards from the device. If you store phone numbers on them, and not in the memory of your mobile phone, removing the SIM card will help save your contacts. How longer sim card be in liquid and remain wet, the higher the risk of damage.

If your phone gets wet or is completely submerged in water, then all the moisture will evaporate from it for quite some time. You will have to dry it for at least a day, and preferably three days. It would be the right decision to disassemble the device as much as possible, ideally remove the board, if you cannot do this, then at least remove the case and cover of the battery while drying, and of course we do not install the battery itself until the end of drying.

Do not try to turn on your mobile phone until it has dried out.- making sure that it works, you can ruin it. The mobile phone should dry for at least a day, but it is better to dry it for several days, it will be much more correct.

What to do if the phone has been in water for more than 30 seconds?. You can minimize the consequences by lowering it into a glass of alcohol; the latter simply displaces the water and evaporates quite quickly. Of course, before doing this, you should turn off the phone and remove the battery. In cheap Chinese phones and fakes, the inscriptions may come off after this, so use this folk method at your own peril and risk.

If you cannot or do not want to disassemble the recessed phone, then you can dry it in a container with rice, rice perfectly absorbs moisture and will help dry the phone faster, if you find silica gel, it will be even better. It is important that the phone is dry from the inside, and a hair dryer or dryer will not help with this, since they only dry the outer parts without penetrating the inside. Leave the phone in a jar of rice for several days, only then you can connect the battery and try to turn it on.

If you are able to disassemble the phone yourself and then put it back together correctly (by the way, the service instructions for disassembling the phone can help you with this), then you can clean and dry the phone immediately after taking it out of the water. Wipe the board with alcohol or at least a dry cotton swab. Then lay the parts on napkins and leave to dry for 5-6 hours, or dry them with a hairdryer. In the case of a disassembled mobile phone, a hair dryer may well help. When the parts are dry, assemble the mobile phone and check it.

Even rescue measures taken in time, in case of serious flooding, when the phone has been in the water for a long time, do not guarantee that the oxidation process on the circuit boards will not begin, and the water will not remain under the microassemblies. In addition, even evaporated water will leave behind salts, unless you drowned your gadget in distilled water, which is very unlikely. And if this oxidation process has begun, then the loss of full or partial performance is a matter of time.

And only complete disassembly devices and cleaning in an ultrasonic bath can save it with almost 100% probability.

Everything is the same as above, but remember that a touch phone or smartphone does not like to overheat, so you should not heat the phone to dry it with a hairdryer or place it on the battery. IN in this case the best option, after being in the water, you will leave the disassembled smartphone in a warm, dry place for a day or two.

Having opened the device and not finding any noticeable problems, on the advice of a good friend I decided to unsolder the power controller and see what was happening under it.

The worst case scenario is that water gets into the touch screen - when you turn it on, streaks will most likely appear on it. It is no longer possible to restore such a display, and replacement is not cost-effective, although if you are able to do it yourself there is little point in it.

The worst case scenario is when touch display ends up in salty sea water. The salts it contains are extremely aggressive to the sensor, but also to various contacts and copper connections on the motherboard phone and can lead to very rapid corrosion. In this case, you will hardly be able to sell the phone even for spare parts.

By the way, to conclude this topic, I would like to add that repair of a smartphone under warranty in this case is not carried out, because a wet mobile phone is not a breakdown, but improper operation.

I think absolutely everyone wants a new mobile phone to serve us for a long time and have excellent appearance. To protect the display of a mobile phone or smartphone from various scratches and cracks, it is recommended to use a special protective film on the mobile phone screen. Let's take a step-by-step look at how to stick a film on a phone. True, it will not protect your mobile phone from prolonged exposure to water.

I was prompted to write this article. large number calls to our service center with the questions “My phone fell into the water, what should I do?”, “How much will it cost to repair a sunken phone?”, “My phone got wet, it worked right away, then stopped turning on,” or “We washed the phone in washing machine, the phone won’t turn on, can it be repaired?” or “The phone got caught in the rain and got wet, now it doesn’t work,” etc.

What to do first?

1. The first step is to remove the battery from the phone and do not insert it for at least a day. Oddly enough, it’s not just water that kills the elements inside the phone, but electric current, which oxidizes the elements inside and disables the radioelements and the device board.
2. Second thing the phone needs to dry inside. But based on practice, I will tell you that liquid gets inside the phone very quickly, but it can dry for a very long time, not just one day. And even if all the liquid dries inside, there are still salts dissolved in the water, which corrode the radio elements when the phone is operating, since salts are conductors of electric current.
3. Therefore, I recommend the third step in saving your phone after moisture gets into it: contact, and it’s better not to hesitate, the sooner you do it, the cheaper the repair will cost, and perhaps just preventive maintenance of the phone’s elements will be enough.

But it's not always so easy. Let's say they dropped it in water iPhone, but the battery in it is not so easy to get out without disassembling the device. In this case, if you cannot contact the service center as soon as possible, I advise put iPhone in rice(just don’t laugh, but it really helps! the most ordinary food rice, at first I didn’t believe it, but after people brought in sunken iPhones dried in rice, during repairs it was really clear that the effects of moisture were minimal). The photo shows the board of a recessed iPhone 4, which was placed in rice and then brought to the service center. The board was perfectly clean, the only thing oxidized was the connector touch screen(marked with a red circle). The red diamond shows an indicator that liquid has entered the iPhone.

What can happen to the phone after getting water?

The most harmless case is when the phone is dropped into water, it continues to work, but there are water stains on the screen. It doesn’t seem to be a big deal, but it looks unpleasant, especially against a light background. The only way out of this situation is. Even after the water has dried, traces of it still remain, and it is impossible to remove them from the old screen, since the display contains several layers of film that diffuse the backlight, and it is unrealistic to disassemble them without damaging them.

The worst case is when water that gets into the phone oxidizes the radio elements and disables them. The degree of oxidation depends on the time the phone was in the water, on the amount of liquid that got inside, on whether the battery was immediately pulled out of the submerged phone or after some time. If you do not immediately take action after liquid gets into your phone, then it will end up with approximately the same thing as the phone in the photo on the right. The elements oxidize, the salts corrode the phone parts, and the recessed phone becomes unusable for repair.

The last picture shows the board of a phone that fell into the water and the battery was not immediately removed from it. The phone worked for a while, then turned off and won't turn on again. Yes, it won’t turn on anymore, the phone cannot be repaired, since many of the radio elements inside have simply rotted. In this case, it is necessary to completely change the circuit board on the phone, which is usually comparable in cost to the price of a used phone of the same model. Therefore, to avoid this and extend the life of your phone after liquid gets into it, immediately take the measures that I wrote about at the beginning of the article.