Download a fan for your computer with Russian settings. SpeedFan utility: how to use, description. Software
Program version: 4.52
Official website: almico.com
Interface language: Russian, English and others
Treatment: not required
System Requirements:
Description: SpeedFan - a utility for monitoring the motherboard - temperature, voltage, fan speed, as well as temperature hard drives(if they support this feature). An extremely positive feature of SpeedFan, which distinguishes this program from similar ones, is the ability to change the fan speed, including depending on the temperature inside system unit.
- The program is a compact but very functional tool for monitoring computer hardware. Allows you to read voltages, fan speeds and temperatures from monitoring chips. Displays data on the status of S.M.A.R.T. parameters, as well as temperatures for drives on hard drives. Works with HDD on EIDE, SATA and SCSI interfaces (most “software” IDE/SATA RAID controllers, unfortunately, are not supported). It is also possible to adjust the system bus frequencies on some motherboards, but development in this direction is virtually frozen. Works in the environment operating systems Windows 9x, ME, NT, 2000, 2003, HP, Vista and 7, as well as x64.
- The main highlight of the program is the adjustment of fan speed depending on conditions (for example, processor temperature), but again, with hardware support from the equipment. In addition, it can collect statistics on measured parameters and write information to a log file, draw graphs of changes in temperatures, voltages and fan speeds. View lists of supported sensors, motherboards that allow you to change fan speeds, and hard drives can be found on the official website.
- Support SMART technologies.
- Ability to specify temperature and voltage boundary conditions. In this case, the following program actions are possible: launch external program, displaying a message, sound warning, sending a message via email.
- Ability to change system bus frequencies on some motherboards equipped with frequency generators supported by the program.
- Statistics of the parameters taken and writes them to the log.
- Graphs of changes in temperatures, voltages and fan speeds.
- Works with HDDs on EIDE, SATA and SCSI interfaces.
- Conducts web analysis hard conditions disks according to data from S.M.A.R.T. using the online database.
- added full IPMI support
- added full support for IT IT8771E
- added full support for Intel Sunrise Point (Z170) SMBus
- added full support for STMicro STTS2004
- added full support for NCT6793D
- added full support for Giantec GT34TS04 and GT34TS02
- added support for Atom E3800 SMBus
- added support for Atom C2000 SMBus
- added support for Fintek F71878A/F71868A at non standard addresses
- enabled SMBus on Intel 6 Series / C20x, if needed
- fixed SCSI_PASS_THROUGH access on some systems
- skipped accessing those hard disks that return the ID Sector from another disk
- fixed Nuvoton NCT6791D and NCT6792D sixth fan readings
- added support for alternate registers of NCT6793D
- fixed German translation for CPU Usage
Screenshots:
SpeedFan is a free and easy-to-use tool for monitoring temperature and fan speed, with the ability to control them. How to use SpeedFan? If you need to monitor the readings of sensors on your motherboard, hard drives or video card for gaming or for other reasons, then you should download SpeedFan for free in the Russian version on your computer. Moreover, with the help of this utility you can not only get necessary information, but also somehow affect the performance. For example, by regulating the rotation speed of fans installed in the system.
Thus, depending on the temperature shown by the sensors, you can increase the operation of the fans, thereby lowering the temperature to the desired parameters.
The SpeedFan utility also keeps statistics of all measured parameters so that you can analyze your system data.
Functional
The SpeedFan utility can:
- control the operation of coolers. Moreover, the adjustment can be either manual or automatic;
- provide information about the processor (its family, name, brand, thread or model);
- indicate the boundary voltage and temperature conditions at which a warning may occur;
- change the system bus frequency;
- display a graph of changes in fan speeds, temperatures and voltages;
- analyze using data from S.M.A.R.T. condition of hard drives.
Thus, many gamers prefer to use SpeedFan and download it for free for Windows 10, 8, 7. However, not only this category of users may need this utility. After all, many professional programs are sensitive to temperature and voltage readings.
What is captivating is that the utility works with almost all monitoring chips, which means that you just need to ask required parameters so that the system can adjust its operation.
For example, if temperature sensors showed borderline criteria, then in this case automatic mode fan rotation speed changes. As a result, the temperature parameters are restored to the required limits.
The software records all data in a log file, but there is an option to display it in the form of a graph.
You can download SpeedFan for free, especially since the latest versions are optimized with the tenth version of the operating system Windows systems and use one of best programs. There is also support for XP and Vista.
The presence of a Russified interface is an additional plus for this software.
Advantages
The utility can:
- accurately measure the speed, temperature, voltage of computer components,
- adjust the frequency,
- control the temperature process,
- monitor optimal PC operating modes,
- compare your performance hard drive with a database of components from manufacturers,
- change the system bus frequency,
- regulate cooler rotation.
Flaws
If you have already downloaded the Russian version of SpeedFan for free, then you should know that sometimes when adjusting the cooler, some malfunctions occur in the computer.
Interface
Once you have downloaded and installed the utility, you will be able to immediately retrieve a series of data from your system. For example, you will see the temperature of the central microprocessor, graphical statistics on the temperature and speed of the cooler. Moreover, in order to influence the latter, you can choose two modes: manual or automatic.
Thanks to SMART technology, the cooler rotation speed changes, which depends on the heating of the equipment.
If you need overclocking of devices or maximum cooling, then it is better to use manual mode.
They also often slow down the cooler if it is necessary to reduce the noise level.
Rating: 4,4 Votes: 128SpeedFan is a good set of functions for monitoring and managing some PC performance. In particular, this software product allows you to monitor the temperature indicators of the processor, power supply, system unit, hard drive, etc., provided that there are appropriate tracking sensors on the computer components. However, the main function of the SpeedFan program is to regulate the rotation speed of coolers depending on the corresponding temperatures, which allows you to reduce power consumption and background noise during low use of computer resources. In this case, adjustment is possible both automatically and manual mode. Another function of SpeedFan is the ability to automatically regulate the frequencies (cycles) of the internal processor bus and PCI buses(but this should be considered a bonus).
Key features of the SpeedFan program:
– Fan speed control.– Implemented support for SMART technology.
– The user is given the opportunity, at his own discretion, to specify the temperature and voltage limits. In this case, you can set options for the program's action when these limits are reached: launching an external program, displaying a message, sound warning, sending a message by e-mail.
– Changing the system bus frequencies on motherboards equipped with frequency generators supported by the program.
– Statistics of the parameters taken and recording them in the log.
– Plotting graphs of changes in temperatures, voltages and fan speeds.
– Support for working with HDDs on EIDE, SATA and SCSI interfaces.
– Conducts a web analysis of the status of hard drives using data from S.M.A.R.T. using the online database.
Russification of the SpeedFan program:
1. Install the SpeedFan program and run it.2. In the main window (Readings), click on the Configure button, select the Options tab, enter the Language selection list and select Russian.
3. Now SpeedFan will be in Russian!
Latest changes
Changes and additions in the latest version of the SpeedFan 4.52 rus program:
- Added full IPMI support.
- Added full support for IT IT8771E.
- Added full support for Intel Sunrise Point (Z170) SMBus.
- Added full support for STMicro STTS2004.
- Added full support for NCT6793D.
- Added full support for Giantec GT34TS04 and GT34TS02.
- Added support for Atom E3800 SMBus.
- Added support for Atom C2000 SMBus.
- Added support for Fintek F71878A / F71868A on non-standard addresses.
- Enabled SMBus mode on Intel 6 Series/C20x, if necessary.
- Fixed SCSI_PASS_THROUGH access on some systems.
- Fixed readings of the sixth fan Nuvoton NCT6791D and NCT6792D
- Added support for NCT6793D alternative registers
- Errors found in previous version SpeedFan 4.51.
Technical data
| Program logo: | |
| Program name: | |
| Program version: | 4.52 |
| Update date: | 24-05-2017 |
| Windows version: | Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10 |
| Language: | Russian |
| License: | Freeware |
| Developer's website: |
SpeedFan is a tool for managing coolers connected to a computer; used to monitor system temperature. Among other things, the program allows you to monitor overheating of the processor, video chip or hard drive. Supports almost all chips to track system performance.
SpeedFan is a worthy replacement standard means computer cooling control. Graphs are supported that display the current fan operating frequency, their speed and voltage. On some motherboards, the program allows you to adjust the system bus speed. The utility must be used with extreme caution to prevent overheating of the processor or GPU.
Advantages:
- Supports a large number of boards from different manufacturers.
- Recording all received information in a separate log file.
- Possibility of dynamic change.
Flaws:
- Doesn't see coolers on older motherboards that don't allow you to disable the system cooling control.
- On some computers it only works when connecting fans with a 3-pin plug.
Download latest version SpeedFan programs are also available from the official
Program information
Name: SpeedFan
Interface language: Russian
Treatment: Not required
Version: 4.47
System Requirements:
- Operating system: Windows XP, Windows 7/8/10
Description:
SpeedFan is a utility for monitoring the motherboard - temperature, voltage, fan speed, as well as the temperature of hard drives (if they support this function). An extremely positive feature of SpeedFan, which distinguishes this program from similar ones, is the ability to change the fan speed, including depending on the temperature inside the system unit.
The program is a compact but very functional tool for monitoring computer hardware. Allows you to read voltages, fan speeds and temperatures from monitoring chips. Displays data on the status of C.M.A.R.T. parameters, as well as temperatures for hard drives. Works with HDD on EIDE, SATA and SCSI interfaces (most “software” IDE/SATA RAID controllers, unfortunately, are not supported). It is also possible to adjust the system bus frequencies on some motherboards, but development in this direction is virtually frozen. Works in the operating systems Windows 9x, ME, NT, 2000, 2003, HP, Vista and 7, as well as x64.
The main highlight of the program is the adjustment of fan speed depending on conditions (for example, processor temperature), but again, with hardware support from the equipment. In addition, it can collect statistics on measured parameters and write information to a log file, draw graphs of changes in temperatures, voltages and fan speeds. You can view the lists of supported sensors, motherboards that allow you to change fan speeds, and hard drives on the official website.
SMART technology support.
-Ability to specify temperature and voltage boundary conditions. In this case, the following program actions are possible: launching an external program, displaying a message, sound warning, sending a message by e-mail.
-Ability to change system bus frequencies on some motherboards equipped with frequency generators supported by the program.
-Statistics of the parameters taken and writes them to the log.
-Graphs of changes in temperatures, voltages and fan speeds.
-Works with HDD on EIDE, SATA and SCSI interfaces.
-Conducts a web analysis of the status of hard drives using data from S.M.A.R.T. using the online database.
Users often encounter a problem when SpeedFan program does not see one cooler on the PC, or does not see the processor cooling fan on the laptop at all. What to do first in this case:
1.
If the problem is on the PC, then be sure to check that all fans are turned on directly to the motherboard, since if you supply power directly from the power supply, then you will not be able to programmatically control the speeds.
2.
If you are using a laptop, then in Bios look for items related to automatic adjustment fans. You need to look for CPU Fan Control, CPU Q-Fan Control or even CPU Smart Fan Control and disable them by setting them to Disabled.
After these steps, the problem when the SpeedFan program does not see the fan on the laptop will be solved. And also, there are very old motherboards, which do not support changing the fan speed at all.