Universal driver for HP printers and MFPs. HP PCs - Downloading or Updating Software and Drivers

For full-fledged work printer, you need to install additional software - drivers. Usually, they are bundled with the device, on a special boot disk. Without them, the computer will not detect the connected device. Of course, we are not talking about devices that are automatically recognized by the system. I would like to note right away that you need to read the article in full, as there are complex and more simple ways installing drivers and therefore you need to read the article to the end. Almost at the very end of the article there is information on how to install the printer driver automatically, keep this in mind. When the question arises, how to install a printer without a disk, then inexperienced users think it's very difficult. But in fact, this procedure can be mastered in 15-30 minutes. Let's check if this is the case.

There are two main ways to install the printer without boot disk, namely, download required drivers from the Internet

• Using basic Windows tools update;
• Independently, knowing the identification code of the device or using the printer model.

The first method is perfect for simple models printers (only printing and scanning documents, without additional settings), because windows update establishes basic package drivers.

The second method allows you to download the most latest version Software, so after installing them, the user will have access to absolutely all printer functions, including more “advanced” ones.

In addition, the reason for installing drivers can be not only their complete absence, but also a malfunction of the device itself. Sometimes, using one or another driver, the printer refuses to print documents, and all because the driver you installed was not suitable for your device. This, of course, is one of the reasons why the printer may not work correctly, but as you understand, we are not talking about this for nothing right now. After all, further we will tell you how to download your driver to your computer, but if you are in a hurry, you may have difficulties. So take it step by step.

If you have previously studied this issue somewhere and none of the methods was successful, then you can try reloading the drivers. This article is universal - here we will tell you how to do it in different versions Windows.

Therefore, before installing a printer without a disk, you must:

1. Disconnect the device connected to the computer;

2. Go to the "Start" menu - "Control Panel" - "Devices and Printers" or "View Devices and Printers";

3. Here you will need to find the line "Installing a printer" or "Adding a printer" in the top panel;

4. The Add Printer Wizard will open, from the options provided, select Add local printer” and click “next” (for Windows 7). If you have Windows 8 or 10, then at the bottom click "The required printer is not listed" - and then select "Add local or network printer with manual settings" and click "Next".

5. The Add Printers and Other Equipment Wizard will prompt you to select a port, leave the default settings (LPT1) and proceed to the next step;

6. Click on the "Center windows updates» and wait for available drivers to be updated;

7. A list of printer manufacturers and main models will be loaded. May take 5 to 30 minutes. Find the manufacturer on the left and the printer model on the right. Then click "Next". IN this case we chose the HP brand and the LaserJet 1022 model.

8. The installation wizard will prompt you to come up with a name for the device (leave the default name or come up with your own), click "Next";

9. Wait for the installation to complete;

10. The "Using general parameters", here you need to select the option" No public access to this printer" and click "Next" (the window will appear if Windows 7 is installed). If you have Windows 10, then you will see a window where you need to click "Finish" (the same window will appear later in Windows 7).

The next thing to do is delete just installed device. To do this, click on the printer icon that appears with the right mouse button and in context menu select "Remove Device" installed drivers will remain).

After the done actions, it will be possible to connect the printer to the computer. When you connect the printer, you need to wait a bit for the computer to automatically recognize the printer and complete the installation. After that, you can print any document to make sure the driver is installed.

How to do it in Windows 7:

Official sites

If you do not have a disk with printer drivers, you can download them from the official website of the manufacturer. To do this, it is enough to know the company and model of the printer. You can find them in the documentation, on the case or on the back of the device. If you do not understand the instructions below, you can download the required driver on our website without any fear (all drivers are virus-free).

Open any browser and in the search bar enter: “Download HP LaserJet p1102 printer driver”. In this article, I will look for drivers for the aforementioned device, but you need to specify your model.

As a rule, the link to the official website of the developer will be on the first page of the search, at the very top. But it doesn't always happen, so you have to be careful. In order not to download malware instead of drivers, make sure that you actually go to the official website of the developer. To do this, pay attention to the link of the site in the search engine. There should be nothing “extra” (the address will be something like this: “hp.com” or “samsung.com”, etc.

If you doubt the authenticity of the site you found, you can enter only the name of the printer company without the model and other information. And already with home page go to the "drivers and other software" section.

Benefits of downloading drivers from the official website:

1. Security (availability digital signature drivers, no embedded malicious code);
2. The developer places only the latest, "fresh" versions of drivers on the site.

Once you get to desired page(“Drivers and other files”, “Software”, “Software”, “Download”, and also “drivers” on the English version of the site), you will only have to enter your printer model and search.

In addition, some sites allow automatic mode determine the device model and required drivers, for example, there may be a button "Detect product". So, if we are on the HP website, we click "Product Search" and in our case, varieties of this model appear. We need to choose desired model by clicking the left mouse button.

After they find required drivers, you will need to specify information about the version of your operating system, the bit depth of the system. If this window does not appear, then simply click on the link or button to download the drivers.

There may also be such a situation that the site will offer to download the version of the drivers to choose from:

1. Basic - to access the main features of the device;
2. Extended - to access additional features.

You do not need to worry about which version you are downloading, the main thing is to specify the correct bit depth of your system (discussed above).

When the download is complete, run the downloaded file and follow the installation wizard instructions.

windows update

The Windows operating system by default contains all the main drivers for the most popular peripherals. Including printers and scanners. To do this, connect your device to your computer and wait a few minutes. If an attempt automatic installation printer is not positive, you must do the following:

1. Open the "Control Panel";

2. Find "Hardware and Sound";

3. Left-click on "Devices and Printers";

4. A new window will appear with icons of connected devices. Find an image of a computer or laptop (in my case it's a laptop) and right-click on it. In the context menu that opens, click on the line "Windows Update".

5. After that, a window will open, where in the menu on the right you need to click "Check for updates". Gotta start automatic search available updates for all your devices. Must tell you what it is desirable to have fast internet as this procedure may take 10-30 minutes.

6. Now you need to wait until Windows downloads the updates found in automatic mode;

7. After the search is completed and all the updates found are downloaded and installed on your computer or laptop, you must restart the device.

After restarting the computer, the printer should work. If after restarting the computer still does not see the device, the root of the problem may not be in the drivers. Try connecting the printer to a different USB input.

Finding the Printer ID

Each device that connects to a computer has a unique identification code. If you know the hardware ID, then you can easily download the driver you need. If the above instructions did not help you, and you did not understand, how to install printer without disk, you need to know its identification code. I recommend using this option in the most extreme cases, and if you downloaded the drivers from the official site, then you can skip this option.

So, to find out the ID:

1. Right-click on the computer and select "Properties", then click "Device Manager" on the left;

2. In the window that opens, find your printer. Right-click on the desired line and in the menu that appears, click on "Properties";

3. A dialog box will open where you need to go to the "Details" tab. Next, in the "Property" line, select "Hardware ID".

4. A value will appear in the window below, which will be the identification code of the printer (if there are several values, then you must select the first one);

5. Copy the ID. Go to the official website of your printer manufacturer and search for the copied an identification number. You can also use search engines to find the driver you need using the hardware ID. But do not forget that our website has all the drivers for existing printers. It remains only to download the found driver.

Remember that you need to download drivers only from official resources. It is absolutely free and extremely secure.

Installing Drivers Automatically

To this problem never bothered again and drivers for any external devices installed automatically, it is enough to change the basic Windows settings. For this:

1. Go back to the "Devices and Printers" menu (see above how to get here) through the control panel. Right-click on the "Computer" icon and select "Device installation settings" in the context menu that appears;

2. A dialog box will open, where you must select "Yes (recommended)" (recommended default settings) and click "Save";

Now, after connecting a new Windows devices will automatically search for and install the necessary drivers from own base or using an internet connection.

Installing HP printers is usually no different than installing printers from other brands, but setting them up is often difficult for many users. To simplify the setup, use our recommendations.

We'll look at how to properly connect an HP printer and how to install basic printer drivers without a disc. This instruction suitable for many modern models HP. The setting will be made for Windows 7. Note that it is also suitable for more early versions Windows operating systems.

Connecting and setting up an HP printer

In order to connect the printer, you need to use a USB cable: just connect the USB cable between the printer's input and the computer's USB port. The computer will detect the connected device automatically. Next, you will need to configure it.

1. Press the power button on your printer. You need to make sure that the other lights on your printer are off.
2. First you need to download the driver. You will see a search bar where you can enter the name of your printer model.
3. Next, you will need to select your operating system. Click the "Next" button and go to the selection menu software.
4. Since you need a basic driver, click the "Basic Driver" button. You will be taken to the download page. Click the "Download" button and wait for the program to download. After the driver download is complete, you need to install it.
5. To do this, click on the driver icon, and the installation will start automatically. Pay attention to the message that you need to disconnect the cable before installing the driver. This is necessary for the correct installation of the driver.
6. Driver installation consists of eight steps. Once the seventh step is completed, the installer will ask you to connect the USB cable.
7. Connect the printer to your computer and wait for the installation to complete.
8. Once the installation is complete, you will need to click "Set Up Printer". The setup wizard will do everything automatically.

Please note that this driver only allows you to use the basic functions of your printer, such as printing, scaling and printing multiple images. In order to use other features of your printer, you will need to download other drivers. You can do this, again, on the HP website (the link is given above) in the software selection menu.

In particular, you may need fully functional software. Pay attention to the paragraph "Important notes on working with the operating Windows system XP. We do not recommend downloading drivers from third party websites as they may damage your printer and even malware. Also, we do not recommend downloading the so-called printer firmware, which is designed to "help" the user bypass the printer's protection system from unlicensed software.

Possible printer installation problems

Some users experience printer malfunction after installing the basic driver. If you experience these problems, you should contact HP support using the link above. Go to the "Frequently Asked Questions" section. There you will find the model of your printer and the problems that you might have with it.

If you cannot find the printer model you need, contact the company's specialists. You can also refer to the solution of the problem by clicking on the corresponding button.

On the HP website, you can find information about your printer and instructions on how to improve its performance.

If the printer tells you to install certain utilities, you can do so by going to the Automated Utilities section. Also you can install desired programs from the disk included.

You can find more information in the articles.

Currently, quite often there is a need to translate a document provided in paper form into electronic form. You can get an image that can later be successfully saved on any media or on your computer's hard drive if you use the capabilities of a special HP scanning program. The same software allows you to not only save, but also edit the scanned text information.

An overview of programs for working with HP printers and scanners.

What is a scanning software

Modern users are not satisfied only with the presence of a printer. Many are interested in purchasing a scanner or a multifunctional device (MFP) that can perform the functions of a printer, scanner and copier. The developers of the operating system made sure that each user could perform the simplest operations without the need to install additional software. Easy to handle simple tasks regular funds OS. However, in some cases this functionality is clearly not enough to perform more complex technical tasks. It is in such cases that we suggest paying attention to special programs for the HP printer, with which you can scan documents, obtaining high-quality images.

We hasten to assure you that on the Internet you can find a sufficient number of programs that can be used to work with an HP printer or MFP series. Before downloading any of the options, we recommend that you study the characteristics of each program, evaluate its advantages, weigh the disadvantages, decide on the best option for myself. By the way, utilities that can recognize scanned text are especially popular.

Starting the Scan and Print Process

If you need a program for scanning documents, do not rush to download the first available option. It is important to make sure that the functionality of a particular software allows you to solve your tasks. In particular, there are excellent utilities that allow you to perform high-quality scanning, as well as perform a range of additional manipulations:

• change the scale;
• set a password;
• improve quality;
• set the desired image size ;
• cut;
• set the desired level of contrast, brightness;
• convert scanned material to PDF format.

When purchasing an HP Laserjet printer or scanner from a store, in most cases you will find a CD with the necessary installation software included. After installation on the computer, you can find special program for scanning. This is either "HP ScanJet" or "HP Deskjet", it all depends on which device model you will be using.

By clicking on the program icon, a window will open in which you can initially make settings, and then proceed to direct use. If all the settings completely satisfy you or you have previously managed to make the appropriate changes, then you can immediately start scanning. In the window you will find the "Scan" section. Refocusing your attention on it, you will see that the system offers you two options:

• scanning;
• control.

In the first case, you immediately start the process of obtaining an image, in the second case, you will be prompted to enable scanning through the Control Panel. After starting the scanning process, all that remains is to wait for a message to appear asking you to specify the path to save the finished image. You can also start the scanning process using the button with the scanner icon located on the front of the scanner.

If there is a need to print the finished document, solve such technical task the HP print utility will allow, by launching which it remains to select the parameters of interest. The photo printer software also provides the user with the ability to select specific printing options, including:

• printing a color or black-and-white image;
• seal High Quality or in economy mode;
• printing on photo paper or other paper.

List of programs for scanning

It is possible to use other software, the functionality of which allows you to scan and print text information or images. A popular program is ABBYY FineReader 10 Home Edition, which allows you to scan and recognize text information, save a formatted document. This program supports 178 languages, allows you to send the results by e-mail, as well as, if necessary, spread on the sites. The only downside to this multifunctional all-in-one tool is that you have to pay for such a product. However, this product does not need to be purchased blindly. It is possible to register initially, get the product for free, but only on trial period, and later decide whether such a program is needed or not.

Also enough good product is a program such as OCR CuneiForm, which allows you to convert scanned material into a printed format. The utility is endowed with unique tools that allow you to:

• easy to operate with tabular data;
• carry out text fragmentation in manual and automatic mode.

OCR CuneiForm supports 20 common languages ​​in the world.

If you are interested in a program for high-quality text decoding, then you can pay attention to the Scanitto Pro utility. Its advantages are a simple interface, uncomplicated settings, even a beginner can easily understand them. In addition, scanned text information can be saved in any format, including BMP, TIFF, JPG, PNG, and PDF. At the same time, the program successfully saves texts in DOCX format, TXT and RTF.

If you need to scan a large number of documents, we recommend using ScanLite. This utility saves all settings, ensuring the same type of scanning of the entire batch of documents. Including this program allows you to immediately designate the desired document size by selecting the minimum values ​​in order to be able to easily send documents by e-mail.

There is another great option, PaperScan, which is free to use. It is concentrated a large number of tools with which you can easily change the contrast, brightness, and overlay interesting effects on images.

You can also use other programs endowed with similar functionality. These programs include:

• WinScan2PDF (it is possible to save scanned documents to one file);
• vue scan;
• RiDoc (endowed with the ability to overlay watermarks);
• NAPS2 (capable of reading information from glass tablets);
• Scanned with Corrector A4.

Thus, when it becomes necessary to scan and print documents, even a novice user can easily cope with such a task if he adopts one of the listed utilities.

Setting up an HP printer when connected via USB cable to the computer under Windows control. To get the most out of the supported features of your USB-connected printer, install the HP full feature driver.

Step 1: Prepare your printer setup

Check the requirements and remove any previously installed versions printer in Windows in preparation for setting up a USB connection and installing drivers.

Step 2. Driver installation and connection setup

Download and install the best available print driver to complete the USB connection.

Can I install from the disc that came with the printer?

Yes, but the driver version may be outdated or incompatible with newer operating systems. The disc installs the version of the driver that originally came with the printer.

Make sure that the drivers on the disk are compatible with your OS, especially if you have upgraded your computer. Otherwise, the installation may fail.

What types of drivers are available in HP Software and Driver Downloads?

In chapter . There may be more than one type of driver available for your printer. This guide will help you determine which driver to download.

Note.

Depending on the printer and operating system version, there may not be a driver available for download in the HP download section. If item Installing the printer driver using the built-in Windows Solutions displayed under Driver/Product Installation Software without a download button, click Learn More to install the drivers provided through Windows.

Hewlett-Packard is one of the world's leading printer manufacturers. It won its place in the market not only thanks to high-quality peripherals to output text and graphic information for printing, but also thanks to convenient software solutions to them. Let's look at some popular programs for HP printers and define their features.

One of the most famous applications from Hewlett-Packard for editing and managing pictures in digital formats is Image Zone Photo. This tool works well with the printers of the specified company, as it can be used to easily send images for printing. But its main function is still the processing of the photographs themselves.

You can manage and view pictures in various modes (full screen, single, slide show) in this program using a convenient file manager, and you can change them using the built-in editor. It is possible to rotate the photo, change the contrast, crop, remove red-eye, apply a filter. The ability to create and print albums by distributing photos into built-in layouts stands apart.

At the same time, it should be noted that, in comparison with full-fledged graphic editors and modern photo managers Image Zone Photo significantly loses in terms of functionality. This program does not have Russian-language interface, and she herself has long been considered obsolete and is not supported by manufacturers.

Digital Sending

Digital Sending is the best application for sending digitized information received from Hewlett-Packard devices over the network. With its help, it is possible to digitize paper materials in a number of popular formats (JPEG, PDF, TIFF, etc.), and then send the received information to local network, by e-mail, by fax, via Microsoft SharePoint or upload to a website via an FTP connection. All transmitted data is protected by the SSL/TLS protocol. In addition, this tool also has a number of additional features such as operations analysis and backup.

But this handy application is optimized only for Hewlett-Packard devices, and may cause problems when interacting with printers and scanners from other manufacturers. In addition, users have to purchase a license for each connected device.

Web Jetadmin

Another program for managing peripherals from Hewlett-Packard is Web Jetadmin. Using this tool, you can search and group all devices connected to the local network in one place, update their software and drivers, configure various settings, detect problems in time, and also take some preventive measures to prevent malfunctions.

In addition, the user gets the opportunity to analyze the work performed by collecting data and creating reports. Through the interface named software product You can create user profiles and assign specific roles to them. One of the main functions of Web JetAdmin is print management, which is very useful when there are large queues.

The disadvantages include a rather difficult to understand the work of an ordinary user in it, the program interface. On this moment there is only a version that runs exclusively on 64-bit operating systems. In addition, to download this application, like most other Hewlett-Packard products, you will need to register on the official website.

There are quite a few Hewlett-Packard printer management applications. We have described only a small part of the most popular of them. This diversity is due to the fact that although these applications interact with the same type of devices, they perform various functions. Therefore, when choosing a particular tool, it is important to clearly understand why you will need it.