Setting a ringtone on iPhone. How to set your own ringtone on iPhone

I remember myself in 2008, when the “aluminum” iPhone 2G first came into my hands, my delight knew no bounds. The device was so revolutionary that it took quite a long time to study its capabilities. Sometimes basic procedures for smartphones of that time took quite a lot of time, for example: “ How to set a ringtone on iPhone?". Now for experienced users This is not a problem for iOS devices, but perhaps the information “under the cut” will be useful for beginners.

Of course, it is incorrect to use the verb “set” in relation to a ringtone (ringtone) for iPhone, but so that it is clear to everyone, and even the youngest iPhone owner, we will leave the topic of the instructions unchanged.

How to make a ringtone without iTunes

In fact, the meaning of the word “put” in the context of today’s article includes 2 stages at once:

1. Download ringtone to iPhone;
2. Set ringtone as a ringtone in iPhone.

How to download ringtone to iPhone?

Let's assume that you have local disk already have a computer ringtone file with extension .m4r and you can start downloading the ringtone to iPhone memory. If you don’t yet know how to create ringtones yourself, use our instructions “ “

Ways to download ringtones to iPhone

• By means iTunes;
• Third party file managers.

Downloading a ringtone to iPhone via iTunes

1) Connect iPhone to the computer and launch iTunes;

2) In the main menu " File» select the item « Add a file to your library" And select ringtone file on the local disk. Ringtone will appear in iTunes section Sounds«;

3) Go to main page with settings iTunes sync With iPhone to the section " Sounds". If your iTunes library does not have any ringtones downloaded, the “Sounds” section on the synchronization settings page will be unavailable, remember this;

4) In the “Sounds” section check the box opposite the item " Synchronize sounds“, and then, if desired, you can set the synchronization of only the marked ringtones, or all downloaded to the iTunes library;

5) In the lower right corner of the iTunes window, click on the button Apply«;

6) Wait for synchronization media library contents iTunes from iPhone.

After completing the above steps, your own ringtone will be safely loaded into the iPhone's memory and will become available in iOS Settings.

Downloading a ringtone to iPhone using a file manager

Is it possible to do without iTunes when downloading ringtones (and more) to iPhone? You can, for this there are alternative file managers that allow you to upload and download content (not only music) from the iPhone without synchronizing it with iTunes.

Let's consider the method " how to add a ringtone to iPhone» using iFunBox.

iFunBox is one of the best file managers for iOS devices. Works well with both jailbroken and non-jailbroken devices.

Download iFunBox for iPhone, iPod Touch and iPad [link]

1) Launch iFunBox;

2) B horizontal menu navigation go to the tab " Quick ToolBox«;

3) In the section " Import Files and Data"(Import files and data) click on the icon " User Ringtone» (Custom ringtone);

4) In the program window that appears, click on the “ Click here to browse music files» (Click here to view music files) And open the ringtone file on the local disk of the computer. Ready!

The ringtone file will be successfully downloaded to the iPhone and will become available for selection in iPhone Settings.

How to set a ringtone on iPhone?

The first stage of downloading your own ringtone file to the iPhone is completed, let's proceed to the simplest phase, assign the downloaded ringtone as a ringtone.

1) On iPhone go to Settings -> Sounds-> Section " Sounds and vibration patterns» -> Ringtone;

2) Short tap on the device screen check the box next to the downloaded name ringtone. The ringtone will start playing. Ready!

So, with the help of simple manipulations you can quickly set ringtone in iPhone 4, 5 and any other, the procedure is identical for all iOS devices. If only I had known this back then, in 2008, I could have customized the iPhone “for myself” much faster. Did you find the instructions helpful or did you have any questions? Write in the comments, we will certainly help!

Putting any melody on a call is actually quite simple. To do this, you will need to have a computer and follow the step-by-step instructions below. For calls to the iPhone (iPhone), tracks are installed in the “.m4r” format. You have to make the necessary file yourself and transfer it to the device.

You will need to install iTunes on your computer (almost any system, for example, Mac or PC), and it is best to synchronize it with your iPhone using a cable. So, step by step instructions looks like this:

1. We start working with iTunes. In that program, execute the commands: “File”, and then select “Add file to library” from the menu. At this stage, you will need to find the previously downloaded song on your computer's hard drive and move it to iTunes. You will not be able to perform the operations described below with purchased songs in this song program.

2. The ringtone must be no more than 38 seconds long, so you have to process the song. Listen to the track and select the section that will look best as an incoming call signal. It is best to write down this data so as not to make mistakes.

3. Click with the mouse (right button) on the song name and select the “Information” line in the menu. In the next window, you will need to select the “Options” tab. In it, place markers in the lines “Start” and “Stop time”. Enter the start and end times of the passage you need in the cell next to it. You can even specify milliseconds, which will make the ringtone better. Nothing will happen to the file, but the system will now play only part of it. Then you can simply remove the markers from these lines, the song will play in its entirety. Confirm your actions using the “Ok” button.

4. After this action, right-click on the song name again. In the menu you will need to find and select “Create a version in AAC format”. After this action, an additional track with the same name, but shortened in duration, will appear in the program window.

5. The following instructions will be for Windows. If you have another operating system on a PC, then you need to find similar functions in it. On Windows, you need to go to the Start menu and access the Control Panel. In the window that opens, find “Folder Options” or “Folder Options”. Go to this section of your computer settings, and in the “View” tab, remove the checkbox from the “Hide extensions on registered files” item.

6. Return to iTunes and right-click on the shortened version of the song. IN context menu You must select “Show in Explorer”. You can make it a little simpler - drag the file into any folder, for example, just created on your desktop.

7. In a new window you will see the selected file and its extension “.m4a”.

8. You only need to change one letter to change the spelling of the extension to “.m4r”.

9. Delete the shortened track from iTunes and uncheck the options for the original file.

10. Transfer the file with the extension “.m4r” to iTunes. You will see that a new item will appear in the program - “Sounds”. It will contain the ringtone you created.

11. Sync your iPhone with your computer. The operation can take quite a long time if you have not synchronized your smartphone with your PC for a long time.

12. After completing this procedure, you will find the trimmed track in the “Sounds” folder. Now you can set it as a melody to notify you of an incoming call.

If you want to create several ringtone options for yourself, then the steps listed above will need to be repeated for each song. It won't take much time, and you can enjoy your favorite music on your phone's ringtone completely free of charge.

Users who purchased an iPhone for the first time often cannot figure out how to set it to a ringtone own melody. The fact is that the iPhone has some restrictions regarding ringtones. For example, they must be saved in M4R format and their duration must not exceed 40 seconds.

In this material you will learn how to create a suitable ringtone for iPhone and how to set it to a call. The article will be useful for all users modern models iPhone, including iPhone 4, 4s, 5, 5s, 6, 6s, 7, 8 and iPhone X.

How to create a ringtone for iPhone using iTunes

As mentioned above, the iPhone ringtone must be in M4R format; regular MP3 files or music in other formats will not work. Therefore, in order to use an existing song as a ringtone, you must first prepare it. This can be done in different ways, first we will tell you how this is done using iTunes.

Let's start with the fact that the song you want to set as a ringtone must be in your iTunes library. If it is already there, then everything is fine, you can start preparing the ringtone. If not, download it to your media library first. To do this, open the “Music” section in iTunes and drag necessary files or use the menu “File – Add file to library”. You can read more about how to upload music to the iTunes library.

After the song has been added to the library, you need to right-click on it and select the “Song Information” option.

As a result, a window will open with information about the selected song. Here, in the Options tab, you can trim the song. To do this, enable the “Start” and “End” options and specify the time that will serve as the beginning and end of your ringtone. The time period must be selected so that it does not exceed 40 seconds, otherwise the iPhone will not be able to recognize it as a ringtone. After trimming, do not forget to click on the “Ok” button.

After this, we return to the iTunes library and again select the file that should become a ringtone for the iPhone. At the same time, we do not pay attention to the fact that after trimming the duration of the composition has not changed, this is how it should be. Having selected the file, open the “File” menu and select “Convert – Create a version in AAC format” (in some iTunes versions This menu is called “Convert - Create AAC Version”).

As a result, a copy of it will appear next to the original composition in the library. In this case, the duration of the new file will already be the same as we indicated earlier.

Now you need to right-click on the cropped version of the composition and select “Show in Windows Explorer.”

After this, a folder will open containing the cropped version of the composition. At the same time this file will have the extension m4a. In order for it to be used as a ringtone for an iPhone, its extension must be changed to m4r or, more simply put, renamed so that at the end of the file there is m4r, not m4a.

If file extensions are not displayed for you, then you need to change the settings Windows Explorer. To do this, open the Start menu and enter search query"Folder Options" if you have Windows 7 or "Explorer Options" if you have Windows 10.

In the Explorer options, you need to go to the “View” tab, disable the “Hide extensions” option and save the settings by clicking on the “OK” button. After this, you can change the ringtone extension from m4r to m4a.

After changing the extension, the ringtone is ready and can be loaded into the iPhone’s memory. How this is done will be discussed at the end of the article. In the meantime alternative way creating ringtones without using iTunes and without renaming files.

How to create a ringtone for iPhone without iTunes

If you can’t figure out the method of creating a ringtone described above, then you can take a different route. You can create a ringtone for iPhone using online converter.

To do this, go to the website mp3cut.ru and click on the “Open file” button.

After this, a window will open to select a file. Here you need to select a composition for the ringtone and click on the “Open” button.

After this, the composition you have chosen will open in the mp3cut.ru interface. At this stage, you need to trim the composition so that you get a ringtone no longer than 40 seconds. To do this, place blue marks at the beginning and end of the segment that should become a ringtone.

After that, activate the “Ringtone for iPhone” option. This way you tell the site that you want to receive the ringtone in m4r format.

Now, in order to get a finished ringtone, click on the “Cut” button.

At the end, you just need to click on the “Download” button and download the ready-to-use iPhone ringtone to your computer.

How to set a ringtone on iPhone

No matter how you get a ringtone in m4r format, at the end you still need to load it into the iPhone’s memory. IN latest versions iTunes does this quite simply. To do this, you need to launch iTunes, and click on the device icon that appears in the left top corner iTunes programs.

After this, you need to go to the “Sounds” section and simply drag the ringtone in m4r format to the list.

The ringtone download will start automatically immediately after dragging. After the download is complete, all you have to do is set this ringtone to your iPhone. To do this, open the settings and go to the “Sounds” section.

Then you need to open the “Ringtone” subsection and select one of the available ringtones.

If everything was done correctly, the song that was downloaded via iTunes will appear in the list of ringtags.

The easiest way to get an interesting ringtone is to download it from the Internet. Moreover, there are really a huge number of ready-made ringtones. However, if you were unable to find a worthwhile one, then you can supplement it via iTunes yourself from the part of the song that you liked. And now we will tell you what is needed for this.

In fact, the process is extremely simple. Everything can be resolved in just a few clicks of the computer mouse. Even if this is your first iPhone and you know nothing about Apple devices, there will be no problems!

Add your own ringtone using iTunes

Don’t look at the fact that there are too many points in this instruction – there’s really nothing complicated. We have broken it down into the most detailed parts so that you do not have any problems or questions.

If you have just become happy owner modern gadget iPhone, then you probably started to worry about the question of how to put a song on your iPhone as a ringtone. And if everything is really so, then let's learn how to do it together. As you already know, in regular phone everything is done in an elementary and simple way: select the ringtone you like and, after the necessary settings, set it as a ringtone. With the iPhone, everything is completely different. After all, in order to incoming call made itself felt by your favorite composition, you need to work a little.

How to put a song on iPhone as a ringtone

So, in order for a cool melody to sound in your super fashionable gadget, you will need the iPhone itself, a USB cable and the iTunes program installed on your computer/laptop. You can, of course, use such a utility in the iPhone itself, so as not to resort to connecting to a PC. But this option is not the best, since the iTunes program installed in it requires small financial costs. So, let's first look at how to download a song to an iPhone, and then how to set it as a ringtone.

Course of action

1. Download from the official Apple developer website iTunes program, and then install it on your computer.
2. Connect iPhone to PC.
3. Launch iTunes. Now drag all the songs that interest you into the window of this program.
4. Go to the section labeled "iPhone".
5. Click on the "Music" tab and check the boxes for all the songs that you want to add to your gadget.
6. Click the “sync” button and wait for the process to complete.
7. Disconnect iPhone from PC.

Now you know how to download ringtones. Now all that remains is to learn how to put a song on your iPhone as a ringtone.

Procedure

1. Use a USB cable to connect your iPhone to your computer.
2. Run iTunes app and move into it the melody that you want to ring.
3. Right-click on the selected song and click on the "Details" line.
4. In the window that appears, go to the "Options" tab, find the line with the word "End", check the box and mark the end time of the track being played. Save the result by pressing the "OK" key.
5. Again, right-click on the song and select "Create version in If everything is done correctly, you will see that a second track has appeared in the list. Its name will be exactly the same as the main song. The only thing that will differ is This is playback time.

Create a ringtone for iPhone

So, in the previous steps we created a track, that is, we selected a specific excerpt from the song. All that remains is to make this composition a ringtone for your call. To do this, follow a few more steps:

That's all, all you have to do is enter the sound settings on your phone, and you will see that the ringtone you created has appeared in the list, which can easily be set to a call. As you can see, it's not that difficult. Now, having a computer, a USB cable and an iPhone at hand, you will not have any difficulties with how to put a song on your iPhone as a ringtone.